The uplift pressure on the face of a drainage gallery in a dam is taken as (A) Hydrostatic pressure at toe (B) Average of hydrostatic pressure at toe and heel (C) Two-third of hydrostatic pressure at toe plus one-third of hydrostatic pressure at heel (D) None of the above

The uplift pressure on the face of a drainage gallery in a dam is taken as
(A) Hydrostatic pressure at toe
(B) Average of hydrostatic pressure at toe and heel
(C) Two-third of hydrostatic pressure at toe plus one-third of hydrostatic pressure at heel
(D) None of the above
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The uplift pressure on a dam can be controlled by (i) Constructing cut-off under upstream face (ii) Constructing drainage channels between the dam and its foundation (iii) By pressure grouting in foundation The correct answer is (A) Only (i) (B) Both (i) and (ii) (C) Both (i) and (iii) (D) (i), (ii) and (iii)

Description : The uplift pressure on a dam can be controlled by (i) Constructing cut-off under upstream face (ii) Constructing drainage channels between the dam and its foundation (iii) By pressure grouting in foundation The correct answer is ... ) and (ii) (C) Both (i) and (iii) (D) (i), (ii) and (iii)

Last Answer : Answer: Option D

When the reservoir is full, the maximum compressive force in a gravity dam is produced (A) At the toe (B) At the heel (C) Within the middle third of base (D) At centre of base

Description : When the reservoir is full, the maximum compressive force in a gravity dam is produced (A) At the toe (B) At the heel (C) Within the middle third of base (D) At centre of base

Last Answer : Answer: Option A

The toe projection of foundation slabs is taken (A) As one third of the base (B) As one sixth of overall height of the wall (C) Equal to heel slab (D) Below ground surface

Description : The toe projection of foundation slabs is taken (A) As one third of the base (B) As one sixth of overall height of the wall (C) Equal to heel slab (D) Below ground surface

Last Answer : Answer: Option A

A concrete dam 15 m deep and 2 m wide containing water to a depth of 10 m .Find total hydrostatic pressure per meter run and centre of pressure on upstream face.

Description : A concrete dam 15 m deep and 2 m wide containing water to a depth of 10 m .Find total hydrostatic pressure per meter run and centre of pressure on upstream face.

Last Answer : A concrete dam 15 m deep and 2 m wide containing water to a depth of 10 m .Find total hydrostatic pressure per meter run and centre of pressure on upstream face.

The major resisting force in a gravity dam is (A) Water pressure (B) Wave pressure (C) Self-weight of dam (D) Uplift pressure

Description : The major resisting force in a gravity dam is (A) Water pressure (B) Wave pressure (C) Self-weight of dam (D) Uplift pressure

Last Answer : Answer: Option C

A phreatic line is defined as the line within a dam section below which there are (A) Positive equipotential lines (B) Positive hydrostatic pressure (C) Negative hydrostatic pressure (D) Negative equipotential lines

Description : A phreatic line is defined as the line within a dam section below which there are (A) Positive equipotential lines (B) Positive hydrostatic pressure (C) Negative hydrostatic pressure (D) Negative equipotential lines

Last Answer : (B) Positive hydrostatic pressure

Consider the following statements: 1. Mathematically speaking, the time taken for 100% consolidation is infinite. 2. The time factor for a particular average degree of consolidation depends upon the distribution of initial excess hydrostatic pressure. 3. Secondary consolidation obeys Terzaghi’s one-dimensional theory of consolidation. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Mathematically speaking, the time taken for 100% consolidation is infinite. 2. The time factor for a particular average degree of consolidation depends upon the distribution of initial excess hydrostatic ... 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

Pick up the incorrect statement from the following: (A) In the stem of a retaining wall, reinforcement is provided near the earth side (B) In the toe slab of a retaining wall, reinforcement is provided at the bottom of the slab (C) In the heel slab of a retaining wall, reinforcement is provided at the top of the slab (D) None of these

Description : Pick up the incorrect statement from the following: (A) In the stem of a retaining wall, reinforcement is provided near the earth side (B) In the toe slab of a retaining wall, reinforcement is ... slab of a retaining wall, reinforcement is provided at the top of the slab (D) None of these

Last Answer : Answer: Option D

A rail which is tapered to a toe at one end and has a heel at the other end is called as : a) Stock rail b) Tongue rail c) Wing rail d) Lead rail

Description : A rail which is tapered to a toe at one end and has a heel at the other end is called as : a) Stock rail b) Tongue rail c) Wing rail d) Lead rail

Last Answer : b) Tongue rail

i have narrow heel with regular in toe where can i find shoe store that carries such shoes.?

