Exposure to SO2 containing chimney gases results in the (A) Reduction in strength of leather & cloth (B) Acceleration of corrosion rates of metals (C) Increased drying & hardening time of paints (D) All (A), (B) and (C)

Exposure to SO2 containing chimney gases results in the
(A) Reduction in strength of leather & cloth
(B) Acceleration of corrosion rates of metals
(C) Increased drying & hardening time of paints
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

Sulphur dioxide present in the industrial chimney exhaust gases causes (A) Respiratory & lung disease (B) Reduction in plant's productivity owing to acid rain (C) Corrosion of building materials (D) All (A), (B) and (C)

Description : Sulphur dioxide present in the industrial chimney exhaust gases causes (A) Respiratory & lung disease (B) Reduction in plant's productivity owing to acid rain (C) Corrosion of building materials (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

__________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning

Description : __________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning

Last Answer : (C) Strain ageing

Moist atmospheric air at high temperature (e.g., in summer) having high concentration of sulphur dioxide causes(A) Fading of dyes on textiles(B) Corrosion, tarnishing & soiling of metals(C) Reduced strength of textiles(D) All (A), (B) and (C)

Description : Moist atmospheric air at high temperature (e.g., in summer) having high concentration of sulphur dioxide causes (A) Fading of dyes on textiles (B) Corrosion, tarnishing & soiling of metals (C) Reduced strength of textiles (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

. Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Description : . Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Last Answer : (C) Give elasticity & prevent cracking of the film

How can wet carbon dioxide be responsible for a corrosion problem in iron-containing metals? How can wet carbon dioxide be responsible for a corrosion problem in iron-containing metals?

Description : How can wet carbon dioxide be responsible for a corrosion problem in iron-containing metals?

Last Answer : Carbon dioxide reacts with water according to the following equation: CO2 + H2O -> HCO3- + H+ As the concentration of CO2 increases, so does the concentration of the H+ ion. This ion ... ions produced can react with the bicarbonate ions to form ferrous carbonate, which precipitates as a scale.

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

Lung cancer & DNA breakage are the major ill effects of excessive ozone exposure to human beings. Ozone layer depletion in the atmosphere is mainly caused by the presence of (A) CO2 (B) SO2 (C) Hydrocarbons (D) CFC (chloro fluoro carbon)

Description : Lung cancer & DNA breakage are the major ill effects of excessive ozone exposure to human beings. Ozone layer depletion in the atmosphere is mainly caused by the presence of (A) CO2 (B) SO2 (C) Hydrocarbons (D) CFC (chloro fluoro carbon)

Last Answer : (D) CFC (chloro fluoro carbon)

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points

Drying of a wet solid under constant drying conditions means the exposure of the wet solid to the air of constant (A) Humidity (B) Velocity (C) Temperature (D) All (A), (B) & (C)

Description : Drying of a wet solid under constant drying conditions means the exposure of the wet solid to the air of constant (A) Humidity (B) Velocity (C) Temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Lead is (A) Not resistant to corrosion (B) Used as a cathodic material (C) Not used as pigment (in its compound forms) for paints (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

Description : Lead is (A) Not resistant to corrosion (B) Used as a cathodic material (C) Not used as pigment (in its compound forms) for paints (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

Last Answer : (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Description : High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Last Answer : (d) All the above

Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Description : Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Last Answer : Option C

The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Description : The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Last Answer : Answer: Option C

Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate. (A) Increases (B) Decreases (C) Does not affect

Description : Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate. (A) Increases (B) Decreases (C) Does not affect

Last Answer : (B) Decreases

A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Description : A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Last Answer : (D) Temperature of the solid

The commonly used drying oil for oil paints, is (A) Olive oil (B) Linseed oil (C) Kerosene oil (D) Acetate of lead

Description : The commonly used drying oil for oil paints, is (A) Olive oil (B) Linseed oil (C) Kerosene oil (D) Acetate of lead

Last Answer : Answer: Option D

Corrosion in Steel girder bridges may be prevented by : a) Protective coatings by painting b) Metallising c) Use of epoxy based paints d) All the above*

Description : Corrosion in Steel girder bridges may be prevented by : a) Protective coatings by painting b) Metallising c) Use of epoxy based paints d) All the above*

Last Answer : d) All the above*

Rexine (also called artificial leather), which is used for making table cover, automobile seat cover, shoes etc. is made by coating thick cloth with molten (A) Teflon (B) Bakelite (C) SBR (D) PVC

Description : Rexine (also called artificial leather), which is used for making table cover, automobile seat cover, shoes etc. is made by coating thick cloth with molten (A) Teflon (B) Bakelite (C) SBR (D) PVC

Last Answer : (D) PVC

Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) Is much cheaper than the cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Description : Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) ... cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

High copper amalgam lasts longer than low copper amalgam because of:** A. Increased compressive strength B. Increased corrosion resistance C. High creep D. Increased tensile strength E. Decreased setting expansion

Description : High copper amalgam lasts longer than low copper amalgam because of:**  A. Increased compressive strength  B. Increased corrosion resistance  C. High creep  D. Increased tensile strength  E. Decreased setting expansion 

Last Answer : A. Increased compressive strength 

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to SO3 can be increased by (A) Increasing the oxygen concentration (B) Putting more quantity of V2O5 catalyst in the converter (C) Removing some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Description : In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to ... some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Last Answer : (C) Removing some quantity of SO3 during intermediate stage

What is the best way to clean the cloth part of a cloth and leather handbag?

Description : What is the best way to clean the cloth part of a cloth and leather handbag?

Last Answer : Tide to go

Which looks classifer for an executive desk chair, leather or cloth?

Description : Which looks classifer for an executive desk chair, leather or cloth?

