Which of the following metals is the most prone to work hardening? (A) Brass (B) Aluminium (C) Copper (D) Lead

Which of the following metals is the most prone to work hardening?
(A) Brass
(B) Aluminium
(C) Copper
(D) Lead
by

1 Answer

Answer :

Option A
by

Related questions

Age hardening is concerned with (A) Copper (B) Brass (C) Duralumin (D) Silver

Description : Age hardening is concerned with (A) Copper (B) Brass (C) Duralumin (D) Silver

Last Answer : (C) Duralumin

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Dip stick used for measuring the level of petro fuels (e.g. petrol, diesel, fuel oil etc.) in the storage tank is usually made of (A) Brass (B) Copper (C) High carbon steel (D) Aluminium

Description : Dip stick used for measuring the level of petro fuels (e.g. petrol, diesel, fuel oil etc.) in the storage tank is usually made of (A) Brass (B) Copper (C) High carbon steel (D) Aluminium

Last Answer : (A) Brass

Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Last Answer : Option A

Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Last Answer : Option A

Which of the following materials has the least scrap value? (A) Aluminium (B) Stainless steel (C) Brass (D) Copper

Description : Which of the following materials has the least scrap value? (A) Aluminium (B) Stainless steel (C) Brass (D) Copper

Last Answer : Option B

Which of the following materials has the maximum shrinkage allowance? (A) Brass (B) Cast iron (C) Lead (D) Aluminium alloy

Description : Which of the following materials has the maximum shrinkage allowance? (A) Brass (B) Cast iron (C) Lead (D) Aluminium alloy

Last Answer : Option C

For ammonia refrigerating systems, the tubes of a shell and tube condenser are made of (a) copper (b) aluminium (c) steel (d) brass

Description : For ammonia refrigerating systems, the tubes of a shell and tube condenser are made of (a) copper (b) aluminium (c) steel (d) brass

Last Answer : Ans: c

The pump is mostly made of: e) Aluminium c) Brass f) Copper d) Plastic

Description : The pump is mostly made of: e) Aluminium c) Brass f) Copper d) Plastic

Last Answer :  Aluminium

The pump is mostly made of: A. Aluminium B. Copper C. Brass D. Plastic

Description : The pump is mostly made of: A. Aluminium B. Copper C. Brass D. Plastic

Last Answer : Aluminium 

The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Description : The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Last Answer : (b) steel

The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Description : The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Last Answer : (b) steel

Brass is an alloy of (A) copper and zinc. (B) copper and iron. (C) copper and Aluminium. (D) copper and tin.

Description : Brass is an alloy of (A) copper and zinc. (B) copper and iron. (C) copper and Aluminium. (D) copper and tin.

Last Answer : (A) copper and zinc.

Which of the following is prone to cup and cone fracture? (A) Cast iron (B) Soft brass (C) Round specimen of ductile metal (D) Flat tensile specimen of ductile metal

Description : Which of the following is prone to cup and cone fracture? (A) Cast iron (B) Soft brass (C) Round specimen of ductile metal (D) Flat tensile specimen of ductile metal

Last Answer : Option C

Which of the following commercial metals is most abundantly found in India? (A) Copper (B) Aluminium (C) Nickel (D) Zinc

Description : Which of the following commercial metals is most abundantly found in India? (A) Copper (B) Aluminium (C) Nickel (D) Zinc

Last Answer : (B) Aluminium

Which of the following metals is not subjected to electrolytic refining/purification? (A) Copper (B) Zinc (C) Tin (D) Aluminium

Description : Which of the following metals is not subjected to electrolytic refining/purification? (A) Copper (B) Zinc (C) Tin (D) Aluminium

Last Answer : (C) Tin

Which of the following metals in not used for coating of the base metal to guard it against corrosion? (A) Lead (B) Cadmium (C) Magnesium (D) Aluminium

Description : Which of the following metals in not used for coating of the base metal to guard it against corrosion? (A) Lead (B) Cadmium (C) Magnesium (D) Aluminium

Last Answer : (C) Magnesium

There are thirteen metals which are treated as pollutants. Which of the following metals is not a pollutant? (A) Mercury (B) Arsenic (C) Aluminium (D) Lead

Description : There are thirteen metals which are treated as pollutants. Which of the following metals is not a pollutant? (A) Mercury (B) Arsenic (C) Aluminium (D) Lead

Last Answer : (C) Aluminium

Containers for carrying strong acids are made of (a) platinum (b) brass (c) copper (d) lead

Description : Containers for carrying strong acids are made of (a) platinum (b) brass (c) copper (d) lead

Last Answer : Ans:(d)

Brass is made of – (1) copper and tin (2) tin and lead (3) copper and zinc (4) copper, tin and zinc

Description : Brass is made of – (1) copper and tin (2) tin and lead (3) copper and zinc (4) copper, tin and zinc

Last Answer : (3) copper and zinc Explanation: Brass is an alloy of copper and zinc; the proportions of zinc and copper can be varied to create a range of brasses with varying properties. By Comparison, bronze is principally an alloy of copper and tin.