Description : i have narrow heel with regular in toe where can i find shoe store that carries such shoes.?

Last Answer : where can i find shoes with b width in base but need narrower heel

The low temperature reservoir of the heat reservoirs is known as ______.  A. Source reservoir  B. Heel reservoir  C. Toe reservoir  D. Sink reservoir

Description : The low temperature reservoir of the heat reservoirs is known as ______.  A. Source reservoir  B. Heel reservoir  C. Toe reservoir  D. Sink reservoir

Last Answer : Sink reservoir

Seepage through foundation in an earthen dam is controlled by providing (A) Rock toe (B) Horizontal blanket (C) Impervious cut off (D) Chimney drain

Description : Seepage through foundation in an earthen dam is controlled by providing (A) Rock toe (B) Horizontal blanket (C) Impervious cut off (D) Chimney drain

Last Answer : Answer: Option C

Seepage through embankments in an earthen dam is controlled by (A) Drainage filters (B) Relief wells (C) Drain trenches (D) Provision of downstream berms

Description : Seepage through embankments in an earthen dam is controlled by (A) Drainage filters (B) Relief wells (C) Drain trenches (D) Provision of downstream berms

Last Answer : Answer: Option C

The main reinforcement in the heel of a T-shaped R.C. retaining wall is provided on (A) Top face perpendicular to wall (B) Bottom face perpendicular to wall (C) Both top and bottom faces perpendicular to wall (D) None of these

Description : The main reinforcement in the heel of a T-shaped R.C. retaining wall is provided on (A) Top face perpendicular to wall (B) Bottom face perpendicular to wall (C) Both top and bottom faces perpendicular to wall (D) None of these

Last Answer : Answer: Option A

What pressure does ASME B16.5 limit flanged fittings to during system hydrostatic testing? a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class. c) The maximum pressure rating for the flange. d) The flange class plus 250psi.

Description : What pressure does ASME B16.5 limit flanged fittings to during system hydrostatic testing? a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class. c) The maximum pressure rating for the flange. d) The flange class plus 250psi.

Last Answer : a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class.

The resultant upward pressure of the fluid on an immersed body due to its tendency to uplift the submerged body is called (A) Up-thrust (B) Reaction (C) Buoyancy (D) Metacentre

Description : The resultant upward pressure of the fluid on an immersed body due to its tendency to uplift the submerged body is called (A) Up-thrust (B) Reaction (C) Buoyancy (D) Metacentre

Last Answer : Answer: Option C

If the failure of a finite slope occurs through the toe, it is known as (A) Slope failure (B) Face failure (C) Base failure (D) Toe failure

Description : If the failure of a finite slope occurs through the toe, it is known as (A) Slope failure (B) Face failure (C) Base failure (D) Toe failure

Last Answer : (D) Toe failure

The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) Bottom face perpendicular to the wall The correct answer is (A) Only (ii) is correct (B) (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Description : The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) ... (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Last Answer : Answer: Option D

Ebay question: Is Gallery Plus really worth the extra money?

Description : Ebay question: Is Gallery Plus really worth the extra money?

Last Answer : I never use the gallery plus, and I have about a 90% success rate in my sales on ebay.

