Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Pick out the wrong statement.
(A) Linear polymers are formed from bifunctional groups only and are
normally thermoplastic
(B) Cross-linked branched chain polymers are either elastometric or
thermosetting
(C) Branching in case of cross-linked polymers caused by small amount of
impurities in bifunctional monomer formulation reduces its solubility and
increases the softening point
(D) Dibasic acids reacts with dihydric alcohols to give polyesters using
addition polymerisation reaction
by

1 Answer

Answer :

D) Dibasic acids reacts with dihydric alcohols to give polyesters using
addition polymerisation reaction
by

Related questions

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Description : Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Last Answer : (B) Thermoplastic

Polyesters are manufactured by the Polycondensation reaction of (A) Dibasic acid with dihydric alcohol (B) A single monomer (C) Carboxylic acid with ethylene

Description : Polyesters are manufactured by the Polycondensation reaction of (A) Dibasic acid with dihydric alcohol (B) A single monomer (C) Carboxylic acid with ethylene

Last Answer : (A) Dibasic acid with dihydric alcohol

Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Last Answer : (B) Have three dimensional structure

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Description : Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Last Answer : (B) Thermosetting

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Description : Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Last Answer : C) Teflon is formed by step growth polymerisation

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Description : Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Last Answer : (C) Produces epoxy polymers

In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Last Answer : (A) Cross linked polystyrene

Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Description : Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Last Answer : (B) Uses either emulsion or suspension polymerisation methods

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength

Cellulose, the most important constituent of plant cell wall is made up of (a) branched chain of glucose molecules linked by β-1, 4 glycosidic bond in straight chain and α-1, 6 glycosidic bond at the site of branching (b) unbranched chain of glucose molecules linked by β-1, 4 glycosidic bond (c) branched chain of glucose molecules linked by α-1, 6 glycosidic bond at the site of branching (d) unbranched chain of glucose molecules linked by α-1, 4 glycosidic bond.

Description : Cellulose, the most important constituent of plant cell wall is made up of (a) branched chain of glucose molecules linked by β-1, 4 glycosidic bond in straight chain and α-1, 6 glycosidic bond ... the site of branching (d) unbranched chain of glucose molecules linked by α-1, 4 glycosidic bond.

Last Answer : (b) unbranched chain of glucose molecules linked by β-1, 4 glycosidic bond

Branched chain polymers compared to linear polymers have higher (A) Density (B) Tensile strength (C) Melting point (D) Degree of irregularity in atomic packing

Description : Branched chain polymers compared to linear polymers have higher (A) Density (B) Tensile strength (C) Melting point (D) Degree of irregularity in atomic packing

Last Answer : (D) Degree of irregularity in atomic packing

Neoprene is rendered non-inflammable, because of (A) Its cross-linked structure (B) Its linear chain structure (C) The presence of chlorine atoms in its monomer (D) The absence of chlorine atoms in its monomer

Description : Neoprene is rendered non-inflammable, because of (A) Its cross-linked structure (B) Its linear chain structure (C) The presence of chlorine atoms in its monomer (D) The absence of chlorine atoms in its monomer

Last Answer : (C) The presence of chlorine atoms in its monomer

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved

Description : In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved

Last Answer : (C) The monomers contain two functional groups

A modified amino acid solution with increased equimolar branched-chain amino acids and decreased aromatic amino acids has been proposed for patients with hepatic insufficiency. Which of the following statements is/are true? A. This formulation is proposed for the use of patients with fulminant hepatitis. B. Nitrogen balance is achieved in such patients with amounts of 40 gm. of amino acids per 24 hours. C. The use of 80 to 100 gm. of such solutions is associated with hepatic encephalopathy. D. In some studies of surgical patients, improvements in mortality have been reported.

Description : A modified amino acid solution with increased equimolar branched-chain amino acids and decreased aromatic amino acids has been proposed for patients with hepatic insufficiency. Which of the following ... D. In some studies of surgical patients, improvements in mortality have been reported.

Last Answer : Answer: D DISCUSSION: The use of modified amino acid solutions is based on the false neurotransmitter hypothesis of the cause of hepatic coma. According to this hypothesis, the imbalance ... in a group of patients with cirrhosis, decreasing morbidity and showing a trend toward decreased mortality

In 3rd generation dentin bonding agents, HEMA (Hydroxyethylmethacrylate) is 1. a hydrophilic monomer that wets the dentinal surface 2. a hydrophilic resin that forms a ”hybrid” layer by chemically reacting the intertubular dentin. 3. a hydrophilic monomer that alters collagen to promote cross linking of collagen to dentin. 4. a bifunctional molecule resin that copolymerizes to bis-GMA resins. a. 1,2 b. 1,4 c. 2,3 d. 1,3 e. 3,4

Description : In 3rd generation dentin bonding agents, HEMA (Hydroxyethylmethacrylate) is 1. a hydrophilic monomer that wets the dentinal surface 2. a hydrophilic resin that forms a hybrid layer by chemically reacting the intertubular dentin. 3. a hydrophilic ... a. 1,2 b. 1,4 c. 2,3 d. 1,3 e. 3,4

Last Answer : b. 1,4

. Polymers which soften on heating and harden when cooled are (a) Cross-linked polymers (b) Copolymers (c) Thermosetting polymers (d) Thermoplastics

Description : Polymers which soften on heating and harden when cooled are (a) Cross-linked polymers (b) Copolymers (c) Thermosetting polymers (d) Thermoplastics

Last Answer : Thermoplastics

Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Description : Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Last Answer : (A) Polymers made of only one monomer is called homopolyme

Differentiate between Thermoplastic and Thermosetting polymers.

