Fibre glass is a composite material of (A) Glass fibre in a polymer matrix (B) Glass fibre in a metallic matrix (C) Polymer fibre in a glassy matrix (D) Both 'b' & 'c' Fibre glass is a composite material of (A) Glass fibre in a polymer matrix (B) Glass fibre in a metallic matrix (C) Polymer fibre in a glassy matrix (D) Both 'b' & 'c'

Fibre glass is a composite material of
(A) Glass fibre in a polymer matrix
(B) Glass fibre in a metallic matrix
(C) Polymer fibre in a glassy matrix
(D) Both 'b' & 'c'
by

1 Answer

Answer :

(A) Glass fibre in a polymer matrix
by

Related questions

Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise of conveyor belt system is reduced by using urethane coated cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

. The physical state in which polymers exist is (A) Melts & rubber like state (B) Amorphous glassy state (C) Partially crystalline state (D) All (A), (B) and (C)

Description : . The physical state in which polymers exist is (A) Melts & rubber like state (B) Amorphous glassy state (C) Partially crystalline state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Description : Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Last Answer : Option D

Orlan fibre which is used as a wool substitute is (A) An amorphous polymer (B) A natural polymeric fibre (C) Polyacrylonitrile (D) Poly-methyl-methacrylate (PMMA)

Description : Orlan fibre which is used as a wool substitute is (A) An amorphous polymer (B) A natural polymeric fibre (C) Polyacrylonitrile (D) Poly-methyl-methacrylate (PMMA)

Last Answer : (C) Polyacrylonitrile

Which of the following is the most widely used insulating material for steam carrying pipelines? (A) Ceramic fibre blanket (B) Glass wool and 85% magnesia (C) Vermiculite (D) Slag wool

Description : Which of the following is the most widely used insulating material for steam carrying pipelines? (A) Ceramic fibre blanket (B) Glass wool and 85% magnesia (C) Vermiculite (D) Slag wool

Last Answer : (B) Glass wool and 85% magnesia

Vycor, a widely used material for making 'thermal wells' in temperature measurement, is a (A) Cermet (B) Glass (C) Thermosetting plastic (D) Metallic alloy

Description : Vycor, a widely used material for making 'thermal wells' in temperature measurement, is a (A) Cermet (B) Glass (C) Thermosetting plastic (D) Metallic alloy

Last Answer : (B) Glass

How good are Carbon Fibre reinforced Composite Materials at stopping Bullets?

Description : How good are Carbon Fibre reinforced Composite Materials at stopping Bullets?

Last Answer : There’s a thread on this subject with interesting points on a gun DB I’m not an expert on this subject at all, but I thought carbon fiber was too breakable (I’m into cars)

Pin Restoration with which material has the best retention: A. Amalgam B. Gold inlay C. Composite D. Glass Ionomer

Description : Pin Restoration with which material has the best retention:  A. Amalgam  B. Gold inlay  C. Composite  D. Glass Ionomer 

Last Answer : C. Composite 

Choose the optical fibre material from the given materials. a) Glass b) Plastic c) Silica d) Quartz

Description : Choose the optical fibre material from the given materials. a) Glass b) Plastic c) Silica d) Quartz

Last Answer : c) Silica

Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Description : Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Last Answer : b) Polymer

Maraging steels derive their strength from the following mechanism: (A) A fine, highly dislocated and strong martensite (B) Fine dispersions of inter-metallic of Fe, Ni, Ti etc (C) Fine dispersions of alloy carbides in a ferrite matrix (D) Fine dispersions of Fe3 C nucleated on dislocations in austenite

Description : Maraging steels derive their strength from the following mechanism: (A) A fine, highly dislocated and strong martensite (B) Fine dispersions of inter-metallic of Fe, Ni, Ti etc (C) Fine ... alloy carbides in a ferrite matrix (D) Fine dispersions of Fe3 C nucleated on dislocations in austenite

Last Answer : Option A

The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Description : The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Last Answer : (2) Polystyrene Explanation: Polystyrene is an synthetic aromatic polymer made from the monomer styrene, a liquid petrochemical. It is one of the most widely used plastics. Uses include protective ... containers (such as "clamshells"), lids, bottles, trays, tumblers, and disposable cutlery.

