Study the following statements. (i) The displacement method is more useful when degree of kinematic indeterminacy is greater than the degree of static indeterminacy. (ii) The displacement method is more useful when degree of kinematic indeterminacy is less than the degree of static indeterminacy. (iii) The force method is more useful when degree of static indeterminacy is greater than the degree of kinematic indeterminacy. (iv) The force method is more useful when degree of static indeterminacy is less than the degree of kinematic indeterminacy. The correct answer is (A) (i) and (iii) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Study the following statements.
 (i) The displacement method is more useful when degree of kinematic indeterminacy is greater
than the degree of static indeterminacy.
 (ii) The displacement method is more useful when degree of kinematic indeterminacy is less than
the degree of static indeterminacy.
 (iii) The force method is more useful when degree of static indeterminacy is greater than the
degree of kinematic indeterminacy.
 (iv) The force method is more useful when degree of static indeterminacy is less than the degree
of kinematic indeterminacy.
 The correct answer is
(A) (i) and (iii)
(B) (ii) and (iii)
(C) (i) and (iv)
(D) (ii) and (iv)
by

1 Answer

Answer :

(D) (ii) and (iv)
by

Related questions

The degree of kinematic indeterminacy of a pin-jointed space frame is (A) 2j - r(B) 3j - r(C) j - 2r(D) j - 3rWhere j is number of joints and r is reaction components

Description : The degree of kinematic indeterminacy of a pin-jointed space frame is (A) 2j - r (B) 3j - r (C) j - 2r (D) j - 3r Where j is number of joints and r is reaction components

Last Answer : (B) 3j - r

Degree of kinematic indeterminacy of a pin-jointed plane frame is given by (A) 2j - r (B) j - 2r (C) 3j - r (D) 2j + r

Description : Degree of kinematic indeterminacy of a pin-jointed plane frame is given by (A) 2j - r (B) j - 2r (C) 3j - r (D) 2j + r

Last Answer : (A) 2j - r

The degree of static indeterminacy up to which column analogy method can be used is (A) 2 (B) 3 (C) 4 (D) Unrestricted

Description : The degree of static indeterminacy up to which column analogy method can be used is (A) 2 (B) 3 (C) 4 (D) Unrestricted

Last Answer : (B) 3

Degree of static indeterminacy of a rigid-jointed plane frame having 15 members, 3 reaction components and 14 joints is (A) 2 (B) 3 (C) 6 (D) 8

Description : Degree of static indeterminacy of a rigid-jointed plane frame having 15 members, 3 reaction components and 14 joints is (A) 2 (B) 3 (C) 6 (D) 8

Last Answer : (C) 6

If there are m unknown member forces, r unknown reaction components and j number of joints, then the degree of static indeterminacy of a pin-jointed plane frame is given by (A) m + r + 2j (B) m - r + 2j (C) m + r - 2j (D) m + r - 3j

Description : If there are m unknown member forces, r unknown reaction components and j number of joints, then the degree of static indeterminacy of a pin-jointed plane frame is given by (A) m + r + 2j (B) m - r + 2j (C) m + r - 2j (D) m + r - 3j

Last Answer : (C) m + r - 2j

The degree of static indeterminacy of a pin-jointed space frame is given by m r j number of joints) (A) m + r - 2j (B) m + r - 3j (C) 3m + r - 3j (D) m + r + 3j

Description : The degree of static indeterminacy of a pin-jointed space frame is given by m r j number of joints) (A) m + r - 2j (B) m + r - 3j (C) 3m + r - 3j (D) m + r + 3j

Last Answer : (B) m + r - 3j

The degree of static indeterminacy of a rigid-jointed space frame is (A) m + r - 2j (B) m + r - 3j (C) 3m + r - 3j (D) 6m + r - 6j Where m, r and j have their usual meanings

Description : The degree of static indeterminacy of a rigid-jointed space frame is (A) m + r - 2j (B) m + r - 3j (C) 3m + r - 3j (D) 6m + r - 6j Where m, r and j have their usual meanings

Last Answer : (D) 6m + r - 6j

Study the following statements. (i) Levees are constructed parallel to river flow (ii) Spurs are constructed parallel to river flow (iii) Levees are constructed transverse to river flow (iv) Spurs are constructed transverse to river flow The correct answer is (A) (i) and (ii) (B) (i) and (iv) (C) (ii) and (iii) (D) (iii) and (iv)

