Which of the following materials has the least scrap value? (A) Aluminium (B) Stainless steel (C) Brass (D) Copper

Which of the following materials has the least scrap value?
(A) Aluminium
(B) Stainless steel
(C) Brass
(D) Copper
by

1 Answer

Answer :

Option B
by

Related questions

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Which of the following commonly used condenser tube materials has the lowest thermal conductivity? (A) Admiralty brass (B) Stainless steel (C) Aluminium brass (D) Titanium

Description : Which of the following commonly used condenser tube materials has the lowest thermal conductivity? (A) Admiralty brass (B) Stainless steel (C) Aluminium brass (D) Titanium

Last Answer : (B) Stainless steel

Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Last Answer : (B) Copper

Dip stick used for measuring the level of petro fuels (e.g. petrol, diesel, fuel oil etc.) in the storage tank is usually made of (A) Brass (B) Copper (C) High carbon steel (D) Aluminium

Description : Dip stick used for measuring the level of petro fuels (e.g. petrol, diesel, fuel oil etc.) in the storage tank is usually made of (A) Brass (B) Copper (C) High carbon steel (D) Aluminium

Last Answer : (A) Brass

Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Last Answer : Option A

Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Last Answer : Option A

Which of the following materials has the poorest electrical conductivity? (A) Carbon (B) Aluminium (C) Silver (D) Stainless steel

Description : Which of the following materials has the poorest electrical conductivity? (A) Carbon (B) Aluminium (C) Silver (D) Stainless steel

Last Answer : (A) Carbon

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Last Answer : (A) Chromium and nickel

Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Description : Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Last Answer : (B) Stainless steel

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Last Answer : Option C

Identical objects of four different materials are heated to the same high temperature. Which of the following would least likely burn your hand if touched?  a. aluminium  b. brass  c. glass  d. concrete

Description : Identical objects of four different materials are heated to the same high temperature. Which of the following would least likely burn your hand if touched?  a. aluminium  b. brass  c. glass  d. concrete

Last Answer : glass

For ammonia refrigerating systems, the tubes of a shell and tube condenser are made of (a) copper (b) aluminium (c) steel (d) brass

Description : For ammonia refrigerating systems, the tubes of a shell and tube condenser are made of (a) copper (b) aluminium (c) steel (d) brass

Last Answer : Ans: c

The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Description : The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Last Answer : (b) steel

The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Description : The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Last Answer : (b) steel

Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium

Description : Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium

Last Answer : Ans:(b)

Which metal is added to steel to make it stainless steel? A. Chromium (Answer) B. Aluminium C. Carbon D. Copper

Description : Which metal is added to steel to make it stainless steel? A. Chromium (Answer) B. Aluminium C. Carbon D. Copper

Last Answer : A. Chromium (Answer)

Of the following commonly used materials, the one that is not an alloy is - (1) Steel (2) Brass (3) Bronze (4) Copper

Description : Of the following commonly used materials, the one that is not an alloy is - (1) Steel (2) Brass (3) Bronze (4) Copper

Last Answer : (4) Copper Explanation: Copper is not an alloy; it is a soft, malleable, and ductile metal with very high thermal and electrical conductivity. It is used as a constituent of various ... marine hardware and coins, and constant an used in strain gauges and thermocouples for temperature measurement.

Of the following commonly used materials, the one that is not an alloy is (1) Steel (2) Brass (3) Bronze (4) Copper

Description : Of the following commonly used materials, the one that is not an alloy is (1) Steel (2) Brass (3) Bronze (4) Copper

Last Answer : Copper

Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Description : Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Last Answer : (C) Stainless steel-glass lined

Which of the following materials has the maximum shrinkage allowance? (A) Brass (B) Cast iron (C) Lead (D) Aluminium alloy

Description : Which of the following materials has the maximum shrinkage allowance? (A) Brass (B) Cast iron (C) Lead (D) Aluminium alloy

Last Answer : Option C

Which of the following metals is the most prone to work hardening? (A) Brass (B) Aluminium (C) Copper (D) Lead

Description : Which of the following metals is the most prone to work hardening? (A) Brass (B) Aluminium (C) Copper (D) Lead

Last Answer : Option A

Beams of hyperbolic cooling towers are made up of a) Tungsten b) Iron c) Stainless steel d) Brass

Description : Beams of hyperbolic cooling towers are made up of a) Tungsten b) Iron c) Stainless steel d) Brass

