Description : A cross a metallic conductor of non-uniform cross-section, a constant potential difference is applied. The quantity which remain (s) constant along th
Last Answer : A cross a metallic conductor of non-uniform cross-section, a constant potential difference is applied ... current C. drift velocity D. electric field
Description : Uniform flow occurs when (A) The flow is steady (B) The flow is streamline (C) Size and shape of the cross section in a particular length remain constant (D) Size and cross section change uniformly along length
Last Answer : Answer: Option C
Description : The following assumption is not true in the theory of pure torsion: (A) The twist along the shaft is uniform (B) The shaft is of uniform circular section throughout (C) Cross- ... , which is plane before twist remains plane after twist (D) All radii get twisted due to torsion
Last Answer : (D) All radii get twisted due to torsion
Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)
Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder
Description : The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above
Last Answer : Answer: Option D
Description : In a R.C section under flexure, the assumption that a plane section before bending remains plane after bending leads to (a) Strain distribution being linear across the depth (b) ... strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth
Last Answer : (a) Strain distribution being linear across the depth
Description : The flow in a pipe or channel is said to be non-uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different ... The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path
Last Answer : Answer: Option B
Description : A liquid flows through a capillary tube. Then the velocity of the liquid is (a) Maximum at the walls of the tubs (b) Constant at all points in the cross section of the tube (c) Maximum along the axis of the tube (d) Independent of the pressure-head
Last Answer : Ans:(c)
Description : When current of one ampere is flowing across any cross-section of wire in one second, then the quantity of charge is said to be: (a) One coulomb (b) Three coulomb (c) One micro-coulomb (d) None of above
Last Answer : (a) One coulomb
Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero
Last Answer : a. remains the same
Description : An electric current I enters and leaves a uniform circular wire of radius a through diametrically opposite points. A charged paricle q moving along th
Last Answer : An electric current I enters and leaves a uniform circular wire of radius a through diametrically opposite points. A ... `qv(mu_(0)i)/(a)` D. zero
Description : An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric
Last Answer : (B) Isothermal
Description : The flow of a liquid through tapering pipe at a constant rate is an example of __________ flow. (A) Steady uniform (B) Steady non uniform (C) Unsteady uniform
Last Answer : (B) Steady non uniform
Description : Steady non-uniform flow is exemplified by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate
Last Answer : (D) Expanding tube at constant rate
Description : Unsteady non-uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate
Last Answer : (C) Expanding tube at increasing rate
Description : An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these
Last Answer : (B) Tapering pipe at either decreasing or increasing flow rate
Description : A flow through a long pipe at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow
Last Answer : Answer: Option A
Description : A flow through an expanding tube at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow
Description : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section
Last Answer : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift ... . If Assertion is false but Reason is true.
Description : Assertion : If a current flows through a wire of non-uniform cross-section, potential difference per unit length of wire is same throughout the length
Last Answer : Assertion : If a current flows through a wire of non-uniform cross-section, potential difference per ... . If Assertion is false but Reason is true.
Description : A particle of mass `m` and charge `q` moves with a constant velocity `v` along the positive `x` direction. It enters a region containing a uniform mag
Last Answer : A particle of mass `m` and charge `q` moves with a constant velocity `v` along the positive `x` direction. It enters ... `qaB//m` D. `q(b + a)B//2m`
Description : The flow in a pipe or channel is said to be uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different ... The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path
Description : The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above
Description : Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe
Last Answer : (C) Steadily decreasing flow through a reducing section
Description : A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the density of the charge-carriers in the wire
Last Answer : A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the ... ms^(-1)` D. `1xx10^(-2)ms^(-1)`
Description : Shear stress in a fluid flowing in a round pipe (A) Varies parabolically across the cross-section (B) Remains constant over the cross-section (C) Is zero at the centre and varies linearly with the radius (D) Is zero at the wall and increases linearly to the centre
Last Answer : (C) Is zero at the centre and varies linearly with the radius
Description : In which of the following cases, it is possible for flow to occur from low pressure to high pressure? (A) Flow of liquid upward in a vertical pipe (B) Flow through a converging section (C) Flow of air downward in a pipe (D) Impossible in a constant cross-section conduit
Last Answer : (B) Flow through a converging section
Description : The first element of 14 th group is carbon, which is a non-metal. The metallic members of this group are
Last Answer : tin and lead
Description : In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path
Last Answer : (B) The conversion of the reactant varies from point to point along a flow path
Description : Unsteady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate
Last Answer : (B) Long pipe at decreasing rate
Description : Steady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at constant rate (D) None of these
Last Answer : (A) Long pipe at constant rate
Description : In frictional fluid flow, the quantity, (P/ρ) + (V 2 /2gc) + gz/gc) is (A) Constant along a streamline (B) Not constant along a streamline (C) Increased in the direction of flow (D) None of these
Last Answer : (B) Not constant along a streamline
Description : Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum remains constant. Reason Magnetic force acts perpe
Last Answer : Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum ... Assertion is false but Reason is true.
