The coefficient of viscosity may be determined by (A) Capillary tube method (B) Orifice type viscometer (C) Rotating cylinder method (D) All of these

The coefficient of viscosity may be determined by
(A) Capillary tube method
(B) Orifice type viscometer
(C) Rotating cylinder method
(D) All of these
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Capillary tube method of viscosity measurement is based on the (A) Hagen-Poiseuille’s equation (B) Stoke's law (C) Navier-stokes equation (D) None of these

Description : Capillary tube method of viscosity measurement is based on the (A) Hagen-Poiseuille’s equation (B) Stoke's law (C) Navier-stokes equation (D) None of these

Last Answer : (A) Hagen-Poiseuille’s equation

The time taken for gravity flow of a fixed volume of liquid (as in Redwood viscometer) is directly proportional to its (A) Absolute viscosity (B) Ratio of absolute viscosity to density (C) Density (D) Reynolds number

Description : The time taken for gravity flow of a fixed volume of liquid (as in Redwood viscometer) is directly proportional to its (A) Absolute viscosity (B) Ratio of absolute viscosity to density (C) Density (D) Reynolds number

Last Answer : (B) Ratio of absolute viscosity to density

Flash point of an oil is determined by the (A) Pensky Martens apparatus (B) Ramsbottom apparatus (C) Saybolt viscometer (D) Conradson apparatus

Description : Flash point of an oil is determined by the (A) Pensky Martens apparatus (B) Ramsbottom apparatus (C) Saybolt viscometer (D) Conradson apparatus

Last Answer : (A) Pensky Martens apparatus

20. The coefficient of discharge is the ratio of theoretical discharge to the actual discharge through an orifice. A) True B) False

Description : 20. The coefficient of discharge is the ratio of theoretical discharge to the actual discharge through an orifice. A) True B) False

Last Answer : B

10. If the value of coefficient of discharge increases, the discharge through the orifice decreases. A) True B) False

Description : 10. If the value of coefficient of discharge increases, the discharge through the orifice decreases. A) True B) False

Last Answer : B

Coefficient of contraction is the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Loss of head in the orifice to the head of water available at the exit of the orifice (C) Loss of head in the orifice to the head of water available at the exit of the orifice (D) Area of jet at vena-contracta to the area of orifice

Description : Coefficient of contraction is the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Loss of head in the orifice to the head of water available at the exit of the ... available at the exit of the orifice (D) Area of jet at vena-contracta to the area of orifice

Last Answer : Answer: Option D

Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss of head in the orifice to the head of water available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Description : Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss ... available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Last Answer : Answer: Option C

The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of discharge) (A) Q = (2/3) Cd × b × (2g) × (H2 - H1) (B) Q = (2/3) Cd × b × (2g) × (H2 1/2 - H1 1/2) (C) Q = (2/3) Cd × b × (2g) × (H2 3/2 - H1 3/2) (D) Q = (2/3) Cd × b × (2g) × (H2 2 - H1 2 )

Description : The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of ... H1 3/2) (D) Q = (2/3) Cd b (2g) (H2 2 - H1 2 )

Last Answer : Answer: Option C

A jet of water discharging from a 40 mm diameter orifice has a diameter of 32 mm at its vena contracta. The coefficient of contraction is (A) 0.46 (B) 0.64 (C) 0.78 (D) 0.87

Description : A jet of water discharging from a 40 mm diameter orifice has a diameter of 32 mm at its vena contracta. The coefficient of contraction is (A) 0.46 (B) 0.64 (C) 0.78 (D) 0.87

Last Answer : Answer: Option B

Coefficient of velocity is defined as the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Area of jet at vena contracta to the area of orifice (C) Actual discharge through an orifice to the theoretical discharge (D) None of the above

Description : Coefficient of velocity is defined as the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Area of jet at vena contracta to the area of orifice (C) Actual discharge through an orifice to the theoretical discharge (D) None of the above

Last Answer : Answer: Option A

The value of coefficient of velocity for a sharp edged orifice __________ with the head of water. (A) Decreases (B) Increases (C) Remain same (D) None of these

Description : The value of coefficient of velocity for a sharp edged orifice __________ with the head of water. (A) Decreases (B) Increases (C) Remain same (D) None of these

