Uniform flow occurs when (A) The flow is steady (B) The flow is streamline (C) Size and shape of the cross section in a particular length remain constant (D) Size and cross section change uniformly along length

Uniform flow occurs when
(A) The flow is steady
(B) The flow is streamline
(C) Size and shape of the cross section in a particular length remain constant
(D) Size and cross section change uniformly along length
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Consider the following statements : 1. There is no flow across a streamline 2. Streamline spacing varies directly with velocity at the section 3. Streamlines do not cross 4. In steady flow, streamline pattern does not change with time Which of these statements in respect of stream flow pattern are correct? (a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Description : Consider the following statements : 1. There is no flow across a streamline 2. Streamline spacing varies directly with velocity at the section 3. Streamlines do not cross 4. In steady flow, streamline pattern does not change with ... 4 (b) 1 and 2 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Last Answer : (c) 1, 3 and 4 only

A flow in which each liquid particle has a definite path, and the paths of individual particles do not cross each other, is called (A) Steady flow (B) Uniform flow (C) Streamline flow (D) Turbulent flow

Description : A flow in which each liquid particle has a definite path, and the paths of individual particles do not cross each other, is called (A) Steady flow (B) Uniform flow (C) Streamline flow (D) Turbulent flow

Last Answer : Answer: Option C

According to Bernoulli's equation for steady ideal fluid flow (A) Principle of conservation of mass holds (B) Velocity and pressure are inversely proportional (C) Total energy is constant throughout (D) The energy is constant along a streamline but may vary across streamlines

Description : According to Bernoulli's equation for steady ideal fluid flow (A) Principle of conservation of mass holds (B) Velocity and pressure are inversely proportional (C) Total energy is constant throughout (D) The energy is constant along a streamline but may vary across streamlines

Last Answer : Answer: Option D

The flow through an open system is _________ if all properties at each point within the system remain constant with respect to time.  a. streamline flow  b. steady flow  c. constant flow  d. algebraic flow

Description : The flow through an open system is _________ if all properties at each point within the system remain constant with respect to time.  a. streamline flow  b. steady flow  c. constant flow  d. algebraic flow

Last Answer : steady flow

Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option B

In deriving Bernoulli's equation, fluid is assumed to be (A) Incompressible, frictionless, steady, along a streamline (B) Uniform, steady, incompressible, along a streamline (C) Steady, density being pressure dependent, frictionless (D) None of these

Description : In deriving Bernoulli's equation, fluid is assumed to be (A) Incompressible, frictionless, steady, along a streamline (B) Uniform, steady, incompressible, along a streamline (C) Steady, density being pressure dependent, frictionless (D) None of these

Last Answer : (A) Incompressible, frictionless, steady, along a streamline

Uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid ) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each pleasure

Description : Uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each pleasure

Last Answer : Answer: Option C

Non uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) Velocity, depth, pressure, etc. change from point to point in the fluid flow. (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : Non uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option C

A cross a metallic conductor of non-uniform cross-section, a constant potential difference is applied. The quantity which remain (s) constant along th

Description : A cross a metallic conductor of non-uniform cross-section, a constant potential difference is applied. The quantity which remain (s) constant along th

Last Answer : A cross a metallic conductor of non-uniform cross-section, a constant potential difference is applied ... current C. drift velocity D. electric field

The flow in which each liquid particle has a definite path and their paths do not cross each other is called (A) One dimensional flow (B) Streamline flow (C) Steady flow (D) Turbulent flow

Description : The flow in which each liquid particle has a definite path and their paths do not cross each other is called (A) One dimensional flow (B) Streamline flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option B

The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Description : The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Last Answer : Answer: Option D

A flow in which the quantity of liquid flowing per second is not constant, is called (A) Streamline flow (B) Turbulent flow (C) Steady flow (D) Unsteady flow

Description : A flow in which the quantity of liquid flowing per second is not constant, is called (A) Streamline flow (B) Turbulent flow (C) Steady flow (D) Unsteady flow

Last Answer : Answer: Option D

A flow in which the quantity of liquid flowing per second is constant, is called __________ flow. (A) Steady (B) Streamline (C) Turbulent (D) Unsteady

Description : A flow in which the quantity of liquid flowing per second is constant, is called __________ flow. (A) Steady (B) Streamline (C) Turbulent (D) Unsteady

Last Answer : Answer: Option A

A streamline is defined as the line (A) Parallel to central axis flow (B) Parallel to outer surface of pipe (C) Of equal velocity in a flow (D) Along which the pressure drop is uniform

Description : A streamline is defined as the line (A) Parallel to central axis flow (B) Parallel to outer surface of pipe (C) Of equal velocity in a flow (D) Along which the pressure drop is uniform

