On the sea shore structures, the water wave impact causes (A) Direct compressive force due to its horizontal component (B) Shear force due to deflected vertical force (C) Compressive force due to collapse of the wave (D) All of the above

On the sea shore structures, the water wave impact causes
(A) Direct compressive force due to its horizontal component
(B) Shear force due to deflected vertical force
(C) Compressive force due to collapse of the wave
(D) All of the above
by

1 Answer

Answer :

(D) All of the above
by

Related questions

Due to the impact of water wave on a sea shore structure (A) Hydrostatic pressure coupled with a strong momentary impact is caused (B) Vibrations are subjected (C) Internal pressure is developed (D) All of the above

Description : Due to the impact of water wave on a sea shore structure (A) Hydrostatic pressure coupled with a strong momentary impact is caused (B) Vibrations are subjected (C) Internal pressure is developed (D) All of the above

Last Answer : (D) All of the above

Which of the following type of sea walls results in greatest protection of shore structures? (A) Vertical sea wall (B) Sea wall with batter (C) Stepped sea wall (D) Sea wall with concave face

Description : Which of the following type of sea walls results in greatest protection of shore structures? (A) Vertical sea wall (B) Sea wall with batter (C) Stepped sea wall (D) Sea wall with concave face

Last Answer : (D) Sea wall with concave face

Littoral drift (A) Is the raised line of sand, parallel to the sea coast (B) Is the slow movement of surface water at sea caused by the wind (C) Is a current parallel to the shore, caused due to tangential component of the wind (D) Is a current perpendicular to the shore line caused due to wind

Description : Littoral drift (A) Is the raised line of sand, parallel to the sea coast (B) Is the slow movement of surface water at sea caused by the wind (C) Is a current parallel to the shore, caused due to tangential component of the wind (D) Is a current perpendicular to the shore line caused due to wind

Last Answer : (C) Is a current parallel to the shore, caused due to tangential component of the wind

Which of the following structures are constructed parallel to shore line to develop a demarcating line between land area and water area? (A) Sea walls, bulk heads and groynes (B) Sea walls, bulk heads and revetments (C) Sea walls, revetments and groynes (D) Bulk heads, revetments and groynes

Description : Which of the following structures are constructed parallel to shore line to develop a demarcating line between land area and water area? (A) Sea walls, bulk heads and groynes (B) Sea walls, bulk heads and revetments (C) Sea walls, revetments and groynes (D) Bulk heads, revetments and groynes

Last Answer : (B) Sea walls, bulk heads and revetments

The centroid of compressive force, from the extreme compression fiber, in limit state design lies at a distance of (A) 0.367 xu (B) 0.416 xu (C) 0.446 xu (D) 0.573 xu Where xu is the depth of neutral axis at the limit state of collapse

Description : The centroid of compressive force, from the extreme compression fiber, in limit state design lies at a distance of (A) 0.367 xu (B) 0.416 xu (C) 0.446 xu (D) 0.573 xu Where xu is the depth of neutral axis at the limit state of collapse

Last Answer : Answer: Option B

Which of the following structures protects the shore by trapping of littoral drift? (A) Groynes (B) Sea walls (C) Revetments (D) Moles

Description : Which of the following structures protects the shore by trapping of littoral drift? (A) Groynes (B) Sea walls (C) Revetments (D) Moles

Last Answer : (A) Groynes

Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component acts through the center of pressure for the vertical projection (C) The vertical component of the hydrostatic force on any surface is equal to the weight of the volume of the liquid above the area (D) The vertical component passes through the center of pressure of the volume

Description : Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component ... above the area (D) The vertical component passes through the center of pressure of the volume

Last Answer : Answer: Option D

Which one of the following statements is not relevant to hydrographic survey? (A) Establishment of a chain of bench marks near the shore line (B) Establishment of horizontal control points on the shore (C) Determination of the sea bed profile (D) None of these

Description : Which one of the following statements is not relevant to hydrographic survey? (A) Establishment of a chain of bench marks near the shore line (B) Establishment of horizontal control points on the shore (C) Determination of the sea bed profile (D) None of these

Last Answer : (D) None of these

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Description : If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Last Answer : (B) 45°

Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) The on-shore wind helps to produce wave action as well as rise of M.S.L. (C) A falling hydraulic gradient occurs in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

While designing screw threads, adequate length of engaged threads between the screw and nut is provided so as to prevent failure of threads due to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Description : While designing screw threads, adequate length of engaged threads between the screw and nut is provided so as to prevent failure of threads due to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (A) Direct shear stress

