Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process? (A) Galvanising (B) Tinning (C) Sherardizing (D) None of these

Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process?
(A) Galvanising
(B) Tinning
(C) Sherardizing
(D) None of these
by

1 Answer

Answer :

(C) Sherardizing
by

Related questions

The coating of a thin layer of zinc on steel or iron objects is known as – (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Description : The coating of a thin layer of zinc on steel or iron objects is known as – (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Last Answer : (3) Galvanising Explanation: Galvanization is the process of applying a protective zinc coating to steel or iron, in order to prevent rusting. Although galvanization can be done with electrochemical and ... is hot-dip galvanization, in which steel parts are submerged in a bath of molten zinc.

The coating of a thin layer of zinc on steel or iron objects is known as (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Description : The coating of a thin layer of zinc on steel or iron objects is known as (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Last Answer : Galvanising

Write two points of similarity between sherardizing and galvanising process.

Description : Write two points of similarity between sherardizing and galvanising process.

Last Answer : 1) Sherardizing and galvanizing are the processes of avoiding corrosion of metal. 2) Zinc is used as coating metal on iron base metal.

Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

__________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Last Answer : (D) Calorising

Galvanising is not a zinc diffusion process. A zinc diffusion process istermed as(A) Sherardizing(B) Parkerising(C) Anodising(D) None of these

Description : Galvanising is not a zinc diffusion process. A zinc diffusion process istermed as (A) Sherardizing (B) Parkerising (C) Anodising (D) None of these

Last Answer : (A) Sherardizing

Sherardizing process is used for (A) Surface coating (B) Heat treatment of high speed steel (C) Cold working on metals (D) None of these

Description : Sherardizing process is used for (A) Surface coating (B) Heat treatment of high speed steel (C) Cold working on metals (D) None of these

Last Answer : (A) Surface coating

How many of the following metals can be extracted buy carbon reduction method ? Na,Al,Mg,Sn,Fe,Pb,Zn,Ca

Description : How many of the following metals can be extracted buy carbon reduction method ? Na,Al,Mg,Sn,Fe,Pb,Zn,Ca

Last Answer : How many of the following metals can be extracted buy carbon reduction method ? Na,Al,Mg,Sn,Fe,Pb,Zn,Ca

Among the metals Na,Mg ,Al,Zn,Cu,Sn ,Fe and Pb number of metals that can be ectreated by the eletroysis ,even from aqueos solution,is………………….

Description : Among the metals Na,Mg ,Al,Zn,Cu,Sn ,Fe and Pb number of metals that can be ectreated by the eletroysis ,even from aqueos solution,is………………….

Last Answer : Among the metals Na,Mg ,Al,Zn,Cu,Sn ,Fe and Pb number of metals that can be ectreated by the eletroysis ,even from aqueos solution,is………………….

Number of metals among following which are obatained by electromentallurgy in molten state are Li, Ba, Na,Al, Fe, Cu, Pb, Sn, Ag, Zn, Ca, Mg.

Description : Number of metals among following which are obatained by electromentallurgy in molten state are Li, Ba, Na,Al, Fe, Cu, Pb, Sn, Ag, Zn, Ca, Mg.

Last Answer : Number of metals among following which are obatained by electromentallurgy in molten state are Li, Ba, Na,Al, Fe, Cu, Pb, Sn, Ag, Zn, Ca, Mg.

Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Description : Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Last Answer : (C) Low carbon steels

The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Description : The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Last Answer : (B) Galvanising

Which of the following is a low melting point metal? (A) Stainless steel (B) Wrought iron (C) Tin (D) Copper

Description : Which of the following is a low melting point metal? (A) Stainless steel (B) Wrought iron (C) Tin (D) Copper

Last Answer : (C) Tin

_____ is the process of coating Zinc by hot dipping

Last Answer : Galvanizing is the process of coating Zinc by hot dipping 

Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________ gms of zinc per m2 of steel strip. (A) 5-10 (B) 1000-1500 (C) 120-500 (D) 1500-3000

