Sharp crested weirs are generally used
(A) For large flows
(B) For small flows
(C) For streams carrying high sediment loads
(D) For rivers carrying floating debris

1 Answer

Answer :

Answer: Option A

Related questions

Description : A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following:  (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in  the river, is called trap efficiency  ( ... less  (C) Large capacity reservoirs on small rivers generally silt more  (D) All the above

Last Answer : (D) All the above

Description : 06. The formula for discharge over a sharp-crested weir and Ogee weir is same as that of a rectangular weir. A) Agree B) Disagree

Last Answer : A

Description : 13. In a sharp-crested weir, the thickness of the weir is kept less than half of the height of water above the crest of the weir. A) True B) False

Last Answer : A

Description : Pick up the correct statement from the following:  (A) Large solids carried along the river bed, is known as bed load  (B) The fine sediment deposits are generally near the face of ... ) Deposition of sediment in the reservoir, reduces the capacity of the reservoir  (D) All the above 

Last Answer : (D) All the above 

Description : How do streams transport sediment?

Last Answer : Stream transport sediment in three ways, dissolved load, (ionsin solution being carried downstream), suspended load, (suspendedsediment that floats freely downstream) and bed load, (sedimentthat rolls or scoots along the bottom of the river).

Description : A weir, generally, used as a spillway of a dam is (A) Narrow crested weir (B) Broad crested weir (C) Ogee weir (D) Submerged weir

Last Answer : Answer: Option C

Description : Which of the following is put into anaerobic sludge digester for further sewage treatment? (a) Primary sludge (b) Floating debris (c) Effluents of primary treatment (d) Activated sludge

Last Answer : (d) Activated sludge

Description : Most important source of water for public water supply, is from (A) Lakes (B) Ponds (C) Streams (D) Rivers

Last Answer : (D) Rivers

Description : Pick up the incorrect statement from the following. The source of surface water is from  (A) Streams and rivers  (B) Storage reservoirs  (C) Springs  (D) Ponds and lakes 

Last Answer : (C) Springs 

Description : The intake opening is generally covered by a screen to prevent entry of debris etc. and its level is  kept  (A) At the level of water of the source  (B) At the bottom of water of the source  (C) At about 2.5 m above the bottom  (D) None of these 

Last Answer : (C) At about 2.5 m above the bottom 

Description : The intake opening is generally covered by a screen to prevent entry of debris etc. and its level is kept (A) At the level of water of the source (B) At the bottom of water of the source (C) At about 2.5 m above the bottom (D) None of these

Last Answer : (C) At about 2.5 m above the bottom

Description : A boat carrying a number of large stones is floating in a water tank. If the stones are unloaded into the water, the level of water in the tank (a) Will remain unchanged (b) Will rise (c) Will fall (d) Will rise till half the number of stones are unloaded and then will begin to fall

Last Answer : Ans:(c)

Description : Struts are load carrying members of a frame structure which are subjected to  (A) Axial tension loads  (B) Axial compressive loads  (C) Torsional loads  (D) Transverse loads 

Last Answer : (B) Axial compressive loads 

Description : Ties are load carrying members of a frame, which are subjected to  (A) Transverse loads  (B) Axial tension loads  (C) Axial compressive loads  (D) Torsional loads 

Last Answer : (B) Axial tension loads 

Description : In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at (A) Less loaded column (B) More loaded column (C) A point of the maximum shear force (D) A point of zero shear force

Last Answer : Answer: Option D

Description : If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2acting on strips parallel to l2 and l1 is (A) ... l1 (B) w1/w2 = (l2/l1)² (C) w1/w2 = (l2/l1)3 (D) w1/w2 = (l2/l1)

Last Answer : Answer: Option D

Description : The type of bond provided in brick masonry for carrying heavy loads is (A) Single Flemish bond (B) Double Flemish bond (C) English bond (D) Zigzag bond

Last Answer : Answer: Option C

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : What If a piece of space debris is too large to be a meteoroid and too small to be a planet it could be?

Last Answer : It could be an asteroid or comet.

Description : Runoff is the quantity of water which flows (A) In sewer pipes (B) Due to leakage in pipes (C) In rivers (D) None of these

Last Answer : (C) In rivers

Description : what rivers receive water from smaller streams call?

Last Answer : source

Description : What is called when a river ans all the streams and smaller rivers that flow into in together make up a?

Last Answer : Need answer

Description : How will this affect the mountain streams and rivers downstream?

Last Answer : Since we have no idea what "this" might be, we can't answer thequestion properly.