The maximum pressure which the pipe can withstand without any leakage during hydrostatic pressure test, is called (A) Working pressure (B) Design pressure (C) Test pressure (D) Hydrostatic pressure

Description : The maximum pressure which the pipe can withstand without any leakage during hydrostatic pressure test, is called (A) Working pressure (B) Design pressure (C) Test pressure (D) Hydrostatic pressure

Last Answer : (C) Test pressure

Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Description : Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Last Answer : (D) All the above

Flow net is used for the determination of (A) Quantity of seepage (B) Hydrostatic pressure (C) Seepage pressure (D) All the above

Description : Flow net is used for the determination of (A) Quantity of seepage (B) Hydrostatic pressure (C) Seepage pressure (D) All the above

Last Answer : (D) All the above

Pick up the incorrect statement from the following: (A) The smaller the size of the pores, the higher the water can rise above the water table (B) Below the water table, the pore water may be static (C) The hydrostatic pressure depends on the depth below the water level (D) None of these

Description : Pick up the incorrect statement from the following: (A) The smaller the size of the pores, the higher the water can rise above the water table (B) Below the water table, the pore water may be static (C) The hydrostatic pressure depends on the depth below the water level (D) None of these

Last Answer : Answer: Option D

The pressure that builds up in pore water due to load increment on the soil, is termed (A) Excess pore pressure (B) Excess hydrostatic pressure (C) Hydrodynamic pressure (D) All the above

Description : The pressure that builds up in pore water due to load increment on the soil, is termed (A) Excess pore pressure (B) Excess hydrostatic pressure (C) Hydrodynamic pressure (D) All the above

Last Answer : Answer: Option D

A flow net may be utilised for the determination of (A) Exit gradient (B) Seepage (C) Hydrostatic pressure (D) All the above

Description : A flow net may be utilised for the determination of (A) Exit gradient (B) Seepage (C) Hydrostatic pressure (D) All the above

Last Answer : Answer: Option D

Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component acts through the center of pressure for the vertical projection (C) The vertical component of the hydrostatic force on any surface is equal to the weight of the volume of the liquid above the area (D) The vertical component passes through the center of pressure of the volume

Description : Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component ... above the area (D) The vertical component passes through the center of pressure of the volume

Last Answer : Answer: Option D

Due to the impact of water wave on a sea shore structure (A) Hydrostatic pressure coupled with a strong momentary impact is caused (B) Vibrations are subjected (C) Internal pressure is developed (D) All of the above

Description : Due to the impact of water wave on a sea shore structure (A) Hydrostatic pressure coupled with a strong momentary impact is caused (B) Vibrations are subjected (C) Internal pressure is developed (D) All of the above

Last Answer : (D) All of the above

During consolidation process of clayey soils, indicate the sequence of occurrence of the following events in the order from first to last : 1. Load being taken up by the pore water 2. Load being taken up by the soil grains 3. Drainage of water from the pores of the soil (a) 1, 2 and 3 (b) 2, 3 and 1 (c) 1, 3 and 2 (d) 2, 1 and 3

Description : During consolidation process of clayey soils, indicate the sequence of occurrence of the following events in the order from first to last : 1. Load being taken up by the pore water 2. Load being taken up by the soil grains 3. Drainage of ... 1, 2 and 3 (b) 2, 3 and 1 (c) 1, 3 and 2 (d) 2, 1 and 3

Last Answer : (c) 1, 3 and 2

If an image is saved in WhatsApp images and WhatsApp sent images but not on your phone gallery does that mean the image was not taken using the phone.?

Description : If an image is saved in WhatsApp images and WhatsApp sent images but not on your phone gallery does that mean the image was not taken using the phone.?

Last Answer : I’m pretty sure if I take the image in WhatsApp it doesn’t save to my photos in my phone. You probably can save a WhatsApp image to your photo gallery in your phone if you want to.

Is randy orton a face or heel?

Description : Is randy orton a face or heel?

Last Answer : he was a heel until the royal rummble but now he is a face

12. The tendency of a liquid to uplift a submerged body, because of the upward thrust of the liquid, is known as buoyancy. A) Agree B) Disagree

Description : 12. The tendency of a liquid to uplift a submerged body, because of the upward thrust of the liquid, is known as buoyancy. A) Agree B) Disagree

Last Answer : A

Pick up the correct statement from the following: (A) Large solids carried along the river bed, is known as bed load (B) The fine sediment deposits are generally near the face of the dam (C) Deposition of sediment in the reservoir, reduces the capacity of the reservoir (D) All the above