Description : Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________ gms of zinc per m2 of steel strip. (A) 5-10 (B) 1000-1500 (C) 120-500 (D) 1500-3000

Last Answer : Option C

Tin coating is not done by (A) Vaporising (B) Hot dipping (C) Electro deposition (D) Spraying

Description : Tin coating is not done by (A) Vaporising (B) Hot dipping (C) Electro deposition (D) Spraying

Last Answer : (A) Vaporising

Tin coating on metals is not done by (A) Spraying (B) Powder metallurgy (C) Hot dipping (D) Electro-deposition

Description : Tin coating on metals is not done by (A) Spraying (B) Powder metallurgy (C) Hot dipping (D) Electro-deposition

Last Answer : (B) Powder metallurgy

Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Description : Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Last Answer : (A) Melts below the melting points of base metals

Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Description : Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Last Answer : (B) Low carbon steel

Various fungi are known to accumulate considerable quantities of divalent metals, e.g. (a) Cd (b) Zn (d) All of these (c) Pb

Description : Various fungi are known to accumulate considerable quantities of divalent metals, e.g. (a) Cd (b) Zn (d) All of these (c) Pb

Last Answer : Ans. ((d))

The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Description : The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Last Answer : Ans:(b)

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'

Description : Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'

Last Answer : Answer: B

German Silver is an alloy of------? A. Zn + Ni B. Cu + Zn C. Cu + Ni (Answer) D. Cu + Sn E. None of these

Description : German Silver is an alloy of------? A. Zn + Ni B. Cu + Zn C. Cu + Ni (Answer) D. Cu + Sn E. None of these

Last Answer : C. Cu + Ni (Answer)

Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Description : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Last Answer : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Description : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Last Answer : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

`Pb` and `Sn` are exerted from their chief ores by:

Description : `Pb` and `Sn` are exerted from their chief ores by:

Last Answer : `Pb` and `Sn` are exerted from their chief ores by: A. Carbon reduction and self ... and self reduction D. Self reduction and electrolysis

Brass is an alloy of : (1) Cu, Al and Zn (2) Cu and Sn (3) Cu and Zn (4) Al and Mg

Description : Brass is an alloy of : (1) Cu, Al and Zn (2) Cu and Sn (3) Cu and Zn (4) Al and Mg

Last Answer : (3) Cu and Zn Explanation: Brass is an alloy made of copper and zinc. The proportions of zinc and copper can be varied to cre-ate a range of brasses with varying properties. By comparison, bronze is principally an alloy of copper and tin.

Brass is an alloy of : (1) Cu, Al and Zn (2) Cu and Sn (3) Cu and Zn (4) Al and Mg

Description : Brass is an alloy of : (1) Cu, Al and Zn (2) Cu and Sn (3) Cu and Zn (4) Al and Mg

Last Answer : Cu and Zn

A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Description : A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Last Answer : (A) More corrosion resistant

Case hardening is not done by (A) Nitriding (B) Hot dipping (C) Electroplating (D) Both ‘b’ & ‘c’

Description : Case hardening is not done by (A) Nitriding (B) Hot dipping (C) Electroplating (D) Both ‘b’ & ‘c’

Last Answer : Option D

Which of the following is false? (a) Mica is usually found in metamorphic and igneous rocks (b) Aluminium has the advantage over iron as it is resistant to corrosion (c) line is mostly used in galvanising iron and steel goods (d) Manganese is largely used in making fertilizers

Description : Which of the following is false? (a) Mica is usually found in metamorphic and igneous rocks (b) Aluminium has the advantage over iron as it is resistant to corrosion (c) line is mostly used in galvanising iron and steel goods (d) Manganese is largely used in making fertilizers

Last Answer : Ans: (d)

Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials (C) Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Last Answer : Option D

The metal chiefly used for galvanising iron is : (1) Zinc (2) Mercury (3) Cadmium (4) Tin

Description : The metal chiefly used for galvanising iron is : (1) Zinc (2) Mercury (3) Cadmium (4) Tin 

