Pick out the wrong statement. (A) Copper is the metal having the highest electronic conductivity (B) Hardenability & Weldability of metals are inversely related (C) Covalent bonding formed by sharing of electrons is present in all semiconductor materials (D) Glass transition temperature applies to 'polymers' but not to 'glasses'

Pick out the wrong statement.
(A) Copper is the metal having the highest electronic conductivity
(B) Hardenability & Weldability of metals are inversely related
(C) Covalent bonding formed by sharing of electrons is present in all semiconductor materials
(D) Glass transition temperature applies to 'polymers' but not to 'glasses'
by

1 Answer

Answer :

Option A
by

Related questions

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making

Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Description : Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Last Answer : Option B

C and Si both have same lattice structure, having 4 bonding electrons in each. However, C is insulator where as Si is intrinsic semiconductor. This is because (1) The four bonding electrons in the case of C lie in the third orbit, whereas for Si they lie in the fourth orbit (2) In case of C the valance band is not completely filled at absolute zero temperature (3) In case of C the conduction band is partly filled even at absolute zero temperature (4) The four bonding electrons in the case of C lie in the second orbit, whereas in the case of Si they lie in the third

Description : C and Si both have same lattice structure, having 4 bonding electrons in each. However, C is insulator where as Si is intrinsic semiconductor. This is because (1) The four bonding electrons in the case of C ... the case of C lie in the second orbit, whereas in the case of Si they lie in the third

Last Answer : (4) The four bonding electrons in the case of C lie in the second orbit, whereas in the case of Si they lie in the third

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Description : Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Last Answer : C) Teflon is formed by step growth polymerisation

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Covalent bonds are formed by the sharing of a pair of ____. a. atoms c. electrons b. neurons d. protons

Description : Covalent bonds are formed by the sharing of a pair of ____. a. atoms c. electrons b. neurons d. protons

Last Answer : c. electrons

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Description : Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Last Answer : Option C

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

Pick out the wrong statement. (A) Isotopes have the same number of protons & electrons, but different number of neutrons (B) Hydrogen has two isotopes (C) In ordinary hydrogen, 1H1 and 1H2 are present in the ratio 6400:1 (D) None of these

Description : Pick out the wrong statement. (A) Isotopes have the same number of protons & electrons, but different number of neutrons (B) Hydrogen has two isotopes (C) In ordinary hydrogen, 1H1 and 1H2 are present in the ratio 6400:1 (D) None of these

Last Answer : (B) Hydrogen has two isotopes

Which of the listed groups of electrical insulation materials is best suited for the highest operating temperatures? A. impregnated cotton and silk B. unimpregnated paper and cotton C. pure glass and quartz D. mica and porcelain with bonding agents

Description : Which of the listed groups of electrical insulation materials is best suited for the highest operating temperatures? A. impregnated cotton and silk B. unimpregnated paper and cotton C. pure glass and quartz D. mica and porcelain with bonding agents

Last Answer : Answer: C

What is elasticity in polymers generally related to amount of hydrogen bonding between different subunits number of subunits in the polymer chain its greater tensile strength the synthetic composure?

Description : What is elasticity in polymers generally related to amount of hydrogen bonding between different subunits number of subunits in the polymer chain its greater tensile strength the synthetic composure?

Last Answer : amount of hydrogen bonding between different subunitsnumber of subunits in the polymer chainits greater tensile strengththe synthetic composure

For _______ bonding, one or more electrons are transferred between atoms. a. hydrogen b. ionic c. peptide d. covalent

Description : For _______ bonding, one or more electrons are transferred between atoms. a. hydrogen b. ionic c. peptide d. covalent

Last Answer : b. ionic

Materials having electrical conductivity much less than most of the metals but much greater than that of...

Description : Materials having electrical conductivity much less than most of the metals but much greater than that of typical insulators, are known as A. Thermistors B. Varistors C. Semi-conductors D. Variable resistors. 

Last Answer : Materials having electrical conductivity much less than most of the metals but much greater than that of typical insulators, are known as Semi-conductors.

_______are the materials having electrical conductivity much less than most of the metals but much greater...

Description : _______are the materials having electrical conductivity much less than most of the metals but much greater than that of typical insulators.

