Steel balls are manufactured by (A) Sintering (B) Casting (C) Cold heading (D) Spinning

Steel balls are manufactured by
(A) Sintering
(B) Casting
(C) Cold heading
(D) Spinning
by

1 Answer

Answer :

(C) Cold heading
by

Related questions

The heat treatment process to which castings and the steel balls produced by cold heading are subjected is (A) Tempering (B) Normalising (C) Annealing (D) None of these

Description : The heat treatment process to which castings and the steel balls produced by cold heading are subjected is (A) Tempering (B) Normalising (C) Annealing (D) None of these

Last Answer : (B) Normalising

Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming

Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming

A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Description : A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Last Answer : (C) Investment casting

The process of heating the cold pressed metallic powder is called __________ in powder metallurgy. (A) Precipitation (B) Fusion (C) Sintering (D) Agglomeration

Description : The process of heating the cold pressed metallic powder is called __________ in powder metallurgy. (A) Precipitation (B) Fusion (C) Sintering (D) Agglomeration

Last Answer : (C) Sintering

Steel pipes are normally manufactured by __________ process. (A) Extrusion (B) Cold working (C) Forging (D) Electroforming

Description : Steel pipes are normally manufactured by __________ process. (A) Extrusion (B) Cold working (C) Forging (D) Electroforming

Last Answer : (A) Extrusion

The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Description : The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Last Answer : ANS: D

For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel

Description : For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel

Last Answer : (A) Platinum or gold alloys

Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush(D) True centrifugal

Description : Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush (D) True centrifugal

Last Answer : (D) True centrifugal

The most suitable material for die casting is (A) Iron (B) Copper (C) Steel (D) Nickel

Description : The most suitable material for die casting is (A) Iron (B) Copper (C) Steel (D) Nickel

Last Answer : (B) Copper

Oxygen cylinders used for autogenous (cutting/welding) purposes are (A) Seamless & made of steel (B) Heat treated before use (C) Made by sand casting (D) Welded steel cylinders

Description : Oxygen cylinders used for autogenous (cutting/welding) purposes are (A) Seamless & made of steel (B) Heat treated before use (C) Made by sand casting (D) Welded steel cylinders

Last Answer : Option A

Hollow shafts can be made as strong as solid shafts by making the twisting moments of both the shafts same. Shafts made by __________ have residual stresses. (A) Forging (B) Cold rolling (C) Hot rolling (D) Casting

Description : Hollow shafts can be made as strong as solid shafts by making the twisting moments of both the shafts same. Shafts made by __________ have residual stresses. (A) Forging (B) Cold rolling (C) Hot rolling (D) Casting

Last Answer : (B) Cold rolling

Wrought iron is never shaped by (A) Casting (B) Cold working (C) Forging (D) Welding

Description : Wrought iron is never shaped by (A) Casting (B) Cold working (C) Forging (D) Welding

Last Answer : (A) Casting

Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Description : Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Last Answer : (A) Blast furnace stove

Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Description : Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Last Answer : (A) By-product coke oven

In which of the following furnaces, the gases are sucked through the stock bed from below? (A) Soaking pit (B) Sintering machine (C) Beehive oven (D) None of these

Description : In which of the following furnaces, the gases are sucked through the stock bed from below? (A) Soaking pit (B) Sintering machine (C) Beehive oven (D) None of these

Last Answer : (B) Sintering machine

A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Description : A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting

Description : Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting

Last Answer : (A) Sintering

Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil(B) Sintering of porous catalyst(C) Hydrogen embrittlement(D) All (A), (B) and (C)

Description : Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil (B) Sintering of porous catalyst (C) Hydrogen embrittlement (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) Both laundry as well as toilet soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Description : Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) ... soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Last Answer : (A) Transparent soaps are made by cold process

Are You in The Search of Leading Stainless Steel Casting Manufacturers in India?

Description : Are You in The Search of Leading Stainless Steel Casting Manufacturers in India?

Last Answer : The renowned Class-A certified stainless steel casting manufacturers in India, Sujan Industries, has its own large plants situated around 30,000 sq.ft area and it is armoured with the latest ... in-house laboratory and deliver it to the industries like Aerospace, Defence, Heavy Vehicle, Rail

The element is used in locating defect in steel casting is

Description : The element is used in locating defect in steel casting is

Last Answer : The element is used in locating defect in steel casting is A. He B. Kr C. Xe D. Rn

Which of the manufacturing processes is/are required to make a typical stainless steel spoon out of sheet metal? A. Casting B. Forming C. Brazing D. Blow moulding

Description : Which of the manufacturing processes is/are required to make a typical stainless steel spoon out of sheet metal? A. Casting B. Forming C. Brazing D. Blow moulding

Last Answer : Forming

Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Description : Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Last Answer : (B) Lead

Balls in a ball mill are usually made of (A) Steel (B) Cast iron (C) Stainless steel (D) Bronze

Description : Balls in a ball mill are usually made of (A) Steel (B) Cast iron (C) Stainless steel (D) Bronze

Last Answer : (A) Steel

Steel balls for ball bearings are generally made of __________ steel. (A) Cast (B) Stainless (C) Free carbon (D) Carbon chrome

Description : Steel balls for ball bearings are generally made of __________ steel. (A) Cast (B) Stainless (C) Free carbon (D) Carbon chrome

Last Answer : (D) Carbon chrome

Explicit support structures are not required in Selective Laser Sintering (SLS). a.TRUE b.FALSE c. d.

Description : Explicit support structures are not required in Selective Laser Sintering (SLS). a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

In Selective Laser Sintering, laser light is also being used. a.TRUE b.FALSE c. d.

Description : In Selective Laser Sintering, laser light is also being used. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

In the process of Selective Laser Sintering, raw material used is in the form of ______ a.machining wax b.foam core c.powder d.rubber

Description : In the process of Selective Laser Sintering, raw material used is in the form of ______ a.machining wax b.foam core c.powder d.rubber

Last Answer : c.powder

Of all of the current material addition rapid prototyping technologies, which one is the mostwidely used? a.Ballistic particle manufacturing b.Selective laser sintering c.Solid ground curing d.Stereolithography

Description : Of all of the current material addition rapid prototyping technologies, which one is the mostwidely used? a.Ballistic particle manufacturing b.Selective laser sintering c.Solid ground curing d.Stereolithography

Last Answer : d.Stereolithography

Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Description : Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Last Answer : c.Laminated-Object Manufacturing

Which of the following RP technologies uses molten material as the starting material? a.Three-Dimensional Printing b.Fused-Deposition Modeling c.Stereolithography d.Selective Laser Sintering

Description : Which of the following RP technologies uses molten material as the starting material? a.Three-Dimensional Printing b.Fused-Deposition Modeling c.Stereolithography d.Selective Laser Sintering

Last Answer : c.Stereolithography

Which of the following RP technologies uses powders as the starting material? a.Droplet Deposition Manufacturing b.Fused-Deposition Modeling c.Selective Laser Sintering d.Stereolithography

Description : Which of the following RP technologies uses powders as the starting material? a.Droplet Deposition Manufacturing b.Fused-Deposition Modeling c.Selective Laser Sintering d.Stereolithography

Last Answer : c.Selective Laser Sintering

Which of the following is used as base material in Selective laser sintering (SLS)? a.Photopolymer b.Thermoplastics, Metal powders c.Titanium alloys d.Various materials

Description : Which of the following is used as base material in Selective laser sintering (SLS)? a.Photopolymer b.Thermoplastics, Metal powders c.Titanium alloys d.Various materials

Last Answer : b.Thermoplastics, Metal powders

Which of the following RP system is not developed by 3D systems? a.Selective Laser Sintering (SLS) b.Multi-Jet Modeling System (MJM) c.Paper Lamination Technology (PLT) d.Stereolithography Apparatus (SLA)

Description : Which of the following RP system is not developed by 3D systems? a.Selective Laser Sintering (SLS) b.Multi-Jet Modeling System (MJM) c.Paper Lamination Technology (PLT) d.Stereolithography Apparatus (SLA)

Last Answer : c.Paper Lamination Technology (PLT)

Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Description : Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Last Answer : b.Solid Object Ultraviolet-Laser Printer (SOUP)

Which of the following process is not formative process? a.Bending b.Plastic injection molding c.Selective Laser Sintering d.Forging

Description : Which of the following process is not formative process? a.Bending b.Plastic injection molding c.Selective Laser Sintering d.Forging

Last Answer : c.Selective Laser Sintering

The steel which contains fissures and cavities, is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The steel which contains fissures and cavities, is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option A

Expanded metal is (A) Manufactured from steel sheets (B) Used for reinforced concrete in road pavements (C) Measured in term of SWM (short way mesh) and LWM (long way mesh) (D) All the above

Description : Expanded metal is (A) Manufactured from steel sheets (B) Used for reinforced concrete in road pavements (C) Measured in term of SWM (short way mesh) and LWM (long way mesh) (D) All the above

Last Answer : Answer: Option D

Cast steel is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth proce

Description : Cast steel is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option B

Factory equipment allows hermetically sealed sanitary steel cans to be manufactured and later sealed at the rate of ____ units per minute. a. 500 c. 1,000 b. 1,500 d. 1,200

Description : Factory equipment allows hermetically sealed sanitary steel cans to be manufactured and later sealed at the rate of ____ units per minute. a. 500 c. 1,000 b. 1,500 d. 1,200

Last Answer : c. 1,000

Vanadium steel is generally used for (A) Railway switches and crossing (B) Bearing balls (C) Magnets (D) Axles and spring

Description : Vanadium steel is generally used for (A) Railway switches and crossing (B) Bearing balls (C) Magnets (D) Axles and spring

Last Answer : Answer: Option D

Two steel balls are at a distance S from one another. As the mass of ONE of the balls is doubled, the gravitational force of attraction between them is: w) quartered x) halved y) doubled z) quadrupled

Description : Two steel balls are at a distance S from one another. As the mass of ONE of the balls is doubled, the gravitational force of attraction between them is: w) quartered x) halved y) doubled z) quadrupled

Last Answer : ANSWER: Y -- DOUBLED 

In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Description : In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Last Answer : (D) Saturated polyeste

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

__________ is the process used for setting up compressive stresses in the surface of a metal to improve its fatigue strength. (A) Lancing (B) Shot peening (C) Slugging (D) Spinning

Description : __________ is the process used for setting up compressive stresses in the surface of a metal to improve its fatigue strength. (A) Lancing (B) Shot peening (C) Slugging (D) Spinning

Last Answer : (B) Shot peening

Circular cross section machine parts which are symmetrical about the axis of rotation are made by hot (A) Piercing (B) Spinning (C) Drawing (D) Extrusion

Description : Circular cross section machine parts which are symmetrical about the axis of rotation are made by hot (A) Piercing (B) Spinning (C) Drawing (D) Extrusion

Last Answer : Option B

The crushed material received for separation is called feed or (A) Tailing (B) Heading (C) Concentrate (D) Middling

Description : The crushed material received for separation is called feed or (A) Tailing (B) Heading (C) Concentrate (D) Middling

Last Answer : (B) Heading