Brass is an alloy of - (1) Lead and tin (2) Zine and copper (3) Antimony, tin and lead (4) Zinc, tin and copper

Description : Brass is an alloy of - (1) Lead and tin (2) Zine and copper (3) Antimony, tin and lead (4) Zinc, tin and copper

Last Answer : (2) Zine and copper Explanation: Brass is an alloy of copper and zinc; the proportions of zinc and copper can be varied to create a range of brasses with varying properties. By comparison ... , including alloys with arsenic, phosphorus, aluminium, manganese, and silicon, are commonly termed "brome".

German silver is an alloy of (A) Zinc, lead and nickel (B) Silver, gold and lead (C) Copper, nickel and zinc (D) Copper, brass and zinc

Description : German silver is an alloy of (A) Zinc, lead and nickel (B) Silver, gold and lead (C) Copper, nickel and zinc (D) Copper, brass and zinc

Last Answer : Answer: Option C

Brass is an alloy of (A) Copper and zinc (B) Zinc and lead (C) Tin and silver (D) Zinc and nickel

Description : Brass is an alloy of (A) Copper and zinc (B) Zinc and lead (C) Tin and silver (D) Zinc and nickel

Last Answer : Answer: Option A

Brass is made of (1) copper and tin (2) tin and lead (3) copper and zinc (4) copper, tin and zinc

Description : Brass is made of (1) copper and tin (2) tin and lead (3) copper and zinc (4) copper, tin and zinc

Last Answer : copper and zinc

Brass is an alloy of (1) Lead and tin (2) Zinc and copper (3) Antimony, tin and lead (4) Zinc, tin and copper

Description : Brass is an alloy of (1) Lead and tin (2) Zinc and copper (3) Antimony, tin and lead (4) Zinc, tin and copper

Last Answer : Zinc and copper

Which one of the following metals occurs in nature in free state? (1) Gold (2) Sodium (3) Aluminium (4) Copper

Description : Which one of the following metals occurs in nature in free state? (1) Gold (2) Sodium (3) Aluminium (4) Copper

Last Answer : (1) Gold Explanation: Gold is found on every continent on Earth, except Antarctica. The largest amounts of gold on Earth are found in the oceans - but it is not yet feasible to extract gold from seawater.

Which °fine metals has the maximum thermal conductivity? (1) Iron (2) Aluminium (3) Silver (4) Copper

Description : Which °fine metals has the maximum thermal conductivity? (1) Iron (2) Aluminium (3) Silver (4) Copper

Last Answer : (3) Silver Explanation: Silver has the best thermal conductivity of 429 W/mK at RT (295K). It is followed by copper, gold and aluminium. Metals generally have very good electrical conductivity, that leads to high thermal conductivity.

Rohan had learnt that non-metals on beating with hammer are generally broken into pieces. Which of the following is a non-metal? a) iron nail b)aluminium wire c)copper wire d)piece of coal

Description : Rohan had learnt that non-metals on beating with hammer are generally broken into pieces. Which of the following is a non-metal? a) iron nail b)aluminium wire c)copper wire d)piece of coal

Last Answer : d)piece of coal

Which of the metals has the maximum thermal conductivity? (1) Iron (2) Aluminium (3) Silver (4) Copper

Description : Which of the metals has the maximum thermal conductivity? (1) Iron (2) Aluminium (3) Silver (4) Copper

Last Answer : Silver

Exposure to SO2 containing chimney gases results in the (A) Reduction in strength of leather & cloth (B) Acceleration of corrosion rates of metals (C) Increased drying & hardening time of paints (D) All (A), (B) and (C)

Description : Exposure to SO2 containing chimney gases results in the (A) Reduction in strength of leather & cloth (B) Acceleration of corrosion rates of metals (C) Increased drying & hardening time of paints (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Strain hardening effect in metals subjected to cold working is due to the __________ mechanism. (A) Slip (B) Fracture (C) Winning (D) Dislocation

Description : Strain hardening effect in metals subjected to cold working is due to the __________ mechanism. (A) Slip (B) Fracture (C) Winning (D) Dislocation

Last Answer : (D) Dislocation

Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Description : Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Last Answer : Option C

Babbitt metal used for bearings is a _________base alloy. (A) Tin (B) Lead (C) Aluminium (D) Copper

Description : Babbitt metal used for bearings is a _________base alloy. (A) Tin (B) Lead (C) Aluminium (D) Copper

Last Answer : (A) Tin

The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Description : The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Last Answer : (A) Lead

