The degree of static indeterminacy of a rigid-jointed space frame is (A) m + r - 2j (B) m + r - 3j (C) 3m + r - 3j (D) 6m + r - 6j Where m, r and j have their usual meanings

The degree of static indeterminacy of a rigid-jointed space frame is
(A) m + r - 2j
(B) m + r - 3j
(C) 3m + r - 3j
(D) 6m + r - 6j
Where m, r and j have their usual meanings
by

1 Answer

Answer :

(D) 6m + r - 6j
by

Related questions

The degree of static indeterminacy of a pin-jointed space frame is given by m r j number of joints) (A) m + r - 2j (B) m + r - 3j (C) 3m + r - 3j (D) m + r + 3j

Description : The degree of static indeterminacy of a pin-jointed space frame is given by m r j number of joints) (A) m + r - 2j (B) m + r - 3j (C) 3m + r - 3j (D) m + r + 3j

Last Answer : (B) m + r - 3j

If there are m unknown member forces, r unknown reaction components and j number of joints, then the degree of static indeterminacy of a pin-jointed plane frame is given by (A) m + r + 2j (B) m - r + 2j (C) m + r - 2j (D) m + r - 3j

Description : If there are m unknown member forces, r unknown reaction components and j number of joints, then the degree of static indeterminacy of a pin-jointed plane frame is given by (A) m + r + 2j (B) m - r + 2j (C) m + r - 2j (D) m + r - 3j

Last Answer : (C) m + r - 2j

A rigid-jointed plane frame is stable and statically determinate if (A) (m + r) = 2j (B) (m + r) = 3j (C) (3m + r) = 3j (D) (m + 3r) = 3j Where m is number of members, r is reaction components and j is number of joints

Description : A rigid-jointed plane frame is stable and statically determinate if (A) (m + r) = 2j (B) (m + r) = 3j (C) (3m + r) = 3j (D) (m + 3r) = 3j Where m is number of members, r is reaction components and j is number of joints

Last Answer : (C) (3m + r) = 3j

The degree of kinematic indeterminacy of a pin-jointed space frame is (A) 2j - r(B) 3j - r(C) j - 2r(D) j - 3rWhere j is number of joints and r is reaction components

Description : The degree of kinematic indeterminacy of a pin-jointed space frame is (A) 2j - r (B) 3j - r (C) j - 2r (D) j - 3r Where j is number of joints and r is reaction components

Last Answer : (B) 3j - r

Degree of kinematic indeterminacy of a pin-jointed plane frame is given by (A) 2j - r (B) j - 2r (C) 3j - r (D) 2j + r

Description : Degree of kinematic indeterminacy of a pin-jointed plane frame is given by (A) 2j - r (B) j - 2r (C) 3j - r (D) 2j + r

Last Answer : (A) 2j - r

If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is (A) Unstable (B) Stable and statically determinate (C) Stable and statically indeterminate (D) None of the above

Description : If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is (A) Unstable (B) Stable and statically determinate (C) Stable and statically indeterminate (D) None of the above

Last Answer : (A) Unstable

Degree of static indeterminacy of a rigid-jointed plane frame having 15 members, 3 reaction components and 14 joints is (A) 2 (B) 3 (C) 6 (D) 8

Description : Degree of static indeterminacy of a rigid-jointed plane frame having 15 members, 3 reaction components and 14 joints is (A) 2 (B) 3 (C) 6 (D) 8

Last Answer : (C) 6

A truss containing j joints and m members, will be a simple truss if (A) m = 2j - 3 (B) j = 2m - 3 (C) m = 3j - 2 (D) j = 3m - 2

Description : A truss containing j joints and m members, will be a simple truss if  (A) m = 2j - 3  (B) j = 2m - 3  (C) m = 3j - 2  (D) j = 3m - 2 

Last Answer : (A) m = 2j - 3 

A pin-jointed plane frame is unstable if (A) (m + r) < 2j (B) (m + r) = 2j (C) (m + r) > 2j (D) None of the above Where m is number of members, r is reaction components and j is number of joints