Description : Study the following statements. (i) Levees are constructed parallel to river flow (ii) Spurs are constructed parallel to river flow (iii) Levees are constructed transverse to river flow (iv) Spurs are constructed transverse to ... (B) (i) and (iv) (C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : Answer: Option B

Dead weight tonnage of a ship (i) Varies with latitude and season (ii) Is more than displacement tonnage (iii) Is the difference between displacement load and displacement light Of these statements (A) i) and ii) are correct (B) ii) and iii) are correct (C) i) and iii) are correct (D) Only iii) is correct

Description : Dead weight tonnage of a ship (i) Varies with latitude and season (ii) Is more than displacement tonnage (iii) Is the difference between displacement load and displacement light Of these statements (A) i) ... ii) and iii) are correct (C) i) and iii) are correct (D) Only iii) is correct

Last Answer : (C) i) and iii) are correct

Define following terms (i) Kinematic link (ii) Kinematic pair (iii) Kinematic chain (iv) Mechanism (v) Machine (vi) Inversion

Description : Define following terms (i) Kinematic link (ii) Kinematic pair (iii) Kinematic chain (iv) Mechanism (v) Machine (vi) Inversion

Last Answer : (i) Kinematic link: Each part of a machine, which moves relative to some other part, is known as a kinematic link.  (ii) Kinematic pair: The two links or elements of a machine, ... obtaining different mechanisms by fixing different links in a kinematic chain is known as inversion of the mechanism.

In a ring beam subjected to uniformly distributed load (i) Shear force at mid span is zero (ii) Shear force at mid span is maximum (iii) Torsion at mid span is zero (iv) Torsion at mid span is maximum The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : In a ring beam subjected to uniformly distributed load (i) Shear force at mid span is zero (ii) Shear force at mid span is maximum (iii) Torsion at mid span is zero (iv) Torsion at mid span is maximum The correct answer ... and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Option A

method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Description : method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Last Answer : Answer: Option B

Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Description : Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Last Answer : Answer: Option B (B) (ii) and (iii)

The number of plastic hinges required in a structure of indeterminate status for a ‘mechanism’ to develop is (a) i (b) i + 1 ( c) i + 2 (d) i – 1 Where ‘i' is the degree of indeterminacy

Description : The number of plastic hinges required in a structure of indeterminate status for a ‘mechanism’ to develop is (a) i (b) i + 1 ( c) i + 2 (d) i – 1 Where ‘i' is the degree of indeterminacy

Last Answer : (b) i + 1

Defects discovered by static analysis tools include: i. Variables that are never used. ii. Security vulnerabilities. iii. Programming Standard Violations iv. Uncalled functions and procedures a) i , ii,iii,iv is correct b) iii ,is correct I,ii,iv are incorrect. c) i ,ii, iii and iv are incorrect d) iv, ii is correct

Description : Defects discovered by static analysis tools include: i. Variables that are never used. ii. Security vulnerabilities. iii. Programming Standard Violations iv. Uncalled functions and procedures a) i , ii,iii,iv is correct b ... ,iv are incorrect. c) i ,ii, iii and iv are incorrect d) iv, ii is correct

Last Answer : a) i , ii,iii,iv is correct

Quantitative data refers to (i) Graphs and tables (ii) Any data you present in your report (iii) Statistical analysis (iv) Numerical data that could be useful to answer your research question(s) and to meet your Objectives

Description : Quantitative data refers to (i) Graphs and tables (ii) Any data you present in your report (iii) Statistical analysis (iv) Numerical data that could be useful to answer your research question(s) and to meet your Objectives

Last Answer : (iv) Numerical data that could be useful to answer your research question(s) and to meet your Objectives

Consider the following statements and select the correct answer from the code given below: i. Rajasthan receives the highest solar radiation in the country. ii. India has the fifth largest installed wind power in the world. iii. The maximum amount of wind power is contributed by Tamil Nadu. iv. The primary source of uranium in India is Jaduguda. Codes: (A) i and ii (B) i, ii and iii (C) ii and iii (D) i and iv

Description : Consider the following statements and select the correct answer from the code given below: i. Rajasthan receives the highest solar radiation in the country. ii. India has the fifth largest installed wind power in the world. iii. The ... (A) i and ii (B) i, ii and iii (C) ii and iii (D) i and iv

