Large scale fire on fuel gas line is normally extinguished by (A) Water (B) Steam (C) Foam (D) Nitrogen

Large scale fire on fuel gas line is normally extinguished by (A) Water
(B) Steam
(C) Foam
(D) Nitrogen
by

1 Answer

Answer :

(D) Nitrogen
by

Related questions

Fire in fuel gas pipelines is extinguished most effectively by (A) Spraying water (B) Blanketting the area with nitrogen atmosphere (C) Fire fighting foam (D) None of these

Description : Fire in fuel gas pipelines is extinguished most effectively by (A) Spraying water (B) Blanketting the area with nitrogen atmosphere (C) Fire fighting foam (D) None of these

Last Answer : Option B

Water Pour Of kerosene Fire Extinguished Goes No , because What ?

Last Answer : Kerosene Of water Than Light Says.

Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by water (3) The heat required for combustion of petrol is very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Description : Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Last Answer : (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns Explanation: Water is not effective on petrol fire because it has higher density than ... while petrol stays afloat and keeps burning. Petrochemical fires are nearly always extinguished with chemical foam.

Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by water (3) The heat required for combustion of petrol is very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Description : Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Last Answer : (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns Explanation: Water is not effective on petrol fire because it has higher density than petrol as a ... extinguished with chemical foam which forms a blanket over the flames and cuts off the oxygen supply.

Sodium fire in laboratory should not be extinguished by pouring water.Why?

Description : Sodium fire in laboratory should not be extinguished by pouring water.Why?

Last Answer : Ans. Sodium reacts violently with water producing hydrogen gas which also catches fire.Instead of water pyrene should be used.

Why is water not suitable for putting out a petrol fire ? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by water (3) The heat required for combustion of petrol is very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Description : Why is water not suitable for putting out a petrol fire ? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns 

Last Answer : Water, being heavy, slips below petrol which thus remains in contact with air and burns

Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are normally carried out at about __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Description : Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are ... __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Last Answer : (B) 900-1000

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

Presence of non-biodegradable substances, like alkyl benzene sulphonate (ABS) from the detergents in polluted water stream causes (A) Fire hazards (B) Explosion hazards (C) Persistent foam (D) Depletion of dissolved oxygen

Description : Presence of non-biodegradable substances, like alkyl benzene sulphonate (ABS) from the detergents in polluted water stream causes (A) Fire hazards (B) Explosion hazards (C) Persistent foam (D) Depletion of dissolved oxygen

Last Answer : (C) Persistent foam

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Commercial scale production of hydrogen from iron-steam reaction represented by, 3Fe + 3H2O = Fe3O4 + 4H2 , is not practised, as it is (A) A slow reaction (B) A discontinuous reaction (requiring regeneration of iron by water gas intermittently) (C) Still in development stage (by employing fluidised bed technique) (D) All (A), (B) and (C)

Description : Commercial scale production of hydrogen from iron-steam reaction represented by, 3Fe + 3H2O = Fe3O4 + 4H2 , is not practised, as it is (A) A slow reaction (B) A discontinuous reaction (requiring regeneration of ... in development stage (by employing fluidised bed technique) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Description : Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Last Answer : (C) Electrolysis of water

The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during feed water treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Description : The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during ... treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Last Answer : (C) Release of non-condensable gas from water in the boiler

Why are water and foam fire extinguishers unsuitable for electrical fires?

Description : Why are water and foam fire extinguishers unsuitable for electrical fires?

Last Answer : What is the answer ?

I wear a huge dark cloak, not unlike the one of a wizard, I am the opposite of warm, I don't walk-I float, I prefer to be sad, not happy. I appear in clouds, not in the sky, I can only be extinguished by a happy spell, I will take your soul, if you cross my path. I am a foul creature, amongst the foulest, you might call me a light extinguisher. What am I? -Riddles

Description : I wear a huge dark cloak, not unlike the one of a wizard, I am the opposite of warm, I don't walk-I float, I prefer to be sad, not happy. I appear in clouds, not in the sky, I can only ... path. I am a foul creature, amongst the foulest, you might call me a light extinguisher. What am I? -Riddles

Last Answer : A dementor from Harry Potter.

A lighted candle gets extinguished when covered with a tumbler. Why? -Do You Know?

Description : A lighted candle gets extinguished when covered with a tumbler. Why? -Do You Know?

Last Answer : answer:

A lighted candle gets extinguished when covered with a tumbler. Why?

Description : A lighted candle gets extinguished when covered with a tumbler. Why?

Last Answer : Because of inadequate supply of air

Furnace pressure is normally controlled by regulating the (A) Air pressure (B) Fuel gas pressure (C) Speed of I.D. fan (D) Damper

Description : Furnace pressure is normally controlled by regulating the (A) Air pressure (B) Fuel gas pressure (C) Speed of I.D. fan (D) Damper

Last Answer : (D) Damper

__________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Description : __________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Last Answer : (A) Nitrogen

Which chemical is used in foam fire extinguishers? -Do You Know?