Description : A pin-jointed plane frame is unstable if (A) (m + r) < 2j (B) (m + r) = 2j (C) (m + r) > 2j (D) None of the above Where m is number of members, r is reaction components and j is number of joints

Last Answer : (A) (m + r) < 2j

A couple consists of a force P acting at a point A whose coordinates are (-1,2,4) m and force - F acting at a point whose coordinates are (2,3, -2)m. If F = 3i + 2j - 4k in kg units the moment of the couple in kg - m units would be a.8i - 6j - 3k b.12i - 3j + k c.16i - 12j - 6k d.4i - 3j + k e.8i + 5j + 3k

Description : A couple consists of a force P acting at a point A whose coordinates are (-1,2,4) m and force - F acting at a point whose coordinates are (2,3, -2)m. If F = 3i + 2j - 4k in kg units the moment of the couple in kg - m ... .8i - 6j - 3k b.12i - 3j + k c.16i - 12j - 6k d.4i - 3j + k e.8i + 5j + 3k

Last Answer : a. 8i - 6j - 3k

Show that vectors a = 2i + 3j + 6k, b = 3i - 6j + 2k and c = 6i + 2j - 3k are mutually perpendicular.

Description : Show that vectors a = 2i + 3j + 6k, b = 3i - 6j + 2k and c = 6i + 2j - 3k are mutually perpendicular.

Last Answer : Show that vectors a = 2i + 3j + 6k, b = 3i - 6j + 2k and c = 6i + 2j - 3k are mutually perpendicular.

If in a pin-jointed plane frame (m + r) > 2j, then the frame is (A) Stable and statically determinate (B) Stable and statically indeterminate (C) Unstable (D) None of the above

Description : If in a pin-jointed plane frame (m + r) > 2j, then the frame is (A) Stable and statically determinate (B) Stable and statically indeterminate (C) Unstable (D) None of the above

Last Answer : (B) Stable and statically indeterminate

The number of independent displacement components at each joint of a rigid-jointed space frame is (A) 1 (B) 2 (C) 3 (D) 6

Description : The number of independent displacement components at each joint of a rigid-jointed space frame is (A) 1 (B) 2 (C) 3 (D) 6

Last Answer : (D) 6

Number of unknown internal forces in each member of a rigid jointed plane frame is (A) 1 (B) 2 (C) 3 (D) 6

Description : Number of unknown internal forces in each member of a rigid jointed plane frame is (A) 1 (B) 2 (C) 3 (D) 6

Last Answer : (C) 3

Independent displacement components at each joint of a rigid-jointed plane frame are (A) Three linear movements (B) Two linear movements and one rotation (C) One linear movement and two rotations (D) Three rotations

Description : Independent displacement components at each joint of a rigid-jointed plane frame are (A) Three linear movements (B) Two linear movements and one rotation (C) One linear movement and two rotations (D) Three rotations

Last Answer : (B) Two linear movements and one rotation

If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2(D) D/6m(h1 - h2)3

Description : If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2 (D) D/6m(h1 - h2)3

Last Answer : (C) D/6m(h1 - h2)2

The degree of static indeterminacy up to which column analogy method can be used is (A) 2 (B) 3 (C) 4 (D) Unrestricted

Description : The degree of static indeterminacy up to which column analogy method can be used is (A) 2 (B) 3 (C) 4 (D) Unrestricted

Last Answer : (B) 3

A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where F is expressed in newton and s in metre.

Description : A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where F is expressed in newton and s in metre.

Last Answer : A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where ... and s in metre. Find the work done by the force.

If A = 5i + 6j + 4k and B = 2i - 2j + 3k determine the angle between A and B.

Description : If A = 5i + 6j + 4k and B = 2i - 2j + 3k determine the angle between A and B.

Last Answer : If A = 5i + 6j + 4k and B = 2i - 2j + 3k determine the angle between A and B.