Last Answer : Answer: Option B

Consider the following devices : 1. Orifice 2. Borda’s mouthpiece running free 3. Bell mouthed orifice 4. External mouthpiece What is the correct sequence of these devices by decreasing magnitude of coefficient of discharge? a) 2, 3, 1 and 4 b) 4, 3, 1 and 2 c) 4, 1, 3 and 2 d) 2, 1, 3 and 4

Description : Consider the following devices : 1. Orifice 2. Borda’s mouthpiece running free 3. Bell mouthed orifice 4. External mouthpiece What is the correct sequence of these devices by decreasing magnitude of coefficient of discharge? a) 2, 3, 1 and 4 b) 4, 3, 1 and 2 c) 4, 1, 3 and 2 d) 2, 1, 3 and 4

Last Answer : b) 4, 3, 1 and 2

Bernoulli's equation is applied to (A) Venturimeter (B) Orifice meter (C) Pitot tube (D) All of these

Description : Bernoulli's equation is applied to (A) Venturimeter (B) Orifice meter (C) Pitot tube (D) All of these

Last Answer : Answer: Option D

Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Description : Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Last Answer : Answer: Option D

Which of the following instrument can be used for measuring speed of an aeroplane? (A) Venturimeter (B) Orifice plate (C) Pitot tube(D) Rotameter

Description : Which of the following instrument can be used for measuring speed of an aeroplane? (A) Venturimeter (B) Orifice plate (C) Pitot tube (D) Rotameter

Last Answer : Answer: Option C

Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Description : Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Last Answer : Answer: Option D

Which of the following may be termed as a variable orifice flow-meter? (A) Rotameter (B) Pitot tube (C) V-notch (D) All (A), (B) and (C)

Description : Which of the following may be termed as a variable orifice flow-meter? (A) Rotameter (B) Pitot tube (C) V-notch (D) All (A), (B) and (C)

Last Answer : (A) Rotameter

Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Description : Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Last Answer : (A) Type of orifice

A glass tube of smaller diameter is used while performing an experiment for the capillary rise of water because (A) It is easier to see through the glass tube (B) Glass tube is cheaper than a metallic tube (C) It is not possible to conduct this experiment with any other tube (D) All of the above

Description : A glass tube of smaller diameter is used while performing an experiment for the capillary rise of water because (A) It is easier to see through the glass tube (B) Glass tube is cheaper than a metallic ... (C) It is not possible to conduct this experiment with any other tube (D) All of the above

Last Answer : Answer: Option A

The capillary rise at 20°C in a clean glass tube of 1 mm bore containing water is approximately (A) 5 mm (B) 10 mm (C) 20 mm (D) 30 mm

Description : The capillary rise at 20°C in a clean glass tube of 1 mm bore containing water is approximately (A) 5 mm (B) 10 mm (C) 20 mm (D) 30 mm

Last Answer : Answer: Option D

How can we measure specific gravity of milk? (1) Using a viscometer (2) Using an odometer (3) Using a hygrometer (4) Using a hydrometer

Description : How can we measure specific gravity of milk? (1) Using a viscometer (2) Using an odometer (3) Using a hygrometer (4) Using a hydrometer

Last Answer : (4) Using a hydrometer Explanation: A hydrometer is an instrument that measures the specific gravity of liquids the ratio of the density of the liquid to the density of water.

While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the same position in its tube, it indicates (A) The rotation axis is vertical (B) The trunnion axis is horizontal (C) The line of collimation is perpendicular to vertical axis (D) None of the above

Description : While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the  same position in its tube, it indicates  (A) The rotation axis is vertical  (B) The trunnion ... (C) The line of collimation is perpendicular to vertical axis  (D) None of the above

Last Answer : (A) The rotation axis is vertical

Pick up the correct statement from the following: (A) The maritime structures should be designed to withstand wave motion of air (B) The wind vortex results in conical depression in the air surface (C) A tube of air rotating at hundreds of kilometres per hour forms a tornado (D) all of the above

Description : Pick up the correct statement from the following: (A) The maritime structures should be designed to withstand wave motion of air (B) The wind vortex results in conical depression in the air surface (C) A tube of air rotating at hundreds of kilometres per hour forms a tornado (D) all of the above