Last Answer : When choosing an executive desk chair I would go with leather. Not only will leather look better it is very durable and easy to keep clean.

What are the benefits of leather furniture versus cloth?

Description : What are the benefits of leather furniture versus cloth?

Last Answer : Leather, properly cared for, will last years and years. Choose a style that suits you, because you won't have need to replace it soon. It's also easier to clean. Small spills or smears wipe right off, much easier than shampooing.

What are the benefits of leather seat covers versus cloth?

Description : What are the benefits of leather seat covers versus cloth?

Last Answer : Leather seat covers will feel better and have a better look, but can also be freezing cold in the winter and blazing hot in the summer. I

Are leather seat covers more durable then cloth?

Description : Are leather seat covers more durable then cloth?

Last Answer : Not always, leather is easily ripped by sharp objects, while fabric is easily stained.

Is it better to have a cloth or leather office chair?

Description : Is it better to have a cloth or leather office chair?

Last Answer : A leather office chair will be easier to clean and wont stain.

The binding of acquittance rolls in respects of staff, for whom establishment returns are sent to the Postal account office and for whom service books of service rolls are maintained need not be in leather but in cloth as there are to be preserved for a) 5 Year b) 6 year c) 7 year d) 2 year

Description : The binding of acquittance rolls in respects of staff, for whom establishment returns are sent to the Postal account office and for whom service books of service rolls are maintained need not be in leather but in cloth as there are to be preserved for a) 5 Year b) 6 year c) 7 year d) 2 year

Last Answer : b) 6 year

Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

Exposure to small amount of __________ results in high blood pressure & heart disease in human beings. (A) Hydrogen sulphide (B) Mercury (C) Cadmium (D) Asbestos

Description : Exposure to small amount of __________ results in high blood pressure & heart disease in human beings. (A) Hydrogen sulphide (B) Mercury (C) Cadmium (D) Asbestos

Last Answer : (C) Cadmium

Strain hardening effect in metals subjected to cold working is due to the __________ mechanism. (A) Slip (B) Fracture (C) Winning (D) Dislocation

Description : Strain hardening effect in metals subjected to cold working is due to the __________ mechanism. (A) Slip (B) Fracture (C) Winning (D) Dislocation

Last Answer : (D) Dislocation

Which of the following metals is the most prone to work hardening? (A) Brass (B) Aluminium (C) Copper (D) Lead

Description : Which of the following metals is the most prone to work hardening? (A) Brass (B) Aluminium (C) Copper (D) Lead

Last Answer : Option A

If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 (as per Le Chatelier's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Description : If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 ( ... 's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Last Answer : (A) Decreases

Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)

Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability to be cast, rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Last Answer : (A) High strength to weight ratio

Wrought iron does not have (A) Uniform strength in all directions (B) Ability to hold protective coating (C) High ductility & corrosion resistance (D) Easily weldable characteristics

Description : Wrought iron does not have (A) Uniform strength in all directions (B) Ability to hold protective coating (C) High ductility & corrosion resistance (D) Easily weldable characteristics

Last Answer : Option A

Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Description : Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Last Answer : Option C

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Yield of urea can be increased with excess ammonia and higher pressure & temperature, but because of __________ this is normally not done. (A) Increased biuret formation (B) High corrosion rate (C) Increased cost of equipment (D) All (A), (B) & (C)

Description : Yield of urea can be increased with excess ammonia and higher pressure & temperature, but because of __________ this is normally not done. (A) Increased biuret formation (B) High corrosion rate (C) Increased cost of equipment (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

__________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Last Answer : (D) Calorising

Answer: b Metabolic response to injury results in increased energy expenditure. If energy intake is less than expenditure, oxidation of body fat stores and erosion of lean body mass will occur with resultant loss of weight. When weight loss exceeds 10–15% of body weight, the complications of malnutrition interact with disease processes, with increased morbidity and mortality rates. The goal of nutritional support is maintenance of body cell mass and limitation of weight loss to less than 10% preinjury. The major impact of nutritional support in the trauma patient is to aid host defense. Under-nutrition may compromise the available host defense mechanism and may thus increase the likelihood of invasive sepsis, multiple organ system failure, and death. Resuscitation, oxygenation and arrest

Description : Answer: b Metabolic response to injury results in increased energy expenditure. If energy intake is less than expenditure, oxidation of body fat stores and erosion of lean body mass will occur ... requirements, caloric requirements should be distributed at a ratio of 70% as glucose and 30% as fat

Last Answer : Which of the following statement(s) is/are true concerning body fuel reserves? a. The largest fuel reserve in the body is skeletal muscle b. Fat provides about 9 calories/gram c. Free glucose and glycogen stores are a trivial fuel reserve d. Body protein is a valuable storage form of energy

Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration of A (B) Transition state theory approaches the problem of calculating reaction rates by concentrating on the idea of activated complexes (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases (D) If the rate of an irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Description : Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration ... irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Last Answer : (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases

Presence of SO2 in furnace gases attacks the ferrous metal by way of (A) Accelerating the rate of scaling (B) Causing metal embrittlement (C) Attacking the grain boundaries; particularly severe on low carbon and nickel bearing steels at high temperature (D) All (A), (B) and (C)

Description : Presence of SO2 in furnace gases attacks the ferrous metal by way of (A) Accelerating the rate of scaling (B) Causing metal embrittlement (C) Attacking the grain boundaries; particularly severe on low carbon and nickel bearing steels at high temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Cold working of a material results in increase in hardness, which is termed as the __________ hardening. (A) Cold (B) Work (C) Age (D) Induction

Description : Cold working of a material results in increase in hardness, which is termed as the __________ hardening. (A) Cold (B) Work (C) Age (D) Induction

Last Answer : (B) Work