Transform the vector A = 3i – 2j – 4k at P(2,3,3) to cylindrical coordinates a) -3.6j – 4k b) -3.6j + 4k c) 3.6j – 4k d) 3.6j + 4k

Description : Transform the vector A = 3i – 2j – 4k at P(2,3,3) to cylindrical coordinates a) -3.6j – 4k b) -3.6j + 4k c) 3.6j – 4k d) 3.6j + 4k

Last Answer : a) -3.6j – 4k

Pick up the correct statement from the following: (A) Mcg = M M 2 + r2 ) where letters carry their usual meanings (B) Tcp = m 2 + T2 )where letters carry their usual meanings (C) The torque which when acting alone would produce maximum shear stress equal to the maximum shear stress caused by the combined bending and torsion, is called equivalent torque (D) All the above

Description : Pick up the correct statement from the following:  (A) Mcg = M M 2  + r2 ) where letters carry their usual meanings  (B) Tcp = m 2  + T2 )where ... maximum shear stress caused by the combined bending and torsion, is called equivalent  torque  (D) All the above 

Last Answer : (D) All the above 

Determine the vector product of v1 = 2i + 3j - k and v2 = i + 2j - 3k are perpendicular to each other,

Description : Determine the vector product of v1 = 2i + 3j - k and v2 = i + 2j - 3k are perpendicular to each other,

Last Answer : Determine the vector product of v1 = 2i + 3j - k and v2 = i + 2j - 3k are perpendicular to each other, determine the value of a.

What is the volume of a parallelepiped whose sides are given by the vectors a 3i plus wj plus k b -i plus 3j and c 2i plus 2j plus 5k?

Description : What is the volume of a parallelepiped whose sides are given by the vectors a 3i plus wj plus k b -i plus 3j and c 2i plus 2j plus 5k?

Last Answer : What is the answer ?

The angular separation between the vectors A = 4i + 3j + 5k and B = i – 2j + 2k is (in degrees) a) 65.8 b) 66.8 c) 67.8 d) 68.8

Description : The angular separation between the vectors A = 4i + 3j + 5k and B = i – 2j + 2k is (in degrees) a) 65.8 b) 66.8 c) 67.8 d) 68.8

Last Answer : c) 67.8

Find the cost of digging a cuboidal pit 8m long, 6m broad and 3m deep at the rate of Rs 30 per m3 -Maths 9th

Description : Find the cost of digging a cuboidal pit 8m long, 6m broad and 3m deep at the rate of Rs 30 per m3 -Maths 9th

Last Answer : The given pit has its length(l) as 8m, width (b)as 6m and depth (h)as 3 m. Volume of cuboidal pit = l×b×h = (8×6×3) = 144 (using formula) Required Volume is 144 m3 Now, Cost of digging per m3 volume = Rs 30 Cost of digging 144 m3 volume = Rs (144×30) = Rs 4320

If e0, e 0' have their usual meanings, the coefficient of compressibility (ac ), is given by (A) ac = (e - e0)/(e' + e0') (B) ac = (e0 - e)/( - 0') (C) ac = ( - 0')/(e0 - e) (D) ac = ( 0' - )/(e - e0)

Description : If e0, e 0' have their usual meanings, the coefficient of compressibility (ac ), is given by (A) ac = (e - e0)/(e' + e0') (B) ac = (e0 - e)/( - 0') (C) ac = ( - 0')/(e0 - e) (D) ac = ( 0' - )/(e - e0)

Last Answer : Answer: Option B

According to Robert E. Horton, the equation of infiltration capacity curve, is (where letters carry their usual meanings) (A) f = fc (fo - fc ) e kt (B) f = ft - (fo - fc ) e -kt (C) f = ft + (fo - fc ) e -kt (D) f = f + (fo - fc ) ekt

Description : According to Robert E. Horton, the equation of infiltration capacity curve, is (where letters carry their usual meanings) (A) f = fc (fo - fc ) e kt (B) f = ft - (fo - fc ) e -kt (C) f = ft + (fo - fc ) e -kt (D) f = f + (fo - fc ) ekt

Last Answer : Answer: Option C

The elevation Z of the watershed is: (where letters carry their usual meanings) (A) Reduced level of the top most point of the basin (B) Reduced level of the lower most point of the basin (C) Average elevation of the highest and lowest point of the drainage basin (D) Obtained by the formula Z = + + + anzn)/A

Description : The elevation Z of the watershed is: (where letters carry their usual meanings) (A) Reduced level of the top most point of the basin (B) Reduced level of the lower most point of the basin (C) Average ... highest and lowest point of the drainage basin (D) Obtained by the formula Z = + + + anzn)/A

