Pick out the wrong statement. (A) The net change in entropy in any reversible cycle is always zero (B) The entropy of the system as a whole in an irreversible process increases (C) The entropy of the universe tends to a maximum (D) The entropy of a substance does not remain constant during a reversible adiabatic change

Pick out the wrong statement.
(A) The net change in entropy in any reversible cycle is always zero (B) The entropy of the system as a whole in an irreversible process increases (C) The entropy of the universe tends to a maximum
(D) The entropy of a substance does not remain constant during a reversible adiabatic change
by

1 Answer

Answer :

(D) The entropy of a substance does not remain constant during a reversible adiabatic change
by

Related questions

Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Description : Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Last Answer : (B) An isometric process is a constant pressure process

Entropy of a substance remains constant during a/an __________ change. (A) Reversible isothermal (B) Irreversible isothermal (C) Reversible adiabatic (D) None of these

Description : Entropy of a substance remains constant during a/an __________ change. (A) Reversible isothermal (B) Irreversible isothermal (C) Reversible adiabatic (D) None of these

Last Answer : (C) Reversible adiabatic

During adiabatic, internally reversible process, what is true about the change in entropy?  A. It is temperature-dependent  B. It is always greater than zero  C. It is always zero  D. It is always less than zero

Description : During adiabatic, internally reversible process, what is true about the change in entropy?  A. It is temperature-dependent  B. It is always greater than zero  C. It is always zero  D. It is always less than zero

Last Answer : It is always zero

Entropy change in case of reversible adiabatic process is (A) Minimum (B) Zero (C) Maximum (D) Indeterminate

Description : Entropy change in case of reversible adiabatic process is (A) Minimum (B) Zero (C) Maximum (D) Indeterminate

Last Answer : (B) Zero

For reversible adiabatic process, change in entropy is  (a) maximum  (b) minimum  (c) zero  (d) unpredictable  (e) negative

Description : For reversible adiabatic process, change in entropy is  (a) maximum  (b) minimum  (c) zero  (d) unpredictable  (e) negative

Last Answer : Answer : c

A system undergoes a change from a given initial state to a given final state either by an irreversible process or by a reversible process, then (where, Δ S1 and Δ SR are the entropy changes of the system for the irreversible and reversible processes respectively) (A) Δ S1is always < Δ SR (B) Δ S1is sometimes > Δ SR (C) Δ S1is always > Δ SR (D) Δ S1is always = Δ SR

Description : A system undergoes a change from a given initial state to a given final state either by an irreversible process or by a reversible process, then (where, Δ S1 and Δ SR are the entropy changes of the system for the ... S1is sometimes > Δ SR (C) Δ S1is always > Δ SR (D) Δ S1is always = Δ SR

Last Answer : (C) Δ S1is always > Δ SR

Pick out the correct statement. (A) The available energy in an isolated system for all irreversible (real) processes decreases (B) The efficiency of a Carnot engine increases, if the sink temperature is decreased (C) The reversible work for compression in non-flow process under isothermal condition is the change in Helmholtz free energy (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) The available energy in an isolated system for all irreversible (real) processes decreases (B) The efficiency of a Carnot engine increases, if the sink temperature is decreased ... condition is the change in Helmholtz free energy (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Description : PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Last Answer : C) Reversible and adiabatic

Why entropy change for a reversible adiabatic process is zero ?

Description : Why entropy change for a reversible adiabatic process is zero ?

Last Answer : Because there is no heat transfer in this process.

Throttling process is a/an __________ process. (A) Reversible and isothermal (B) Irreversible and constant enthalpy (C) Reversible and constant entropy (D) Reversible and constant enthalpy

Description : Throttling process is a/an __________ process. (A) Reversible and isothermal (B) Irreversible and constant enthalpy (C) Reversible and constant entropy (D) Reversible and constant enthalpy

Last Answer : (B) Irreversible and constant enthalpy

How does an adiabatic process compare to an isentropic process?  A. Adiabatic heat transfer is not equal to zero; isentropic heat transfer is zero  B. Both heat transfer = 0; isentropic: reversible  C. Adiabatic heat transfer = 0; isentropic: heat transfer is not equal to zero  D. Both heat transfer is not equal to zero; isentropic: irreversible

