While the recrystallisation temperature for pure metals is 0.3 Tm, the same for alloys is equal to __________ × Tm (where, Tm Melting temperature). (A) 0.25 (B) 0.45 (C) 0.70 (D) 0.95

While the recrystallisation temperature for pure metals is 0.3 Tm, the same for alloys is equal to __________ × Tm (where, Tm Melting temperature).
(A) 0.25
(B) 0.45
(C) 0.70
(D) 0.95
by

1 Answer

Answer :

(C) 0.70
by

Related questions

Pure rectified spirit contains about __________ percent alcohol. (A) 45 (B) 70 (C) 95 (D) 99.5

Description : Pure rectified spirit contains about __________ percent alcohol. (A) 45 (B) 70 (C) 95 (D) 99.5

Last Answer : (C) 95

Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Description : Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Last Answer : (A) 80 and 97

Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface between B and C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Last Answer : (C) 70

The temperature at which new grains are formed in the metal is called the __________ temperature. (A) Eutectic (B) Recrystallisation (C) Upper critical (D) Lower critical

Description : The temperature at which new grains are formed in the metal is called the __________ temperature. (A) Eutectic (B) Recrystallisation (C) Upper critical (D) Lower critical

Last Answer : (B) Recrystallisation

Recrystallisation temperature of steel is __________ °C. (A) 50 (B) 300 (C) 500 (D) 800

Description : Recrystallisation temperature of steel is __________ °C. (A) 50 (B) 300 (C) 500 (D) 800

Last Answer : (D) 800

Other parameters remaining same, the recrystallisation temperature of an alloy is lowered, when (A) Strain rate is increased (B) Grain size is increased (C) Prior cold deformation is increased (D) Not affected by any of the above parameters

Description : Other parameters remaining same, the recrystallisation temperature of an alloy is lowered, when (A) Strain rate is increased (B) Grain size is increased (C) Prior cold deformation is increased (D) Not affected by any of the above parameters

Last Answer : (A) Strain rate is increased

The optimum cavosurface angle for occlusal amalgam surface is: A. 45-60° B. 70-85° C. 45-80° D. 95-110° E. 130-150°

Description : The optimum cavosurface angle for occlusal amalgam surface is: A. 45-60° B. 70-85° C. 45-80° D. 95-110° E. 130-150°

Last Answer : D. 95-110°

Which of the following methods is useful for separating pure forms of low melting metals?

Description : Which of the following methods is useful for separating pure forms of low melting metals?

Last Answer : Which of the following methods is useful for separating pure forms of low melting metals? A. ... . Distillation C. Poling D. Vapour phase refining

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95(D) 80

Description : Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95 (D) 80

Last Answer : (C) 95

Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Description : Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Last Answer : (A) Tin can be readily and very easily drawn into very fine wire

Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its fatigue strength (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Description : Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its ... (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Last Answer : (C) Cold working of a metal decreases its fatigue strength

Which of the following terminology is used for the temperature at which new grains are formed in a metal? (A) Eutectic temperature (B) Lower critical temperature (C) Recrystallisation temperature (D) Upper critical temperature

Description : Which of the following terminology is used for the temperature at which new grains are formed in a metal? (A) Eutectic temperature (B) Lower critical temperature (C) Recrystallisation temperature (D) Upper critical temperature

Last Answer : Recrystallisation temperature

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

After accounting for SDA, the net gain of energy from 25 gm of carbohydrates is about (A) 70 kcal (B) 95 kcal (C) 100 kcal (D) 105 kcal

Description : After accounting for SDA, the net gain of energy from 25 gm of carbohydrates is about (A) 70 kcal (B) 95 kcal (C) 100 kcal (D) 105 kcal

Last Answer : Answer : B

Cost of fencing a circular plot at the rate of Rs.15 per metre is Rs.3, 300. What will be the cost of flooring the plot at the rate of Rs.100 per square metre? a) Rs.3, 85,000 b) Rs.4, 70,000 c) Rs.2, 25,000 d) Rs.3, 50,000 e) Rs.2, 95,000

Description : Cost of fencing a circular plot at the rate of Rs.15 per metre is Rs.3, 300. What will be the cost of flooring the plot at the rate of Rs.100 per square metre? a) Rs.3, 85,000 b) Rs.4, 70,000 c) Rs.2, 25,000 d) Rs.3, 50,000 e) Rs.2, 95,000

