Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Fibre reinforced plastic (FRP) are
(A) Made of glass fibre and thermoplastic resins
(B) Anisotropic
(C) Made of thermosetting resin and glass fibre
(D) Both 'b' & 'c'
by

1 Answer

Answer :

Option D
by

Related questions

Polyurethane cannot be used to make (A) Automobile cushion (B) Thermal insulation in refrigerator (C) Coating and adhesive (D) Fibre reinforced plastic (FRP)

Description : Polyurethane cannot be used to make (A) Automobile cushion (B) Thermal insulation in refrigerator (C) Coating and adhesive (D) Fibre reinforced plastic (FRP)

Last Answer : (D) Fibre reinforced plastic (FRP)

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Thermoplastic resins usually(A) Remain hard as long as they are hot(B) Cannot be reclaimed from waste(C) Permanent setting resins(D) Less brittle than thermosetting resins

Description : Thermoplastic resins usually (A) Remain hard as long as they are hot (B) Cannot be reclaimed from waste (C) Permanent setting resins (D) Less brittle than thermosetting resins

Last Answer : (D) Less brittle than thermosetting resins

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Description : All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Last Answer : (C) Buckets

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

Compare between thermoplastic and thermosetting plastic.

Description : Compare between thermoplastic and thermosetting plastic.

Last Answer : Thermoplastics Thermosetting They can be repeated softened by heat and hardened on cooling Once hardened and set they do not softened with application of heat They are formed by ... to soft under heat  They can be used at comparatively higher temperature without damage. 

Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Description : Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Last Answer : (4) Fibre glass Explanation: Fiberglass is a lightweight, extremely strong, and robust material. Although strength properties are somewhat lower than carbon fiber and it is less stiff, the material ... also very favorable when compared to metals, and it can be easily formed using molding processes.

Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Description : Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Last Answer : Fibre glass

.In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. A higher coefficient of thermal expansion and a lower crashing strength C. A lower coefficient of thermal expansion and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength

Description : .In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. ... and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength

Last Answer : B. A higher coefficient of thermal expansion and a lower crashing strength

The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Description : The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Last Answer : (A) Unsaturated polyester

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making

Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Description : Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Last Answer : (C) Easily deform under pressure at high temperature

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Last Answer : (A) Decorative paint

Thermosetting resins are those polymers, which (A) Do not increase in plasticity with rise in temperature (B) Allow slip to occur between molecules (C) Do not take on a permanent set (D) None of theseThermosetting resins are those polymers, which(A) Do not increase in plasticity with rise in temperature(B) Allow slip to occur between molecules(C) Do not take on a permanent set(D) None of these

Description : Thermosetting resins are those polymers, which (A) Do not increase in plasticity with rise in temperature (B) Allow slip to occur between molecules (C) Do not take on a permanent set (D) None of these

Last Answer : (A) Do not increase in plasticity with rise in temperature

Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Description : Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Last Answer : (A) Urea formaldehyde

Gutta percha rubber is (A) Soft & tacky at room temperature (B) An isomer of natural rubber (C) A thermosetting resin (D) Recovered by coagulation of rubber latex

Description : Gutta percha rubber is (A) Soft & tacky at room temperature (B) An isomer of natural rubber (C) A thermosetting resin (D) Recovered by coagulation of rubber latex

Last Answer : (B) An isomer of natural rubber

Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Description : Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Last Answer : (B) Thermosetting

Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Description : Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Last Answer : (B) Thermoplastic

Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Last Answer : (B) Have three dimensional structure

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Description : Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Last Answer : (B) Thermoplastic

Differentiate between Thermoplastic and Thermosetting polymers.

Description : Differentiate between Thermoplastic and Thermosetting polymers.

Last Answer : Differentiate between Thermosetting and Thermoplastic polymers: Thermosetting Thermoplastic Polymers which once mould /shaped do not soften when heated and thus cannot be reshaped  Polymers whose ... tri, tetra or poly functional. Monomer used in this polymer bi functional.