Description : How does an adiabatic process compare to an isentropic process?  A. Adiabatic heat transfer is not equal to zero; isentropic heat transfer is zero  B. Both heat transfer = 0; isentropic: reversible  ... is not equal to zero  D. Both heat transfer is not equal to zero; isentropic: irreversible

Last Answer : Both heat transfer = 0; isentropic: reversible

Pick out the wrong statement. (A) Cp of monatomic gases such as metallic vapor is about 5 kcal/kg.atom (B) The heat capacity of solid inorganic substance is exactly equal to the heatcapacity of the substance in the molten state(C) There is an increase in entropy, when a spontaneous change occurs in anisolated system(D) At absolute zero temperature, the heat capacity for many pure crystallinesubstances is zero

Description : Pick out the wrong statement. (A) Cp of monatomic gases such as metallic vapor is about 5 kcal/kg.atom (B) The heat capacity of solid inorganic substance is exactly equal to the ... isolated system (D) At absolute zero temperature, the heat capacity for many pure crystalline substances is zero

Last Answer : (C) There is an increase in entropy, when a spontaneous change occurs in an isolated system

Pick out the correct statement. (A) Like internal energy and enthalpy, the absolute value of standard entropy for elementary substances is zero (B) Melting of ice involves increase in enthalpy and a decrease in randomness (C) The internal energy of an ideal gas depends only on its pressure (D) Maximum work is done under reversible conditions

Description : Pick out the correct statement. (A) Like internal energy and enthalpy, the absolute value of standard entropy for elementary substances is zero (B) Melting of ice involves increase in enthalpy and ... of an ideal gas depends only on its pressure (D) Maximum work is done under reversible conditions

Last Answer : (D) Maximum work is done under reversible conditions

Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of a system decreases with the evolution of heat (C) Change of internal energy is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Description : Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of ... is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Last Answer : (D) The eccentric factor for all materials is always more than one

Carnot cycle is  (a) a reversible cycle (ft) an irreversible cycle  (c) a semi-reversible cycle  (d) a quasi static cycle  (e) an adiabatic irreversible cycle.

Description : Carnot cycle is  (a) a reversible cycle (ft) an irreversible cycle  (c) a semi-reversible cycle  (d) a quasi static cycle  (e) an adiabatic irreversible cycle.

Last Answer : Answer : a

When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic

Description : When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic

Last Answer : (A) Reversible

Entropy change for an adiabatic reversible process is

Description : Entropy change for an adiabatic reversible process is

Last Answer : Entropy change for an adiabatic reversible process is A. Positive B. Zero C. Negative D. Constant

The term “isentropic process” used in thermodynamics implies what?  A. Reversible adiabatic process  B. Externally reversible, adiabatic process  C. Internally reversible, adiabatic process  D. Irreversible adiabatic process

Description : The term “isentropic process” used in thermodynamics implies what?  A. Reversible adiabatic process  B. Externally reversible, adiabatic process  C. Internally reversible, adiabatic process  D. Irreversible adiabatic process

Last Answer : Internally reversible, adiabatic process

The value of n = 1 in the polytropic process indicates it to be  (a) reversible process  (b) isothermal process  (c) adiabatic process  (d) irreversible process  (e) free expansion process.

Description : The value of n = 1 in the polytropic process indicates it to be  (a) reversible process  (b) isothermal process  (c) adiabatic process  (d) irreversible process  (e) free expansion process.

Last Answer : Answer : b

Generation of heat by friction is an example of a/an __________ change. (A) Isothermal (B) Irreversible (C) Adiabatic (D) Reversible

Description : Generation of heat by friction is an example of a/an __________ change. (A) Isothermal (B) Irreversible (C) Adiabatic (D) Reversible

Last Answer : (B) Irreversible

Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, work required decreases as the temperature of the refrigerator and the temperature at which heat is rejected increases (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Description : Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, ... (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Last Answer : (A) A refrigeration cycle violates the second law of thermodynamics

Pick out the wrong statement. (A) Visible radiation provides the necessary activation energy in photochemical reactions (B) The order and molecularity of a complex reaction may not be the same (C) For a second order reaction, the slope of the graph/plot between rate and (concentration) is equal to the rate constant (k) (D) Molecularity of the reaction is always a whole number greater than zero

Description : Pick out the wrong statement. (A) Visible radiation provides the necessary activation energy in photochemical reactions (B) The order and molecularity of a complex reaction may not be the same (C) For ... rate constant (k) (D) Molecularity of the reaction is always a whole number greater than zero

Last Answer : (B) The order and molecularity of a complex reaction may not be the same

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

The entropy __________ in an irreversible cyclic process.  A. remains constant  B. decreases  C. increases

Description : The entropy __________ in an irreversible cyclic process.  A. remains constant  B. decreases  C. increases

Last Answer : Answer: C

Pick out the wrong statemen(A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an irreversible series reaction (C) The fractional conversion at any time is same for both the constant as well as the variable volume system in case of an irreversible unimolecular type first order reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Description : Pick out the wrong statemen (A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an ... reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Last Answer : (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

The irreversible reaction is a special case of reversible reaction, if the(A) Equilibrium constant is 1(B) Conversion of the reactant at equilibrium condition is zero(C) Reactant concentration at equilibrium condition is zero(D) All (A), (B) and (C)

Description : The irreversible reaction is a special case of reversible reaction, if the(A) Equilibrium constant is 1 (B) Conversion of the reactant at equilibrium condition is zero (C) Reactant concentration at equilibrium condition is zero (D) All (A), (B) and (C)

Last Answer : (C) Reactant concentration at equilibrium condition is zero

The irreversible reaction, X → Y, is the special case of the reversible reaction, X ⇌ Y, in which the (A) Equilibrium constant is infinite (B) Fractional conversion of 'A' at equilibrium is unity (C) Concentration of 'A' at equilibrium is zero (D) All (A), (B) and (C)

Description : The irreversible reaction, X → Y, is the special case of the reversible reaction, X ⇌ Y, in which the (A) Equilibrium constant is infinite (B) Fractional conversion of 'A' at equilibrium is unity (C) Concentration of 'A' at equilibrium is zero (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

During the adiabatic process, which of the following is the change in entropy?  a. zero  b. greater than zero  c. less than zero  d. infinity

Description : During the adiabatic process, which of the following is the change in entropy?  a. zero  b. greater than zero  c. less than zero  d. infinity

Last Answer : zero

Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature

Stirling and Ericsson cycles are  (a) reversible cycles  (b) irreversible cycles  (c) quasi-static cycles  (d) semi-reversible cycles  (e) adiabatic irreversible cycles.

Description : Stirling and Ericsson cycles are  (a) reversible cycles  (b) irreversible cycles  (c) quasi-static cycles  (d) semi-reversible cycles  (e) adiabatic irreversible cycles.

Last Answer : Answer : a

As the time is passing, entropy of the universe (A) Is increasing (B) Is decreasing (C) Remain constant (D) Data insufficient, can't be predicted

Description : As the time is passing, entropy of the universe (A) Is increasing (B) Is decreasing (C) Remain constant (D) Data insufficient, can't be predicted

Last Answer : (A) Is increasing

Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Description : Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Last Answer : Answer : a

Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : c

Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : a

Pick out the correct statement. (A) Entropy and enthalpy are path functions (B) In a closed system, the energy can be exchanged with the surrounding, while matter cannot be exchanged (C) All the natural processes are reversible in nature (D) Work is a state function

Description : Pick out the correct statement. (A) Entropy and enthalpy are path functions (B) In a closed system, the energy can be exchanged with the surrounding, while matter cannot be exchanged (C) All the natural processes are reversible in nature (D) Work is a state function

Last Answer : (C) All the natural processes are reversible in nature

Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the reaction is practically irreversible in nature (C) The intercept of the Arrhenius plot is called the 'activation energy' (D) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

An irreversible process (A) Is the analog of linear frictionless motion in machines (B) Is an idealised visualisation of behaviour of a system (C) Yields the maximum amount of work (D) Yields an amount of work less than that of a reversible process

Description : An irreversible process (A) Is the analog of linear frictionless motion in machines (B) Is an idealised visualisation of behaviour of a system (C) Yields the maximum amount of work (D) Yields an amount of work less than that of a reversible process

Last Answer : (D) Yields an amount of work less than that of a reversible process

The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Description : The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Last Answer : (D) Simultaneous heating and expansion of an ideal gas

Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration of A (B) Transition state theory approaches the problem of calculating reaction rates by concentrating on the idea of activated complexes (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases (D) If the rate of an irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Description : Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration ... irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Last Answer : (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases

Specific heat of a gas for a reversible adiabatic process is (A) Negative (B) Zero (C) Infinity (D) None of these

Description : Specific heat of a gas for a reversible adiabatic process is (A) Negative (B) Zero (C) Infinity (D) None of these

Last Answer : (B) Zero

For a spontaneous natural process at constant temperature and pressure, the free energy of the system always (A) Increases (B) Decreases (C) Remain constant (D) Increases to a maximum before decreasing

Description : For a spontaneous natural process at constant temperature and pressure, the free energy of the system always (A) Increases (B) Decreases (C) Remain constant (D) Increases to a maximum before decreasing

Last Answer : : Option A

Assertion :- Entropy is always constant for a closed system. Reason :- Closed system is always reversible.

Description : Assertion :- Entropy is always constant for a closed system. Reason :- Closed system is always reversible.

Last Answer : Assertion :- Entropy is always constant for a closed system. Reason :- Closed system is always ... D. If both Assertion & Reason are false.

Which of the following occurs in a reversible polytrophic process?  a. Enthalpy remains constant  b. Internal energy does not change  c. Some heat transfer occurs  d. Entropy remains constant

Description : Which of the following occurs in a reversible polytrophic process?  a. Enthalpy remains constant  b. Internal energy does not change  c. Some heat transfer occurs  d. Entropy remains constant

Last Answer : Some heat transfer occurs

Which of the following is not correct for a reversible adiabatic process? (A) TV γ-1 = constant (B) p 1-γ .T Y = constant (C) PV γ = constant (D) None of these

Description : Which of the following is not correct for a reversible adiabatic process? (A) TV γ-1 = constant (B) p 1-γ .T Y = constant (C) PV γ = constant (D) None of these

Last Answer : (D) None of these

In polytropic process (PV n = constant), if n = 1; it means a/an __________ process. (A) Adiabatic (B) Reversible (C) Isothermal (D) None of these

Description : In polytropic process (PV n = constant), if n = 1; it means a/an __________ process. (A) Adiabatic (B) Reversible (C) Isothermal (D) None of these

Last Answer : (C) Isothermal

What happens in a reversible adiabatic expansion process? (A) Heating takes place (B) Cooling takes place (C) Pressure is constant (D) Temperature is constant

Description : What happens in a reversible adiabatic expansion process? (A) Heating takes place (B) Cooling takes place (C) Pressure is constant (D) Temperature is constant

Last Answer : (B) Cooling takes place

In the equation, PVn = constant, if the value of n = ± ∞, then it represents a reversible __________ process. (A) Adiabatic (B) Isometric (C) Isentropic (D) Isothermal

Description : In the equation, PVn = constant, if the value of n = ± ∞, then it represents a reversible __________ process. (A) Adiabatic (B) Isometric (C) Isentropic (D) Isothermal

Last Answer : (B) Isometric

In the equation PVn = constant, if the value of n = y = Cp/Cv, then it represents a reversible __________ process. (A) Isothermal (B) Adiabatic (C) Isentropic (D) Polytropic

Description : In the equation PVn = constant, if the value of n = y = Cp/Cv, then it represents a reversible __________ process. (A) Isothermal (B) Adiabatic (C) Isentropic (D) Polytropic

Last Answer : (C) Isentropic

In the equation, PVn = constant, if the value of n = 1, then it represents a reversible __________ process. (A) Isothermal (B) Isobaric (C) Polytropic (D) Adiabatic

Description : In the equation, PVn = constant, if the value of n = 1, then it represents a reversible __________ process. (A) Isothermal (B) Isobaric (C) Polytropic (D) Adiabatic

Last Answer : (A) Isothermal