Description : Pick up the correct statement from the following:  (A) Large solids carried along the river bed, is known as bed load  (B) The fine sediment deposits are generally near the face of ... ) Deposition of sediment in the reservoir, reduces the capacity of the reservoir  (D) All the above 

Last Answer : (D) All the above 

A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the  base, has vertical water face. The minimum stress at the base of the dam when the reservoir is  full, will be  (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Last Answer : (C) 7500 N/m

For the upstream face of an earthen dam, the most adverse condition for stability of slope is (A) Sudden drawdown (B) Steady seepage (C) During construction (D) Sloughing of slope

Description : For the upstream face of an earthen dam, the most adverse condition for stability of slope is (A) Sudden drawdown (B) Steady seepage (C) During construction (D) Sloughing of slope

Last Answer : Answer: Option A

Yield of a drainage basin is: (A) Run off of the area expressed as instantaneous rate (B) Average run off over a short period (C) Total volume of water flowing annually (D) All the above

Description : Yield of a drainage basin is: (A) Run off of the area expressed as instantaneous rate (B) Average run off over a short period (C) Total volume of water flowing annually (D) All the above

Last Answer : (C) Total volume of water flowing annually

The form factor of a drainage basin is obtained by dividing (A) Area of the basin by the axial length (B) Average width of the basin by the axial basin (C) Area of the basin by the square of the axial length (D) Both (b) and (c

Description : The form factor of a drainage basin is obtained by dividing (A) Area of the basin by the axial length (B) Average width of the basin by the axial basin (C) Area of the basin by the square of the axial length (D) Both (b) and (c

Last Answer : Answer: Option D

The elevation Z of the watershed is: (where letters carry their usual meanings) (A) Reduced level of the top most point of the basin (B) Reduced level of the lower most point of the basin (C) Average elevation of the highest and lowest point of the drainage basin (D) Obtained by the formula Z = + + + anzn)/A

Description : The elevation Z of the watershed is: (where letters carry their usual meanings) (A) Reduced level of the top most point of the basin (B) Reduced level of the lower most point of the basin (C) Average ... highest and lowest point of the drainage basin (D) Obtained by the formula Z = + + + anzn)/A

Last Answer : Answer: Option D

What does it mean when the second (and even the third) toes are longer than the big toe?

Description : What does it mean when the second (and even the third) toes are longer than the big toe?

Last Answer : answer:I think that when the second toe is longer then the big toe, it's called Mortons Toe. Here's a medical description, Morton's toe leads to excessive pressure on the second metatarsal head ( ... pressure. I'd figure having the third toe longer too would just be more of the same situation.

In a triaxial compression test when drainage is allowed during the first stage (i. e. application of cell pressure) only and not during the second stage (i.e. application of deviator stress at constant cell pressure), the test is known as (A) Consolidated drained test (B) Consolidated undrained test (C) Unconsolidated drained test (D) Unconsolidated undrained test

Description : In a triaxial compression test when drainage is allowed during the first stage (i. e. application of cell pressure) only and not during the second stage (i.e. application of deviator ... test (B) Consolidated undrained test (C) Unconsolidated drained test (D) Unconsolidated undrained test

Last Answer : (B) Consolidated undrained test

For shear strength, triaxial shear test is suitable because (A) It can be performed under all three drainage conditions (B) Precise measurement of the pore pressure and volume change during the test is possible (C) Stress distribution on the failure plane, is uniform (D) All the above

Description : For shear strength, triaxial shear test is suitable because (A) It can be performed under all three drainage conditions (B) Precise measurement of the pore pressure and volume change during the test is possible (C) Stress distribution on the failure plane, is uniform (D) All the above

Last Answer : (D) All the above

If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is known as (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Description : If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is ... (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Last Answer : Answer: Option B

direct shear test possesses the following disadvantage: (A) A relatively thin thickness of sample permits quick drainage (B) A relatively thin thickness of sample permits quick dissipation of pore pressure developed during the test (C) As the test progresses the area under shear, gradually changes (D) None of these

Description : direct shear test possesses the following disadvantage: (A) A relatively thin thickness of sample permits quick drainage (B) A relatively thin thickness of sample permits quick dissipation of pore pressure ... C) As the test progresses the area under shear, gradually changes (D) None of these

