__________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

__________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C.
(A) Veneering
(B) Galvanising
(C) Electroplating
(D) Calorising
by

1 Answer

Answer :

(D) Calorising
by

Related questions

The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Description : The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Last Answer : (B) Galvanising

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

The coating of a thin layer of zinc on steel or iron objects is known as – (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Description : The coating of a thin layer of zinc on steel or iron objects is known as – (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Last Answer : (3) Galvanising Explanation: Galvanization is the process of applying a protective zinc coating to steel or iron, in order to prevent rusting. Although galvanization can be done with electrochemical and ... is hot-dip galvanization, in which steel parts are submerged in a bath of molten zinc.

The coating of a thin layer of zinc on steel or iron objects is known as (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Description : The coating of a thin layer of zinc on steel or iron objects is known as (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Last Answer : Galvanising

Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process? (A) Galvanising (B) Tinning (C) Sherardizing (D) None of these

Description : Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process? (A) Galvanising (B) Tinning (C) Sherardizing (D) None of these

Last Answer : (C) Sherardizing

Which of the following is false? (a) Mica is usually found in metamorphic and igneous rocks (b) Aluminium has the advantage over iron as it is resistant to corrosion (c) line is mostly used in galvanising iron and steel goods (d) Manganese is largely used in making fertilizers

Description : Which of the following is false? (a) Mica is usually found in metamorphic and igneous rocks (b) Aluminium has the advantage over iron as it is resistant to corrosion (c) line is mostly used in galvanising iron and steel goods (d) Manganese is largely used in making fertilizers

Last Answer : Ans: (d)

Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Description : Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Last Answer : (C) Low carbon steels

Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________ gms of zinc per m2 of steel strip. (A) 5-10 (B) 1000-1500 (C) 120-500 (D) 1500-3000

Description : Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________ gms of zinc per m2 of steel strip. (A) 5-10 (B) 1000-1500 (C) 120-500 (D) 1500-3000

Last Answer : Option C

Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability to be cast, rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Last Answer : (A) High strength to weight ratio

(3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be plated the negative electrode (cathode) or plate in a galvanic couple. Thus a spoon or other object may be connected by a wire to a plate of nickel. The process that occurs on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

Which of the following metals in not used for coating of the base metal to guard it against corrosion? (A) Lead (B) Cadmium (C) Magnesium (D) Aluminium

Description : Which of the following metals in not used for coating of the base metal to guard it against corrosion? (A) Lead (B) Cadmium (C) Magnesium (D) Aluminium

Last Answer : (C) Magnesium

Wrought iron does not have (A) Uniform strength in all directions (B) Ability to hold protective coating (C) High ductility & corrosion resistance (D) Easily weldable characteristics

Description : Wrought iron does not have (A) Uniform strength in all directions (B) Ability to hold protective coating (C) High ductility & corrosion resistance (D) Easily weldable characteristics

Last Answer : Option A

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

. The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C and the heat transfer co-efficient between the outer surface of wall and air is 20 W.m-2 .°C-1 . The rate of heat loss from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Last Answer : (A) 165.4

In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as: A. Electroplating B. Annealing C. Galvanization D. Vulcanization

Description : In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as: A. Electroplating B. Annealing C. Galvanization D. Vulcanization

Last Answer : ANSWER: C

In order to prevent the corrosion of iron pipes, they are often coated with a layer of zinc. This process is termed as (a) electroplating (b) annealing (c) galvanization (d) vulcanization

Description : In order to prevent the corrosion of iron pipes, they are often coated with a layer of zinc. This process is termed as (a) electroplating (b) annealing (c) galvanization (d) vulcanization

Last Answer : Ans:(c)

In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as------? A. Electroplating B. Annealing C. Galvanization (Answer) D. Vulcanization

Description : In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as------? A. Electroplating B. Annealing C. Galvanization (Answer) D. Vulcanization

Last Answer : C. Galvanization (Answer)

Yield of urea can be increased with excess ammonia and higher pressure & temperature, but because of __________ this is normally not done. (A) Increased biuret formation (B) High corrosion rate (C) Increased cost of equipment (D) All (A), (B) & (C)

Description : Yield of urea can be increased with excess ammonia and higher pressure & temperature, but because of __________ this is normally not done. (A) Increased biuret formation (B) High corrosion rate (C) Increased cost of equipment (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In areas where there is severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339* b) One coat of zinc chromate priming to IS : 104 e) Two cover coats of red oxide paint to IS :123 f) One coat of zinc chrome - red oxide priming to IS : 2074

Description : In areas where there is severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339* b) One coat of zinc chromate priming to IS : 104 e) Two cover coats of red oxide paint to IS :123 f) One coat of zinc chrome - red oxide priming to IS : 2074

