Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing

Ceramic materials fabrication cannot be done by
(A) Welding
(B) Slip casting
(C) Extrusion
(D) Plastic pressing
by

1 Answer

Answer :

(A) Welding
by

Related questions

All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Description : All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Last Answer : (C) Buckets

Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming

Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming

What is the name of the white clay which has been used for thousands of years in the fabrication of ceramic bodies? Is it: w) Talc x) Kaolin y) Feldspar z) Quartz

Description : What is the name of the white clay which has been used for thousands of years in the fabrication of ceramic bodies? Is it: w) Talc x) Kaolin y) Feldspar z) Quartz

Last Answer : ANSWER: X -- KAOLIN

Plastic tubes & pipes are generally made by __________ moulding. (A) Injection (B) Transfer (C) Extrusion (D) Compression

Description : Plastic tubes & pipes are generally made by __________ moulding. (A) Injection (B) Transfer (C) Extrusion (D) Compression

Last Answer : (C) Extrusion

Wrought iron is never shaped by (A) Casting (B) Cold working (C) Forging (D) Welding

Description : Wrought iron is never shaped by (A) Casting (B) Cold working (C) Forging (D) Welding

Last Answer : (A) Casting

Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Description : Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Last Answer : options A

Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Description : Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Last Answer : Option C

Oxygen cylinders used for autogenous (cutting/welding) purposes are (A) Seamless & made of steel (B) Heat treated before use (C) Made by sand casting (D) Welded steel cylinders

Description : Oxygen cylinders used for autogenous (cutting/welding) purposes are (A) Seamless & made of steel (B) Heat treated before use (C) Made by sand casting (D) Welded steel cylinders

Last Answer : Option A

__________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Description : __________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Last Answer : (C) Injection

Pick up the correct statement from the following: (A) Air bubbles in casting produce a dull sound by tapping their surfaces lightly with a hammer (B) Cupola furnace is used for the manufacture of cast iron (C) Red short iron is of no value for welding purpose (D) All the above

Description : Pick up the correct statement from the following: (A) Air bubbles in casting produce a dull sound by tapping their surfaces lightly with a hammer (B) Cupola furnace is used for the manufacture of cast iron (C) Red short iron is of no value for welding purpose (D) All the above

Last Answer : Answer: Option D

What are the four most common materials used in semiconductor detector fabrication?

Description : What are the four most common materials used in semiconductor detector fabrication?

Last Answer : Silicon, gallium arsenide, germanium, and indium phosphide.

Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than the original impression C. The strength of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Description : Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than ... of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Last Answer : A. They lack accurate reproduction of surface details

Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Last Answer : (C) 350-400

Forge welding involves heating of parts to elastic stage and joint is prepared by impact force. a) Yes b) No, it is done up to plastic stage c) Heating is done up to boiling point d) None of the listed

Description : Forge welding involves heating of parts to elastic stage and joint is prepared by impact force. a) Yes b) No, it is done up to plastic stage c) Heating is done up to boiling point d) None of the listed

Last Answer : b) No, it is done up to plastic stage

Ceramic materials are (A) Organic in nature (B) Stronger in compression than in tension (C) Always amorphous in nature (D) Always bad heat conductors

Description : Ceramic materials are (A) Organic in nature (B) Stronger in compression than in tension (C) Always amorphous in nature (D) Always bad heat conductors

Last Answer : (B) Stronger in compression than in tension

Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Description : Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon

Description : Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon

Last Answer : (D) Teflon

Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles

Description : Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles

Last Answer : Berl saddles

Viscoelastic behaviour is observed in __________ materials. (A) Non-crystalline organic polymeric (B) Ceramic (C) All crystalline (D) All amorphous

Description : Viscoelastic behaviour is observed in __________ materials. (A) Non-crystalline organic polymeric (B) Ceramic (C) All crystalline (D) All amorphous

Last Answer : Non-crystalline organic polymeric

I just got a shard of plastic or ceramic in my frozen dinner. Can I get money out of this, and if so how?

Description : I just got a shard of plastic or ceramic in my frozen dinner. Can I get money out of this, and if so how?