Description : Which chemical is used in foam fire extinguishers? -Do You Know?

Last Answer : Chemical foam extinguisher – The chemicals used in this foam type fire extinguisher are sodium bicarbonate and aluminium sulphate

Which type of fire extinguisher is used for petroleum fire? (1) Foam type (2) Soda acid type (3) Powder type (4) None of these

Description : Which type of fire extinguisher is used for petroleum fire? (1) Foam type (2) Soda acid type (3) Powder type (4) None of these

Last Answer : (1) Foam type Explanation: Foam type fire extinguishers are suitable for fires that involve flammable or combustible liquids, including petrol, grease, and oil. They are applied to fuel fires as ... seal over the fuel, preventing oxygen reaching it. Powder types are useful for combustible metals.

Which type of fire extinguisher is used for petroleum fire? (1) Foam type (2) Soda acid type (3) Powder type (4) None of these

Description : Which type of fire extinguisher is used for petroleum fire? (1) Foam type (2) Soda acid type (3) Powder type (4) None of these

Last Answer : (3) Powder type

Which chemical is used in foam fire extinguishers?

Description : Which chemical is used in foam fire extinguishers?

Last Answer : Aluminium sulphate

How foam is used in a fire?

Description : How foam is used in a fire?  

Last Answer : Foam is used as a blanketing effect in a fire.  

1. Which chemical is used in foam fire extinguishers? 2. Where is the headquarters of World Health Organization? 3. By whom was concept of Five Year Plans in India introduced? 4. West Bengal shares boundaries with how many foreign countries? 5. Who was the successor of Shivaji ?

Description : 1. Which chemical is used in foam fire extinguishers? 2. Where is the headquarters of World Health Organization? 3. By whom was concept of Five Year Plans in India introduced? 4. West Bengal shares ... Which is not a plantation crop? 20. By whom was first women's university in India was founded?

Last Answer : Answer : 1. Aluminium sulphate 2. Geneva, Switzerland 3. Jawaharlal Nehru 4. Three 5. Sambhaji 6. Hypothalmus 7. Direct elections 8. Oscillator 9. Punjab 10. Henry Vivian Derozio 11. Ranjita Biswas ... A Chairman and three other members 17. Silver 18. Increase 19. Sugarcane 20. Dhondo Keshave Karve

Which type of fire extinguisher is used for petroleum fire ? (1) Foam type (2) Soda acid type (3) Powder type (4) None of these

Description : Which type of fire extinguisher is used for petroleum fire ? (1) Foam type (2) Soda acid type (3) Powder type (4) None of these

Last Answer : Foam type

Steam is intermittently admitted into the fuel bed during the production of producer gas to (A) Convert CO to CO2 (B) Increase the combustion rate (C) Increase the gas production rate (D) Minimise the chances of clinker formation

Description : Steam is intermittently admitted into the fuel bed during the production of producer gas to (A) Convert CO to CO2 (B) Increase the combustion rate (C) Increase the gas production rate (D) Minimise the chances of clinker formation

Last Answer : (D) Minimise the chances of clinker formation

White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Description : White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Last Answer : (B) Coke oven gas

Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Description : Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Last Answer : (C) Partial oxidation

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

__________ calorimeter is normally used for measuring the dryness fraction of steam, when it is very low. (A) Bucket (B) Throttling (C) Separating (D) A combination of separating & throttling

Description : __________ calorimeter is normally used for measuring the dryness fraction of steam, when it is very low. (A) Bucket (B) Throttling (C) Separating (D) A combination of separating & throttling

Last Answer : (D) A combination of separating & throttling

Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that (A) Pure oxygen has been used for combustion (B) Nitrogen percentage in the fuel is very high (C) Excess air has been used for combustion (D) Hydrogen is not present in the fuel

Description : Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that (A) Pure oxygen has been used for combustion ... very high (C) Excess air has been used for combustion (D) Hydrogen is not present in the fuel

Last Answer : (C) Excess air has been used for combustion

The principal volcanic gas (in terms of quantity) is: w) carbon dioxide x) nitrogen dioxide y) sulfur dioxide z) steam (H2O)

Description : The principal volcanic gas (in terms of quantity) is: w) carbon dioxide x) nitrogen dioxide y) sulfur dioxide z) steam (H2O)

Last Answer : ANSWER: Z -- STEAM (H2O)

Function of fusible plug in a boiler is to (A) Drain out water and sludge from the boiler during repair (B) Put off fire in the furnace when water level in the boiler falls to unsafe limit (C) Guard the boiler in case of abnormal rise in steam pressure (D) All (A), (B) & (C)

Description : Function of fusible plug in a boiler is to (A) Drain out water and sludge from the boiler during repair (B) Put off fire in the furnace when water level in the boiler falls to unsafe limit (C) Guard the boiler in case of abnormal rise in steam pressure (D) All (A), (B) & (C)