Last Answer : Answer: Option C

If in a flow field, between any two points, then the flow must be (A) Steady, incompressible, irrotational (B) Steady, compressible, irrotational (C) Steady, compressible and along a streamline

Description : If in a flow field, between any two points, then the flow must be (A) Steady, incompressible, irrotational (B) Steady, compressible, irrotational (C) Steady, compressible and along a streamline

Last Answer : (A) Steady, incompressible, irrotational

When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is uniform, then the quantity that remains constant along th

Description : When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is uniform, then the quantity that remains constant along th

Last Answer : When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is ... . electric field C. electric potential D. current

When the flow parameters at any given instant remain same at every point, then flow is said to be (A) Quasi-static (B) Steady state (C) Laminar (D) Uniform

Description : When the flow parameters at any given instant remain same at every point, then flow is said to be (A) Quasi-static (B) Steady state (C) Laminar (D) Uniform

Last Answer : Answer: Option D

A streamline is (A) The line connecting the mid-points of flow cross-sections (B) Defined for uniform flow only (C) Drawn normal to the velocity vector at every point (D) Always the path of a particle

Description : A streamline is (A) The line connecting the mid-points of flow cross-sections (B) Defined for uniform flow only (C) Drawn normal to the velocity vector at every point (D) Always the path of a particle

Last Answer : (C) Drawn normal to the velocity vector at every point

A large Reynold number is indication of (A) Smooth and streamline flow (B) Laminar flow (C) Steady flow (D) Highly turbulent flow

Description : A large Reynold number is indication of (A) Smooth and streamline flow (B) Laminar flow (C) Steady flow (D) Highly turbulent flow

Last Answer : Answer: Option D

The equation of continuity holds good when the flow (A) Is steady (B) Is one dimensional (C) Velocity is uniform at all the cross sections (D) All of the above

Description : The equation of continuity holds good when the flow (A) Is steady (B) Is one dimensional (C) Velocity is uniform at all the cross sections (D) All of the above

Last Answer : Answer: Option D

True one-dimensional flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : True one-dimensional flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option A

A flow through a long pipe at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Description : A flow through a long pipe at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Last Answer : Answer: Option A

A flow through an expanding tube at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Description : A flow through an expanding tube at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Last Answer : Answer: Option B

In frictional fluid flow, the quantity, (P/ρ) + (V 2 /2gc) + gz/gc) is (A) Constant along a streamline (B) Not constant along a streamline (C) Increased in the direction of flow (D) None of these

Description : In frictional fluid flow, the quantity, (P/ρ) + (V 2 /2gc) + gz/gc) is (A) Constant along a streamline (B) Not constant along a streamline (C) Increased in the direction of flow (D) None of these

Last Answer : (B) Not constant along a streamline

The continuity equation in ideal fluid flow states that (A) Net rate of inflow into any small volume must be zero (B) Energy is not constant along a streamline (C) Energy is constant along a streamline (D) There exists a velocity potential

Description : The continuity equation in ideal fluid flow states that (A) Net rate of inflow into any small volume must be zero (B) Energy is not constant along a streamline (C) Energy is constant along a streamline (D) There exists a velocity potential

Last Answer : (A) Net rate of inflow into any small volume must be zero

The following assumption is not true in the theory of pure torsion: (A) The twist along the shaft is uniform (B) The shaft is of uniform circular section throughout (C) Cross-section of the shaft, which is plane before twist remains plane after twist (D) All radii get twisted due to torsion

Description : The following assumption is not true in the theory of pure torsion:  (A) The twist along the shaft is uniform  (B) The shaft is of uniform circular section throughout  (C) Cross- ... , which is plane before twist remains plane after twist  (D) All radii get twisted due to torsion 

Last Answer : (D) All radii get twisted due to torsion 

If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by (A) Mid-section formula (B) Trapezoidal formula (C) Prismoidal formula (D) All the above

Description : If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by (A) Mid-section formula (B) Trapezoidal formula (C) Prismoidal formula (D) All the above

Last Answer : (D) All the above

Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Description : Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Last Answer : (C) Steadily decreasing flow through a reducing section

The flow in which conditions do not change with time at any point, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Description : The flow in which conditions do not change with time at any point, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option C

The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Description : The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Last Answer : Answer: Option D

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Last Answer : (B) 12.88

A uniform girder simply supported at its ends is subjected to a uniformly distributed load over its entire length and is propped at the centre so as to neutralise the deflection. The net B.M. at the centre will be (A) WL (B) WL/8 (C) WL/24 (D) WL/32

Description : A uniform girder simply supported at its ends is subjected to a uniformly distributed load over its entire length and is propped at the centre so as to neutralise the deflection. The net B.M. at the centre will be (A) WL (B) WL/8 (C) WL/24 (D) WL/32