Last Answer : Semi-conductors are the materials having electrical conductivity much less than most of the metals but much greater than that of typical insulators.

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its fatigue strength (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Description : Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its ... (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Last Answer : (C) Cold working of a metal decreases its fatigue strength

Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Description : Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Last Answer : (A) Polymers made of only one monomer is called homopolyme

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Equal sharing of electrons is called _____. a. ionic bonds b. covalent bonds bonds c. double bonds d. triple bonds

Description : Equal sharing of electrons is called _____. a. ionic bonds b. covalent bonds bonds c. double bonds d. triple bonds

Last Answer : b. covalent bonds bonds

Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Description : Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Last Answer : (c) Metals

Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic (bcc) crystal lattice structure is stronger & less ductile than those having face centred cubic (fcc) crystal lattice structure (C) Tungsten has a body centred cubic (bcc) crystal lattice structure (D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Description : Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic ... D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Last Answer : (C) Tungsten has a body centred cubic (bcc) crystal lattice structure

Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Description : Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Last Answer : (B) Cokes of high reactivity are obtained from strongly coking coals

Pick out the wrong statement about a streamline. (A) It is always parallel to the main direction of the fluid flow (B) It is a line across which there is no flow and it is equivalent to a rigid boundary(C) Streamlines intersect at isolated point of zero velocity and infinitevelocity(D) The fluid lying between any two streamlines can be considered to be inisolation and the streamline spacing varies inversely as the velocity

Description : Pick out the wrong statement about a streamline. (A) It is always parallel to the main direction of the fluid flow (B) It is a line across which there is no flow and it is ... any two streamlines can be considered to be in isolation and the streamline spacing varies inversely as the velocity

Last Answer : (A) It is always parallel to the main direction of the fluid flow

Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these

Description : Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these

Last Answer : (A) Applies to elastic deformation

The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Description : The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Last Answer : A) T

Why are transition metal fluorides are ionic in nature where as chlorides and bromides are covalent in nature .

Description : Why are transition metal fluorides are ionic in nature where as chlorides and bromides are covalent in nature . 

Last Answer : Ans - It is because of fluorine is most electronegative where as Cl and Br are less electro negative . Greater the difference in electro negativity more will be ionic character .

Pick the wrong statement: hydrogen bonding results in (a) Increased solubility in water (b) Higher Van der Waal's forces (c) Molecular association (d) Abnormal boiling point

Description : Pick the wrong statement: hydrogen bonding results in (a) Increased solubility in water (b) Higher Van der Waal's forces (c) Molecular association (d) Abnormal boiling point

Last Answer : Ans:(b)

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Pick out the wrong statement. (A) Reciprocal of the resistance to heat flow is called thermal conductance (B) Unit of thermal conductance is W/°K (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A (D) None of these

Description : Pick out the wrong statement. (A) Reciprocal of the resistance to heat flow is called thermal conductance (B) Unit of thermal conductance is W/°K (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A (D) None of these

Last Answer : (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Last Answer : (B) Sharp melting points

(3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word traces its origins back to the latin lux, meaning "light", and generally implies radiance, gloss, or brilliance. Metals in general have high electrical conductivity, high thermal conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Description : (3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word ... conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Last Answer : Cloud is a colloidal dispersion of – (1) Air in a dispersion medium of water (2) Fog in a dispersion medium of water (3) Mist in a dispersion medium of air (4) Water drops in a dispersion medium of air

Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial setting rate (C) Acid resistant cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Description : Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial ... cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Last Answer : (A) High early strength cement are made from materials having high silica to lime ratio

Cold work tool steel should have (A) High toughness (B) Poor hardenability (C) High wear resistance (D) All (A), (B) & (C)

Description : Cold work tool steel should have (A) High toughness (B) Poor hardenability (C) High wear resistance (D) All (A), (B) & (C)

Last Answer : (C) High wear resistance

High speed steel should have high (A) Toughness (B) Wear resistance (C) Hardenability (D) Both (B) & (C)