Last Answer : Perimeter of plot = 3300/15 = 220 meter 2πr = 220 2 × 22/7 × r = 220 r = 35 m. Area of plot = πr^2 = 22/7 × 35 × 35 = 3850 mt^2 Cost of flooring = 3850 × 100=Rs. 385000 Answer: a)

Change in volume of metals from absolute zero temperature to their melting points is (A) Almost same for all metals (B) Different for different metals (C) Less for low melting point metals (D) Less for high melting point metals

Description : Change in volume of metals from absolute zero temperature to their melting points is (A) Almost same for all metals (B) Different for different metals (C) Less for low melting point metals (D) Less for high melting point metals

Last Answer : (A) Almost same for all metals

Give reason: Metals belonging to the same group form good alloys.

Description : Give reason: Metals belonging to the same group form good alloys.

Last Answer : As metals belonging to the same group in the periodic table have similarities in electronic configuration.

Babbitt metals used for making bearings are (A) Tin or lead based alloys (B) Short of antifrictional properties (C) Having homogenous microstructure (D) Yellow metals

Description : Babbitt metals used for making bearings are (A) Tin or lead based alloys (B) Short of antifrictional properties (C) Having homogenous microstructure (D) Yellow metals

Last Answer : (A) Tin or lead based alloys

Electro deposition of metals i.e. electroplating is never done on (A) Metals (B) Alloys (C) Refractories (D) Non-metals

Description : Electro deposition of metals i.e. electroplating is never done on (A) Metals (B) Alloys (C) Refractories (D) Non-metals

Last Answer : (C) Refractories

Which of the following is used as base material in Electron Beam Melting (EBM) process? a.Titanium alloys b.Photopolymer c.Various materials d.Paper

Description : Which of the following is used as base material in Electron Beam Melting (EBM) process? a.Titanium alloys b.Photopolymer c.Various materials d.Paper

Last Answer : a.Titanium alloys

Opening WDV off the block of assets was Rs 15 lakh. During the year, asset was acquired under this block on 15 June 2017 amounting to rupees 10 lakh. One of the assets falling within the block was sold for rupees 5.5 lakh on 14 January 2018. Rate of depreciation of block is 10%. Calculate the amount of depreciation available during the previous year for the block. e. rupees 1.95 lakh f. rupees 2.5 lakh g. rupees 2.25 lakh h. Rs 1.45 lakh

Description : Opening WDV off the block of assets was Rs 15 lakh. During the year, asset was acquired under this block on 15 June 2017 amounting to rupees 10 lakh. One of the assets falling within the block was sold for rupees 5.5 ... . rupees 1.95 lakh f. rupees 2.5 lakh g. rupees 2.25 lakh h. Rs 1.45 lakh

Last Answer : e. rupees 1.95 lakh

Opening WDV off the block of assets was Rs 15 lakh. During the year, asset was acquired under this block on 15 January 2018 amounting to rupees 10 lakh. One of the assets falling within the block was sold for rupees 5.5 lakh on 14 January 2018. Rate of depreciation of block is 10%. Calculate the amount of depreciation available during the previous year. a. rupees 1.95 lakh b. rupees 2.5 lakh c. rupees 2.25 lakh d. Rs 1.45 lakh

Description : Opening WDV off the block of assets was Rs 15 lakh. During the year, asset was acquired under this block on 15 January 2018 amounting to rupees 10 lakh. One of the assets falling within the block was sold for rupees 5.5 ... rupees 1.95 lakh b. rupees 2.5 lakh c. rupees 2.25 lakh d. Rs 1.45 lakh

Last Answer : d. Rs 1.45 lakh

The maximum discharge through a circular channel takes place, when the depth of the fluid flow is __________ times the pipe diameter. (A) 0.25 (B) 0.5 (C) 0.66 (D) 0.95

Description : The maximum discharge through a circular channel takes place, when the depth of the fluid flow is __________ times the pipe diameter. (A) 0.25 (B) 0.5 (C) 0.66 (D) 0.95

Last Answer : (D) 0.95

Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Description : Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Last Answer : (A) Unbound