For any part of a beam subjected to uniformly distributed load, Shear force diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : For any part of a beam subjected to uniformly distributed load, Shear force diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : 7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : Na

Assertion A: Large size stones are required in stone revetment in shore protection. Reason R: Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone. Select your answer based on the coding system given below. (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not a correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Large size stones are required in stone revetment in shore protection. Reason R: Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone. ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is the correct explanation of A

If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Description : If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Last Answer : (A) Compressive force

When the steel bars are embedded in concrete. The concrete after setting, adheres to the surface of the bars and thus resist any force that tends to pull or push this road. The intensity of this adhesive force is called. (a) Bond stress (b) Shear stress (c) Compressive stress (d) All of these

Description : When the steel bars are embedded in concrete. The concrete after setting, adheres to the surface of the bars and thus resist any force that tends to pull or push this road. The intensity of this adhesive force is called. (a) Bond stress (b) Shear stress (c) Compressive stress (d) All of these

Last Answer : (a) Bond stress

In a square beam loaded longitudinally, shear develops (A) On middle fibre along horizontal plane (B) On lower fibre along horizontal plane (C) On top fibre along vertical plane (D) Equally on each fibre along horizontal plane

Description : In a square beam loaded longitudinally, shear develops (A) On middle fibre along horizontal plane (B) On lower fibre along horizontal plane (C) On top fibre along vertical plane (D) Equally on each fibre along horizontal plane

Last Answer : (D) Equally on each fibre along horizontal plane (D) Equally on each fibre along horizontal plane

In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes

Description : In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes

Last Answer : (D) All planes except horizontal and vertical planes

The shear reinforcement in R.C.C. is provided to resist (A) Vertical shear (B) Horizontal shear (C) Diagonal compression (D) Diagonal tension

Description : The shear reinforcement in R.C.C. is provided to resist (A) Vertical shear (B) Horizontal shear (C) Diagonal compression (D) Diagonal tension

Last Answer : Answer: Option D

The direct shear test suffers from the following disadvantage: (A) Drain condition cannot be controlled (B) Pore water pressure cannot be measured (C) Shear stress on the failure plane is not uniform (D) The area under the shear and vertical loads does not remain constant throughout the test

Description : The direct shear test suffers from the following disadvantage: (A) Drain condition cannot be controlled (B) Pore water pressure cannot be measured (C) Shear stress on the failure plane is not uniform (D) The area under the shear and vertical loads does not remain constant throughout the test

Last Answer : Answer: Option C

For a beam having fixed ends, the unknown element of the reactions, is (A) Horizontal components at either end (B) Vertical components at either end (C) Horizontal component at one end and vertical component at the other (D) Horizontal and vertical components at both the ends

Description : For a beam having fixed ends, the unknown element of the reactions, is  (A) Horizontal components at either end  (B) Vertical components at either end  (C) Horizontal component at one end and vertical component at the other  (D) Horizontal and vertical components at both the ends 

Last Answer : (D) Horizontal and vertical components at both the ends 

Explain the rebound hammer test procedure and show the relationship between compressive strength and rebound number with hammer horizontal and vertical on dry and wet surface of concrete.

Description : Explain the rebound hammer test procedure and show the relationship between compressive strength and rebound number with hammer horizontal and vertical on dry and wet surface of concrete.

Last Answer : Rebound Hammer Test: i. Initially the plunger of rebound hammer is Kept touching to the target concrete surface ii. Then the tubular casing of hammer is pushed towards concrete, so that the spring gets ... of concrete will be less, But if it is more, then concrete possess sufficient strength.

The spokes of the flywheel are subjected to 1. direct shear stress 2. torsional shear stress 3. tensile stress 4. compressive stress

Description : The spokes of the flywheel are subjected to 1. direct shear stress 2. torsional shear stress 3. tensile stress 4. compressive stress

Last Answer : 3. tensile stress

The rim of the flywheel is subjected to, 1. direct tensile stress and bending stress 2. torsional shear stress and bending stress 3. direct shear stress and bending stress 4. compressive stress and bending stress

Description : The rim of the flywheel is subjected to, 1. direct tensile stress and bending stress 2. torsional shear stress and bending stress 3. direct shear stress and bending stress 4. compressive stress and bending stress

Last Answer : 1. direct tensile stress and bending stress

The spokes of the flywheel are subjected to, (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Description : The spokes of the flywheel are subjected to, (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (C) Tensile stress

