Description : Hollow shafts can be made as strong as solid shafts by making the twisting moments of both the shafts same. Shafts made by __________ have residual stresses. (A) Forging (B) Cold rolling (C) Hot rolling (D) Casting
Last Answer : (B) Cold rolling
Description : Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its ... (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature
Last Answer : (C) Cold working of a metal decreases its fatigue strength
Description : A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting
Last Answer : (C) Investment casting
Description : Among casting, forging and forging which has the slowest rate of production? a) Casting b) Forging c) Machining d) All have equal rate of production
Last Answer : c) Machining
Description : Which process allows controlling grain structure of the product? a) Casting b) Forging c) None of the mentioned d) Die Casting
Last Answer : b) Forging
Description : Pick up the correct statement from the following: (A) Air bubbles in casting produce a dull sound by tapping their surfaces lightly with a hammer (B) Cupola furnace is used for the manufacture of cast iron (C) Red short iron is of no value for welding purpose (D) All the above
Last Answer : Answer: Option D
Description : Steel pipes are normally manufactured by __________ process. (A) Extrusion (B) Cold working (C) Forging (D) Electroforming
Last Answer : (A) Extrusion
Description : Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing
Last Answer : (A) Welding
Description : Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting
Last Answer : options A
Last Answer : Option C
Description : Oxygen cylinders used for autogenous (cutting/welding) purposes are (A) Seamless & made of steel (B) Heat treated before use (C) Made by sand casting (D) Welded steel cylinders
Last Answer : Option A
Description : Steel balls are manufactured by (A) Sintering (B) Casting (C) Cold heading (D) Spinning
Last Answer : (C) Cold heading
Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron
Last Answer : (A) Wrought iron
Description : Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron
Last Answer : (C) Wrought iron
Description : Valves in pipe size of 2" and under are normally made of (A) Wrought iron (B) Brass (C) Bronze (D) Monel
Last Answer : (B) Brass
Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron
Last Answer : (B) Pig iron
Description : Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel
Description : Which of the following has the poorest weldability? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) High-carbon steel
Last Answer : (D) High-carbon steel
Description : Which of the following is the easiest to bend? (A) Steel (B) Stainless steel (C) Cast iron (D) Wrought iron
Last Answer : (D) Wrought iron
Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron
Last Answer : (B) Stainless steel
Description : Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel
Last Answer : (D) High carbon steel
Description : The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron
Last Answer : (A) Lead
Description : Wrought iron is (A) High carbon iron (B) Highly resistance to acid corrosion (C) Malleable & ductile; and hence is used for chain links, hooks & couplings (D) An alloy of iron, chromium & carbon
Last Answer : (C) Malleable & ductile; and hence is used for chain links, hooks & couplings
Description : An alloy of iron containing 4% carbon is called (A) High carbon steel (B) Wrought iron (C) Mild steel (D) None of these
Last Answer : (D) None of these
Description : Which of the following is a low melting point metal? (A) Stainless steel (B) Wrought iron (C) Tin (D) Copper
Last Answer : (C) Tin
Description : Which has the maximum melting point out of the following? (A) Steel (B) Cast iron (C) Stainless steel (D) Wrought iron
Description : Which is the purest form of iron? (A) Wrought iron (B) Pig iron (C) Bessemer iron (D) Grey iron
Description : __________ iron is produced, when molten pig iron is chilled suddenly. (A) White cast (B) Grey cast (C) Wrought (D) None of these
Last Answer : (A) White cast
Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron
Last Answer : (B) Stainless steel or glass lined vessel
Description : Iron alloyed with carbon upto 2% is called (A) Pig iron (B) Wrought iron (C) High carbon steel (D) None of these
Description : Which of the following undergoes granular fracture? (A) Wrought iron (B) Steel (C) Cast iron (D) None of these
Last Answer : (B) Steel
Description : Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel
Last Answer : (B) Cast iron
Description : Wrought iron is a suitable material of construction for handling __________ solutions (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these
Last Answer : (C) Alkalis & alkaline
Description : Wrought iron is a suitable material of construction for handling __________ solutions. (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these
Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C
Last Answer : (C) Cast iron
Description : Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment
Last Answer : (C) Corrosion resistance
Description : Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes
Last Answer : (B) Wrought iron cannot be easily forged and welded
Description : __________ iron is produced, when molten pig iron is allowed to cool gradually. (A) White cast (B) Grey cast (C) Wrought (D) None of these
Last Answer : (B) Grey cast
Description : Which of the following will have the highest melting point? (A) Pig iron (B) Mild steel (C) Wrought iron (D) High carbon stee
Description : __________ iron is the purest form of iron. (A) Cast (B) Wrought (C) Pig (D) High silicon
Last Answer : (B) Wrought
Description : Cupola produces __________ iron. (A) Pig (B) Cast (C) Wrought (D) Carbon free
Last Answer : (B) Cast
Description : Out of the following, the most malleable material is (A) Copper (B) Aluminium (C) Wrought iron (D) Lead
Last Answer : (D) Lead
Description : Out of the following __________ iron has the best capability to bear sudden & excessive shocks. (A) White (B) Cast (C) Wrought (D) Pig
Last Answer : (C) Wrought
Description : The product out from a cupola is called (A) Wrought iron (B) Pig iron (C) Cast iron (D) None of these
Description : Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron
Last Answer : D) Wrought iron
Description : Wrought iron does not have (A) Uniform strength in all directions (B) Ability to hold protective coating (C) High ductility & corrosion resistance (D) Easily weldable characteristics
Description : Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution
Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron
Last Answer : Option B
Description : __________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel
Last Answer : Option D