Last Answer : (D) all of the above

Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability (A) Increases by 25 % (B) Increases by 50 % (C) Increases by 33.3 % (D) Decreases by 33.3 %

Description : Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability (A) Increases by 25 % (B) Increases by 50 % (C) Increases by 33.3 % (D) Decreases by 33.3 %

Last Answer : (B) Increases by 50 %

The ratio of absolute viscosity to mass density is known as (A) Specific viscosity (B) Viscosity index (C) Kinematic viscosity (D) Coefficient of viscosity

Description : The ratio of absolute viscosity to mass density is known as (A) Specific viscosity (B) Viscosity index (C) Kinematic viscosity (D) Coefficient of viscosity

Last Answer : Answer: Option C

called (A) Surface tension (B) Coefficient of viscosity (C) Viscosity (D) Osmosis

Description : called (A) Surface tension (B) Coefficient of viscosity (C) Viscosity (D) Osmosis

Last Answer : Answer: Option C

The absorption of ink by blotting paper involves: A. Viscosity of ink B. Capillary action phenomenon C. Diffusion of ink through the blotting D. Siphon action

Description : The absorption of ink by blotting paper involves: A. Viscosity of ink B. Capillary action phenomenon C. Diffusion of ink through the blotting D. Siphon action

Last Answer : ANSWER: B

In an oil lamp, the oil rises up in the wick due to _____? A. Capillary action B. Atmospheric pressure C. Viscosity of oil D. Change in temperature

Description : In an oil lamp, the oil rises up in the wick due to _____? A. Capillary action B. Atmospheric pressure C. Viscosity of oil D. Change in temperature

Last Answer : ANSWER: A

The absorption of ink by blotting paper involves (a) Viscosity of ink (b) Capillary action phenomenon (c) Diffusion of ink through the blotting (d) Siphon action

Description : The absorption of ink by blotting paper involves (a) Viscosity of ink (b) Capillary action phenomenon (c) Diffusion of ink through the blotting (d) Siphon action

Last Answer : Ans:(b)

The oil in the wick of an oil lamp rises up due to (a) Pressure difference (b) Capillary action (c) Low viscosity of oil (d) Gravitational force

Description : The oil in the wick of an oil lamp rises up due to (a) Pressure difference (b) Capillary action (c) Low viscosity of oil (d) Gravitational force

Last Answer : Ans:(b)

A fountain pen works on the principle of (1) Flow of liquids from higher to lower potential (2) Capillary action (3) Bernoulli's principle (4) Viscosity of liquids

Description : A fountain pen works on the principle of (1) Flow of liquids from higher to lower potential (2) Capillary action (3) Bernoulli's principle (4) Viscosity of liquids

Last Answer : (2) Capillary action Explanation: A fountain pen is a nib pen that, unlike its predecessor the dip pen, contains an internal reservoir of water-based liquid ink. The pen draws ink from the ... to flow in narrow spaces without the assistance of, and in opposition to external forces like gravity.

The oil in the wick of an oil lamp rises up due to: (1) capillary action (2) low viscosity of oil (3) gravitational force (4) pressure difference

Description : The oil in the wick of an oil lamp rises up due to: (1) capillary action (2) low viscosity of oil (3) gravitational force (4) pressure difference

Last Answer : (1) capillary action Explanation: The oil in the wick of an oil lamp rises up due to capillary action.

A solid needle placed horizon-tally on the surface of the water floats due to – (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Description : A solid needle placed horizon-tally on the surface of the water floats due to – (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Last Answer : (3) surface tension of water Explanation: A solid needle placed horizontally on the surface of water floats due to surface tension of water.

The absorption of ink by blotting paper involves - (1) capillary action phenomenon (2) viscosity of ink (3) siphon action (4) diffusion of ink through the blotting

Description : The absorption of ink by blotting paper involves - (1) capillary action phenomenon (2) viscosity of ink (3) siphon action (4) diffusion of ink through the blotting

Last Answer : (1) capillary action phenomenon Explanation: The ability of a liquid to flow in narrow spaces without the assistance of, or even in opposition to, external forces like gravity.

Which of the following is a result of Surface tension? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Description : Which of the following is a result of Surface tension? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Last Answer : (3) Capillary action Explanation: Capillary action is the result of adhesion and surface tension. Adhesion of water to the walls of a vessel will cause an upward force on the liquid at the edges ... intact, so instead of just the edges moving upward, the whole liquid surface is dragged upward.

