Description : Fouling factor (A) Is a dimensionless quantity (B) Does not provide a safety factor for design (C) Accounts for additional resistances to heat flow (D) None of these
Last Answer : (C) Accounts for additional resistances to heat flow
Description : Which of the following is a dimensionless parameter? (A) Angular velocity (B) Specific weight (C) Kinematic viscosity (D) None of these
Last Answer : (D) None of these
Description : Corresponding to Prandtl number in heat transfer, the dimensionless group in mass transfer is the __________ number. (A) Schmidt (B) Sherwood (C) Peclet (D) Stanton
Last Answer : (A) Schmidt
Description : Corresponding to Nusselt number in heat transfer, the dimensionless group in mass transfer is the __________ number. (A) Sherwood (B) Schmidt (C) Peclet (D) Stanton
Last Answer : (A) Sherwood
Description : Which of the following is dimensionless? a.Specific speed b.Specific volume c.Specific gravity d.Specific weight e.None of the above
Last Answer : c. Specific gravity
Description : Which of the following is dimensionless? (A) Specific weight (B) Specific volume (C) Specific speed (D) Specific gravity
Last Answer : Answer: Option D
Description : Dimensions of strain are A. [L] B. [M] [L]-1 [T]-2 C. [L]-1 D. It's a dimensionless quantity
Last Answer : It's a dimensionless quantity
Description : Which of the following is correct regarding isolation factor? a) Dimensionless quantity b) Has Newton as its unit c) Has joule as its Unit d) Has Hz as its unit
Last Answer : a) Dimensionless quantity
Description : Pick up the correct statement from the following: (A) Coefficient of compressibility is the decrease in void ratio per unit increase of pressure (B) The percent settlement at any time is called degree of consolidation (C) Time factor is a dimensionless quantity (D) All the above
Description : Which of the following is a dimensionless quantity? (a) Shear stress (b) Poison’s ratio (c) Strain (d) Both (b) and (c)
Last Answer : (d) Both (b) and (c)
Description : Which of the following is dimensionless? (A) Angular velocity (B) Fanning friction factor (C) Specific volume (D) None of these
Last Answer : (B) Fanning friction factor
Description : The characteristic dimensionless groups for heat transfer to a fluid flowing through a pipe in laminar flow are (A) Re.Gz (B) Nu, Pr (C) Nu, Pr, Re (D) Nu, Gz
Last Answer : (D) Nu, Gz
Description : The dimensionless group in mass transfer that is equivalent to Prandtl number in heat transfer is (A) Nusselt number (B) Sherwood number (C) Schmidt number (D) Stanton numbe
Last Answer : (C) Schmidt number
Description : Buckingham-π theorem states that in any physical problem includingn' quantities having 'm' dimensions, the quantities can be arranged into __________ independent dimensionless parameters. (A) m (B) n (C) n-m (D) n/m
Last Answer : (C) n-m
Description : If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is (A) 0.31 (B) 0.107 (C) 0.017 (D) 0.215
Last Answer : (D) 0.215
Description : __________ remains constant during the adiabatic cooling of moist air. (A) Wet bulb temperature (B) Dry bulb temperature (C) Relative humidity (D) Specific humidity
Last Answer : Option A
Description : The temperature at which water boils depends mainly on ------? A. Air temperature B. Relative humidity C. Air pressure (Answer) D. Air density E. The specific heat of air
Last Answer : C. Air pressure (Answer)
Description : The term "relative humidity" applies to a) the percentage of moisture in the air as compared to the amount of moisture the air can hold at a specific temperature b) the weight of the moisture in the air c) ... of the air d) the amount of moisture in the air e) the amount of humidity in the air
Last Answer : ANSWER : A
Description : he soil which is found in the areas having heavy rainfall and high humidity, contains large quantity of organic matter and heavy and black in colour – a. Black soil b. Peat soil c. Forest soil d. Laterite soil
Last Answer : b. Peat soil
Description : The work index in Bond's law for crushing of solids has the following dimensions (A) No units (dimensionless) (B) kWh/ton (C) kW/ton (D) kWh.m1/2 /ton
Last Answer : (B) kWh/ton
Description : The friction factor is (A) Always inversely proportional to the Reynolds number (B) Not dimensionless (C) Not dependent on the roughness of the pipe (D) None of these
Description : The unit of frequency factor in Arrhenius equation is (A) Same as that of rate constant (B) Same as that of activation energy (C) Dimensionless (D) None of these
Last Answer : (A) Same as that of rate constant
Description : The extent of a reaction is (A) Different for reactants and products (B) Dimensionless (C) Depends on the stoichiometric co-efficient (D) All of the above
Last Answer : (D) All of the above
Description : Which of the following is not a unit of the equilibrium constant Kp? (where, Δx = number of moles of products number of moles of reactants) (A) (atm)Δx, when Δx is negative (B) (atm)Δx, when Δx is positive (C) Dimensionless, when Δx = 0 (D) (atm)Δx2, when Δx > 0
Last Answer : (D) (atm)Δx2, when Δx > 0
Description : Pick out the wrong statement. (A) Activity co-efficient is dimensionless. (B) In case of an ideal gas, the fugacity is equal to its pressure. (C) In a mixture of ideal gases, the fugacity of ... equal to the partial pressure of the component. (D) The fugacity co-efficient is zero for an ideal gas
Last Answer : (D) The fugacity co-efficient is zero for an ideal gas
Description : Consider the equilibrium A(g) + B(g) = AB(g). When the partial pressure of A is 10-2 atm, the partial pressure of B is 10-3 atm and the partial pressure of AB is 1 atm, the equilibrium constant 'K' is (A) 10 atm-1 (B) 105 atm-1 (C) 10 (dimensionless) (D) 105 (dimensionless)
Last Answer : Option B
Description : Calorie is a measure of (a) specific heat (b) quantity of heat (c) thermal capacity (d)entropy (e) work.
Last Answer : Answer : b
Description : The quantity of heat required to raise the temperature of a given substance by 1 oC is known as: a) sensible heat b) specific heat c) heat capacity d) latent heat
Last Answer : specific heat specific heat is the quantity of heat required to raise the temperature of 1 gram substance by 1 oC is
Description : Which of the following remains constant during sensible cooling process? (A) Specific humidity (B) Partial pressure of vapour (C) Both (A) and (B)
Last Answer : (C) Both (A) and (B)
Description : Air initially at 101. 3 kPa and 40°C and with a relative humidity of 50%, is cooled at constant pressure to 30°C. The cooled air has a (A) Higher dew point (B) Higher absolute (specific) humidity (C) Higher relative humidity (D) Higher wet bulb temperature
Last Answer : (C) Higher relative humidity
Description : When an unsaturated air-water mixture is heated at constant pressure, then (A) The partial pressure of water vapour increases (B) The specific humidity decreases (C) The relative humidity increases (D) The relative humidity decreases
Last Answer : D) The relative humidity decreases
Description : . In chemical dehumidification of air (A) Both specific humidity & dry bulb temperature increases (B) Both specific humidity & dry bulb temperature decreases (C) Specific humidity decreases & dry bulb temperature increases (D) Specific humidity increases & dry bulb temperature decreases
Last Answer : (C) Specific humidity decreases & dry bulb temperature increases
Description : State, whether all constants are dimensionless or unitless.
Last Answer : State, whether all constants are dimensionless or unitless.
Description : Why the Equilibrium constant is taken as dimensionless?
Last Answer : Ans. Activities are used in place of molar Conc. These represent the concentration or pressure with respect to standard state.
Description : Sommerfeld number is (A) Similar to bearing characteristic number (B) Similar to Reynold’s number (C) Dimensionless parameter that contains all the design parameters (D) Used to find out dynamic load carrying capacity of the hydrodynamic bearing
Last Answer : (C) Dimensionless parameter that contains all the design parameters
Description : Euler's dimensionless number relates the following (A) Inertial force and gravity (B) Viscous force and inertial force (C) Viscous force and buoyancy force (D) Pressure force and inertial force
Description : The compressibility factor, x, is used for predicting the behavior of nonideal gases. How is the compressibility ty factor defined relative to an ideal gas? (subscript c refers to critical value) A. ... compressibility factor, x, is an dimensionless constant given by pV=zRT. Therefore z = pV / RT
Last Answer : z = pV/ RT
Description : Consider the following statements. In case of flood routing in a river channel by Muskingum method, the coefficient x represents : 1. A dimensionless constant indicating the relative importance of inflow and outflow in determining storage ... , 3 and 4 only (c) 1, 2 and 3 only (d) 2, 3 and 4 only
Last Answer : (b) 1, 3 and 4 only
Description : The unit of relative permeability is (a) henry/metre (b) henry (c) henry/sq. m (d) it is dimensionless
Last Answer : (d) it is dimensionless
Description : SI unit of gain of amplifier is (a) Volt (b) ampere (c) coulomb (d) dimensionless
Last Answer : (d) dimensionless
Description : The dimension of strain is a) [L] b) [ML2T –2 ] c) [M L–1 T –2 ] d) Dimensionless
Last Answer : d) Dimensionless
Description : Euler’s dimensionless number relates the following : (A) Inertial force and gravity (B) Viscous force and Inertial force (C) Pressure force and Inertial force (D) Pressure force and viscous force
Last Answer : Euler’s dimensionless number relates the following : Pressure force and Inertial force
Description : At a fixed total pressure, humidity depends only on the (A) Partial pressure of vapour in the mixture (B) Heat capacity of the vapour (C) Density of the vapour (D) None of these
Last Answer : (A) Partial pressure of vapour in the mixture
Description : In psychrometric chart, specific humidity lines are: A. vertical B. horizontal C. inclined D. curved lines
Last Answer : ANSWER : B
Description : The ratio of partial pressure of water vapour in a mixture to the saturation pressure of water at the same temperature of the mixture is called as A. humidity B. partial humidity C. specific humidity D. relative humidity
Last Answer : ANSWER : D
Description : What is the specific humidity? A. the ratio of the mass of water vapour to the mass of the total mixture of air and water vapour B. the ratio of the mass of dry air to the mass of the total mixture ... ratio of the mass of water vapour to the mass of dry air in a mixture of air and water vapour
Description : What is the degree of saturation? A. the ratio of the actual relative humidity to the saturated specific humidity at the same temperature B. the ratio of the actual specific humidity to the ... specific humidity to the actual specific humidity at the same temperature D. none of the above
Description : The specific humidity scale on a psychrometric chart is along the: a. Bottom horizontal axis b. Right side vertical axis c. Top horizontal axis at the top of the chart d. Left saturation line e. Left-side vertical axis and left side
Last Answer : Answer: B
Description : Absolute or specific humidity is a) the actual mass of moisture present in a specific amount of air b) the maximum mass of moisture that a specific amount of air can hold c) the ratio of ... a specific amount of air at that absolute temperature e) a specific amount of air saturated with moisture
Description : The moisture content lines in psychrometric chart are also called as A. relative humidity lines B. specific humidity lines C. both a. and b. D. none of the above