Consider two alloys A and B. 50 kg of alloy A is mixed with 70 kg of alloy B. A contains brass and copper in the ratio 3 : 2, and B contains them in the ratio 4 : 3 respectively. What is the ratio of copper to brass in the mixture? A) 8 : 5 B) 7 : 5 C) 5 : 11 D) 4 : 9 E) 5 : 7

Description : Consider two alloys A and B. 50 kg of alloy A is mixed with 70 kg of alloy B. A contains brass and copper in the ratio 3 : 2, and B contains them in the ratio 4 : 3 respectively. What is the ratio of copper to brass in the mixture? A) 8 : 5 B) 7 : 5 C) 5 : 11 D) 4 : 9 E) 5 : 7

Last Answer : Answer: E Brass in A = 3/5 * 50 = 30 kg, Brass in B = 4/7 * 70 = 40 kg Total brass = 30+40 = 70 kg So copper in mixture is (50+70) – 70 = 50 kg So copper to brass = 50 : 70=5:7

The amount of benzene present in pure Benzol is about __________ percent. (A) 30 (B) 50 (C) 70 (D) 90

Description : The amount of benzene present in pure Benzol is about __________ percent. (A) 30 (B) 50 (C) 70 (D) 90

Last Answer : (C) 70

Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points

The high expansion metal normally used in the bimetallic thermometer is __________ temperature measurement. (A) Brass for low (B) Nickel alloys for high (C) Both 'a' & 'b' (D) Aluminium for all

Description : The high expansion metal normally used in the bimetallic thermometer is __________ temperature measurement. (A) Brass for low (B) Nickel alloys for high (C) Both 'a' & 'b' (D) Aluminium for all

Last Answer : (C) Both 'a' & 'b'

Which of the following is used as base material in Stereolithography (SLA) process? a.Thermoplastics , Metals powders b.Thermoplastics , Eutectic metals. c.Titanium alloys d.Photopolymer

Description : Which of the following is used as base material in Stereolithography (SLA) process? a.Thermoplastics , Metals powders b.Thermoplastics , Eutectic metals. c.Titanium alloys d.Photopolymer

Last Answer : d.Photopolymer

Elements that show the properties of both metals and non-metals are called (a) Allotropes (b) Metalloids (c) Alloys (d) Colloids

Description : Elements that show the properties of both metals and non-metals are called (a) Allotropes (b) Metalloids (c) Alloys (d) Colloids

Last Answer : Ans:(b)

Alloys in which mercury is one of the metals are called (a) Amalgams (b) Emulsions (c) Mixtures (d) Solders

Description : Alloys in which mercury is one of the metals are called (a) Amalgams (b) Emulsions (c) Mixtures (d) Solders

Last Answer : Ans:(a)

Metals, in general are of low strength and do not possess required physio-chemical and technological properties for a definite purpose. Alloys are therefore more than metals alone. Discuss the arrangement of atoms and Structures of alloys.

Description : Metals, in general are of low strength and do not possess required physio-chemical and technological properties for a definite purpose. Alloys are therefore more than metals alone. Discuss the arrangement of atoms and Structures of alloys.

Last Answer : Alloys are produced by melting or sintering two ore more metals, or metals and a non-metal, together. Alloys possess typical properties inherent in the metallic state. The chemical elements ... an alloy are its individual portions, each having a single structure with its characteristic features.

How are the properties of alloys different from those of metals?

Description : How are the properties of alloys different from those of metals?

Last Answer : Copper is reddish and zinc is grayish in colour where as brass which is an alloy of copper and zinc is golden yellow in colour. Iron is a magnetic substance but stainless steel, an alloy of iron is non magnetic.

