Description : . For gasoline, the flash point (
Last Answer : (D) None of these
Description : Flash point of diesel/kerosene (>50°C) is determined by the (A) Abel apparatus (B) Pensky-Martens apparatus (C) Saybolt chromometer (D) None of these
Last Answer : (A) Abel apparatus
Description : Flash point of atmospheric distillation residue is determined by __________ apparatus. (A) Pensky-Martens (closed cup type) (B) Abel (C) Cleveland (open cup type) (D) None of these
Last Answer : (C) Cleveland (open cup type)
Description : Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel ... An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index
Last Answer : (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index
Description : Pensky-Marten apparatus is used for those oils, whose flash points are __________ °F. (A) < 120 (B) > 120 (C) < 90 (D) 90-110
Last Answer : (B) > 120
Description : Which one is used to determine the colour of petroleum products? (A) Colour comparator (B) Saybolt chromometer (C) Cleveland apparatus (D) None of these
Last Answer : (A) Colour comparator
Description : The coefficient of viscosity may be determined by (A) Capillary tube method (B) Orifice type viscometer (C) Rotating cylinder method (D) All of these
Last Answer : Answer: Option D
Description : The time taken for gravity flow of a fixed volume of liquid (as in Redwood viscometer) is directly proportional to its (A) Absolute viscosity (B) Ratio of absolute viscosity to density (C) Density (D) Reynolds number
Last Answer : (B) Ratio of absolute viscosity to density
Description : Abel apparatus is used for those oils, whose flash points are _______°F. (A) < 120 (B) > 120 (C) > 280 (D) 300-600
Last Answer : (A) < 120
Description : How can we measure specific gravity of milk? (1) Using a viscometer (2) Using an odometer (3) Using a hygrometer (4) Using a hydrometer
Last Answer : (4) Using a hydrometer Explanation: A hydrometer is an instrument that measures the specific gravity of liquids the ratio of the density of the liquid to the density of water.
Description : Nitrogen present in the flue gas is determined in the Orsat apparatus by absorbing it in (A) KOH (B) Ammoniacal cuprous chloride (C) Pyrogallol solution (D) None of these
Description : True boiling point apparatus is used for the (A) Determination of characterisation factor (B) Evaluation of oil stocks (C) Determination of true vapour pressure (D) None of these
Description : How do I stop my Dr Martens from cracking?
Last Answer : I’ve heard about trying vasoline, but this is second-hand information.
Description : Do Doc Martens run small, narrow, etc.?
Last Answer : In my experience, there is nothing like actually trying them on. I’d suggest a visit to the mall to avoid having to return a present if they don’t fit like you thought they would.
Description : How to get rid of martens in the soil?
Last Answer : I would personally leave her there if I could. Otherwise, it is given to expel human hair, dog fur, shit from some predator. She doesn't like it if she plays radio there all the time.
Description : Viscosity index of a lubricating oil (A) Is the measure of its flash point (B) Is the measure of variation of viscosity with temperature (C) Should be low (D) None of these
Last Answer : (B) Is the measure of variation of viscosity with temperature
Description : Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point
Last Answer : (C) Higher flash point and fire point
Description : Which of the following tests is not done for transformer oil? (A) Flash point and acid value (B) Aniline point (C) Dielectric strength (D) Copper strip corrosion test
Last Answer : (B) Aniline poin
Description : Flash point of an oil gives an idea of the (A) Nature of boiling point diagram of the system (B) Amount of low boiling fraction present (C) Explosion hazards (D) All (A), (B) and (C)
Last Answer : (A) Nature of boiling point diagram of the system
Description : A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point
Last Answer : (A) Viscosity index
Description : Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point
Last Answer : (C) Aniline point
Description : Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil
Last Answer : (D) Heavy fuel oil
Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil
Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point
Description : Which temperature for a lubricating oil will be lowest ? (A) Flash point (B) Fire point (C) Pour point (D) Boiling
Last Answer : Ans: C
Description : Which of the following statements is a requirement of Coast Guard Regulations (46 CFR) concerning emergency diesel generator engines? A. The fuel must have a flash point not less than 75°F. B. ... to each side of the vertical. D. The starting battery must produce 12 consecutive cranking cycles.