When a nut is tightened by placing a washer below it, the threads of bolt are subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Description : When a nut is tightened by placing a washer below it, the threads of bolt are subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (A) Direct shear stress

When a nut is tightened by placing a washer below it, the shank of bolt is subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Description : When a nut is tightened by placing a washer below it, the shank of bolt is subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (C) Tensile stress

For winds that last six hours or more, such as a midlatitude storm, the air movement is modified by which causes the air to be deflected to . (a) Hydrostatic Force; the right in the Northern Hemisphere (b) Coriolis Force; the right in the Northern Hemisphere (c) Friction; the left in the Northern Hemisphere (d) Coriolis Force; the left in the Northern Hemisphere

Description : For winds that last six hours or more, such as a midlatitude storm, the air movement is modified by which causes the air to be deflected to . (a) Hydrostatic Force; the right in the ... c) Friction; the left in the Northern Hemisphere (d) Coriolis Force; the left in the Northern Hemisphere

Last Answer : (b) Coriolis Force; the right in the Northern Hemisphere

In direct method of contouring, the process of locating or identifying points lying on a contour is called (A) Ranging (B) Centring (C) Horizontal control (D) Vertical control

Description : In direct method of contouring, the process of locating or identifying points lying on a contour is called (A) Ranging (B) Centring (C) Horizontal control (D) Vertical control

Last Answer : (D) Vertical control

Pick up the correct statement from the following: (A) When the electric field oscillates in the direction of the electric vector, a plane polarised wave is formed (B) When the electric vector is in the plane of incidence, vertical polarisation is formed (C) When the electric vector is at right angles to the plane of incidence, horizontal polarization wave is formed (D) All of these

Description : Pick up the correct statement from the following: (A) When the electric field oscillates in the direction of the electric vector, a plane polarised wave is formed (B) When the electric vector is ... right angles to the plane of incidence, horizontal polarization wave is formed (D) All of these

Last Answer : Answer: Option D

What is the indication of shear slump and collapse slump in slump tests?

Description : What is the indication of shear slump and collapse slump in slump tests?

Last Answer : There are three types of slump that may occur in slumps test, namely, true slump, shear slump and collapse slump. True slump refers to general drop of the concrete mass ... concrete. Collapse slump indicates that concrete mix is too wet ad the mix is deemed to be harsh and lean.

Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section (C) Distance of the C.G. of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Description : Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section ... . of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Last Answer : Answer: Option D

An ELECTRON moving horizontally along the +x axis enters a region of space with a horizontal uniform magnetic field pointing in the +y direction. The electron will be deflected: w) -y direction x) +y direction y) -z direction z) +z direction

Description : An ELECTRON moving horizontally along the +x axis enters a region of space with a horizontal uniform magnetic field pointing in the +y direction. The electron will be deflected: w) -y direction x) +y direction y) -z direction z) +z direction

Last Answer : ANSWER: Y -- -Z DIRECTION

The horizontal angles from the boat between A and B and B and C, the stations on the shore are 1 2. The distances AB = L1 and BC = L2 2 at C between the boat and station B between A and C at B). (A) 1 2) = (L2 1/L1 2) = K (B) t 2 = 360° - 1 2 (C) 2 = sin /(K + ) (D) All the above

Description : The horizontal angles from the boat between A and B and B and C, the stations on the shore are 1 2. The distances AB = L1 and BC = L2 2 at C between the boat and station B between A and C at B). (A) 1 2) = (L2 1/L1 2) = K (B) t 2 = 360° - 1 2 (C) 2 = sin /(K + ) (D) All the above

Last Answer : (D) All the above

When the helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (D) Torsional shear stress

When the helical extension spring is subjected to axial tensile force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical extension spring is subjected to axial tensile force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (D) Torsional shear stress

The force that holds two particles of the different kind together is called as a) Adhesion c) Shear force b) Cohesion d) Compressive

Description : The force that holds two particles of the different kind together is called as a) Adhesion c) Shear force b) Cohesion d) Compressive

Last Answer : a) Adhesion

The force that holds two particles of the same kind together is called as a) Adhesion c) shear force b) cohesion d) compressive

Description : The force that holds two particles of the same kind together is called as a) Adhesion c) shear force b) cohesion d) compressive

Last Answer : b) cohesion

The total pressure force on a plane area is equal to the area multiplied by the intensity of pressure at the Centroid, if (A) The area is horizontal (B) The area is vertical (C) The area is inclined (D) All of the above