Description : With increasing flow rate, the hydraulic efficiency of a centrifugal pump (A) Monotonically decreases (B) Decreases and then increases (C) Remains constant (D) Increases and then decreases
Last Answer : (A) Monotonically decreases
Description : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section `6.0xx10^(-7) m^(2)` and its resistance is measured to be
Last Answer : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section ` ... the material at the temperature of the experiment ?
Description : A stready current i is flowing through a conductor of uniform cross-section. Any segment of the conductor has
Last Answer : A stready current i is flowing through a conductor of uniform cross-section. Any segment of the ... charge D. charge proportional to current `i`
Description : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area of cross-section gets halved. Now, th
Last Answer : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area ... Omega` C. `1 Omega` D. `4 Omega`
Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature
Last Answer : it is directly proportional to the area of cross-section of wire
Description : Fluid flow at increasing rate through a diverging pipe is an example of __________ flow. (A) Steady uniform (B) Non-steady uniform (C) Steady non-uniform (D) Non-steady non-uniform
Last Answer : (D) Non-steady non-uniform
Description : 18. A flow through an expanding tube at increasing rate is called unsteady non-uniform flow. A) Yes B) No
Last Answer : A
Description : Velocity distribution for flow between two fixed parallel plates (A) Varies parabolically across the section (B) Is constant over the entire cross-section (C) Is zero at the plates and increases linearly to the mid-plane (D) None of these
Last Answer : (A) Varies parabolically across the section
Description : If we move a positive charge to a positive plate, then potential energy of charge is A. decreased B. increased C. remains constant D. dissipated
Last Answer : increased
Description : With increase in temperature, the thermal conductivity of non-metallic amorphous solids (A) Decreases (B) Increases (C) Remain constant (D) First decreases upto certain temperature and then increases
Last Answer : (B) Increases
Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis
Last Answer : (D) Bending stress is same at every section along its longitudinal axis
Description : The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage ... 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these
Last Answer : (B) (6 + 12) chains
Description : The tension in the wire rope supporting a lift moving with a uniform velocity a.Is more when the lift is moving upwards b.Is more when the lift is moving downwards c.Is less when the lift ... down-wards d.Is less when the lift is moving upwards e.Remains constant irrespective of the lift movement
Last Answer : e. Remains constant irrespective of the lift movement
Description : Charge passing through a conductor of cross-section area `A=0.3 m^(2)` is given by `q=3t^(2)+5t+2` in coluomb, where t is second. What is the value of
Last Answer : Charge passing through a conductor of cross-section area `A=0.3 m^(2)` is given by `q=3t^(2)+5t+2` ... . `2Omega` B. `1Omega` C. `4Omega` D. `5Omega`
Description : Charge passing through a conductor of cross-section area `A=0.3 m^(2)` is given by `q=3t^(2)+5t+2 in coluomb, where t is second. What is the value of
Last Answer : Charge passing through a conductor of cross-section area `A=0.3 m^(2)` is given by `q=3t^(2)+5t+2 in coluomb, ... ^(-5)m//s` D. `0.57xx10^(5)m//s`
Description : When a fluid flows over a solid surface, the (A) Velocity is uniform at any cross-section (B) Velocity gradient is zero at the solid surface (C) Resistance between the surface & the fluid is lesser as compared to that between the fluid layers themselves (D) Velocity is not zero at the solid surface
Last Answer : (B) Velocity gradient is zero at the solid surface
Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0
Last Answer : (B) 12.88