Last Answer : Answer: C
Description : The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C
Last Answer : (d) 104°C
Description : Which of the following has the lowest flash point of all? (A) Diesel (B) Kerosene (C) Petrol
Last Answer : (C) Petrol
Description : Flash point of motor gasoline may be around __________ °C. (A) 10 (B) 45 (C) 100 (D) 150
Last Answer : (B) 45
Description : In case of liquid petrofuels, momentary combustion is observed at its (A) Flash point (B) Preheating temperature corresponding to viscosity of 25 centistokes (C) Flame temperature (D) Fire point
Last Answer : (A) Flash point
Description : Which of the following has the highest flash point of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oi
Last Answer : (D) Furnace oil
Description : Higher vapour pressure of gasoline indicates (A) Low flash point (B) High breathing loss (C) Both (A) and (B) (D) Neither (A) nor (B
Last Answer : (D) Neither (A) nor (B
Description : The most important property for a jet fuel is its (A) Viscosity (B) Freezing point (C) Calorific value (D) Flash poin
Last Answer : (B) Freezing point
Description : Flash point of a liquid petroleum fuel gives an idea about its (A) Volatility (B) Explosion hazards characteristics (C) Nature of boiling point diagram (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : __________ prohibits the use of alcohols directly in petrol engines. (A) Low octane number (B) High cost & availability (C) Low flash point (D) Low calorific value
Last Answer : (B) High cost & availability
Description : Flash point of most vegetable oils is about __________ °C. (A) 50 (B) 100 (C) 200 (D) 300
Last Answer : (C) 200
Description : Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)
Last Answer : (C) Equal to cetane number plus 3
Description : Absolute vapor pressure of petrofuels is found by Reid bomb which is heated in water bath to 100°F. In Reid apparatus, the ratio of the volume of air chamber to that of the liquid fuel chamber is (A) 4 (B) 3 (C) 2 (D) 1
Last Answer : (A) 4
Description : In Orsat's apparatus, ammoniacal cuprous chloride is used for selectivity absorbing (A) CO (B) CO2 (C) O2 (D) H2O
Last Answer : (A) CO
Description : Orsat apparatus is meant for (A) Gravimetric analysis of flue gas (B) Finding out combustion efficiency (C) Direct determination of nitrogen in flue gas by absorbing it in ammoniacal cuprous chloride (D) None of these
Description : The sequence of absorption in flue gas analysis by Orsat's apparatus is respectively (A) CO2 , O2 , CO (B) CO, O2 , CO2 (C) CO2 , CO, O2
Last Answer : (A) CO2 , O2 , CO
Description : If CO2 is not fully absorbed by the KOH solution meant for its absorption in the orsat apparatus, it will appear as (A) O2 (B) CO (C) N2 (D) SO2
Last Answer : (D) SO2
Description : Orsat apparatus (A) Gives flue gas analysis on dry basis (B) Determines N2 in flue gas indirectly (C) Can’t determine CO in flue gas, if it is < 0.2% (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : In flue gas analysis by Orsat's apparatus, oxygen is absorbed by (A) Potassium hydroxide (B) Cuprous chloride (C) Alkaline pyrogallol solution
Last Answer : (C) Alkaline pyrogallol solution
Description : The pyrogallol solution used in Orsat apparatus can absorb (A) Only O2 (B) Both O2 and CO2 (C) Both O2 and CO (D) All CO, CO2 , and O2
Last Answer : (B) Both O2 and CO2
Description : In flue gas analysis by Orsat's apparatus, carbon dioxide is absorbed by (A) Potassium hydroxide (B) Dilute potassium carbonate (C) Cuprous chloride (D) Alkaline pyrogallol solution
Last Answer : (A) Potassium hydroxide
Description : The cuprous chloride used in orsat apparatus can absorb (A) Only CO (B) Both CO and CO2 (C) Both CO and O2 (D) All CO, CO2 , and O2
Last Answer : (D) All CO, CO2 , and O2
Description : KOH solution used in Orsat apparatus absorbs (A) CO2 (B) SO2 (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : In flue gas analysis by Orsat's apparatus, carbon monoxide is absorbed by (A) Cuprous chloride (B) Potassium hydroxide (C) Alkaline pyrogallol solution (D) None of these
Last Answer : (A) Cuprous chloride
Description : BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed
Last Answer : (A) Specific surface of a porous catalyst