Description : Differentiate between Thermoplastic and Thermosetting polymers.

Last Answer : Differentiate between Thermosetting and Thermoplastic polymers: Thermosetting Thermoplastic Polymers which once mould /shaped do not soften when heated and thus cannot be reshaped  Polymers whose ... tri, tetra or poly functional. Monomer used in this polymer bi functional.

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these

Description : Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these

Last Answer : (C) Lower density

Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble in common solvents (C) The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Description : Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble ... (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Last Answer : (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature

Which of the following natural bio polymers are formed as a result of polymerisation of amino-acids? (A) Starch (B) Cellulose (C) Proteins (D) Nucleic acids

Description : Which of the following natural bio polymers are formed as a result of polymerisation of amino-acids? (A) Starch (B) Cellulose (C) Proteins (D) Nucleic acids

Last Answer : (C) Proteins

Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon gases carburise the surface of steel at annealing temperatures (C) Active nitrogen (formed by cracking ammonia at the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Last Answer : (D) None of these

A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved in the manufacture of (A) Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Description : A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved ... Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Last Answer : (D) Urea-formaldehyde resins

Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Description : Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Last Answer : (A) Addition polymerisation product

Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Description : Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Last Answer : (A) Addition

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Last Answer : (B) Employs condensation polymerisation

Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ions and forms amino acids(B) Calcium present in the fertiliser helps in correcting the soil acidity(C) Particle size range of a good granular fertiliser is 10-15 mesh and itcontains less moisture as compared to finely divided powder form of fertiliser(D) Ammonium nitrate fertiliser is obtained as a by-product in an integratedsteel plant having by-product coke ovens

Description : Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ... nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Last Answer : (D) Ammonium nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

A copolymer is formed by the combination of two or more monomer molecules (A) In a chain without the elimination of water (B) With the elimination of small amount of water (C) Of the same monomer by elimination of small molecules of water (D) None of these

Description : A copolymer is formed by the combination of two or more monomer molecules (A) In a chain without the elimination of water (B) With the elimination of small amount of water (C) Of the same monomer by elimination of small molecules of water (D) None of these

Last Answer : (A) In a chain without the elimination of water

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Pick out the false statement pertaining to water treatment(A) Aeration of water is effective in CO2removal(B) The zeolite water softening process reduces the hardness of water by notmore than 50%(C) Sodium sulphate or sodium carbonate do not cause hardness in water(D) Water with pH value less than 7, is acidic.

Description : Pick out the false statement pertaining to water treatment. (A) Aeration of water is effective in CO2 removal (B) The zeolite water softening process reduces the hardness of water by not more than 50% (C ... carbonate do not cause hardness in water (D) Water with pH value less than 7, is acidic

Last Answer : (B) The zeolite water softening process reduces the hardness of water by not more than 50%

Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane number than straight chain paraffins with same number of carbon atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Description : Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane ... atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Last Answer : (A) Octane number of i-octane is zero

Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Description : Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Last Answer : (D) None of these

Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Description : Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on removal of hydrogen from it by cryogenic method (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification (D) Coal based fertiliser plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Description : Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on ... plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Last Answer : (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification

Pick out the wrong statement. (A) ****, *** & Vodka are prepared by the formulation of fruit juice, sugar beet & rye respectively (B) Protein catalysts are called enzymes (C) The rate of chemical reaction is independent of the concentration of reactants at high concentration of enzymes (D) Total sugar content in molasses is about 10%

Description : Pick out the wrong statement. (A) Wine, rum & Vodka are prepared by the formulation of fruit juice, sugar beet & rye respectively (B) Protein catalysts are called enzymes (C) The rate ... concentration of reactants at high concentration of enzymes (D) Total sugar content in molasses is about 10%

Last Answer : (D) Total sugar content in molasses is about 10%

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

Assertion (A): Dehydration of alcohols can be carried out with Conc `H_(2)SO_(4)` but not with conc HCl Reason (R): `H_(2)SO_(4)` is dibasic while HCl

Description : Assertion (A): Dehydration of alcohols can be carried out with Conc `H_(2)SO_(4)` but not with conc HCl Reason (R): `H_(2)SO_(4)` is dibasic while HCl

Last Answer : Assertion (A): Dehydration of alcohols can be carried out with Conc `H_(2)SO_(4)` but not with conc HCl ... R is false D. A is false but R is true

Thermosetting materials (A) Are cross-linked molecules (B) Soften on application of heat (C) Are solvent soluble (D) None of these

Description : Thermosetting materials (A) Are cross-linked molecules (B) Soften on application of heat (C) Are solvent soluble (D) None of these

Last Answer : (A) Are cross-linked molecules

Thermosetting materials (A) Are cross-linked molecules (B) Soften on application of heat (C) Are solvent soluble (D) None of these

Description : Thermosetting materials (A) Are cross-linked molecules (B) Soften on application of heat (C) Are solvent soluble (D) None of these

Last Answer : (A) Are cross-linked molecules