The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Description : The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Last Answer : Polystyrene

Assertion : Fibrous cartilage posses thich dense bundle of collagen fibre in matrix. Reason : Fibrous cartilage is the hardest cartilage.

Description : Assertion : Fibrous cartilage posses thich dense bundle of collagen fibre in matrix. Reason : Fibrous cartilage is the hardest cartilage.

Last Answer : Assertion : Fibrous cartilage posses thich dense bundle of collagen fibre in matrix. Reason : Fibrous ... D. If both Assertion & Reason are false.

Which of the following is NOT a characteristic of glass ionomer cements? a. strong in compression but weaker in tension True b. the matrix is formed during the initial set of the cement c. sets via an ion exchange reaction that continues for at least 24 hours true d. suitable for use as a core build up material in anterior teeth

Description : Which of the following is NOT a characteristic of glass ionomer cements? a. strong in compression but weaker in tension True b. the matrix is formed during the initial set of the cement c. sets via ... for at least 24 hours true d. suitable for use as a core build up material in anterior teeth

Last Answer : d. suitable for use as a core build up material in anterior teeth

What is smooth glassy rock that forms when lava cools so fast that there is no time for crystals to form?

Description : What is smooth glassy rock that forms when lava cools so fast that there is no time for crystals to form?

Last Answer : Obsidian

What Describes if a mineral is shiny pearly glassy or dull?

Description : What Describes if a mineral is shiny pearly glassy or dull?

Last Answer : Feel Free to Answer

The most useless aggregate is one whose surface texture is (A) Smooth (B) Granular (C) Glassy (D) Honey combed and porous

Description : The most useless aggregate is one whose surface texture is (A) Smooth (B) Granular (C) Glassy (D) Honey combed and porous

Last Answer : (C) Glassy

Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to the shape of the particles, concrete aggregates are classified as rounded irregular, angular and flaky (C) According to the surface texture of the particles, the concrete aggregates are classified as glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Description : Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to ... glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Last Answer : Answer: Option D

In paints, the pigment is responsible for (A) Durability (B) Colour (C) Smoothness (D) Glassy face

Description : In paints, the pigment is responsible for (A) Durability (B) Colour (C) Smoothness (D) Glassy face

Last Answer : Answer: Option B

A solid is which atoms are in a regular order is called a) Crystalline solid b) Amorphous solid c) Polymeric solid d) Glassy solid

Description : A solid is which atoms are in a regular order is called a) Crystalline solid b) Amorphous solid c) Polymeric solid d) Glassy solid

Last Answer : a) Crystalline solid

An igneous rock which is commonly black, has a glassy texture, and has a conchoidal (pron: kong-koid-al) fracture is whic of the following? w) pelite (pron: pel-ite) x) calcite y) obsidian z) none of the above

Description : An igneous rock which is commonly black, has a glassy texture, and has a conchoidal (pron: kong-koid-al) fracture is whic of the following? w) pelite (pron: pel-ite) x) calcite y) obsidian z) none of the above

Last Answer : ANSWER: Y -- OBSIDIAN

Type of glass used in optical work is the __________ glass. (A) Soda-lime (B) Fibre (C) Lead (D) Borosilicate

Description : Type of glass used in optical work is the __________ glass. (A) Soda-lime (B) Fibre (C) Lead (D) Borosilicate

Last Answer : (C) Lead

Which glass is usually used in optical work? (A) Lead glass (B) High silica (borosilicate) glass (C) Photo-sensitive glass (D) Fibre glass