Last Answer : Answer: Option D

A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, the downstream 12 miles would then take only one hour less than the upstream 12 miles. What is the speed of the current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Description : A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, ... current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Last Answer : Answer-C Basic Formula: Speed of the stream = ½ (a-b) km/hr Explanation: Let the speed in still water be x m/hr Speed of stream be y m/hr Then, speed upstream = x-y m/hr and Speed downstream = x+y m/hr 12/x-y - ... 1] 3y^2 = 8 y so, y = 8/3 speed of the current = 8/3 m/hr = 2 (2/3) m/hr

With the usual meanings of letters, the equation V = 400 I (D10²/4) is used for determining the velocity of ground water flow in metres per day. It is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen's formula

Description : With the usual meanings of letters, the equation V = 400 I (D10²/4) is used for determining the velocity of ground water flow in metres per day. It is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen's formula

Last Answer : Answer: Option B

Given B= (10/r)i+( rcos θ) j+k in spherical coordinates. Find Cartesian points at (- 3,4,0) a) -2i + j b) 2i + k c) i + 2j d) –i – 2k

Description : Given B= (10/r)i+( rcos θ) j+k in spherical coordinates. Find Cartesian points at (- 3,4,0) a) -2i + j b) 2i + k c) i + 2j d) –i – 2k

Last Answer : a) -2i + j

The number of plastic hinges required in a structure of indeterminate status for a ‘mechanism’ to develop is (a) i (b) i + 1 ( c) i + 2 (d) i – 1 Where ‘i' is the degree of indeterminacy

Description : The number of plastic hinges required in a structure of indeterminate status for a ‘mechanism’ to develop is (a) i (b) i + 1 ( c) i + 2 (d) i – 1 Where ‘i' is the degree of indeterminacy

Last Answer : (b) i + 1

Longitudinal stress in a cylinder is given by [symbols have their usual meanings]. a) PD/2t b) 2PD/t c) PD/4t d) 4PD/t

Description : Longitudinal stress in a cylinder is given by [symbols have their usual meanings]. a) PD/2t b) 2PD/t c) PD/4t d) 4PD/t

Last Answer : c) PD/4t

Tangential stress in a cylinder is given by [symbols have their usual meanings]. a) PD/2t b) 2PD/t c) PD/4t d) 4PD/t

Description : Tangential stress in a cylinder is given by [symbols have their usual meanings]. a) PD/2t b) 2PD/t c) PD/4t d) 4PD/t

Last Answer : a) PD/2t

A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.Zero b.2i + 3j c.i - j - k d.i + j e.i + j + k

Description : A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.Zero b.2i + 3j c.i - j - k d.i + j e.i + j + k

Last Answer : c. i - j - k

A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k

Description : A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k

Last Answer : b. i + j + k

If A  = 2i - j + k and B = i + 2j - k are two vectors, find |A x B|.

Description : If A  = 2i - j + k and B = i + 2j - k are two vectors, find |A x B|.

Last Answer : If A = 2i - j + k and B = i + 2j - k are two vectors, find |A x B|.

Find the angle between the vectors A = i + 2j - k and  B = -i + j - 2k.

Description : Find the angle between the vectors A = i + 2j - k and  B = -i + j - 2k.

Last Answer : Find the angle between the vectors A = i + 2j - k and B = -i + j - 2k.

Given a  = i + 2j and b = 2i + j, what are the magnitudes of the two vectors? Are these two vectors equal?

Description : Given a  = i + 2j and b = 2i + j, what are the magnitudes of the two vectors? Are these two vectors equal?

Last Answer : Given \(\overset\rightarrow{a}\) = i + 2j and \(\overset\rightarrow{b}\) = 2i + j, ... magnitudes of the two vectors? Are these two vectors equal?