Last Answer : a) Two coats of aluminium paint to IS : 2339*

In areas where there is no severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339 b) One coat of zinc chromate priming to IS : 104 c) Two cover coats of red oxide paint to IS :123* d) One coat of zinc chrome - red oxide priming to IS : 2074

Description : In areas where there is no severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339 b) One coat of zinc chromate priming to IS : 104 c) Two cover coats of red oxide paint to IS :123* d) One coat of zinc chrome - red oxide priming to IS : 2074

Last Answer : c) Two cover coats of red oxide paint to IS :123*

Which metal does not undergo corrosion due to the formation of oxide layer? (1) Copper (2) Iron (3) Aluminium (4) Zinc

Description : Which metal does not undergo corrosion due to the formation of oxide layer? (1) Copper (2) Iron (3) Aluminium (4) Zinc

Last Answer : Aluminium

. Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Description : . Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Last Answer : (C) Give elasticity & prevent cracking of the film

Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron

Description : Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron

Last Answer : D) Wrought iron

Sherardizing process is used for (A) Surface coating (B) Heat treatment of high speed steel (C) Cold working on metals (D) None of these

Description : Sherardizing process is used for (A) Surface coating (B) Heat treatment of high speed steel (C) Cold working on metals (D) None of these

Last Answer : (A) Surface coating

Electroplating can be carried out for 1. Preservation 2. Decoration 3. Protection from corrosion The correct statement(s) is/are: (a) 1 and 2 only (b) 1, 2 and 3 (c) 2 and 3 only (d) 1 and 3 only

Description : Electroplating can be carried out for 1. Preservation 2. Decoration 3. Protection from corrosion The correct statement(s) is/are: (a) 1 and 2 only (b) 1, 2 and 3 (c) 2 and 3 only (d) 1 and 3 only

Last Answer : Ans:(b)

Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance

Description : Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance

Last Answer : (C) Abrasion resistance & toughness

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

Which of the following materials does not form adherent oxide film on surface? (A) Copper (B) Nickel (C) Aluminium (D) Gold & silver

Description : Which of the following materials does not form adherent oxide film on surface? (A) Copper (B) Nickel (C) Aluminium (D) Gold & silver

Last Answer : (D) Gold & silver

Iron is prevented from rusting by coating with zinc. This process is called as – (1) Galvanisation (2) Corrosion (3) Sublimation (4) Reduction

Description : Iron is prevented from rusting by coating with zinc. This process is called as – (1) Galvanisation (2) Corrosion (3) Sublimation (4) Reduction

Last Answer : (1) Galvanisation Explanation: Galvanization is the process of applying a protective zinc coating to steel or iron, in order to prevent rusting. The term is derived from the name of Italian scientist Luigi ... is hot-dip galvanization, in which steel parts are sub-merged in a bath of molten zinc.

Iron is prevented from rusting by coating with zinc. This process is called as (1) Galvanisation (2) Corrosion (3) Sublimation (4) Reduction

Description : Iron is prevented from rusting by coating with zinc. This process is called as (1) Galvanisation (2) Corrosion (3) Sublimation (4) Reduction

Last Answer : Galvanisation

Which of the following is the most important rubber compounding ingredient which is used to improve wearing qualities of both natural rubber & SBR by imparting toughness? (A) Phosphorous (B) Carbon black (C) Pine oil (D) Rosin

Description : Which of the following is the most important rubber compounding ingredient which is used to improve wearing qualities of both natural rubber & SBR by imparting toughness? (A) Phosphorous (B) Carbon black (C) Pine oil (D) Rosin

Last Answer : (B) Carbon black

. Carboxymethyl cellulose (CMC) is added in detergents to (A) Prevent redeposition of soil on cleaned surface (B) Act as optical brightening agent (C) Inhibit corrosion in washing machines made of aluminium (D) None of these

Description : . Carboxymethyl cellulose (CMC) is added in detergents to (A) Prevent redeposition of soil on cleaned surface (B) Act as optical brightening agent (C) Inhibit corrosion in washing machines made of aluminium (D) None of these

Last Answer : (A) Prevent redeposition of soil on cleaned surface

Addition of plasticisers to polymers results in partial neutralisation of intermolecular forces of attraction between the macro-molecules thereby increasing its (A) Tensile strength (B) Chemical resistance (C) Flexibility (D) All (A), (B) & (C)

Description : Addition of plasticisers to polymers results in partial neutralisation of intermolecular forces of attraction between the macro-molecules thereby increasing its (A) Tensile strength (B) Chemical resistance (C) Flexibility (D) All (A), (B) & (C)

