By increasing the rise of lock-gates, (i) The length of the lock gate will increase (ii) Transverse stress due to water pressure on the gate will increase (iii) Compressive force on the gate will increase Of these statements (A) (i) and (ii) are correct (B) (i) and (iii) are correct (C) Only (ii) is correct (D) Only (iii) is correc

By increasing the rise of lock-gates,
 (i) The length of the lock gate will increase
 (ii) Transverse stress due to water pressure on the gate will increase
 (iii) Compressive force on the gate will increase
 Of these statements
(A) (i) and (ii) are correct
(B) (i) and (iii) are correct
(C) Only (ii) is correct
(D) Only (iii) is correc
by

1 Answer

Answer :

(A) (i) and (ii) are correct
by

Related questions

Transverse fillet welds are under (i) Shear stress (ii) Compressive stress (iii) Tensile stress

Description : Transverse fillet welds are under (i) Shear stress (ii) Compressive stress (iii) Tensile stress

Last Answer : (iii) Tensile stress

Consider the following statements: Web crippling due to excessive bearing stress can be avoided by 1. Increasing the web thickness 2. providing suitable stiffeners 3. Increasing the length of the bearing plates Which of these statements are correct? (a) 1 and 2 only (b) 2 and 3 only (c) 1 and 3 only (d) 1, 2 and 3

Description : Consider the following statements: Web crippling due to excessive bearing stress can be avoided by 1. Increasing the web thickness 2. providing suitable stiffeners 3. Increasing the length of the bearing plates Which of these statements are ... only (b) 2 and 3 only (c) 1 and 3 only (d) 1, 2 and 3

Last Answer : (d) 1, 2 and 3

When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called (A) Shear stress (B) Compressive stress (C) Tensile stress (D) Transverse stress

Description : When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called (A) Shear stress (B) Compressive stress (C) Tensile stress (D) Transverse stress

Last Answer : (C) Tensile stress

Transverse fillet welds are under (i) Bending and shear stresses (ii)Compressive and torsion shear stresses (iii)Tensile and compressive stresses (iv)None

Description : Transverse fillet welds are under (i) Bending and shear stresses (ii)Compressive and torsion shear stresses (iii)Tensile and compressive stresses (iv)None

Last Answer : (iv)None

Study the following statements. (i) Levees are constructed parallel to river flow (ii) Spurs are constructed parallel to river flow (iii) Levees are constructed transverse to river flow (iv) Spurs are constructed transverse to river flow The correct answer is (A) (i) and (ii) (B) (i) and (iv) (C) (ii) and (iii) (D) (iii) and (iv)

Description : Study the following statements. (i) Levees are constructed parallel to river flow (ii) Spurs are constructed parallel to river flow (iii) Levees are constructed transverse to river flow (iv) Spurs are constructed transverse to ... (B) (i) and (iv) (C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : Answer: Option B

Consider the following statements: 1. Consolidation time increase with increasing compressibility 2. Consolidation time decreases with increasing permeability. 3. Consolidation time is dependent on the magnitude of stress increase. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Consolidation time increase with increasing compressibility 2. Consolidation time decreases with increasing permeability. 3. Consolidation time is dependent on the magnitude of stress increase. Which of these ... (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

When a body is subjected to transverse vibrations, the stress induced in a body will be A Shear stress B Bending stress C Tensile stress D Compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be A Shear stress B Bending stress C Tensile stress D Compressive stress

Last Answer : B Bending stress

When a body is subjected to transverse vibrations, the stress induced in a body B will be (A) Shear stress (B) Bending stress (C) Tensile stress (D)Compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body B will be (A) Shear stress (B) Bending stress (C) Tensile stress (D)Compressive stress

Last Answer : (B) Bending stress

When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Last Answer : b) bending stress

When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Last Answer : b) bending stress

When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) tensile stress c) compressive stress d) none of the mentioned

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) tensile stress c) compressive stress d) none of the mentioned

Last Answer : b) tensile stress

A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal. a) PSinθ(Sinθ+Cosθ)/hl b) P(Sinθ+Cosθ)/hl c) Pcosθ(Sinθ+Cosθ)/hl d) None of the listed

Description : A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal. a) PSinθ(Sinθ+Cosθ)/hl b) P(Sinθ+Cosθ)/hl c) Pcosθ(Sinθ+Cosθ)/hl d) None of the listed