Description : The total pressure force on a plane area is equal to the area multiplied by the intensity of pressure at the Centroid, if (A) The area is horizontal (B) The area is vertical (C) The area is inclined (D) All of the above

Last Answer : Answer: Option D

The horizontal component of buoyant force is (A) Negligible (B) Same as buoyant force (C) Zero (D) None of the above

Description : The horizontal component of buoyant force is (A) Negligible (B) Same as buoyant force (C) Zero (D) None of the above

Last Answer : Answer: Option C

Railway tracks are banked on curves so that : (1) the train may not fall down inwards. (2) the weight of the train may be reduced. (3) necessary centripetal force may be obtained from the horizontal component of the normal reaction due to track. (4) no frictional force may be produced between the wheels and the track.

Description : Railway tracks are banked on curves so that : (1) the train may not fall down inwards. (2) the weight of the train may be reduced. (3) necessary centripetal force may be obtained from the ... normal reaction due to track. (4) no frictional force may be produced between the wheels and the track.

Last Answer : (3) necessary centripetal force may be obtained from the horizontal component of the normal reaction due to track. Explanation: A vehicle moving at a fast speed on a straight rail/ road has ... it experiences an additional force, termed as centripetal force, acting towards the centre of the circle.

During the motion of a projectile fired from the earth surface, ______. (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Description : During the motion of a projectile fired from the earth surface, ______. (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Last Answer : (4) horizontal component of its velocity remains constant Explanation: The motion of a projectile is a two-dimensional motion-Horizontal motion and vertical motion-that take place independent ... continuously affects the vertical component, so the vertical motion is a uniformly accelerated motion.

During the motion of a projectile fired from the earth surface, _______ (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Description : During the motion of a projectile fired from the earth surface, _______ (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Last Answer : horizontal component of its velocity remains constant

Question No. 51 A low wall built out into the sea more or less perpendicular to the coast line, to resist the travel of sand and shingle along a beach, is called (A) Break water (B) Break wall (C) Groins (D) Shore wall

Description : Question No. 51 A low wall built out into the sea more or less perpendicular to the coast line, to resist the travel of sand and shingle along a beach, is called (A) Break water (B) Break wall (C) Groins (D) Shore wall

Last Answer : (C) Groins

Sea sand used in structures causes (A) Dampness (B) Efflorescence (C) Disintegration (D) All of these

Description : Sea sand used in structures causes (A) Dampness (B) Efflorescence (C) Disintegration (D) All of these

Last Answer : Answer: Option D

By increasing the rise of lock-gates, (i) The length of the lock gate will increase (ii) Transverse stress due to water pressure on the gate will increase (iii) Compressive force on the gate will increase Of these statements (A) (i) and (ii) are correct (B) (i) and (iii) are correct (C) Only (ii) is correct (D) Only (iii) is correc

Description : By increasing the rise of lock-gates, (i) The length of the lock gate will increase (ii) Transverse stress due to water pressure on the gate will increase (iii) Compressive force on the gate will increase Of ... ) (i) and (iii) are correct (C) Only (ii) is correct (D) Only (iii) is correc

Last Answer : (A) (i) and (ii) are correct

When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called (A) Shear stress (B) Compressive stress (C) Tensile stress (D) Transverse stress

Description : When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called (A) Shear stress (B) Compressive stress (C) Tensile stress (D) Transverse stress

Last Answer : (C) Tensile stress

The under mentioned type is simple strain (A) Tensile strain (B) Compressive strain (C) Shear strain (D) All the above

Description : The under mentioned type is simple strain (A) Tensile strain (B) Compressive strain (C) Shear strain (D) All the above

Last Answer : (D) All the above

Steel beam theory is used for (A) Design of simple steel beams (B) Steel beams encased in concrete (C) Doubly reinforced beams ignoring compressive stress in concrete (D) Beams if shear exceeds 4 times allowable shear stress

Description : Steel beam theory is used for (A) Design of simple steel beams (B) Steel beams encased in concrete (C) Doubly reinforced beams ignoring compressive stress in concrete (D) Beams if shear exceeds 4 times allowable shear stress

Last Answer : Answer: Option C

A fluid in equilibrium can't sustain (A) Tensile stress (B) Compressive stress (C) Shear stress (D) Bending stress

Description : A fluid in equilibrium can't sustain (A) Tensile stress (B) Compressive stress (C) Shear stress (D) Bending stress

Last Answer : Answer: Option C