Last Answer : (C) Flexibility

Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Description : Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Last Answer : (B) Low carbon steel

In low temperature carbonisation of coal, the(A) Yield of coke oven gas is 290 Nm3/ton dry coal(B) Volatile matter in coke is zero(C) Temperature maintained is 700°C(D) Yield of tar is about 3% of dry coal

Description : In low temperature carbonisation of coal, the (A) Yield of coke oven gas is 290 Nm3 /ton dry coal (B) Volatile matter in coke is zero (C) Temperature maintained is 700°C (D) Yield of tar is about 3% of dry coal

Last Answer : (C) Temperature maintained is 700°C

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

__________ are used as corrosion inhibitor for iron & steel in aqueous solutions. (A) Phosphates (B) Chromates (C) Sulphates (D) Bi-carbonates

Description : __________ are used as corrosion inhibitor for iron & steel in aqueous solutions. (A) Phosphates (B) Chromates (C) Sulphates (D) Bi-carbonates

Last Answer : (B) Chromates

High speed steel tools retain their hardness upto a temperature of __________ °C.(A) 500 (B) 750 (C) 900 (D) 1100

Description : High speed steel tools retain their hardness upto a temperature of __________ °C. (A) 500 (B) 750 (C) 900 (D) 1100

Last Answer : (C) 900

High speed steel tools retain their hardness upto a temperature of __________ °C. (A) 500 (B) 750 (C) 900 (D) 1100

Description : High speed steel tools retain their hardness upto a temperature of __________ °C. (A) 500 (B) 750 (C) 900 (D) 1100

Last Answer : Option C

Veneering means (A) Carving out designs on timber planks (B) Chemically treating timber planks (C) Thick layer of superior wood glued to inferior wood (D) Thin layer of superior wood glued to inferior wood

Description : Veneering means (A) Carving out designs on timber planks (B) Chemically treating timber planks (C) Thick layer of superior wood glued to inferior wood (D) Thin layer of superior wood glued to inferior wood

Last Answer : Answer: Option C

Which of the following metal is used in electroplating to make object appear shinning? a) Iron b)copper c)chromium d)aluminium

Description : Which of the following metal is used in electroplating to make object appear shinning? a) Iron b)copper c)chromium d)aluminium

Last Answer : c)chromium

Pick the odd man out of the following. (A) Calorising (B) Pack carburising (C) Nitriding (D) Cyaniding

Description : Pick the odd man out of the following. (A) Calorising (B) Pack carburising (C) Nitriding (D) Cyaniding

Last Answer : (A) Calorising

The main purpose of galvanising iron sheets is to (A) Harden the surface (B) Increase its glossiness and lustre (C) Prevent the action of water (D) Prevent the action of oxygen

Description : The main purpose of galvanising iron sheets is to (A) Harden the surface (B) Increase its glossiness and lustre (C) Prevent the action of water (D) Prevent the action of oxygen

Last Answer : (C) Prevent the action of water

Write the different types of oxide films formed on the metal surface. Explain the oxide film which is more protective against corrosion.

Description : Write the different types of oxide films formed on the metal surface. Explain the oxide film which is more protective against corrosion.

Last Answer : Types of oxide films 1. Stable porous oxide film 2. Stable non porous oxide film 3. Unstable oxide film 4. Volatile oxide film i) Stable nonporous oxide film ii) Unstable oxide films are protective ... . Example: - Such type of oxide film is formed in the metals like Ag, Au, and Pt.

Kel-F is a material, which is (A) Chemically known as Polychlorotrifluoroethylene (PTFE) (B) Having excellent chemical & high temperature resistance (upto 200°C) (C) Having elastomeric properties (D) All (A), (B) and (C)

Description : Kel-F is a material, which is (A) Chemically known as Polychlorotrifluoroethylene (PTFE) (B) Having excellent chemical & high temperature resistance (upto 200°C) (C) Having elastomeric properties (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Description : The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Last Answer : ANS: D

Hardening is a process of heating a metal to a) 400°C b) 500°C c) 600°C d) 700°C

Description : Hardening is a process of heating a metal to a) 400°C b) 500°C c) 600°C d) 700°C

Last Answer : c) 600°C

Presence of nickel in steel improves its (A) Corrosion resistance (B) Cutting ability (C) Wear resistance (D) All (A), (B) and (C

Description : Presence of nickel in steel improves its (A) Corrosion resistance (B) Cutting ability (C) Wear resistance (D) All (A), (B) and (C

Last Answer : (A) Corrosion resistance

Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility

Description : Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility

Last Answer : (B) Cutting hardness