Last Answer : Answer: Option C

A triaxial shear test is preferred to direct shear test, because (A) It can be performed under all three drainage conditions with complete control (B) Precise measurement of pore pressure and change in volume during test, is not possible (C) Stress distribution on the failure plane, is non uniform (D) None of these

Description : A triaxial shear test is preferred to direct shear test, because (A) It can be performed under all three drainage conditions with complete control (B) Precise measurement of pore pressure and change in ... possible (C) Stress distribution on the failure plane, is non uniform (D) None of these

Last Answer : Answer: Option A

The following are true about lacrimal gland: a. the palpebral part drains into the superior conjunctival fornix through 12 ducts b. the palpebral part of the gland is 1/3 the size of the orbital part c. excision of palpebral but no the orbital part abolish the tear secretion by the glandd. it receives secretomotor nerve from the third cranial nerve e. the lymphatic drainage is to parotid gland

Description : The following are true about lacrimal gland: a. the palpebral part drains into the superior conjunctival fornix through 12 ducts b. the palpebral part of the gland is 1/3 the size of the ... it receives secretomotor nerve from the third cranial nerve e. the lymphatic drainage is to parotid gland

Last Answer : the palpebral part drains into the superior conjunctival fornix through 12 ducts

In a cantilever retaining wall without a heel slab (A) Thickness of the stem is kept same throughout (B) Base slab is made 10 cm thicker than the stem (C) Width of the base slab is kept 0.7 time the total height of the wall (D) All the above

Description : In a cantilever retaining wall without a heel slab (A) Thickness of the stem is kept same throughout (B) Base slab is made 10 cm thicker than the stem (C) Width of the base slab is kept 0.7 time the total height of the wall (D) All the above

Last Answer : Answer: Option D

The design of heel slab of a retaining wall is based on the maximum bending moment due to: (A) Its own weight (B) Weight of the soil above it (C) Load of the surcharge, if any (D) All the above

Description : The design of heel slab of a retaining wall is based on the maximum bending moment due to: (A) Its own weight (B) Weight of the soil above it (C) Load of the surcharge, if any (D) All the above

Last Answer : Answer: Option D

In case the factor of safety against sliding is less than 1.5, a portion of slab is constructed downwards at the end of the heel slab, which is known as (A) A key (B) A cut-off wall (C) A rib (D) All the above

Description : In case the factor of safety against sliding is less than 1.5, a portion of slab is constructed downwards at the end of the heel slab, which is known as (A) A key (B) A cut-off wall (C) A rib (D) All the above

Last Answer : Answer: Option D

A square surface 3 m × 3 m lies in a vertical line in water pipe its upper edge at water surface. The hydrostatic force on square surface is (A) 9,000 kg (B) 13,500 kg (C) 18,000 kg (D) 27,000 kg

Description : A square surface 3 m × 3 m lies in a vertical line in water pipe its upper edge at water surface. The hydrostatic force on square surface is (A) 9,000 kg (B) 13,500 kg (C) 18,000 kg (D) 27,000 kg

Last Answer : Answer: Option B

In counterfort type retaining walls (i) The vertical slab is designed as a continuous slab (ii) The heel slab is designed as a continuous slab (iii) The vertical slab is designed as a cantilever (iv) The heel slab is designed as a cantilever The correct answer is (A) (i) and (ii) (B) (i)and(iv) (C) (ii) and (iii) (D) (iii) and (iv)

Description : In counterfort type retaining walls (i) The vertical slab is designed as a continuous slab (ii) The heel slab is designed as a continuous slab (iii) The vertical slab is designed as a cantilever (iv) The heel slab is designed ... (ii) (B) (i)and(iv) (C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : Answer: Option A

Raft foundations are used for: (A) Providing increased area of foundation over poor bearing capacity of soil (B) Spanning over small soft or loose pockets (C) Counter acting the hydrostatic effect (D) All the above

Description : Raft foundations are used for: (A) Providing increased area of foundation over poor bearing capacity of soil (B) Spanning over small soft or loose pockets (C) Counter acting the hydrostatic effect (D) All the above

Last Answer : Answer: Option D