Description : High speed steel should have high (A) Toughness (B) Wear resistance (C) Hardenability (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon gases carburise the surface of steel at annealing temperatures (C) Active nitrogen (formed by cracking ammonia at the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration of A (B) Transition state theory approaches the problem of calculating reaction rates by concentrating on the idea of activated complexes (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases (D) If the rate of an irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Description : Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration ... irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Last Answer : (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases

What are transition elements? (1) Elements whose two outermost shells are incomplete (2) Elements which possess properties of both, metals and non-metals (3) They have eight electrons in the outermost shell (4) Elements whose three outermost shells are incomplete

Description : What are transition elements? (1) Elements whose two outermost shells are incomplete (2) Elements which possess properties of both, metals and non-metals (3) They have eight electrons in the outermost shell (4) Elements whose three outermost shells are incomplete

Last Answer : (1) Elements whose two outermost shells are incomplete

Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electronegativity (3) Low ionization energy (4) Malleability

Description : Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electronegativity (3) Low ionization energy (4) Malleability

Last Answer : (1) Tendency to gain electrons Explanation: The transition metals have a tendency to lose electrons. Since the electrons in the highest energy level are actually on a lower principal enemy number than the ... ions, the 4s electrons are always lost first; so, they form only cations (positive ions).

Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electro negativity (3) Low ionization energy (4) Malleability

Description : Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electro negativity (3) Low ionization energy (4) Malleability

Last Answer : (1) Tendency to gain electrons Explanation: The transition metals have a tendency to lose electrons. Since the electrons in the highest energy level are actually on a lower principal energy number than the ... makes it relatively easy to lose some or all of their electrons to land in stable state.

Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electronegativity (3) Low ionization energy (4) Malleability

Description : Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electronegativity (3) Low ionization energy (4) Malleability 

Last Answer : Tendency to gain electrons

The hardenability of steel decreases with (A) Decrease in dislocation density (B) Increase in solutionising temperature (C) Increase in strength (D) Decrease in grain size

Description : The hardenability of steel decreases with (A) Decrease in dislocation density (B) Increase in solutionising temperature (C) Increase in strength (D) Decrease in grain size

Last Answer : D) Decrease in grain size

Pick out the wrong statement. (A) Atoms with same number of nucleons but different number of protons are called isobars (B) Atoms with same number of protons but different number of nucleons are called isoters (C) Out of α, β, and γ-rays, the one having maximum penetration power are γ-rays (D) The product formed by emission of α-particle has mass number less by 4 units than the parent nuclide

Description : Pick out the wrong statement. (A) Atoms with same number of nucleons but different number of protons are called isobars (B) Atoms with same number of protons but different number of nucleons are ... product formed by emission of α-particle has mass number less by 4 units than the parent nuclide

Last Answer : (B) Atoms with same number of protons but different number of nucleons are called isoters

Which of the following liquid metals has the highest thermal conductivity? (A) Molten sodium (B) Molten lead (C) Mercury (D) Molten potassium

Description : Which of the following liquid metals has the highest thermal conductivity? (A) Molten sodium (B) Molten lead (C) Mercury (D) Molten potassium

Last Answer : (A) Molten sodium

Bonds formed by the sharing of an electron pair between two atoms are known as - (1) Covalent bonds (2) Ionic bonds (3) Weak bonds (4) None of the above

Description : Bonds formed by the sharing of an electron pair between two atoms are known as - (1) Covalent bonds (2) Ionic bonds (3) Weak bonds (4) None of the above

Last Answer : (1) Covalent bonds Explanation: Bonds which are formed by the sharing of an electron pair between two atoms are known as covalent bonds.

Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not exceed 4 (C) Both the rolls run necessarily at the same speed (D) Reduction ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed

Pick out the wrong statement. (A) For the compressible cake, voidage & the specific resistance of the cake can be assumed to be constant (B) Cake resistance is independent of the pressure drop (C) Crushing of explosive materials are done by employing dry-grinding (D) Gyratory crusher is a coarse crusher

Description : Pick out the wrong statement. (A) For the compressible cake, voidage & the specific resistance of the cake can be assumed to be constant (B) Cake resistance is independent of the pressure ... Crushing of explosive materials are done by employing dry-grinding (D) Gyratory crusher is a coarse crusher

Last Answer : (B) Cake resistance is independent of the pressure drop