Function of fusible plug in a boiler is to (A) Drain out water and sludge from the boiler during repair (B) Put off fire in the furnace when water level in the boiler falls to unsafe limit (C) Guard the boiler in case of abnormal rise in steam pressure (D) All (A), (B) & (C)

Function of fusible plug in a boiler is to
(A) Drain out water and sludge from the boiler during repair
(B) Put off fire in the furnace when water level in the boiler falls to unsafe limit
(C) Guard the boiler in case of abnormal rise in steam pressure (D) All (A), (B) & (C)
by

1 Answer

Answer :

(B) Put off fire in the furnace when water level in the boiler falls to unsafe limit
by

Related questions

Blow off cock is provided in steam boiler to (A) Guard the boiler in case of abnormal rise in steam pressure (B) Drain out water and sludge during its repair (C) Regulate the supply of water in boiler (D) Put out the fire in the furnace when the water level in the boiler falls to unsafe limit

Description : Blow off cock is provided in steam boiler to (A) Guard the boiler in case of abnormal rise in steam pressure (B) Drain out water and sludge during its repair (C) Regulate the supply of water in boiler (D) Put out the fire in the furnace when the water level in the boiler falls to unsafe limit

Last Answer : (B) Drain out water and sludge during its repair

. Name the safety device used to protect the boiler, when the water level falls below a minimum level. (A) Blow down valve (B) Blow off cock (C) Fusible plug (D) Safety valve

Description : . Name the safety device used to protect the boiler, when the water level falls below a minimum level. (A) Blow down valve (B) Blow off cock (C) Fusible plug (D) Safety valve

Last Answer : (C) Fusible plug

Low water in boiler drum is unsafe because it may result in overheating of water tubes in furnace. Why it is unsafe to have high water condition in boiler drum ?

Description : Low water in boiler drum is unsafe because it may result in overheating of water tubes in furnace. Why it is unsafe to have high water condition in boiler drum ?

Last Answer : High drum level does not allow steam separation to be effective and some water can be carried over with steam which is not desirable for steam turbine.

Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Description : Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Last Answer : (C) Storage tank for storing brine and caustic soda

Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Last Answer : (C) Salt bath furnace

A -________ incorporates a firebox or furnace in order to burn the fuel and _________ heat. a. Boiler, generate b. Heat, boiler c. Steam, pressure d. None

Description : A -________ incorporates a firebox or furnace in order to burn the fuel and _________ heat. a. Boiler, generate b. Heat, boiler c. Steam, pressure d. None

Last Answer : a. Boiler, generate

A fire tube boiler is limited to a maximum steam pressure of about __________ kg/cm2. (A) 6 (B) 18 (C) 38 (D) 52

Description : A fire tube boiler is limited to a maximum steam pressure of about __________ kg/cm2. (A) 6 (B) 18 (C) 38 (D) 52

Last Answer : (B) 18

White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Description : White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Last Answer : (B) Coke oven gas

Which of the following is not a recuperative furnace? (A) Soaking pit (B) Reheating furnace(C) Steam boiler(D) Coke oven

Description : Which of the following is not a recuperative furnace? (A) Soaking pit (B) Reheating furnace (C) Steam boiler (D) Coke oven

Last Answer : (D) Coke oven

Which type of boiler is used critical pressure……….. A. Benson boiler. B. Water tube boiler. C. Fire tube. D. Steam boiler

Description : Which type of boiler is used critical pressure……….. A. Benson boiler. B. Water tube boiler. C. Fire tube. D. Steam boiler

Last Answer : A. Benson boiler

The temperature of boiling water in a steam engine may be high because : (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the fire is at very high temperature

Description : The temperature of boiling water in a steam engine may be high because : (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the fire is at very high temperature

Last Answer :  there is high pressure inside the boiler

Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) Requirement of large volume combustion chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Description : Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) ... chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Last Answer : (B) Risk of explosion

If an electrical heater has three heating elements connected in parallel why does each element have its own fusible link and limit switch?

Description : If an electrical heater has three heating elements connected in parallel why does each element have its own fusible link and limit switch?

Last Answer : What is the answer ?

Where is water steam separator drum located in Lamont boiler ? a. Inside of the boiler b. Right above the furnace c. Before the feed water pump d. Outside the boiler

Description : Where is water steam separator drum located in Lamont boiler ? a. Inside of the boiler b. Right above the furnace c. Before the feed water pump d. Outside the boiler

Last Answer : d. Outside the boiler

Heat transfer to the water wall in a high pressure water wall type boiler furnace is mainly by (A) Conduction (B) Convection (C) Radiation (D) Both 'a' & 'b'

Description : Heat transfer to the water wall in a high pressure water wall type boiler furnace is mainly by (A) Conduction (B) Convection (C) Radiation (D) Both 'a' & 'b'

Last Answer : Option C

A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. • Steam • Boiler • Hydrogen • None

Description : A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. • Steam • Boiler • Hydrogen • None

Last Answer : • Boiler

A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. A Steam B Boiler C Hydrogen D None

Description : A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. A Steam B Boiler C Hydrogen D None

Last Answer : B Boiler

Is it unsafe to plug a power strip into an extension cord permanently?