Last Answer : c) Stainless steel

________ is an alloy made from iron , chromium and nickel . a) stainless steel b)steel c)brass d)bronze

Description : ________ is an alloy made from iron , chromium and nickel . a) stainless steel b)steel c)brass d)bronze

Last Answer : a) stainless steel

Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Last Answer : (A) Aluminium

Which of the following materials is not used for transmission and distribution of electrical power ? (a) Copper (b) Aluminium (c) Steel (d) Tungsten

Description : Which of the following materials is not used for transmission and distribution of electrical power ? (a) Copper (b) Aluminium (c) Steel (d) Tungsten

Last Answer : (d) Tungsten

Which of the following materials is used for overhead transmission lines ? (a) Steel cored aluminium (b) Galvanised steel (c) Cadmium copper (d) Any of the above

Description : Which of the following materials is used for overhead transmission lines ? (a) Steel cored aluminium (b) Galvanised steel (c) Cadmium copper (d) Any of the above

Last Answer : (d) Any of the above

Which of the following materials is not used for transmission and distribution of electrical power ? (a) Copper (b) Aluminium (c) Steel (d) Tungsten

Description : Which of the following materials is not used for transmission and distribution of electrical power ? (a) Copper (b) Aluminium (c) Steel (d) Tungsten

Last Answer : (d) Tungsten

Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron

Description : Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron

Last Answer : (d) Cast-iron

The pump is mostly made of: e) Aluminium c) Brass f) Copper d) Plastic

Description : The pump is mostly made of: e) Aluminium c) Brass f) Copper d) Plastic

Last Answer :  Aluminium

The pump is mostly made of: A. Aluminium B. Copper C. Brass D. Plastic

Description : The pump is mostly made of: A. Aluminium B. Copper C. Brass D. Plastic

Last Answer : Aluminium 

Brass is an alloy of (A) copper and zinc. (B) copper and iron. (C) copper and Aluminium. (D) copper and tin.

Description : Brass is an alloy of (A) copper and zinc. (B) copper and iron. (C) copper and Aluminium. (D) copper and tin.

Last Answer : (A) copper and zinc.

Which of the following has the highest density and the lowest melting point? (A) Stainless steel (B) Titanium (C) Lead (D) Aluminium

Description : Which of the following has the highest density and the lowest melting point? (A) Stainless steel (B) Titanium (C) Lead (D) Aluminium

Last Answer : (C) Lead

The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Last Answer : (B) Lead

Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Last Answer : (A) PTFE and porcelain

100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Last Answer : (C) Aluminium, tin and rubber

Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron

Description : Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron

Last Answer : (B) Stainless steel

For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Last Answer : (B) Cast iron

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Anodic material used for the cathodic protection of underground buried steel pipeline is (A) Nickel or copper (B) Zinc or magnesium (C) Bronze (D) Brass

Description : Anodic material used for the cathodic protection of underground buried steel pipeline is (A) Nickel or copper (B) Zinc or magnesium (C) Bronze (D) Brass

Last Answer : (B) Zinc or magnesium

A highly elastic material is deformed least on loading and retains its original form on removal of the load. Which of the following is the most elastic material? (A) Steel (B) Glass (C) Rubber (D) Brass

Description : A highly elastic material is deformed least on loading and retains its original form on removal of the load. Which of the following is the most elastic material? (A) Steel (B) Glass (C) Rubber (D) Brass

Last Answer : Option A

The important metal used with iron to produce stainless steel is (1) Aluminium (2) Chromium (3) Tin (4) Carbon

Description : The important metal used with iron to produce stainless steel is (1) Aluminium (2) Chromium (3) Tin (4) Carbon 

Last Answer : Chromium

Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Description : Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Last Answer : (C) Stainless steel

Which of the following is a low melting point metal? (A) Stainless steel (B) Wrought iron (C) Tin (D) Copper

Description : Which of the following is a low melting point metal? (A) Stainless steel (B) Wrought iron (C) Tin (D) Copper

Last Answer : (C) Tin

The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel(B) Mild steel(C) High silicon iron (14% Si)(D) Copper

Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper

Last Answer : (A) Molybdenum stainless steel

Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)

Description : Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)

Last Answer : (C) Reinforced concrete lined with lead

Heat exchanger tubes are never made of (A) Plain carbon steel (B) Stainless steel (C) Lead (D) Copper

Description : Heat exchanger tubes are never made of (A) Plain carbon steel (B) Stainless steel (C) Lead (D) Copper

Last Answer : (C) Lead

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper

Description : Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper

Last Answer : (B) Plain carbon steel