Which of the following phenomenon/ phenomena is/are diffusion controlled? (A) Dislocation climb (B) Cross-slip (C) Twinning (D) Recrystallisation

Description : Which of the following phenomenon/ phenomena is/are diffusion controlled? (A) Dislocation climb (B) Cross-slip (C) Twinning (D) Recrystallisation

Last Answer : (D) Recrystallisation

Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Last Answer : (B) 60-70

A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Description : A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Last Answer : 265.4°C, 430.7kJ/kg, 71.4kJ/kg, 1.0327kJ/(kg)(K),502.1 kJ/kg

Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Description : Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Last Answer : (B) 25-30

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

Melting point & boiling points of liquid oxygen are respectively - 218.8°C & - 183°C, while the same for liquid nitrogen is - 210°C & - 195.8°C respectively. The difference in melting points of liquid oxygen & liquid nitrogen is not equal to 8.8 (A) °C (B) °F (C) °K (D) °R

Description : Melting point & boiling points of liquid oxygen are respectively - 218.8°C & - 183°C, while the same for liquid nitrogen is - 210°C & - 195.8°C respectively. The difference in melting points of liquid oxygen & liquid nitrogen is not equal to 8.8 (A) °C (B) °F (C) °K (D) °R

Last Answer : (B) °F

At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Description : At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Last Answer : a. 35-55 degree

A number is increased by 70 % and then decreased by 70 %. Find the net increase or decrease per cent. a) 25 b) 56 c) 45 c) 49 e) 98

Description : A number is increased by 70 % and then decreased by 70 %. Find the net increase or decrease per cent. a) 25 b) 56 c) 45 c) 49 e) 98 

Last Answer : Answer: D Let the number be 100. Increase in the number = 70 % = 40 % of 100  = (40/100 100)  = 70 Therefore, increased number = 100 + 70 = 170 This number is decreased by 70 % Therefore, decrease ... = 100 - 51 = 49 Hence, net percentage decrease = (49/100 100)  = (4900/100)  = 49 %

The metals with very low melting points which melts by the temperature of palm are A) Sodium and potassium B) Lead and magnesium C) Aluminium and zinc D) Gallium and caesium

Description : The metals with very low melting points which melts by the temperature of palm are A) Sodium and potassium B) Lead and magnesium C) Aluminium and zinc D) Gallium and caesium

Last Answer : D) Gallium and caesium

High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent. (A) 5 to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Last Answer : (C) 45 to 50

Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Description : Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Last Answer : (A) Less than

Ignition temperature of a fuel in air is __________ that in pure oxygen. (A) More than(B) Less than(C) Equal to(D) Either more or less; depends on the type of fuel

Description : Ignition temperature of a fuel in air is __________ that in pure oxygen. (A) More than (B) Less than (C) Equal to (D) Either more or less; depends on the type of fuel

Last Answer : (A) More than

`{:("Respiration","Atmosphere","Alveoli","Deoxygenated blood","Oxygenated blood","Tissue"),(O_(2),159,104,B,95,D),(CO_(2),0.3,A,45,C,45):}` Correct op

Description : `{:("Respiration","Atmosphere","Alveoli","Deoxygenated blood","Oxygenated blood","Tissue"),(O_(2),159,104,B,95,D),(CO_(2),0.3,A,45,C,45):}` Correct op

Last Answer : `{:("Respiration","Atmosphere","Alveoli","Deoxygenated blood","Oxygenated blood","Tissue"),(O_(2),159,104,B,95,D) ... 45, 40, 95, 40 D. 40, 45, 40, 40

When a voltage of 115 VDC is applied to the illustrated circuit with a resistance of 10,230 ohms the current will be _______ EL-0018 A. 88.95 milliamps B. 103.45 milliamps C. 11.24 milliamps D. 0.91 amps

Description : When a voltage of 115 VDC is applied to the illustrated circuit with a resistance of 10,230 ohms the current will be _______ EL-0018 A. 88.95 milliamps B. 103.45 milliamps C. 11.24 milliamps D. 0.91 amps

Last Answer : Answer: C

The coefficient of venturi-flume, generally, lies between (A) 0.3 to 0.45 (B) 0.50 to 0.75 (C) 0.75 to 0.95 (D) 0.95 to 1.0

Description : The coefficient of venturi-flume, generally, lies between (A) 0.3 to 0.45 (B) 0.50 to 0.75 (C) 0.75 to 0.95 (D) 0.95 to 1.0

Last Answer : Answer: Option D

Cetane number of high speed diesel must be ≥ (A) 30 (B) 45 (C) 75 (D) 95

Description : Cetane number of high speed diesel must be ≥ (A) 30 (B) 45 (C) 75 (D) 95

Last Answer : (B) 45