Suspended colloidal particles in the water can be removed
by the process of?

1 Answer

Answer :

Coagulation

Related questions

Description : Suspended colloidal particles in water can be removed by the process of

Last Answer : Coagulation

Description : Very fine suspended and colloidal impurities are removed from water by a process called (A) Sedimentation (B) Coagulation (C) Disinfection (D) Softening

Last Answer : (B) Coagulation

Description : In domestic sewage, suspended solids, colloidal and dissolved materials constitute

Last Answer : In domestic sewage, suspended solids, colloidal and dissolved materials constitute A. 0.1 B. 0.056 C. 0.027 D. 0.001

Description : Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream? (A) Sedimentation tank (B) Circular clarifier (C) Mechanical flocculation (D) Chemical coagulation

Last Answer : (D) Chemical coagulation

Description : State which statement is true for Suspended process? i) The process is not immediately available for execution. ii) The process may be removed from suspended state automatically without removal order. A) i only B) ii only C) i and ii only D) None

Last Answer : A) i only

Description : Assertion Colloidal sols scatter light while true solutions do not. Reason The particles in the colloidal sol move slower than that of the true solutions. -Chemistry

Last Answer : Both assertion and reason are true but the reason is not the correct explanation of assertion. The size of colloidal particles is large enough to scatter light while particles of a true solution are too small to scatter light.

Description : Explain why particles of a colloidal solution do not settle down when left undisturbed, while in the case of a suspension they do? -Maths 9th

Last Answer : The colloidal particles are smaller and not heavy. They always remain in a state of zig-zag motion, called Brownian movement, which counters the force of gravity acting on colloidal particles and ... particles of suspension are larger, heavy and have less movement, thus settle down due to gravity.

Description : Explain why particles of a colloidal solution do not settle down when left undisturbed, while in the case of a suspension they do? -Maths 9th

Last Answer : The colloidal particles are smaller and not heavy. They always remain in a state of zig-zag motion, called Brownian movement, which counters the force of gravity acting on colloidal particles and ... particles of suspension are larger, heavy and have less movement, thus settle down due to gravity.

Description : Who called larger colloidal particles of primitives sea as coacervates :

Last Answer : Who called larger colloidal particles of primitives sea as coacervates : A. Fox B. Oparin C. Empedcles D. Haldane

Description : Aerosol is a system of colloidal particles having a size of

Last Answer : Aerosol is a system of colloidal particles having a size of A. `5mum` B. `1-2 mum` C. less than `100 mum` D. more than `10 mum`

Description : Assertion :- Filtration of colloidal particles is not possible by filter paper. Reason :- Size of colloidal particle is less than filter paper pores.

Last Answer : Assertion :- Filtration of colloidal particles is not possible by filter paper. Reason :- Size of ... D. If both Assertion & Reason are False.

Description : Choose the correct reason(s) for the stability of the lyophobic colloidal particles.

Last Answer : Choose the correct reason(s) for the stability of the lyophobic colloidal particles. A. ... layer of opposite charges around the colloidal particles.

Description : Which of the following represents macromolecular colloidal particles?

Last Answer : Which of the following represents macromolecular colloidal particles? A. Solution of gold B. Cellulose C. Soaps D. Synthetic detergents

Description : size of colloidal particles may range from:

Last Answer : size of colloidal particles may range from: A. 1 to 1000 nm B. 10 to 100 pm C. 1 to 100 `mum` D. 1 to 10 mm

Description : The size of colloidal particles lies between :

Last Answer : The size of colloidal particles lies between : a. 10-10m and 10-9m b. 10-9m and 10-6m c. 10-6m and 10-4m d. 10-5m and 10-2m

Description : Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Last Answer : (C) Colloidal

Description : A sol is prepared by addition to excess AgNO3 solution in KI solution. What charge is likely to develop on the colloidal particles ?

Last Answer : Ans. Positive. 

Description : If an electric field is applied to a colloidal sol, the dispersed phase particles are found to move towards the electrode of opposite charge. If however, the dispersed phase is made stationary, the ... move in the opposite direction. What is the term used for such movement of dispersion medium ?

Last Answer : Ans. Electro osmosis. 

Description : Proteins can exist in the cell in the forms of a. Colloidal particles b. crystalloid c. Both d. none

Last Answer : Colloidal particles

Description : What is the separation of colloidal particles from those of molecular dimensions called?

Last Answer : Dialysis

Description : The colloidal particles of organic materials formed in the primitive oceans are called a. Coacervates b. Protoplasm c. Cytoplasm d. Nucleic acid

Last Answer : a. Coacervates

Description : Which of the following refers to the scattering of light by colloidal particles? w) Rutherford effect x) Tyndall effect (pron: tin-dahl) y) Thompson effect z) none of these

Last Answer : ANSWER: X -- TYNDALL EFFECT

Description : Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by (A) Biological oxygen pond (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate) (C) Lagoons (D) Filtration

Last Answer : (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate)

Description : To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. stowed upright on its shaft C. supported by two 'V' notched wood blocks D. returned to the frame as soon as the bearings are removed

Last Answer : Answer: C

Description : To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. wrapped in several layers of heavy ... flat wood blocks on the workbench D. returned to the frame as soon as the bearings are removed

Last Answer : Answer: B

Description : The following statements relate to the Board of Accountancy. Which statement is correct? a. The Board consists of a Chairman and six members. b. The chairman and members are appointed by ... Commission may remove from the Board any member whose certificate to practice has been removed or suspended

Last Answer : The Board consists of a Chairman and six members.