Find the power, given energy E = 2J and current density J = x 2 varies from x = 0 and x = 1. a) 1/3 b) 2/3 c) 1 d) 4/3

Description : Find the power, given energy E = 2J and current density J = x 2 varies from x = 0 and x = 1. a) 1/3 b) 2/3 c) 1 d) 4/3

Last Answer : b) 2/3

A race course is 250 m long. P and Q run a race and P wins by 4m. Q and R run over the same course and Q win by 3m. R and S run over it and S wins by 12m. If P and S run over it, then who would win and by how much? a) P by 4.82m b) S by 5.30m c) P by 7.25m d) Q by 6.54m

Description : A race course is 250 m long. P and Q run a race and P wins by 4m. Q and R run over the same course and Q win by 3m. R and S run over it and S wins by 12m. If P and S run over it, then who would win and by how much? a) P by 4.82m b) S by 5.30m c) P by 7.25m d) Q by 6.54m

Last Answer : B If P covers 250m, Q covers 246 m If Q covers 250m, R covers 247 m If S covers 250m, R covers 238m Now if Q covers 246 m, then R will cover =247/250*246=243.048 If R covers 243.048 m, then S will cover= ... 048=255.30 If P and S run over 250 m, then S win by =(255.30-250) S win by = 5.30 m

A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant active earth pressure will act at a distance of 2 m above the base and inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 6m. a) 17/6 b) -17/6 c) 13/6 d) -13/6

Description : Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 6m. a) 17/6 b) -17/6 c) 13/6 d) -13/6

Last Answer : d) -13/6

Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be shaped to properly located rigid parts of framework C. Areas used for guideline planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Description : Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be ... planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Last Answer : F. Depth of rest seats

The initial velocity of an object is vector u = 5i + 10j m/s. Its constant acceleration is vector a = 2i + 3j m/s^2.

Description : The initial velocity of an object is vector u = 5i + 10j m/s. Its constant acceleration is vector a = 2i + 3j m/s^2.

Last Answer : The initial velocity of an object is vector u = 5i + 10j m/s. Its constant acceleration is ... Determine the velocity and the displacement after 5 s.

What length of tarpaulin 3 m wide will be required to make conical tent of height 8 m and base radius 6m -Maths 9th

Description : What length of tarpaulin 3 m wide will be required to make conical tent of height 8 m and base radius 6m -Maths 9th

Last Answer : Solution: Height of conical tent, h = 8m Radius of base of tent, r = 6m Slant height of tent, l2 = (r2+h2) l2 = (62+82) = (36+64) = (100) or l = 10 Again, CSA of conical tent = πrl = (3.14 6 ... .2) 3] = 188.4 L-0.2 = 62.8 L = 63 Therefore, the length of the required tarpaulin sheet will be 63 m.

A man of height 160 cm walks at a rate of 1.1` m/sec from a lamp post which 6m high. Find the rate at which the length of his shadow increases when he

Description : A man of height 160 cm walks at a rate of 1.1` m/sec from a lamp post which 6m high. Find the rate at which the length of his shadow increases when he

Last Answer : A man of height 160 cm walks at a rate of 1.1` m/sec from a lamp post which 6m high. Find ... shadow increases when he is 1m away from the lamp post.

1 micron is equal to ___________ meter(s). A. 10-6m B. 10-3 m C. 106 m D. 109 m

Description : 1 micron is equal to ___________ meter(s). A. 10-6m B. 10-3 m C. 106 m D. 109 m

Last Answer : A. 10-6m

A person runs opposite to that of chandigarh train at a speed of 10km/hr. If the relative speed between train and the boy running in opposite direction is 25km/hr. What is the length of the train, if it takes 10 seconds to cross a boy, when is at rest? A) 36.6 m B) 40.6 m C) 43.6m D) 41.6m

Description :  A person runs opposite to that of chandigarh train at a speed of 10km/hr. If the relative speed between train and the boy running in opposite direction is 25km/hr. What is the length of the train, if it takes 10 seconds to cross a boy, when is at rest? A) 36.6 m B) 40.6 m C) 43.6m D) 41.6m

Last Answer : ANSWER : D  Explanation: Speed of person = 10km/hr  As the train and the running person are moving in opposite direction,therir speed values are added to find the relative speed.  Relative speed = speed of train + speed of ... s  Distance = speed * time = 25 / 6 * 10 = 250/6 m/s = 41.6 m