Description : Is it unsafe to plug a power strip into an extension cord permanently?

Last Answer : Its unsafe. If you need power permanently you need to run to run a new box and receptacle off a pre-existing circuit. You might need to run a whole new circuit and add a new breaker in your electrical panel if what your using requires more juice than a pre-existing circuit can safely handle.

A simple steam engine receives steam from the boiler at 180˚C and exhausts directly into the air at 100˚C. What is the upper limit of its efficiency?  a. 11.28 %  b. 36.77 %  c. 20.36 %  d. 17.66 %

Description : A simple steam engine receives steam from the boiler at 180˚C and exhausts directly into the air at 100˚C. What is the upper limit of its efficiency?  a. 11.28 %  b. 36.77 %  c. 20.36 %  d. 17.66 %

Last Answer : 17.66 %

The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during feed water treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Description : The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during ... treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Last Answer : (C) Release of non-condensable gas from water in the boiler

Which of the following is not a result of the excess of impurity in boiler-feed. a) Scale and sludge formation b) Decomposition c) Corrosion, priming and foaming d) Caustic embrittlement

Description : Which of the following is not a result of the excess of impurity in boiler-feed. a) Scale and sludge formation b) Decomposition c) Corrosion, priming and foaming d) Caustic embrittlement

Last Answer : b) Decomposition

In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Description : In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Last Answer : (C) Combustion of coal by supplying it around the burner

In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Description : In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Last Answer : (C) Combustion of coal by supplying it around the burner

What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Description : What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Last Answer : • To generate steam at constant pressure

The function of an economiser in a boiler is to preheat the (A) Feedwater (B) Combustion air (C) Pulverised coal (D) Furnace oil

Description : The function of an economiser in a boiler is to preheat the (A) Feedwater (B) Combustion air (C) Pulverised coal (D) Furnace oil

Last Answer : (A) Feedwater

Design of waste heat boiler for recovery of waste heat from furnace gases depends upon the(A) Quantity & temperature of waste gas(B) Dust concentration & nature of dust in waste gas(C) Corrosive nature of the waste gas(D) All (A), (B) and (C)

Description : Design of waste heat boiler for recovery of waste heat from furnace gases depends upon the (A) Quantity & temperature of waste gas (B) Dust concentration & nature of dust in waste gas (C) Corrosive nature of the waste gas (D) All (A), (B) and (C)

Last Answer : (B) Dust concentration & nature of dust in waste gas

Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Description : Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Last Answer : (A) Blast furnace stove

Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven(B) Blast furnace stoves(C) Beehive coke oven(D) High pressure boiler

Description : Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven (B) Blast furnace stoves (C) Beehive coke oven (D) High pressure boiler

Last Answer : (D) High pressure boiler

Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water(B) Cooling and freezing of water kills the bacteria present in it(C) With increasing boiler operating pressure of steam, the maximumallowable concentration of silica in feed water goes on decreasing(D) Dissolved oxygen content in high pressure boiler feed water should benil

Description : Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water (B) Cooling and freezing of water kills the ... goes on decreasing (D) Dissolved oxygen content in high pressure boiler feed water should be nil

Last Answer : (B) Cooling and freezing of water kills the bacteria present in it

The delivery pressure of boiler feed water pump compared to the boiler steam pressure is (A) Same (B) Slightly less (C) Slightly more (D) Much more

Description : The delivery pressure of boiler feed water pump compared to the boiler steam pressure is (A) Same (B) Slightly less (C) Slightly more (D) Much more

Last Answer : (C) Slightly more

high pressure boiler generates steam at a pressure greater than __________ kg/cm2. (A) 10 (B) 30 (C) 50 (D) 80

Description : high pressure boiler generates steam at a pressure greater than __________ kg/cm2. (A) 10 (B) 30 (C) 50 (D) 80

Last Answer : Option D

In Drum type Boiler Feed water flow control by Three element controller a. Drum level b. Steam Flow c. Feed water flow d. All of above

Description : In Drum type Boiler Feed water flow control by Three element controller a. Drum level b. Steam Flow c. Feed water flow d. All of above

Last Answer : Ans:- d. All of above

nswer: Option B 559. Heat release during phase change is observed in case of a/an (A) Boiler (B) Condenser (C) Evaporator (D) All (A), (B) & (C)

Description : nswer: Option B 559. Heat release during phase change is observed in case of a/an (A) Boiler (B) Condenser (C) Evaporator (D) All (A), (B) & (C)

Last Answer : (B) Condenser

What Size of 2014 Chevy Cruz drain plug?