Last Answer : a) PSinθ(Sinθ+Cosθ)/hl

A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal. a) PSinθ(Sinθ+Cosθ)/hl b) P(Sinθ+Cosθ)/hl c) Pcosθ(Sinθ+Cosθ)/hl d) None of the listed

Description : A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal. a) PSinθ(Sinθ+Cosθ)/hl b) P(Sinθ+Cosθ)/hl c) Pcosθ(Sinθ+Cosθ)/hl d) None of the listed

Last Answer : a) PSinθ(Sinθ+Cosθ)/hl

Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)

Description : Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)

Last Answer : Answer: Option D

Struts are load carrying members of a frame structure which are subjected to (A) Axial tension loads (B) Axial compressive loads (C) Torsional loads (D) Transverse loads

Description : Struts are load carrying members of a frame structure which are subjected to  (A) Axial tension loads  (B) Axial compressive loads  (C) Torsional loads  (D) Transverse loads 

Last Answer : (B) Axial compressive loads 

Ties are load carrying members of a frame, which are subjected to (A) Transverse loads (B) Axial tension loads (C) Axial compressive loads (D) Torsional loads

Description : Ties are load carrying members of a frame, which are subjected to  (A) Transverse loads  (B) Axial tension loads  (C) Axial compressive loads  (D) Torsional loads 

Last Answer : (B) Axial tension loads 

Parallel fillet welds are under (i) Shear stress (ii)Compressive stress (iii)Tensile stress (iv)None

Description : Parallel fillet welds are under (i) Shear stress (ii)Compressive stress (iii)Tensile stress (iv)None

Last Answer : (i) Shear stress

Butt welds are under (i) Shear stress (ii) Compressive stress (iii) Tensile stress

Description : Butt welds are under (i) Shear stress (ii) Compressive stress (iii) Tensile stress

Last Answer : (iii) Tensile stress

Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs (c) Temporary adjustments of the dumpy level are to be performed at every set up (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Description : Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is ... (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Last Answer : (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs

Examine the following statements: (i) Factor of safety for steel should be based on its yield stress, (ii) Factor of safety for steel should be based on its ultimate stress, (iii) Factor of safety for concrete should be based on its yield stress, (iv) Factor of safety for concrete should be based on its ultimate stress. The correct statements are (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv

Description : Examine the following statements: (i) Factor of safety for steel should be based on its yield stress, (ii) Factor of safety for steel should be based on its ultimate stress, (iii) Factor of safety for concrete should be based on ... (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv

Last Answer : Answer: Option B

If is the sectional area of a pre-stressed rectangular beam provided with a tendon pre-stressed by a force through its centroidal longitudinal axis, the compressive stress in concrete, is (A) P/A (B) A/P (C) P/2A (D) 2A/P

Description : If is the sectional area of a pre-stressed rectangular beam provided with a tendon pre-stressed by a force through its centroidal longitudinal axis, the compressive stress in concrete, is (A) P/A (B) A/P (C) P/2A (D) 2A/P

Last Answer : Answer: Option A

When the steel bars are embedded in concrete. The concrete after setting, adheres to the surface of the bars and thus resist any force that tends to pull or push this road. The intensity of this adhesive force is called. (a) Bond stress (b) Shear stress (c) Compressive stress (d) All of these

Description : When the steel bars are embedded in concrete. The concrete after setting, adheres to the surface of the bars and thus resist any force that tends to pull or push this road. The intensity of this adhesive force is called. (a) Bond stress (b) Shear stress (c) Compressive stress (d) All of these

Last Answer : (a) Bond stress

Rise of water table above the ground surface causes (A) Equal increase in pore water pressure and total stress (B) Equal decrease in pore water pressure and total stress (C) Increase in pore water pressure but decrease in total stress (D) Decrease in pore water pressure but increase in total stress

Description : Rise of water table above the ground surface causes (A) Equal increase in pore water pressure and total stress (B) Equal decrease in pore water pressure and total stress (C) Increase in ... pressure but decrease in total stress (D) Decrease in pore water pressure but increase in total stress

Last Answer : Answer: Option A

While designing screw threads, adequate length of engaged threads between the screw and nut is provided so as to prevent failure of threads due to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Description : While designing screw threads, adequate length of engaged threads between the screw and nut is provided so as to prevent failure of threads due to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (A) Direct shear stress

Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's law is equally applicable to concrete as well as to steel (C) Variation of stress in reinforcement due to changes in external loading is negligible (D) All the above

Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above

Last Answer : Answer: Option D

The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

In a spherical dome the hoop stress due to a concentrated load at crown is (A) Compressive everywhere (B) Tensile everywhere (C) Partly compressive and partly tensile (D) Zero