Description : Which glass is usually used in optical work? (A) Lead glass (B) High silica (borosilicate) glass (C) Photo-sensitive glass (D) Fibre glass

Last Answer : (C) Photo-sensitive glass

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

Etching a hybrid glass ionomer-composite a. is necessary for composite resin bonding b. is not necessary for composite resin bonding c. is necessary for adding a glass ionomer cement for repair d. is not necessary for adding a glass ionomer cement for repair e. a 3-5 second etch with 10% phosphoric acid is recommended

Description : Etching a hybrid glass ionomer-composite a. is necessary for composite resin bonding b. is not necessary for composite resin bonding c. is necessary for adding a glass ionomer cement for repair ... glass ionomer cement for repair e. a 3-5 second etch with 10% phosphoric acid is recommended

Last Answer : b. is not necessary for composite resin bonding

A composite flat wall of a furnace is made of two materials 'A' and 'B'. The thermal conductivity of 'A' is twice of that of material 'B', while the thickness of layer of 'A' is half that of B. If the temperature at the two sides of the wall are 400 and 1200°K, then the temperature drop (in °K) across the layer of material 'A' is (A) 125 (B) 133 (C) 150 (D) 160

Description : A composite flat wall of a furnace is made of two materials 'A' and 'B'. The thermal conductivity of 'A' is twice of that of material 'B', while the thickness of layer of 'A' is half that of B. If the temperature ... drop (in °K) across the layer of material 'A' is (A) 125 (B) 133 (C) 150 (D) 160

Last Answer : (D) 160

Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms of permanganate number (C) Bagasse fibre contains both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Description : Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Last Answer : (4) Fibre glass Explanation: Fiberglass is a lightweight, extremely strong, and robust material. Although strength properties are somewhat lower than carbon fiber and it is less stiff, the material ... also very favorable when compared to metals, and it can be easily formed using molding processes.

Fibre glass (A) Retains heat-longer (B) Has a higher strength to weight ratio (C) Is shock proof and fire retardant (D) All the above

Description : Fibre glass (A) Retains heat-longer (B) Has a higher strength to weight ratio (C) Is shock proof and fire retardant (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Description : Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Last Answer : Fibre glass

Fibre glass insulation can be used up to temperature of

Description : Fibre glass insulation can be used up to temperature of (A) 60°C (B) 80°C (C) 130°C (D) 180°

Last Answer : Fibre glass insulation can be used up to temperature of 130°C

Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Description : Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Glass is a – (1) pure solid (2) supercooled liquid (3) gel (4) polymer

Description : Glass is a – (1) pure solid (2) supercooled liquid (3) gel (4) polymer

Last Answer : (2) supercooled liquid Explanation: Glass is an amorphous (noncrystalline) solid material. Glasses are typically brittle and optically transparent. The standard definition of a glass (or vitreous solid ... is often used to describe any amorphous solid that exhibits a glass transition temperature Tg.

What is the advantage of synthetic polymer over glass? OR Why is glass being replaced by synthetic polymers?

Description : What is the advantage of synthetic polymer over glass? OR Why is glass being replaced by synthetic polymers?

Last Answer : Glass is being replaced by light and transparent synthetic polymers like poly methyl metacrylate polymers. The advantages of polymers are that they are unbreakable, light and scratches on polymers can be removed by wiping with acetone.

Metallic soap is __________ salt of fatty acids. (A) Sodium (B) Potassium (C) Both sodium & potassium (D) Aluminium or calcium

Description : Metallic soap is __________ salt of fatty acids. (A) Sodium (B) Potassium (C) Both sodium & potassium (D) Aluminium or calcium

Last Answer : (D) Aluminium or calcium

Metalloids (A) Are good conductor of heat & electricity (B) Act as electron donors with metals & as electron acceptor with non metals (C) Are not necessarily solids at room temperature (D) Are compounds that exhibit both metallic & non-metallic properties to some extent and are exemplified by elements like germanium, silicon & boron