Last Answer : (D) WL/32

Steady flow occurs, when the (A) Conditions change steadily with time (B) Conditions are the same at the adjacent points at any instant (C) Conditions do not change with time at any point (D) Rate of the velocity change is constant

Description : Steady flow occurs, when the (A) Conditions change steadily with time (B) Conditions are the same at the adjacent points at any instant (C) Conditions do not change with time at any point (D) Rate of the velocity change is constant

Last Answer : (C) Conditions do not change with time at any point

Steady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at constant rate (D) None of these

Description : Steady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at constant rate (D) None of these

Last Answer : (A) Long pipe at constant rate

The flow of a liquid through tapering pipe at a constant rate is an example of __________ flow. (A) Steady uniform (B) Steady non uniform (C) Unsteady uniform

Description : The flow of a liquid through tapering pipe at a constant rate is an example of __________ flow. (A) Steady uniform (B) Steady non uniform (C) Unsteady uniform

Last Answer : (B) Steady non uniform

Steady non-uniform flow is exemplified by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Description : Steady non-uniform flow is exemplified by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Last Answer : (D) Expanding tube at constant rate

Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, kinetic energy and pressure energy. (C) The length of divergent portion in a Venturimeter is equal to the convergent portion. (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Description : Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, ... (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Last Answer : Answer: Option C

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

When a uniformly distributed load, longer than the span of the girder, moves from left to right, then the maximum bending moment at mid section of span occurs when the uniformly distributed load occupies (A) Less than the left half span (B) Whole of left half span (C) More than the left half span (D) Whole span

Description : When a uniformly distributed load, longer than the span of the girder, moves from left to right, then the maximum bending moment at mid section of span occurs when the uniformly distributed load occupies (A) Less ... (B) Whole of left half span (C) More than the left half span (D) Whole span

Last Answer : (D) Whole span

If a constant section beam is subjected to a uniform bending moment throughout, its length bends to (A) A circular arc (B) A parabolic arc (C) A catenary (D) None of these

Description : If a constant section beam is subjected to a uniform bending moment throughout, its length bends  to  (A) A circular arc  (B) A parabolic arc  (C) A catenary  (D) None of these 

Last Answer : (A) A circular arc 

Mass velocity is independent of temperature & pressure, when the flow is (A) Unsteady through unchanged cross-section (B) Steady through changing cross-section (C) Steady and the cross-section is unchanged (D) Unsteady and the cross-section is changed

Description : Mass velocity is independent of temperature & pressure, when the flow is (A) Unsteady through unchanged cross-section (B) Steady through changing cross-section (C) Steady and the cross-section is unchanged (D) Unsteady and the cross-section is changed

Last Answer : (C) Steady and the cross-section is unchanged

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

A stream line is (A) Fixed in space in steady flow (B) Always the path of particle (C) Drawn normal to the velocity vector at every point (D) A line connecting the mid points of flow cross-section

Description : A stream line is (A) Fixed in space in steady flow (B) Always the path of particle (C) Drawn normal to the velocity vector at every point (D) A line connecting the mid points of flow cross-section

Last Answer : (A) Fixed in space in steady flow

Two dimensional flows occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plan

Description : Two dimensional flows occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plan

Last Answer : Answer: Option D

The shape of the bending moment diagram over the length of a beam, carrying a uniformly distributed load is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Description : The shape of the bending moment diagram over the length of a beam, carrying a uniformly  distributed load is always  (A) Linear  (B) Parabolic  (C) Cubical  (D) Circular

Last Answer : (B) Parabolic 

The shape of the bending moment diagram over the length of a beam, carrying a uniformly increasing load, is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Description : The shape of the bending moment diagram over the length of a beam, carrying a uniformly  increasing load, is always  (A) Linear  (B) Parabolic  (C) Cubical  (D) Circular 

Last Answer : (C) Cubical 

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

The flow of water through the hole in the bottom of a wash basin is an example of (A) Steady flow (B) Uniform flow (C) Free vortex (D) Forced vortex

Description : The flow of water through the hole in the bottom of a wash basin is an example of (A) Steady flow (B) Uniform flow (C) Free vortex (D) Forced vortex

Last Answer : Answer: Option C

General energy equation holds for (A) Steady flow (B) Turbulent flow (C) Laminar flow (D) Non-uniform flow

Description : General energy equation holds for (A) Steady flow (B) Turbulent flow (C) Laminar flow (D) Non-uniform flow

Last Answer : Answer: Option D

The flow in which the velocity vector is identical in magnitude and direction at every point, for any given instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Description : The flow in which the velocity vector is identical in magnitude and direction at every point, for any given instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option B