Description : In a spherical dome the hoop stress due to a concentrated load at crown is (A) Compressive everywhere (B) Tensile everywhere (C) Partly compressive and partly tensile (D) Zero

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The moment of inertia is calculated about the axis about which bending takes place (B) If tensile stress is less than axial stress, the section experiences compressive stress (C) If tensile stress is equal to axial stress, the section experiences compressive stress (D) All the above

Description : Pick up the correct statement from the following:  (A) The moment of inertia is calculated about the axis about which bending takes place  (B) If tensile stress is less than axial ... tensile stress is equal to axial stress, the section experiences compressive stress  (D) All the above 

Last Answer : (D) All the above 

Shrinkage of concrete depends upon (i) Humidity of atmosphere (ii) Passage of time (iii) Stress The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) Only (iii) (D) All (i), (ii) an

Description : Shrinkage of concrete depends upon (i) Humidity of atmosphere (ii) Passage of time (iii) Stress The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) Only (iii) (D) All (i), (ii) an

Last Answer : Answer: Option A

On the sea shore structures, the water wave impact causes (A) Direct compressive force due to its horizontal component (B) Shear force due to deflected vertical force (C) Compressive force due to collapse of the wave (D) All of the above

Description : On the sea shore structures, the water wave impact causes (A) Direct compressive force due to its horizontal component (B) Shear force due to deflected vertical force (C) Compressive force due to collapse of the wave (D) All of the above

Last Answer : (D) All of the above

he transverse fillet welded joints are designed for (a) tensile strength (b) compressive strength (c) bending strength (d) shear strength

Description : he transverse fillet welded joints are designed for (a) tensile strength (b) compressive strength (c) bending strength (d) shear strength

Last Answer : (a) tensile strength

Increasing gate length in a sawtooth generator does what to linearity?

Description : Increasing gate length in a sawtooth generator does what to linearity?

Last Answer : Decreases linearity.

Maximum shear stress in transverse fillet weld of leg h and length l is a) P/hl b) 1.21P/hl c) P/1.21hl d) None of the listed

Description : Maximum shear stress in transverse fillet weld of leg h and length l is a) P/hl b) 1.21P/hl c) P/1.21hl d) None of the listed

Last Answer : b) 1.21P/hl

Maximum shear stress in transverse fillet weld of leg h and length l is a) P/hl b) 1.21P/hl c) P/1.21hl d) None of the listed

Description : Maximum shear stress in transverse fillet weld of leg h and length l is a) P/hl b) 1.21P/hl c) P/1.21hl d) None of the listed

Last Answer : b) 1.21P/hl

If the water table rises upto ground surface, then the (A) Effective stress is reduced due to decrease in total stress only but pore water pressure does not change (B) Effective stress is reduced due to increase in pore water pressure only but total stress does not change (C) Total stress is reduced due to increase in pore water pressure only but effective stress does not change (D) Total stress is increased due to decrease in pore water pressure but effective stress does not change

Description : If the water table rises upto ground surface, then the (A) Effective stress is reduced due to decrease in total stress only but pore water pressure does not change (B) Effective stress is ... D) Total stress is increased due to decrease in pore water pressure but effective stress does not change

Last Answer : (B) Effective stress is reduced due to increase in pore water pressure only but total stress does not change

Which one of the following statements is correct ? (a) Dynamic viscosity is the property of a fluid which is not in motion (b) Surface energy is a fluid property giving rise to the phenomenon of capillarity in water (c) Cavitation results from the action of very high pressure (d) Real fluids have lower viscosity than ideal fluids

Description : Which one of the following statements is correct ? (a) Dynamic viscosity is the property of a fluid which is not in motion (b) Surface energy is a fluid property giving rise to the phenomenon ... results from the action of very high pressure (d) Real fluids have lower viscosity than ideal fluids

Last Answer : (d) Real fluids have lower viscosity than ideal fluids

Angiotensin II causes rise in blood pressure by: A. Direct vasoconstriction B. Releasing adrenaline from adrenal medulla C. Increasing central sympathetic tone D. All of the above

Description : Angiotensin II causes rise in blood pressure by: A. Direct vasoconstriction B. Releasing adrenaline from adrenal medulla C. Increasing central sympathetic tone D. All of the above