Description : Metalloids (A) Are good conductor of heat & electricity (B) Act as electron donors with metals & as electron acceptor with non metals (C) Are not necessarily solids at room temperature ... & non-metallic properties to some extent and are exemplified by elements like germanium, silicon & boron

Last Answer : D) Are compounds that exhibit both metallic & non-metallic properties to some extent and are exemplified by elements like germanium, silicon & boron

A glass tube of smaller diameter is used while performing an experiment for the capillary rise of water because (A) It is easier to see through the glass tube (B) Glass tube is cheaper than a metallic tube (C) It is not possible to conduct this experiment with any other tube (D) All of the above

Description : A glass tube of smaller diameter is used while performing an experiment for the capillary rise of water because (A) It is easier to see through the glass tube (B) Glass tube is cheaper than a metallic ... (C) It is not possible to conduct this experiment with any other tube (D) All of the above

Last Answer : Answer: Option A

Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Description : Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Last Answer : (B) Inorganic polymer

Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Description : Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Last Answer : (A) Epoxy polymer

Similarity in DNA and RNA is that (a) both are polymer of nucleotides (b) both have similar pyrimidine (c) both have similar sugar (d) both are genetic material.

Description : Similarity in DNA and RNA is that (a) both are polymer of nucleotides (b) both have similar pyrimidine (c) both have similar sugar (d) both are genetic material.

Last Answer : (b) both have similar pyrimidine

Similarity in DNA and RNA is that (a) both are polymer of nucleotides (b) both have similar pyrimidine (c) both have similar sugar (d) both are genetic material.

Description : Similarity in DNA and RNA is that (a) both are polymer of nucleotides (b) both have similar pyrimidine (c) both have similar sugar (d) both are genetic material.

Last Answer : both are polymer of nucleotides

In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material (D) None of these

Description : In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By ... material (like chequor bricks) and then heating the air from this hot material (D) None of these

Last Answer : (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material

What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2

In the formation of cermets, the ratio of ceramic material to metallic material is usually 80:20. Which of the following is a cermet? (A) Zirconia (B) Alumina (C) Bakelite (D) Tungsten carbi

Description : In the formation of cermets, the ratio of ceramic material to metallic material is usually 80:20. Which of the following is a cermet? (A) Zirconia (B) Alumina (C) Bakelite (D) Tungsten carbi

Last Answer : Option D

X-ray films have an emulsion on one or both sides of a support material. The emulsion contains particles of, A. Silver nitrate crystal B. Metallic silver in gelatine C. Silver bromide in gelatine D. Silver nitrate in gelatine E. Potassium bromide in gelatine

Description : X-ray films have an emulsion on one or both sides of a support material. The emulsion contains particles of, A. Silver nitrate crystal B. Metallic silver in gelatine C. Silver bromide in gelatine D. Silver nitrate in gelatine E. Potassium bromide in gelatine

Last Answer : C. Silver bromide in gelatine

Beams composed of more than one material, rigidly connected together so as to behave as one piece, are known as (A) Compound beams (B) Indeterminate beams (C) Determinate beams (D) Composite beams

Description : Beams composed of more than one material, rigidly connected together so as to behave as one  piece, are known as  (A) Compound beams  (B) Indeterminate beams  (C) Determinate beams  (D) Composite beams

Last Answer : (D) Composite beams

A patient comes to you with medium pain of tooth filled with Composite resin as a result of cold or hot drinks, what will your initial management be, A. Remove the restorative material and start an Endontic treatment B. Remove the restorative material and place a sedative temporary material C. Place a coat of bonding material on the old composite

Description : A patient comes to you with medium pain of tooth filled with Composite resin as a result of cold or hot drinks, what will your initial management be, A. Remove the restorative material and ... material and place a sedative temporary material C. Place a coat of bonding material on the old composite

Last Answer : B. Remove the restorative material and place a sedative temporary material