Last Answer : Zinc

Identify the type of reaction(s) in the following equations. (i)CH4 + 2O2 CO2 + 2 H2O (ii) Pb(NO3)2 + 2KI ——–>Pbl2 + 2KNOs (iii) CaO + H2O ——–> Ca(OH)2 (iv) CuSO4 + Zn ——–> ZnSO4 + Cu -Chemistry

Description : Identify the type of reaction(s) in the following equations. (i)CH4 + 2O2 CO2 + 2 H2O (ii) Pb(NO3)2 + 2KI ——–>Pbl2 + 2KNOs (iii) CaO + H2O ——–> Ca(OH)2 (iv) CuSO4 + Zn ——–> ZnSO4 + Cu -Chemistry

Last Answer : Answer. (i) Combustion reaction and oxidation reaction. (ii)Double displacement reaction and precipitation reaction. (iii) Combination reaction. (iv) Displacement reaction.

Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points

The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Description : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Last Answer : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` ... +Zn rarr Mg+ZnO` D. `ZnO+Mg rarrZn+MgO`

The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Description : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Last Answer : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a ... gt 500^(@)C " but " lt 1000^(@)C`

The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Description : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Last Answer : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a ... C. `500^(@)C` D. `1200^(@)C`

Lead pipe is (A) Especially resistant to solutions containing H2SO4 (B) Usually joined by burning (e.g. by melting to adjacent pieces with a torch) (C) Having very low elastic limit resulting in permanent deformation from either mechanical or thermal strain (D) All (A), (B) and (C)

Description : Lead pipe is (A) Especially resistant to solutions containing H2SO4 (B) Usually joined by burning (e.g. by melting to adjacent pieces with a torch) (C) Having very low elastic limit resulting in permanent deformation from either mechanical or thermal strain (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C

The main purpose of galvanising iron sheets is to (A) Harden the surface (B) Increase its glossiness and lustre (C) Prevent the action of water (D) Prevent the action of oxygen

Description : The main purpose of galvanising iron sheets is to (A) Harden the surface (B) Increase its glossiness and lustre (C) Prevent the action of water (D) Prevent the action of oxygen

Last Answer : (C) Prevent the action of water

Which has the maximum melting point out of the following? (A) Steel (B) Cast iron (C) Stainless steel (D) Wrought iron

Description : Which has the maximum melting point out of the following? (A) Steel (B) Cast iron (C) Stainless steel (D) Wrought iron

Last Answer : (D) Wrought iron

Which of the following will have the highest melting point? (A) Pig iron (B) Mild steel (C) Wrought iron (D) High carbon stee

Description : Which of the following will have the highest melting point? (A) Pig iron (B) Mild steel (C) Wrought iron (D) High carbon stee

Last Answer : (C) Wrought iron

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

Describe the tinning process. Write its two applications.

Description : Describe the tinning process. Write its two applications.

Last Answer : Tinning: -The process of covering iron or steel sheets with a thin coat of tin to prevent it from rusting is called as tinning.   Process: i) The sheet of steel to be ... Tinned copper sheets are used for cooking utensils and refrigeration equipment. Cu tubes are used in refrigeration. 

Acetylene gas holder is made of (A) Copper (B) Cast iron (C) Steel (D) Monel metal

Description : Acetylene gas holder is made of (A) Copper (B) Cast iron (C) Steel (D) Monel metal

Last Answer : (C) Steel

State the two methods of Hot dipping.

Description : State the two methods of Hot dipping. 

Last Answer : Two methods of hot dipping-1. Galvanizing 2. Tinning

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Change in volume of metals from absolute zero temperature to their melting points is (A) Almost same for all metals (B) Different for different metals (C) Less for low melting point metals (D) Less for high melting point metals

Description : Change in volume of metals from absolute zero temperature to their melting points is (A) Almost same for all metals (B) Different for different metals (C) Less for low melting point metals (D) Less for high melting point metals

Last Answer : (A) Almost same for all metals

Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Last Answer : (B) For fibre making