Description : Which of the following statement(s) is/are correct about a Judge of the Supreme Court of India? 1. A Judge of the Supreme Court is appointed by the President of India. 2. He holds office during the pleasure of the President. 3. He ... A) 1, 2 and 3 (B) 1, 3 and 4 (C) 1 and 3 (D) 1 and 4

Last Answer : (D) 1 and 4

Description : Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Last Answer : (B) In sedimentation tanks equipped with mechanical scrapper

Description : To remove very fine suspended particles from water, the method adopted is  (A) Screening  (B) Sedimentation  (C) Boiling  (D) Filtration

Last Answer : To remove very fine suspended particles from water, the method adopted is  (A) Screening  (B) Sedimentation  (C) Boiling  (D) Filtration

Description : Consider the following statements. The role of the gravel bed in a rapid sand filter is : 1. To filter out large suspended matter 2. To support the sand bed above it 3. To prevent the escape of sand particles 4. To uniformly ... and 5 b) 2, 3 and 4 only c) 3, 4 and 5 only d) 1, 2 and 3 only

Last Answer : b) 2, 3 and 4 only

Description : ‘Aerosol’ is - (1) Suspended solid particles in air (2) Pollutant gas, present in air (3) (8) Microbes, present in air (4) Green house gas present in air

Last Answer : (1) Suspended solid particles in air

Description : Fine organic or inorganic particles suspended in air is called --------? A. particulate pollutant B. gaseous pollutant C. aerosol (Answer) D. none of these

Last Answer : C. aerosol (Answer)

Description : The random motion of particles suspended in a fluid is called: w) Boson Condensation x) Fermi Motion y) Brownian Motion z) Pauli Motion

Last Answer : ANSWER: Y -- BROWNIAN MOTION

Description : ‘Aerosol’ is (1) Suspended solid particles in air (2) Pollutant gas, present in air (3) Microbes, present in air (4) Green house gas present in air

Last Answer : Suspended solid particles in air

Description : When heat is removed, particles in a solid, liquid, or gas do what?

Last Answer : State Changes If you give the particles energy; or take energy away from them; then you can change their state. If you heat up a solid - you give it some energy. This causes the particles to move more and ... into a liquid, or melt. If the liquid is heated then it may evaporate and turn into a gas.

Description : Separation of solid suspended in liquid into a supernatant clear liquid and a denser slurry employs a process termed as the (A) Coagulation (B) Flocculation (C) Sedimentation (D) Clarification

Last Answer : (C) Sedimentation

Description : During sewage treatment, effluent from which one of the following treatment units has minimum wt/vol amount of suspended solids? (a) Detritus channel (b) Primary sedimentation tank (c) Secondary sedimentation tank (d) Activated sludge process aeration tank

Last Answer : (d) Activated sludge process aeration tank

Description : Soaps essentially form a colloidal solution in water and remove the greasy matters by :

Last Answer : Soaps essentially form a colloidal solution in water and remove the greasy matters by : A. adsorption B. emulsification C. coagulation D. absorption

Description : (4) Water drops in a dispersion medium of air Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... or gas. Cloud is a colloidal dispersion of Water drops in a dispersion medium of air.

Last Answer : Conduction band electrons have more mobility than holes because they – (1) are lighter (2) experience collision less frequently (3) have negative charge (4) need less energy to move them

Description : (2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Last Answer : The presence of ozone in the stratosphere is responsible for – (1) increasing the average global temperature in recent years (2) higher rate of photosynthesis (3) checking the penetration of ultra-violet rays to the earth (4) supplying oxygen for people travelling in jets

Description : (2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Last Answer : The presence of ozone in the stratosphere is responsible for – (1) increasing the average global temperature in recent years (2) higher rate of photosynthesis (3) checking the penetration of ultra-violet rays to the earth (4) supplying oxygen for people travelling in jets

Description : Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b

Last Answer : (C) Both ‘a’ & ‘b

Description : What type of colloidal sols are formed in the following ? (i) Sulphur vapours are passed through cold water. (ii) White of an egg is mixed with water. (iii) Concentration of soap solution is increased.

Last Answer : (i) Multimolecular colloid (ii) Macromolecular colloid (iii) Associated colloid.

Description : Hydrazine is used in water treatment for the removal of (A) Colloidal impurities (B) Dissolved oxygen (C) Turbidity (D) Chlorinous taste

Last Answer : (B) Dissolved oxygen

Description : Choose the correct statement about osmotic diuretics: A. They are large molecular weight substances which form colloidal solution B. Their primary site of action is collecting ducts in the ... C. They increase water excretion without increasing salt excretion D. They can lower intraocular pressure

Last Answer : D. They can lower intraocular pressure

Description : A substance which readily forms colloidal solution in contact with water is called (1) Extrinsic colloid (2) Associated colloid (3) Hydrophobic colloid (4) Hydrophilic colloid 

Last Answer : Hydrophilic colloid

Description : Cloud is a colloidal dispersion of (1) Air in a dispersion medium of water (2) Fog in a dispersion medium of water (3) Mist in a dispersion medium of air (4) Water drops in a dispersion medium of air

Last Answer : Water drops in a dispersion medium of air

Description : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Last Answer : Fat is dispersed in water

Description : Colloidal gold: do you use it , what do you use it for and does it work?

Last Answer : This took me four seconds.

Description : Which colloidal solution is used in photography? -Do You Know?

Last Answer : Photographic emulsion is a light-sensitive colloid used in film-based photography. Most commonly, in silver-gelatin photography, it consists of silver halide crystals dispersed in gelatin.