Last Answer : (B) Put off fire in the furnace when water level in the boiler falls to unsafe limit

Blow off cock is provided in steam boiler to (A) Guard the boiler in case of abnormal rise in steam pressure (B) Drain out water and sludge during its repair (C) Regulate the supply of water in boiler (D) Put out the fire in the furnace when the water level in the boiler falls to unsafe limit

Description : Blow off cock is provided in steam boiler to (A) Guard the boiler in case of abnormal rise in steam pressure (B) Drain out water and sludge during its repair (C) Regulate the supply of water in boiler (D) Put out the fire in the furnace when the water level in the boiler falls to unsafe limit

Last Answer : (B) Drain out water and sludge during its repair

. Potable water means the water used for (A) Fire-fighting (B) Cooling (C) Drinking (D) Evaporation to produce steam

Description : . Potable water means the water used for (A) Fire-fighting (B) Cooling (C) Drinking (D) Evaporation to produce steam

Last Answer : (C) Drinking

Priming in a distillation column (A) Results from very low gas velocity (B) Is desirable from point efficiency consideration (C) Is characterised by the presence of foam throughout the space between trays (D) Reduces the overall pressure drop

Description : Priming in a distillation column (A) Results from very low gas velocity (B) Is desirable from point efficiency consideration (C) Is characterised by the presence of foam throughout the space between trays (D) Reduces the overall pressure drop

Last Answer : (C) Is characterised by the presence of foam throughout the space between trays

A fire tube boiler is limited to a maximum steam pressure of about __________ kg/cm2. (A) 6 (B) 18 (C) 38 (D) 52

Description : A fire tube boiler is limited to a maximum steam pressure of about __________ kg/cm2. (A) 6 (B) 18 (C) 38 (D) 52

Last Answer : (B) 18

Does anyone know where I can buy a large amount of Scotch Foam Mounting Tape?

Description : Does anyone know where I can buy a large amount of Scotch Foam Mounting Tape?

Last Answer : http://www.save-on-crafts.com/mountingtape.html, http://www.mpsupplies.com/3mtape4000series.html, http://www.uline.com/Browse_Listing_6015.asp

A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam in a boiler (C) Pressurised water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Description : A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam ... water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Last Answer : (A) Coolant water is allowed to boil in the core of the reactor

'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost. (A) 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Last Answer : (B) 10 to 20

The amount of water evaporated in kg per kg of fuel burnt in a boiler is called the __________ of a boiler. (A) Evaporative capacity (B) Evaporation efficiency (C) Thermal efficiency (D) Steam load

Description : The amount of water evaporated in kg per kg of fuel burnt in a boiler is called the __________ of a boiler. (A) Evaporative capacity (B) Evaporation efficiency (C) Thermal efficiency (D) Steam load

Last Answer : (A) Evaporative capacity

Which gas is used in fire extinguishers? (1) Carbon dioxide (2) Nitrogen oxide (3) Carbon monoxide (4) Sulpher dioxide

Description : Which gas is used in fire extinguishers? (1) Carbon dioxide (2) Nitrogen oxide (3) Carbon monoxide (4) Sulpher dioxide

Last Answer : (1) Carbon dioxide Explanation: Sodium bicarbonate, regular or ordinary used on class B and C fires, was the first of the dry chemical agents developed. In the heat of a fire, it releases a cloud of carbon dioxide that smothers the fire.

The gas used to extinguish fire is – (1) Neon (2) Nitrogen (3) Carbon dioxide (4) Carbon monoxide

Description : The gas used to extinguish fire is – (1) Neon (2) Nitrogen (3) Carbon dioxide (4) Carbon monoxide

Last Answer : (3) Carbon dioxide Explanation: Fires require these 3 things: a fuel (a hydrocarbon, which is a compound containing only carbon and hydrogen), a source of oxygen, and heal. Carbon Dioxide is most commonly used to extinguish fire as it displaces wwgen, thus choking the very source of a fire.

The gas used to extinguish fire is (1) Neon (2) Nitrogen (3) Carbon dioxide (4) Carbon monoxide

Description : The gas used to extinguish fire is (1) Neon (2) Nitrogen (3) Carbon dioxide (4) Carbon monoxide

Last Answer : Carbon monoxide

Which of the following is normally not found in both the S.I. (petrol) & C.I. (diesel) engines? (A) Air filter (B) Fuel injector (C) Exhaust silencer (D) Battery

Description : Which of the following is normally not found in both the S.I. (petrol) & C.I. (diesel) engines? (A) Air filter (B) Fuel injector (C) Exhaust silencer (D) Battery

Last Answer : Option B

__________ temperature scale assigns 0° to the 'ice point' and 80° to the 'steam point'. (A) Celsius (B) Rankine (C) Reaumur (D) Fahrenheit

Description : __________ temperature scale assigns 0° to the 'ice point' and 80° to the 'steam point'. (A) Celsius (B) Rankine (C) Reaumur (D) Fahrenheit

Last Answer : (C) Reaumur