Last Answer : answer:The problem is you were not injured, so your loss is the cost of the dinner. If you cut your tongue or cheek or chipped a tooth, you’d have a claim for injury and maybe trauma. Sorry.

I am deep but not a basin. I hold, but do not have hands. I am made of plastic, metal or ceramic. What am I? -Riddles

Description : I am deep but not a basin. I hold, but do not have hands. I am made of plastic, metal or ceramic. What am I? -Riddles

Last Answer : This answer was deleted by moderators

Which of the following pairs regarding typical composition of hospital wastes is incorrect? (A) Plastic - 9-12% (B) Metals - 1-2% (C) Ceramic - 8-10% (D) Biodegradable - 35-40%

Description : Which of the following pairs regarding typical composition of hospital wastes is incorrect? (A) Plastic - 9-12% (B) Metals - 1-2% (C) Ceramic - 8-10% (D) Biodegradable - 35-40%

Last Answer : (A) Plastic - 9-12%

Sensible heat of hot industrial flue gases cannot be recovered by a/an (A) Economiser (B) Regenerator (C) Ceramic recuperator (D) None of these

Description : Sensible heat of hot industrial flue gases cannot be recovered by a/an (A) Economiser (B) Regenerator (C) Ceramic recuperator (D) None of these

Last Answer : (D) None of these

Why is glazing used to make ceramic materials ?

Description : Why is glazing used to make ceramic materials ?

Last Answer : A mixture of ceramic materials is molded into a specific molding of the crossing and after drying in hot air, it is burned and turned into perforated burnt ceramic material or biscuits. In this ... . into a thin glass material. Glazing closes the pores on the surface of the material biscuits.

Cracking of ceramic articles can be controlled by non-clay materials like

Description : Cracking of ceramic articles can be controlled by non-clay materials like

Last Answer : flint/quartz.

Give reason: Unglazed ceramic materials are used in water filters.

Description : Give reason: Unglazed ceramic materials are used in water filters.

Last Answer : Unglazed ceramic materials use the small pores to filter dirt, debris and bacteria out of water.

Ceramic materials possess which of the following properties? a) Brittle and low dielectric constant b) Rigid and low dielectric constant c) Brittle and high dielectric constant d) Rigid and high dielectric constant

Description : Ceramic materials possess which of the following properties? a) Brittle and low dielectric constant b) Rigid and low dielectric constant c) Brittle and high dielectric constant d) Rigid and high dielectric constant

Last Answer : c) Brittle and high dielectric constant

Give properties and uses of ceramic materials in construction.

Description : Give properties and uses of ceramic materials in construction.

Last Answer : Properties: 1. It is hard. 2. It is bristle. 3. It is in the form of amorphous (non-crystalline) 4. The structure is glassy. 5. It is insulator thermally & electrically. 6. It is ... porcelain. 6. For making POP. 7. For making electric. 8. For Manufacturing of sanitary wares, pavers. 

Which of the following physical properties is TRUE of most dense ceramic materials? w) high tensile strength x) good ductility y) high compressive strength z) high electrical conductivity

Description : Which of the following physical properties is TRUE of most dense ceramic materials? w) high tensile strength x) good ductility y) high compressive strength z) high electrical conductivity

Last Answer : ANSWER: Y -- HIGH COMPRESSIVE STRENGTH

Write four properties of Ceramic Materials and give it’s applications in automobile industry.

Description : Write four properties of Ceramic Materials and give it’s applications in automobile industry.

Last Answer : Properties of Ceramic Material: i. Inorganic & non -metallic material. ii. Brittle material. iii. Insulation to flow of electric current iv. Withstand high temperature. v. Rock like appearance vi. Hardness ... mica etc. 7. In I.C. engines and turbines as armor plates. 8. In cutting tools 

Dislocation cross-slip is difficult in those materials, which have (A) Large number of slip systems (B) High work hardening rate (C) Coarse grain size (D) Low stacking fault energy

Description : Dislocation cross-slip is difficult in those materials, which have (A) Large number of slip systems (B) High work hardening rate (C) Coarse grain size (D) Low stacking fault energy

Last Answer : (D) Low stacking fault energy

The process involved in converting rubber into a thin sheet or coating it on fabric is called (A) Extrusion (B) Mastication (C) Calendaring (D) Vulcanisation

Description : The process involved in converting rubber into a thin sheet or coating it on fabric is called (A) Extrusion (B) Mastication (C) Calendaring (D) Vulcanisation

Last Answer : (C) Calendaring

Collapsible tubes for tooth paste are produced by __________ extrusion. (A) Direct (B) Indirect (C) Impact (D) None of these

Description : Collapsible tubes for tooth paste are produced by __________ extrusion. (A) Direct (B) Indirect (C) Impact (D) None of these

Last Answer : (C) Impact

__________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion

Description : __________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion

Last Answer : (C) Transfer

Tyres are made by (A) Injection moulding (B) Extrusion (C) Rotational moulding (D) Compression moulding

Description : Tyres are made by (A) Injection moulding (B) Extrusion (C) Rotational moulding (D) Compression moulding

Last Answer : (C) Rotational moulding

For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel

Description : For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel

Last Answer : (A) Platinum or gold alloys

Steel pipes are normally manufactured by __________ process. (A) Extrusion (B) Cold working (C) Forging (D) Electroforming

Description : Steel pipes are normally manufactured by __________ process. (A) Extrusion (B) Cold working (C) Forging (D) Electroforming

Last Answer : (A) Extrusion

The process involved in converting rubber into a thin sheet or coating it on fabric is called (A) Extrusion (B) Mastication (C) Calendaring (D) Vulcanisation

Description : The process involved in converting rubber into a thin sheet or coating it on fabric is called (A) Extrusion (B) Mastication (C) Calendaring (D) Vulcanisation

Last Answer : (C) Calendaring

Production of a hollow product by inflation of a tube or parison is called the __________ process. (A) Blow moulding (B) Calendaring (C) Extrusion (D) Injection

Description : Production of a hollow product by inflation of a tube or parison is called the __________ process. (A) Blow moulding (B) Calendaring (C) Extrusion (D) Injection

Last Answer : (A) Blow moulding

In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel

Description : In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel

Last Answer : (C) High speed steel

Earing is a defect found in steels after the following metal working operation. (A) Extrusion (B) Rolling (C) Deep drawing (D) Wire drawing

Description : Earing is a defect found in steels after the following metal working operation. (A) Extrusion (B) Rolling (C) Deep drawing (D) Wire drawing

Last Answer : (C) Deep drawing

The mechanism involved in the removal of metal in drilling operation is by (A) Compression (B) Extrusion (C) Shearing (D) Both 'b' & 'c'

Description : The mechanism involved in the removal of metal in drilling operation is by (A) Compression (B) Extrusion (C) Shearing (D) Both 'b' & 'c'

Last Answer : (D) Both 'b' & 'c'

In extrusion of metals, which of the following statement is true? (A) Speed of the extruded material is same as that of ram speed (B) Redundant work is a function of the die angle (C) Relative motion between the billet surface and the container wall is always present (D) Hollow ram is used for indirect extrusion

Description : In extrusion of metals, which of the following statement is true? (A) Speed of the extruded material is same as that of ram speed (B) Redundant work is a function of the die angle (C) ... the billet surface and the container wall is always present (D) Hollow ram is used for indirect extrusion

Last Answer : (D) Hollow ram is used for indirect extrusion

Circular cross section machine parts which are symmetrical about the axis of rotation are made by hot (A) Piercing (B) Spinning (C) Drawing (D) Extrusion

Description : Circular cross section machine parts which are symmetrical about the axis of rotation are made by hot (A) Piercing (B) Spinning (C) Drawing (D) Extrusion

Last Answer : Option B

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication(C) Develop new improved properties not present in the original resin(D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resin (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Description : Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Last Answer : (B) High pressure drop of the gas

Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Description : Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Last Answer : (C) To obtain higher heat transfer co-efficient and shorter tube

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded