Inorganic soils with low compressibility are represented by (A) MH (B) SL (C) ML (D) CH

Inorganic soils with low compressibility are represented by
(A) MH
(B) SL
(C) ML
(D) CH
by

1 Answer

Answer :

(C) ML
by

Related questions

Compressibility of sandy soils is (A) Almost equal to that of clayey soils (B) Much greater than that of clayey soils (C) Much less than that of clayey soils (D) None of the above

Description : Compressibility of sandy soils is (A) Almost equal to that of clayey soils (B) Much greater than that of clayey soils (C) Much less than that of clayey soils (D) None of the above

Last Answer : (C) Much less than that of clayey soils

Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for different types of soils but same for a soil under different states of consolidation (D) Independent of type of soil but depends on the stress history of soil

Description : Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for ... of consolidation (D) Independent of type of soil but depends on the stress history of soil

Last Answer : Answer: Option B

The consolidation time for soils (A) Increases with increasing compressibility (B) Decreases with increasing permeability (C) Increases rapidly with increasing size of soil mass (D) All the above

Description : The consolidation time for soils (A) Increases with increasing compressibility (B) Decreases with increasing permeability (C) Increases rapidly with increasing size of soil mass (D) All the above

Last Answer : Answer: Option D

If a soil undergoes a change in shape and volume by application of external loads over it, but recovers its shape and volume immediately after removal of the load, the property of the soil is said to be (A) Resilience of soils (B) Elasticity of soils (C) Compressibility of soils (D) None of these

Description : If a soil undergoes a change in shape and volume by application of external loads over it, but recovers its shape and volume immediately after removal of the load, the property of the soil is said to ... Resilience of soils (B) Elasticity of soils (C) Compressibility of soils (D) None of these

Last Answer : Answer: Option B

In soils having same values of plasticity index, if liquid limit is increased, then(A) Compressibility and permeability decrease and dry strength increases (B) Compressibility, permeability and dry strength decrease (C) Compressibility, permeability and dry strength increase (D) Compressibility and permeability increase and dry strength decreases

Description : In soils having same values of plasticity index, if liquid limit is increased, then (A) Compressibility and permeability decrease and dry strength increases (B) Compressibility, ... permeability and dry strength increase (D) Compressibility and permeability increase and dry strength decreases

Last Answer : Answer: Option D

Consider the following statements relating to foundations on expansive soils: 1. Strength should be improved and compressibility should be reduced. 2. Compressibility should be increased. 3. No stabilization should be done. Which of these statements is/are correct? (a) 1, 2 & 3 (b) 2 only (c) 1 only (d) 3 only

Description : Consider the following statements relating to foundations on expansive soils: 1. Strength should be improved and compressibility should be reduced. 2. Compressibility should be increased. 3. No stabilization should be done. Which of these ... ? (a) 1, 2 & 3 (b) 2 only (c) 1 only (d) 3 only

Last Answer : (c) 1 only

Alluvial soils are rich soil for crop cultivation but are poor in– (1) humus (2) nitrogen and humus (3) organic material (4) inorganic material

Description : Alluvial soils are rich soil for crop cultivation but are poor in– (1) humus (2) nitrogen and humus (3) organic material (4) inorganic material

Last Answer : (2) nitrogen and humus Explanation: Alluvial soils are fertile soils composed of sediments deposited by rivers and the waves. However, they are usually deficient in nitrogen and ... With suitable irrigation, fertilizers and proper agricultural practices, alluvial soils are generally very fertile.

Alluvial soils are rich soil for crop cultivation but are poor in (1) humus (2) nitrogen and humus (3) organic material (4) inorganic material

Description : Alluvial soils are rich soil for crop cultivation but are poor in (1) humus (2) nitrogen and humus (3) organic material (4) inorganic material

Last Answer : nitrogen and humus

The organic reaction represented by equation CH3 - CH = O + H2NOH gives CH3 - CH - NH + H20O is an example of?

Description : The organic reaction represented by equation CH3 - CH = O + H2NOH gives CH3 - CH - NH + H20O is an example of?

Last Answer : a condensation reaction

The normal serum inorganic phosphorous level is (A) 1.5–2.5 mg/100 ml (B) 2.5–4.5 mg/100 ml (C) 4.5–6.5 mg/100 ml (D) 0.5–1.5 mg/100 ml

Description : The normal serum inorganic phosphorous level is (A) 1.5–2.5 mg/100 ml (B) 2.5–4.5 mg/100 ml (C) 4.5–6.5 mg/100 ml (D) 0.5–1.5 mg/100 ml

Last Answer : Answer : B

Most commonly used growth retardants are a. Phosphon b. MH c. Caumarin d. None of above

Description : Most commonly used growth retardants are a. Phosphon b. MH c. Caumarin d. None of above

Last Answer : Phosphon

Chemical use for nipping of gram is a. MH b. GA c. TIBA d. ABA

Description : Chemical use for nipping of gram is a. MH b. GA c. TIBA d. ABA

Last Answer : c. TIBA

Plant growth regulator used for sucker control in Tobacco is a. IAA b. ABA c. GA d. MH

Description : Plant growth regulator used for sucker control in Tobacco is a. IAA b. ABA c. GA d. MH

Last Answer : d. MH

V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Description : V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Last Answer : Ans: R=40 ohm, L=33.3 micro farads

Calculate the characteristics impedance for a transmission line having L=0.5 mH/Km, C=0.08 µF and negligible R and G.

Description : Calculate the characteristics impedance for a transmission line having L=0.5 mH/Km, C=0.08 µF and negligible R and G.

Last Answer : L=0.5 mH/Km C=0.08 µF

A 800 kV transmission line is having per phase line inductance of 1.1 mH/km and per phase line capacitance

Description : A 800 kV transmission line is having per phase line inductance of 1.1 mH/km and per phase line capacitance of 11.68 nF/km. Ignoring the length of the line, its ideal power transfer capability in MW is (A) 1204 MW (B) 1504 MW (C) 2085 MW (D) 2606 MW

Last Answer : A 800 kV transmission line is having per phase line inductance of 1.1 mH/km and per phase line capacitance of 11.68 nF/km. Ignoring the length of the line, its ideal power transfer capability in MW is 2085 MW

A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities

Description : A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities remaining the same, the inductance will be:

Last Answer : A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities remaining the same, the inductance will be: 24 mH

A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V,

Description : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum when the supply frequency is 1 kHz. The ... (A) 40, 400 Hz (B) 10, 100 Hz (C) 20, 50 Hz (D) 50, 20 Hz

Last Answer : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum ... supply frequency is 1 kHz. The approximate values of Q-factor and bandwidth are, respectively 20, 50 Hz

The current in a 200 mH coil increases from 2 to 5 A in 0.1 Second. What is rate of change of current?

Description : The current in a 200 mH coil increases from 2 to 5 A in 0.1 Second. What is rate of change of current? A. 30 A/s B. 20 A/s C. 10 A/s D. none of these

Last Answer : The current in a 200 mH coil increases from 2 to 5 A in 0.1 Second. 30 A/s is rate of change of current.

The coefficient of coupling between two coils is 0.45. The first coil has an inductance of 75 mH and the second...

Description : The coefficient of coupling between two coils is 0.45. The first coil has an inductance of 75 mH and the second coil has an inductance of 105 mH. What is the mutual inductance between the coils?  (1) 3.54 mH (2) 7.88 mH (3) 39.9 mH (4) 189.3 mH

Last Answer : The coefficient of coupling between two coils is 0.45. The first coil has an inductance of 75 mH and the second coil has an inductance of 105 mH. 39.9 mH is the mutual inductance between the coils.

Two coils in differential connection have self-inductance of 2 mH and 4 ...

Description : Two coils in differential connection have self-inductance of 2 mH and 4 mH and a mutual inductance of 0.15 mH. The equivalent inductance of the combination is

Last Answer : Two coils in differential connection have self-inductance of 2 mH and 4 mH and a mutual inductance of 0.15 mH. The equivalent inductance of the combination is 5.7 mH.

Two similar coils have self inductance of 1 mH each. Coefficient of ...

Description : Two similar coils have self inductance of 1 mH each. Coefficient of coupling is 0.5. The mutual inductance M is

Last Answer : Two similar coils have self inductance of 1 mH each. Coefficient of coupling is 0.5. The mutual inductance M is 0.5 mH.

Coefficient of consolidation of a soil is affected by (A) Compressibility (B) Permeability (C) Both compressibility and permeability (D) None of the above

Description : Coefficient of consolidation of a soil is affected by (A) Compressibility (B) Permeability (C) Both compressibility and permeability (D) None of the above

Last Answer : (C) Both compressibility and permeability

The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Description : The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Last Answer : (A) 0.01

The compressibility of clays is caused due to: (A) Expulsion of double layer water from in between the grains (B) Sliping of particles to new positions of greater density (C) Bending of particles as elastic sheets (D) All the above

Description : The compressibility of clays is caused due to: (A) Expulsion of double layer water from in between the grains (B) Sliping of particles to new positions of greater density (C) Bending of particles as elastic sheets (D) All the above

Last Answer : (D) All the above

Select the correct statement. (A) Coefficient of compressibility of an over-consolidated clay is less than that of a normally consolidated clay (B) Coefficient of compressibility of an over-consolidated clay is greater than that of a normally consolidated clay (C) Coefficient of compressibility is constant for any clay (D) None of the above

Description : Select the correct statement. (A) Coefficient of compressibility of an over-consolidated clay is less than that of a normally consolidated clay (B) Coefficient of compressibility of an over-consolidated clay ... (C) Coefficient of compressibility is constant for any clay (D) None of the above

Last Answer : Answer: Option A

If e0, e 0' have their usual meanings, the coefficient of compressibility (ac ), is given by (A) ac = (e - e0)/(e' + e0') (B) ac = (e0 - e)/( - 0') (C) ac = ( - 0')/(e0 - e) (D) ac = ( 0' - )/(e - e0)

Description : If e0, e 0' have their usual meanings, the coefficient of compressibility (ac ), is given by (A) ac = (e - e0)/(e' + e0') (B) ac = (e0 - e)/( - 0') (C) ac = ( - 0')/(e0 - e) (D) ac = ( 0' - )/(e - e0)

Last Answer : Answer: Option B

the coefficients of volume change and compressibility of a soil sample are 6.75 × 10-2 and 3 × 10-2 respectively, the void ratio of the soil sample, is (A) 1.10 (B) 1.15 (C) 1.20 (D) 1.30

Description : the coefficients of volume change and compressibility of a soil sample are 6.75 × 10-2 and 3 × 10-2 respectively, the void ratio of the soil sample, is (A) 1.10 (B) 1.15 (C) 1.20 (D) 1.30

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Coefficient of compressibility is the decrease in void ratio per unit increase of pressure (B) The percent settlement at any time is called degree of consolidation (C) Time factor is a dimensionless quantity (D) All the above

Description : Pick up the correct statement from the following: (A) Coefficient of compressibility is the decrease in void ratio per unit increase of pressure (B) The percent settlement at any time is called degree of consolidation (C) Time factor is a dimensionless quantity (D) All the above

Last Answer : Answer: Option D

The coefficient of compressibility of soil, is the ratio of (A) Stress to strain (B) Strain to stress (C) Stress to settlement (D) Rate of loading to that of settlement

Description : The coefficient of compressibility of soil, is the ratio of (A) Stress to strain (B) Strain to stress (C) Stress to settlement (D) Rate of loading to that of settlement

Last Answer : Answer: Option B

Falling drops of water become spheres due to the property of (A) Surface tension of water (B) Compressibility of water (C) Capillarity of water (D) Viscosity of water

Description : Falling drops of water become spheres due to the property of (A) Surface tension of water (B) Compressibility of water (C) Capillarity of water (D) Viscosity of water

Last Answer : Answer: Option A

The property of a liquid which offers resistance to the movement of one layer of liquid over another adjacent layer of liquid, is called (A) Surface tension (B) Compressibility (C) Capillarity (D) Viscosity

Description : The property of a liquid which offers resistance to the movement of one layer of liquid over another adjacent layer of liquid, is called (A) Surface tension (B) Compressibility (C) Capillarity (D) Viscosity

Last Answer : Answer: Option D

The buoyancy depends upon the (A) Weight of the liquid displaced (B) Pressure with which the liquid is displaced (C) Viscosity of the liquid (D) Compressibility of the liquid

Description : The buoyancy depends upon the (A) Weight of the liquid displaced (B) Pressure with which the liquid is displaced (C) Viscosity of the liquid (D) Compressibility of the liquid

Last Answer : Answer: Option A

The force per unit length is the unit of (A) Surface tension (B) Compressibility (C) Capillarity (D) Viscosity

Description : The force per unit length is the unit of (A) Surface tension (B) Compressibility (C) Capillarity (D) Viscosity

Last Answer : Answer: Option A

Property of a fluid by which its own molecules are attracted is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Description : Property of a fluid by which its own molecules are attracted is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Last Answer : Answer: Option B

The volumetric change of the fluid caused by a resistance is known as (A) Volumetric strain (B) Volumetric index (C) Compressibility (D) Adhesion

Description : The volumetric change of the fluid caused by a resistance is known as (A) Volumetric strain (B) Volumetric index (C) Compressibility (D) Adhesion

Last Answer : Answer: Option C

Property of a fluid by which molecules of different kinds of fluids are attracted to each other is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Description : Property of a fluid by which molecules of different kinds of fluids are attracted to each other is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Last Answer : Answer: Option A