Description : Are swans found in rivers and streams?

Last Answer : The habitats favoured by swans vary with species, but they are often found on rivers and streams, particularly slower flowing ones. They also frequent lakes.

Description : What is the difference between streams and rivers and ponds and lakes?

Last Answer : Streams and rivers flow down a long path and ponds and lakesstay in one place and not flowing like streams and rivers.

Description : Which one of the following rivers thrice forks into two streams and reunites a few miles farther on, thus forming the islands of Srirangapatanam, Sivasamudram and Srirangam? (a) Cauvery (b) Tungabhadra (c) Krishna (d) Godavari

Last Answer : Ans: (a)

Description : Which of the following group of rivers in India are likely to show the least erosional activity? (a) Himalayan rivers (b) Those rising in the Great Plain of India (c) The thin streams flowing into the Arabian Sea (d) The eastward flowing Peninsular rivers

Last Answer : Ans: (d)

Description : Which one among the following is not a reason for practising tank irrigation in the Peninsular India? [NDA 2011] (a) The undulating relief and hard rocks (b) little percolation of rain ... of Peninsular India are perennial (d) There are many streams which become torrential during rainy season

Last Answer : Ans: (c)

Description : Which is the main source of irrigation of Agricultural land in India? a. Tanks b. Rivers c. Streams d. Canals e. Wells

Last Answer : e. Wells

Description : The following is an example of Terrestrial Biome A. Tropical rain forest B. Rivers C. Streams D. All of the above

Last Answer : A. Tropical rain forest

Description : The following is an example of Terrestrial Biome A. Tropical rain forest B. Rivers C. Streams D. All of the above

Last Answer : A. Tropical rain forest

Description : In a broad-crested weir, the discharge is maximum if the head of water on the downstream side of weir is __________ the head of water on the upstream side of weir. (A) Equal to (B) One-third (C) Two-third (D) Three-fourth

Last Answer : Answer: Option C

Description : A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option C

Description : The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/ (D) 1.71 Cd × L × H 3/

Last Answer : Answer: Option D

Description : When the water level on the downstream side of a weir is above the top surface of a weir, the weir is known as (A) Narrow-crested weir (B) Broad-crested weir (C) Ogee weir (D) Submerged weir

Last Answer : Answer: Option D

Description : A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option B

Description : Why does the v notch give more accurate flow measurement than any other weirs?

Last Answer : Need answer

Description : For measuring uniform flow of water, weirs used are

Last Answer : Ans.Rectangular and Trapezoidal weir

Description : Which organ gets affected in Weirs disease? (1) Liver (2) Lung (3) Heart (4) Kidney

Last Answer : (4) Kidney Explanation: Weil's disease is a severe form of leptospirosis, a type of infection caused by Leptospira bacteria. The classic form of severe leptospirosis is known as Weil's disease, which is characterized by liver damage (causing jaundice), kidney failure, and bleeding.

Description : Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Last Answer : Answer: Option D

Description : High pH value of water does not produce (A) Incrustation (B) Sediment deposits (C) Tuberculation (D) None of these

Last Answer : (C) Tuberculation

Description : To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is (A) Middle half rule of columns (B) Middle third rule of columns (C) Middle fourth rule of columns (D) None of these

Last Answer : (C) Middle fourth rule of columns

Description : Pick up the correct statement from the following: (A) The sand in the sand pile is well compacted (B) The sand is kept moist at the time of placing and tamping (C) Sand piles are generally used under column loads (D) All of the above

Last Answer : Answer: Option D

Description : Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The ... to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Last Answer : Answer: Option D

Description : Assertion (A): In hydrodynamic journal bearings, the rotating journal is held in floating condition by the hydrodynamic pressure developed in the lubricant. Reason (R): Lubricant flows in a converging-diverging channel. [IES-1994] ... A (c) A is true but R is false (d) A is false but R is true

Last Answer : (a) Both A and R are individually true and R is the correct explanation of A

Description : Floating gradients are generally provided (A) Along maximum gradients (B) Along minimum gradients (C) At summit curves (D) At valley curves

Last Answer : Answer: Option C

Description : Mr. and Mrs. Smith were walking home from the shopping mall with their purchases when Mr. Smith began to complain that his load was too heavy. Mrs. Smith turned to her husband and said, 'I don't ... gave you just one of mine, we would have equal loads.' How many parcels was each carrying? -Riddles

Last Answer : Mrs. Smith was carrying seven parcels and Mr. Smith was carrying five.