Vycor, a widely used material for making 'thermal wells' in temperature measurement, is a (A) Cermet (B) Glass (C) Thermosetting plastic (D) Metallic alloy

Description : Vycor, a widely used material for making 'thermal wells' in temperature measurement, is a (A) Cermet (B) Glass (C) Thermosetting plastic (D) Metallic alloy

Last Answer : (B) Glass

Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Description : Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Last Answer : (A) Melamine resins

The only natural thermoplastic resin, which is a product of animal life is (A) Rosin (B) Shellac (C) Amber (D) Copal

Description : The only natural thermoplastic resin, which is a product of animal life is (A) Rosin (B) Shellac (C) Amber (D) Copal

Last Answer : (B) Shellac

Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise of conveyor belt system is reduced by using urethane coated cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

In 3rd generation dentin bonding agents, HEMA (Hydroxyethylmethacrylate) is 1. a hydrophilic monomer that wets the dentinal surface 2. a hydrophilic resin that forms a ”hybrid” layer by chemically reacting the intertubular dentin. 3. a hydrophilic monomer that alters collagen to promote cross linking of collagen to dentin. 4. a bifunctional molecule resin that copolymerizes to bis-GMA resins. a. 1,2 b. 1,4 c. 2,3 d. 1,3 e. 3,4

Description : In 3rd generation dentin bonding agents, HEMA (Hydroxyethylmethacrylate) is 1. a hydrophilic monomer that wets the dentinal surface 2. a hydrophilic resin that forms a hybrid layer by chemically reacting the intertubular dentin. 3. a hydrophilic ... a. 1,2 b. 1,4 c. 2,3 d. 1,3 e. 3,4

Last Answer : b. 1,4

The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion of the resin. C. Produces porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Description : The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion ... porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Last Answer : B. Produces porosity on the internal portion of the resin.

Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Last Answer : (B) For fibre making

Which type of glass is used for making glass reinforced plastic? -General Knowledge

Description : Which type of glass is used for making glass reinforced plastic? -General Knowledge

Last Answer : The answer is 'Quartz glass'

Which type of glass is used for making glass reinforced plastic? -General Knowledge

Description : Which type of glass is used for making glass reinforced plastic? -General Knowledge

Last Answer : answer:

Which type of glass is used for making glass reinforced plastic? -General Knowledge

Description : Which type of glass is used for making glass reinforced plastic? -General Knowledge

Last Answer : answer:

Which type of Glass is used for making glass reinforced plastic?

Description : Which type of Glass is used for making glass reinforced plastic?

Last Answer : Fiber glass

Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating process (C) The plastic articles made by placing raw material in the desired moulds, is known as moulding process (D) All the above

Description : Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating ... placing raw material in the desired moulds, is known as moulding process (D) All the above

Last Answer : Answer: Option D

__________ practically possess no elasticity. (A) Vulcanite or ebonite(B) Spandex fibre(C) Polysulphide rubber(D) Epoxy resin

Description : __________ practically possess no elasticity. (A) Vulcanite or ebonite (B) Spandex fibre (C) Polysulphide rubber (D) Epoxy resin

Last Answer : (A) Vulcanite or ebonite

Steady state one dimensional heat flow by conduction as given by Fourier's low does not assume that (A) There is no internal heat generation (B) Boundary surfaces are isothermal (C) Material is anisotropic (D) Constant temperature gradient exists

Description : Steady state one dimensional heat flow by conduction as given by Fourier's low does not assume that (A) There is no internal heat generation (B) Boundary surfaces are isothermal (C) Material is anisotropic (D) Constant temperature gradient exists

Last Answer : (C) Material is anisotropic

Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive(d) All of the above

Description : Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive (d) All of the above

Last Answer : All of the above

Choose the optical fibre material from the given materials. a) Glass b) Plastic c) Silica d) Quartz

Description : Choose the optical fibre material from the given materials. a) Glass b) Plastic c) Silica d) Quartz

Last Answer : c) Silica

Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming

__________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Description : __________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Last Answer : (C) Bakelite

Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Description : Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Last Answer : (B) Engineering plastic

Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Last Answer : (C) Cast iron

Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming