Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Shatter index of metallurgical coke on 2 inches and 0.5 inch screen
should be respectively around __________ percent.
(A) 80 and 97
(B) 95 and 100
(C) 40 and 70
(D) 25 and 97
by

1 Answer

Answer :

(A) 80 and 97
by

Related questions

Quantity of coke produced from metallurgical coal may be around __________ percent. (A) 30 (B) 50 (C) 75 (D) 95

Description : Quantity of coke produced from metallurgical coal may be around __________ percent. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (C) 75

Caking index of the coal blend used for the manufacture of metallurgical coke should be around (A) 5 (B) 21 (C) 40 (D) 48

Description : Caking index of the coal blend used for the manufacture of metallurgical coke should be around (A) 5 (B) 21 (C) 40 (D) 48

Last Answer : (B) 21

Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95(D) 80

Description : Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95 (D) 80

Last Answer : (C) 95

Volatile matter content of metallurgical coke may be around __________ percent. (A) 1-2 (B) 10-15 (C) 22-26 (D) 30-33

Description : Volatile matter content of metallurgical coke may be around __________ percent. (A) 1-2 (B) 10-15 (C) 22-26 (D) 30-33

Last Answer : (A) 1-2

Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80

Description : Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80

Last Answer : (D) 80

Shatter index of the coke is a measure of its (A) Strength (B) Bulk density (C) Reactivity (D) None of these

Description : Shatter index of the coke is a measure of its (A) Strength (B) Bulk density (C) Reactivity (D) None of these

Last Answer : (A) Strength

A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Description : A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Last Answer : (A) 10-15

Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface between B and C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Last Answer : (C) 70

Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Description : Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Last Answer : (A) 1-5

Desirable "Micum Index" values of metallurgical coke are (A) M40 > 78% and M10 < 10% (B) M40 > 4% and M10 < 80% (C) M40 > 10% and M10 < 78% (D) M40 > 98% and M10 < 2%

Description : Desirable "Micum Index" values of metallurgical coke are (A) M40 > 78% and M10 < 10% (B) M40 > 4% and M10 < 80% (C) M40 > 10% and M10 < 78% (D) M40 > 98% and M10 < 2%

Last Answer : (A) M40 > 78% and M10 < 10%

Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Description : Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Last Answer : (A) 25-80

Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55(C) 80 (D) 94

Description : Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55 (C) 80 (D) 94

Last Answer : (D) 94

Pure rectified spirit contains about __________ percent alcohol. (A) 45 (B) 70 (C) 95 (D) 99.5

Description : Pure rectified spirit contains about __________ percent alcohol. (A) 45 (B) 70 (C) 95 (D) 99.5

Last Answer : (C) 95

Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 percent (C) Roughly 1 to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Description : Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 ... to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Last Answer : Answer: Option D

While the recrystallisation temperature for pure metals is 0.3 Tm, the same for alloys is equal to __________ × Tm (where, Tm Melting temperature). (A) 0.25 (B) 0.45 (C) 0.70 (D) 0.95

Description : While the recrystallisation temperature for pure metals is 0.3 Tm, the same for alloys is equal to __________ × Tm (where, Tm Melting temperature). (A) 0.25 (B) 0.45 (C) 0.70 (D) 0.95

Last Answer : (C) 0.70

Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Description : Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Last Answer : (a) 20—25 km

Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Description : Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Last Answer : (B) 25-30

Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Description : Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Last Answer : (B) 40

Alcohol content in freshly prepared natural and fortified **** may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Description : Alcohol content in freshly prepared natural and fortified wine may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Last Answer : (A) 7-14 and 14-30

After accounting for SDA, the net gain of energy from 25 gm of carbohydrates is about (A) 70 kcal (B) 95 kcal (C) 100 kcal (D) 105 kcal

Description : After accounting for SDA, the net gain of energy from 25 gm of carbohydrates is about (A) 70 kcal (B) 95 kcal (C) 100 kcal (D) 105 kcal

Last Answer : Answer : B

Cost of fencing a circular plot at the rate of Rs.15 per metre is Rs.3, 300. What will be the cost of flooring the plot at the rate of Rs.100 per square metre? a) Rs.3, 85,000 b) Rs.4, 70,000 c) Rs.2, 25,000 d) Rs.3, 50,000 e) Rs.2, 95,000

Description : Cost of fencing a circular plot at the rate of Rs.15 per metre is Rs.3, 300. What will be the cost of flooring the plot at the rate of Rs.100 per square metre? a) Rs.3, 85,000 b) Rs.4, 70,000 c) Rs.2, 25,000 d) Rs.3, 50,000 e) Rs.2, 95,000

Last Answer : Perimeter of plot = 3300/15 = 220 meter 2πr = 220 2 × 22/7 × r = 220 r = 35 m. Area of plot = πr^2 = 22/7 × 35 × 35 = 3850 mt^2 Cost of flooring = 3850 × 100=Rs. 385000 Answer: a)

Grinding characteristic of a material is given by its (A) HGI (B) Angle of repose (C) Shatter index (D) Abrasion index

Description : Grinding characteristic of a material is given by its (A) HGI (B) Angle of repose (C) Shatter index (D) Abrasion index

Last Answer : (A) HGI

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Description : Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Last Answer : (D) None of these

Low temperature carbonisation of coal produces (A) Metallurgical coke (B) Soft coke (C) Very low calorific value coke oven gas (D) No by-products

Description : Low temperature carbonisation of coal produces (A) Metallurgical coke (B) Soft coke (C) Very low calorific value coke oven gas (D) No by-products

Last Answer : (B) Soft coke

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

Which of the following coke has the least percentage of ash? (A) Petroleum coke (B) Beehive coke (C) Foundry coke (D) Metallurgical coke

Description : Which of the following coke has the least percentage of ash? (A) Petroleum coke (B) Beehive coke (C) Foundry coke (D) Metallurgical coke

Last Answer : (A) Petroleum coke

A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Description : A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Last Answer : (A) Should have high porosity

The concentration (weight %) of nitric acid produced by the oxidation of ammonia and absorption of nitrogen oxides with water is about __________ percent. (A) 60 (B) 30 (C) 95 (D) 100

Description : The concentration (weight %) of nitric acid produced by the oxidation of ammonia and absorption of nitrogen oxides with water is about __________ percent. (A) 60 (B) 30 (C) 95 (D) 100

Last Answer : (A) 60

Of the total tar present in raw coke oven gas, the tar recovered in primary cooler is about __________ percent. (A) 5 (B) 25 (C) 55 (D) 75

Description : Of the total tar present in raw coke oven gas, the tar recovered in primary cooler is about __________ percent. (A) 5 (B) 25 (C) 55 (D) 75

Last Answer : (B) 25

Coking time in narrow by-product coke ovens is around __________ hours. (A) 18 (B) 48 (C) 8 (D) 80

Description : Coking time in narrow by-product coke ovens is around __________ hours. (A) 18 (B) 48 (C) 8 (D) 80

Last Answer : (A) 18

Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Description : Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Last Answer : (B) 20 to 30

Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (D) 24

According to the United Nations’ publication, Ending Hunger: An Idea Whose Time Has Come, in the last 88 years, ____ countries have done away with hunger; 41 of these countries have done it since ____. a. 80, 1970 c. 95, 1980 b. 70, 1955 d. 75, 1960

Description : According to the United Nations’ publication, Ending Hunger: An Idea Whose Time Has Come, in the last 88 years, ____ countries have done away with hunger; 41 of these countries have done it since ____. a. 80, 1970 c. 95, 1980 b. 70, 1955 d. 75, 1960

Last Answer : d. 75, 1960

The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85

Description : The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85

Last Answer : (B) 40

Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Description : Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Last Answer : (B) 10

Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Description : Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Last Answer : (C) 70

How many % of adults primarily use their smartphones to access content/information? A. 0.85 B. 0.9 C. 0.95 D. 0.97

Description : How many % of adults primarily use their smartphones to access content/information? A. 0.85 B. 0.9 C. 0.95 D. 0.97

Last Answer : C. 0.95

The draft of ‘Victory plough’ is— (A) 80-100 kg (B) 40-50 kg(C) 70-80 kg (D) 10-20 kg

Description : The draft of ‘Victory plough’ is— (A) 80-100 kg (B) 40-50 kg(C) 70-80 kg (D) 10-20 kg

Last Answer : (A) 80-100 kg

Which of the following represents hardest grade of bitumen? (A) 30/40 (B) 60/70 (C) 80/100 (D) 100/120

Description : Which of the following represents hardest grade of bitumen? (A) 30/40 (B) 60/70 (C) 80/100 (D) 100/120

Last Answer : Answer: Option A

U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85(B) 50 (C) 3 (D) 97

Description : U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85 (B) 50 (C) 3 (D) 97

Last Answer : (C) 3

The energy dissipated when a car hits a tree at 70 miles per hour is ABOUT how much greater than that dissipated at 50 miles per hour? w) 20 percent x) 40 percent y) 70 percent z) 100 percent

Description : The energy dissipated when a car hits a tree at 70 miles per hour is ABOUT how much greater than that dissipated at 50 miles per hour? w) 20 percent x) 40 percent y) 70 percent z) 100 percent

Last Answer : ANSWER: Z -- 100 PERCENT

The conversion of caprolactam in the above case is about __________ percent. (A) 25 (B) 50 (C) 70 (D) 90

Description : The conversion of caprolactam in the above case is about __________ percent. (A) 25 (B) 50 (C) 70 (D) 90

Last Answer : (D) 90

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

If 1 inch 2.54 centimeters how many inches are there in 2540 centimeters and nbsp A. 1000 inches and nbsp B. 100 inches and nbsp C. 10 inches and nbsp D. 0.10 inches?

Description : If 1 inch 2.54 centimeters how many inches are there in 2540 centimeters and nbsp A. 1000 inches and nbsp B. 100 inches and nbsp C. 10 inches and nbsp D. 0.10 inches?

Last Answer : What is the answer ?

Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Last Answer : (D) 80

Ringelmann chart No. 2 corresponds to __________ percent black smoke. (A) 10 (B) 20 (C) 40 (D) 80

Description : Ringelmann chart No. 2 corresponds to __________ percent black smoke. (A) 10 (B) 20 (C) 40 (D) 80

Last Answer : (C) 40

What percent of candidates from institute D have come out to be successful out of the total candidates enrolled from this institute? a) 115 b) 95 c) 80 d) 85 e) None of these

Description : What percent of candidates from institute D have come out to be successful out of the total candidates enrolled from this institute? a) 115 b) 95 c) 80 d) 85 e) None of these

Last Answer : b) 95