The ratio of specific weight of a liquid to the specific weight of pure water at a standard temperature is called (A) Density of liquid (B) Specific gravity of liquid (C) Compressibility of liquid (D) Surface tension of liquid

Description : The ratio of specific weight of a liquid to the specific weight of pure water at a standard temperature is called (A) Density of liquid (B) Specific gravity of liquid (C) Compressibility of liquid (D) Surface tension of liquid

Last Answer : Answer: Option B

The value of the coefficient of compressibility for water at ordinary pressure and temperature in kg/cm is equal to (A) 2100 (B) 2700 (C) 10,000 (D) 21,000

Description : The value of the coefficient of compressibility for water at ordinary pressure and temperature in kg/cm is equal to (A) 2100 (B) 2700 (C) 10,000 (D) 21,000

Last Answer : Answer: Option D

The variation in the volume of a liquid with the variation of pressure is called its (A) Surface tension (B) Compressibility (C) Capillarity (D) Viscosity

Description : The variation in the volume of a liquid with the variation of pressure is called its (A) Surface tension (B) Compressibility (C) Capillarity (D) Viscosity

Last Answer : Answer: Option B

The continuity equation is connected with (A) Open channel/pipe flow (B) Compressibility of fluids (C) Conservation of mass (D) Steady/unsteady flow

Description : The continuity equation is connected with (A) Open channel/pipe flow (B) Compressibility of fluids (C) Conservation of mass (D) Steady/unsteady flow

Last Answer : Answer: Option C

The property of a fluid which enables it to resist tensile stress is known as (A) Compressibility (B) Surface tension (C) Cohesion (D) Adhesion

Description : The property of a fluid which enables it to resist tensile stress is known as (A) Compressibility (B) Surface tension (C) Cohesion (D) Adhesion

Last Answer : Answer: Option C

Consider the following statements: 1. Consolidation time increase with increasing compressibility 2. Consolidation time decreases with increasing permeability. 3. Consolidation time is dependent on the magnitude of stress increase. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Consolidation time increase with increasing compressibility 2. Consolidation time decreases with increasing permeability. 3. Consolidation time is dependent on the magnitude of stress increase. Which of these ... (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

Mercury is an ideal barometric fluid mainly due to its(A) High density (B) Low compressibility (C) Low capillary action (D) Very low vapor pressure

Description : Mercury is an ideal barometric fluid mainly due to its (A) High density (B) Low compressibility (C) Low capillary action (D) Very low vapor pressure

Last Answer : (D) Very low vapor pressure

Pick up the correct statement from the following: (A) A maximum value of dry density is obtained at optimum water content (B) At low value of water content most soils tend to be stiff (C) At high water content, the dry density decreases with an increase of water content (D) All the above

Description : Pick up the correct statement from the following: (A) A maximum value of dry density is obtained at optimum water content (B) At low value of water content most soils tend to be stiff (C) At high water content, the dry density decreases with an increase of water content (D) All the above

Last Answer : Answer: Option D

In soils possessing low bearing capacity, the type of foundation generally provided, is (A) Column footing (B) Grillage footing (C) Raft footing (D) All the above

Description : In soils possessing low bearing capacity, the type of foundation generally provided, is (A) Column footing (B) Grillage footing (C) Raft footing (D) All the above

Last Answer : Option D

Which of the following process is suitable for making injection molding tools? a.SL b.SLS c.EBM d.FDM

Description : Which of the following process is suitable for making injection molding tools? a.SL b.SLS c.EBM d.FDM

Last Answer : b.SLS

How to open hood on 84 mercedes benze 380 sl?

Description : How to open hood on 84 mercedes benze 380 sl?

Last Answer : there is a primary hood release lever in the driver's side kick panel and a secondary release accessed through the star on the front grill. First release the hood from the lever inside the car and then reach through the driver's side of the hood star to release the secondary latch

How to open hood on 1984 mercedes benze 380 sl?

Description : How to open hood on 1984 mercedes benze 380 sl?

Last Answer : there is a primary hood release lever in the driver's side kick panel and a secondary release accessed through the star on the front grill. First release the hood from the lever inside the car and then reach through the driver's side of the hood star to release the secondary latch

Printer and scanner SL-M2070

Description : Hello, please advise. I have a printer with a SL-M2070 scanner. The printer is working normally, but I cannot operate the scanner. In the settings I have already done manage - activate, restart and still does not scan. Can anyone advise ?: Thank you :-)

Last Answer : Need Answer