Description : What Size of 2014 Chevy Cruz drain plug?

Last Answer : Feel Free to Answer

The temperature of boiling water in a steam engine may be high because - (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the lire is at very high temperature

Description : The temperature of boiling water in a steam engine may be high because - (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the lire is at very high temperature

Last Answer : (3) there is high pressure inside the boiler Explanation: In the boiler of a steam engine, there is a firebox where coal is shoveled into. The coal is kept burning at a very high temperature, and ... reservoir; the steam is then controlled by a slide valve to move into a cylinder to push the piston.

In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas

Description : In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas

Last Answer : (A) Fusion of coal ash & clinker formation

Which of the following is not a continuous waste heat recovery equipment from the flue gases going out of furnace? (A) Economiser (B) Regenerator (C) Ceramic recuperator (D) Waste heat boiler

Description : Which of the following is not a continuous waste heat recovery equipment from the flue gases going out of furnace? (A) Economiser (B) Regenerator (C) Ceramic recuperator (D) Waste heat boiler

Last Answer : (B) Regenerator

The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None

Description : The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None

Last Answer : a. Steam

In a Rankine cycle, with the maximum steam temperature being fixed from metallurgical considerations, as the boiler pressure increases (a) The condenser load will increase [IES-1997] (b) The quality of turbine exhaust will decrease (c) The quality of turbine exhaust will increase (d) The quality of turbine exhaust will remain unchanged

Description : In a Rankine cycle, with the maximum steam temperature being fixed from metallurgical considerations, as the boiler pressure increases (a) The condenser load will increase [IES-1997] (b) The ... The quality of turbine exhaust will increase (d) The quality of turbine exhaust will remain unchanged

Last Answer : (b) The quality of turbine exhaust will decrease 

In a Rankine cycle, regeneration results in higher efficiency because (a) Pressure inside the boiler increases [GATE-2003] (b) Heat is added before steam enters the low pressure turbine (c) Average temperature of heat addition in the boiler increases (d) Total work delivered by the turbine increases

Description : In a Rankine cycle, regeneration results in higher efficiency because (a) Pressure inside the boiler increases [GATE-2003] (b) Heat is added before steam enters the low pressure turbine (c) ... temperature of heat addition in the boiler increases (d) Total work delivered by the turbine increases 

Last Answer : (c) Average temperature of heat addition in the boiler increases  

Steam is generated in a _____ boiler at a pressure above the critical point. a) Simple b) once through c) Superficial d) thrice through

Description : Steam is generated in a _____ boiler at a pressure above the critical point. a) Simple b) once through c) Superficial d) thrice through

Last Answer : c) Superficial

The pressure of steam in the engine cylinder at the beginning of the stroke is ________ the boiler pressure. (A) Equal to (B) Less than (C) Higher than (D) None of these

Description : The pressure of steam in the engine cylinder at the beginning of the stroke is ________ the boiler pressure. (A) Equal to (B) Less than (C) Higher than (D) None of these

Last Answer : (B) Less than

What increase as steam pressure increase inside a boiler • Force • Density • Rate of steam conversion • Viscosity

Description : What increase as steam pressure increase inside a boiler • Force • Density • Rate of steam conversion • Viscosity

Last Answer : • Density

What is the main component in a boiler a) steam b) heat c) pressure condenser d) combination

Description : What is the main component in a boiler a) steam b) heat c) pressure condenser d) combination

Last Answer : a) steam

An economiser in a boiler........ A]Increases steam pressure. B]Increases steam flow C]Decreases fuel consumption D]Decreases steam pressure

Description : An economiser in a boiler........ A]Increases steam pressure. B]Increases steam flow C]Decreases fuel consumption D]Decreases steam pressure

Last Answer : C]Decreases fuel consumption

Which furnace employs natural draft? (A) Coke oven (B) Boiler (C) Rotary kilns (D) L.D. converter

Description : Which furnace employs natural draft? (A) Coke oven (B) Boiler (C) Rotary kilns (D) L.D. converter

Last Answer : (A) Coke oven

Which of the following furnaces will have maximum thermal efficiency? (A) Soaking pits (B) Walking beam reheating furnace (C) Boiler furnace (D) Rotary kilns

Description : Which of the following furnaces will have maximum thermal efficiency? (A) Soaking pits (B) Walking beam reheating furnace (C) Boiler furnace (D) Rotary kilns

Last Answer : (C) Boiler furnace

Which is the most thermally efficient furnace? (A) Reheating furnace (B) Reverberatory furnace (C) Rotary kilns (D) Boiler furnace

Description : Which is the most thermally efficient furnace? (A) Reheating furnace (B) Reverberatory furnace (C) Rotary kilns (D) Boiler furnace

Last Answer : (D) Boiler furnace

Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Description : Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Last Answer : (B) Pulverised coking coal