According to Poiseuille's law, the permeability for gas flow through a capillary is proportional to (where, μ = gas viscosity) (A) μ (B) 1/μ (C) √μ (D) μ

Description : According to Poiseuille's law, the permeability for gas flow through a capillary is proportional to (where, μ = gas viscosity) (A) μ (B) 1/μ (C) √μ (D) μ

Last Answer : (B) 1/μ

In an oil lamp, the oil rises up in the wick due to? A. Capillary action (Answer) B. Atmospheric pressure C. Viscosity of oil D. Change in temperature

Description : In an oil lamp, the oil rises up in the wick due to? A. Capillary action (Answer) B. Atmospheric pressure C. Viscosity of oil D. Change in temperature

Last Answer : A. Capillary action (Answer)

The absorption of ink by blotting paper involves-----? A. Viscosity of ink B. Capillary action phenomenon (Answer) C. Diffusion of ink through the blotting D. Siphon action

Description : The absorption of ink by blotting paper involves-----? A. Viscosity of ink B. Capillary action phenomenon (Answer) C. Diffusion of ink through the blotting D. Siphon action

Last Answer : B. Capillary action phenomenon (Answer)

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

The oil in the wick of an oil lamp rises up due to: (1) capillary action (2) low viscosity of oil (3) gravitational force (4) pressure difference

Description : The oil in the wick of an oil lamp rises up due to: (1) capillary action (2) low viscosity of oil (3) gravitational force (4) pressure difference

Last Answer : capillary action

A solid needle placed horizontally on the surface of the water floats due to (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Description : A solid needle placed horizontally on the surface of the water floats due to (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Last Answer : surface tension of water

Which of the following is a result of Surface tension ? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Description : Which of the following is a result of Surface tension ? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Last Answer : Capillary action

A fountain pen works on the principle of (1) flow of liquids from higher to lower potential (2) capillary action (3) Bernoulli’s principle (4) Viscosity of liquids

Description : A fountain pen works on the principle of (1) flow of liquids from higher to lower potential (2) capillary action (3) Bernoulli’s principle (4) Viscosity of liquids

Last Answer : capillary action

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Pick out the wrong statement. (A) Orifice baffles are never used in a shell and tube heat exchanger (B) Pressure drop on the shell side of a heat exchanger depends upon tube pitch also

Description : Pick out the wrong statement. (A) Orifice baffles are never used in a shell and tube heat exchanger (B) Pressure drop on the shell side of a heat exchanger depends upon tube pitch also

Last Answer : (A) Orifice baffles are never used in a shell and tube heat exchanger

26. Air velocity in ducts can be measured by using and manometer a) Orifice meter b) Borden gauge c) Pitot tube d) Anemometer

Description : Air velocity in ducts can be measured by using and manometer a) Orifice meter b) Borden gauge c) Pitot tube d) Anemometer

Last Answer : Pitot tube

Compare orifice plate with venturi tube with reference to: (i) Working principle (ii) Construction (iii) Cost (iv) Pressure loss

Description : Compare orifice plate with venturi tube with reference to: (i) Working principle (ii) Construction (iii) Cost (iv) Pressure loss

Last Answer : Venturi Flow Meter vs Orifice Plate Meter

A paper disc or small cylinder containing antibiotic is used in the antibiotic sensitivity assay known as the a. Tube dilution method. b. Immunodiffusion method. c. Agar diffusion method. d. Passive detection method.

Description : A paper disc or small cylinder containing antibiotic is used in the antibiotic sensitivity assay known as the a. Tube dilution method. b. Immunodiffusion method. c. Agar diffusion method. d. Passive detection method.

Last Answer : c. Agar diffusion method.

Domestic refrigerator working on vapour compression cycle uses the following type of expansion device (a) electrically operated throttling valve (b) manually operated valve (c) thermostatic valve (d) capillary tube

Description : Domestic refrigerator working on vapour compression cycle uses the following type of expansion device (a) electrically operated throttling valve (b) manually operated valve (c) thermostatic valve (d) capillary tube

Last Answer : Ans: d

Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Description : Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Last Answer : ANSWER : C