Last Answer : D. All of the above

Which of the following is/are true if a firm has a required rate of return equal to the ROE? I. The amount of earnings retained by the firm does not affect market price or the P/E. II. The firm can increase market price and P/E by increasing the growth rate. III. The P/E ratio is inversely proportional to the ROE of the firm. A. Only (I) above B. Both (I) and (II) above C. Both (I) and (III) above D. Both (II) and (III) above E. All (I), (II) and (III) above

Description : Which of the following is/are true if a firm has a required rate of return equal to the ROE? I. The amount of earnings retained by the firm does not affect market price or the P/E. II. The firm can increase market ... (III) above D. Both (II) and (III) above E. All (I), (II) and (III) above

Last Answer : E. All (I), (II) and (III) above

Pick up the correct statement from the following: (A) The rise of the ground surface due to frost action is called frost heave (B) The freezing of water is accompanied by a volume increase of 9% (C) Below freezing point, higher soil suction develops (D) All the above

Description : Pick up the correct statement from the following: (A) The rise of the ground surface due to frost action is called frost heave (B) The freezing of water is accompanied by a volume increase of 9% (C) Below freezing point, higher soil suction develops (D) All the above

Last Answer : (D) All the above

Which of the following statement/s are ALWAYS FALSE ? (i) The sun will not rise in the East some day. (ii) A wooden table is not a table. (iii) Delhi city will be drowned under water. (iv) Cars run on water as fuel. Choose the correct answer from the code given below : Code : (A) (i), (iii) and (iv) (B) Only (iii) (C) (i), (ii) and (iii) (D) (ii) alone

Description : Which of the following statement/s are ALWAYS FALSE ? (i) The sun will not rise in the East some day. (ii) A wooden table is not a table. (iii) Delhi city will be drowned under water. (iv) Cars run on water as fuel. ... i), (iii) and (iv) (B) Only (iii) (C) (i), (ii) and (iii) (D) (ii) alone

Last Answer : (D) (ii) alone

Presence of tail water in a gravity dam (i) Increases the principal stress (ii) Decreases the principal stress (iii) Increases the shear stress (iv) Decreases the shear stress The correct answer isA) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : Presence of tail water in a gravity dam (i) Increases the principal stress (ii) Decreases the principal stress (iii) Increases the shear stress (iv) Decreases the shear stress The correct answer is A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Answer: Option D

When the helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (D) Torsional shear stress

When the helical extension spring is subjected to axial tensile force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical extension spring is subjected to axial tensile force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (D) Torsional shear stress

In the slope deflection equations, the deformations are considered to be caused by (i) Bending moment (ii) Shear force (iii) Axial force The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Description : In the slope deflection equations, the deformations are considered to be caused by (i) Bending moment (ii) Shear force (iii) Axial force The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Last Answer : (A) Only (i)

A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and height of the key being 14mm and 80mm respectively. Find the compressive stress induced in the key. a) 70.1 N/mm2 b) 51.6N/mm2 c) 45.5N/mm2 d) None of the listed

Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and height of the key being 14mm and 80mm respectively. Find the compressive stress induced in the key. a) 70.1 N/mm2 b) 51.6N/mm2 c) 45.5N/mm2 d) None of the listed

Last Answer : b) 51.6N/mm2

When stress changes the length of a body it is called a) Tensile stress b) Shear stress c) Compressive stress d) Yield stress

Description : When stress changes the length of a body it is called a) Tensile stress b) Shear stress c) Compressive stress d) Yield stress

Last Answer : a) Tensile stress

For the reactions, (i) `H_(2)(g)+Cl_(2)(g)rarr 2HCl(g)+ xKJ` (ii) `H_(2)(g)+Cl_(2)(g)rarr 2HCl(l)+ yKJ` Which one of the following statement is correc

Description : For the reactions, (i) `H_(2)(g)+Cl_(2)(g)rarr 2HCl(g)+ xKJ` (ii) `H_(2)(g)+Cl_(2)(g)rarr 2HCl(l)+ yKJ` Which one of the following statement is correc

Last Answer : For the reactions, (i) `H_(2)(g)+Cl_(2)(g)rarr 2HCl(g)+ xKJ` (ii) `H_(2)(g)+Cl_(2)(g)rarr 2HCl(l)+ ... x gt y B. x lt y C. x = y D. More data required

Which gates can draw a public gate ?

Description : Which gates can draw a public gate ?

Last Answer : NAND and NOR gates are called universal gates , which can be created by combining three basic gates in AND, OR and NOT . These can be expressed using the following equations - NAND = AND + NOT NOR = OR + NOT i.e. NAND by AND and NOT gates and NOR gate by OR and NOT gates .