Babbitt metal (used for making bearings) comprises of (A) Mainly tin (85%) and lead (B) Saw dust and iron dust mixture (C) Zinc and aluminium (D) Copper and aluminium

Description : Babbitt metal (used for making bearings) comprises of (A) Mainly tin (85%) and lead (B) Saw dust and iron dust mixture (C) Zinc and aluminium (D) Copper and aluminium

Last Answer : (A) Mainly tin (85%) and lead

Constantan used in thermocouples is an alloy of (A) Iron & copper (B) Copper & aluminium (C) Lead & tin (D) None of these

Description : Constantan used in thermocouples is an alloy of (A) Iron & copper (B) Copper & aluminium (C) Lead & tin (D) None of these

Last Answer : (D) None of these

Out of the following, the most malleable material is (A) Copper (B) Aluminium (C) Wrought iron (D) Lead

Description : Out of the following, the most malleable material is (A) Copper (B) Aluminium (C) Wrought iron (D) Lead

Last Answer : (D) Lead

Matte smelting is used in the extraction of (A) Lead (B) Zinc (C) Aluminium (D) Copper

Description : Matte smelting is used in the extraction of (A) Lead (B) Zinc (C) Aluminium (D) Copper

Last Answer : Option D

The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Description : The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Last Answer : Option A

Which of the following metals does NOT react with oxygen even at a high temperature? (1) Aluminium (2) Silver (3) Lead (4) line

Description : Which of the following metals does NOT react with oxygen even at a high temperature? (1) Aluminium (2) Silver (3) Lead (4) line

Last Answer : (2) Silver Explanation: Silver and gold do not react with oxygen even at high temperatures as they are less reactive and are placed below the reactivity series.

The metals with very low melting points which melts by the temperature of palm are A) Sodium and potassium B) Lead and magnesium C) Aluminium and zinc D) Gallium and caesium

Description : The metals with very low melting points which melts by the temperature of palm are A) Sodium and potassium B) Lead and magnesium C) Aluminium and zinc D) Gallium and caesium

Last Answer : D) Gallium and caesium

Nickel (76%) and chromium (15%) alloys are termed as (A) Inconel (B) Monel (C) Aluminium bronzes (D) Brass

Description : Nickel (76%) and chromium (15%) alloys are termed as (A) Inconel (B) Monel (C) Aluminium bronzes (D) Brass

Last Answer : (A) Inconel

The high expansion metal normally used in the bimetallic thermometer is __________ temperature measurement. (A) Brass for low (B) Nickel alloys for high (C) Both 'a' & 'b' (D) Aluminium for all

Description : The high expansion metal normally used in the bimetallic thermometer is __________ temperature measurement. (A) Brass for low (B) Nickel alloys for high (C) Both 'a' & 'b' (D) Aluminium for all

Last Answer : (C) Both 'a' & 'b'

Condenser tubes are not made of (A) Cartridge brass (B) Muntz brass (C) Wood metal (D) Aluminium brass alloy

Description : Condenser tubes are not made of (A) Cartridge brass (B) Muntz brass (C) Wood metal (D) Aluminium brass alloy

Last Answer : (C) Wood metal

Which of the following commonly used condenser tube materials has the lowest thermal conductivity? (A) Admiralty brass (B) Stainless steel (C) Aluminium brass (D) Titanium

Description : Which of the following commonly used condenser tube materials has the lowest thermal conductivity? (A) Admiralty brass (B) Stainless steel (C) Aluminium brass (D) Titanium

Last Answer : (B) Stainless steel

Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Last Answer : (A) Aluminium

Age hardening' of duralumin is due to (A) Copper (B) Magnesium (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Age hardening' of duralumin is due to (A) Copper (B) Magnesium (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The metal used for making air crafts and rockets is – (1) Lead (2) Aluminium (3) Nickel (4) Copper

Description : The metal used for making air crafts and rockets is – (1) Lead (2) Aluminium (3) Nickel (4) Copper

Last Answer : (3) Nickel Explanation: Nickel-based super alloys are an unusual class of metallic materials with an exceptional combination of high temperature strength, toughness, and resistance to degradation in ... These materials are widely used in aircraft and power-generation turbines, rocket engines, etc.

A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Last Answer : (2) an alloy of tin and lead Explanation: Electric fuse wire is an alloy made of tin (63 % lead 37 %. The cross sectional area determines the melting point at a certain current. Alloys (e.g. ... resulting combination of good conductivity (due to the tin) with a low melting point due to the lead).

The metal whose electrical conductivity is more, is – (1) copper (2) aluminium (3) silver (4) lead

Description : The metal whose electrical conductivity is more, is – (1) copper (2) aluminium (3) silver (4) lead

Last Answer : (3) silver Explanation: Copper ; 9% less conductive than silver: aluminium is 1 0% less conductive than copper; while steel is the least conductive among the given options. The most electrically conductive metal is silver.