Last Answer : Answer: D

Which of the following statements are mutually contradictory ? (i) All flowers are not fragrant. (ii) Most flowers are not fragrant. (iii) None of the flowers is fragrant. (iv) Most flowers are fragrant. Choose the correct answer from the code given below : Code : (A) (i) and (ii) (B) (i) and (iii) (C) (ii) and (iii) (D) (iii) and (iv)

Description : Which of the following statements are mutually contradictory ? (i) All flowers are not fragrant. (ii) Most flowers are not fragrant. (iii) None of the flowers is fragrant. (iv) Most flowers are fragrant. Choose the correct answer ... ii) (B) (i) and (iii) (C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : (D) (iii) and (iv) 

The pair(s) which will show displacement reaction is/are (i) NaCl solution and copper metal (ii) AgNO3 solution and copper metal (iii) Al2(SO4)3 solution and magnesium metal (iv) ZnSO4 solution and iron metal (a) (ii) only (b) (ii) and (iii) (c) (iii) and (iv) (d) (i) and (ii)

Description : The pair(s) which will show displacement reaction is/are (i) NaCl solution and copper metal (ii) AgNO3 solution and copper metal (iii) Al2(SO4)3 solution and magnesium metal (iv) ZnSO4 solution and iron metal (a) (ii) only (b) (ii) and (iii) (c) (iii) and (iv) (d) (i) and (ii)

Last Answer : (c) (iii) and (iv)

The maximum harbour depth below lowest low water is generally equal to (i) Loaded draft +1.2 m when bottom is rock (ii) Loaded draft +1.8 m when bottom is soft (iii) Loaded draft +1.2 m when bottom is soft (iv) Loaded draft +1.8 m when bottom is rock Of these statements (A) (i) and (ii) are correct (B) (i) and (iii) are correct (C) (ii) and (iv) are correct (D) (iii) and (iv) are correct

Description : The maximum harbour depth below lowest low water is generally equal to (i) Loaded draft +1.2 m when bottom is rock (ii) Loaded draft +1.8 m when bottom is soft (iii) Loaded draft +1.2 m when bottom is ... ) and (iii) are correct (C) (ii) and (iv) are correct (D) (iii) and (iv) are correct

Last Answer : (D) (iii) and (iv) are correct

The part of a derrick crane include (i) Mast (ii) Boom (iii) Bull wheel (iv) Jack Of these statements (A) (i), (ii) and (iv) are correct (B) (ii), (iii) and (iv) are correct (C) (i), (iii) and (iv) are correct (D) (i), (ii) and (iii) are correct

Description : The part of a derrick crane include (i) Mast (ii) Boom (iii) Bull wheel (iv) Jack Of these statements (A) (i), (ii) and (iv) are correct (B) (ii), (iii) and (iv) are correct (C) (i), (iii) and (iv) are correct (D) (i), (ii) and (iii) are correct

Last Answer : (D) (i), (ii) and (iii) are correct

Examine the following statements: (i) Factor of safety for steel should be based on its yield stress, (ii) Factor of safety for steel should be based on its ultimate stress, (iii) Factor of safety for concrete should be based on its yield stress, (iv) Factor of safety for concrete should be based on its ultimate stress. The correct statements are (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv

Description : Examine the following statements: (i) Factor of safety for steel should be based on its yield stress, (ii) Factor of safety for steel should be based on its ultimate stress, (iii) Factor of safety for concrete should be based on ... (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv

Last Answer : Answer: Option B

Higher pitch of the roof (i) Results in stronger roof (ii) Results in weaker roof (iii) Requires more covering material (iv) Requires less covering material The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : Higher pitch of the roof (i) Results in stronger roof (ii) Results in weaker roof (iii) Requires more covering material (iv) Requires less covering material The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Option A

A and B are two towers of equal height diametrically opposite on either side of the nadir point, at 3 km and 5 km distances. Which one of the following statements is correct? (A) Height displacement of A will be less than that of B (B) Height displacement of B will be less than that of A (C) Height displacement of A and B is equal (D) Height displacement of A and B will be towards each other

Description : A and B are two towers of equal height diametrically opposite on either side of the nadir point, at 3 km and 5 km distances. Which one of the following statements is correct? (A) Height displacement ... of A and B is equal (D) Height displacement of A and B will be towards each other

Last Answer : Answer: Option A

Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by the force of adhesion between liquid molecules c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Description : Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by ... it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Last Answer : c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions

The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Description : The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Last Answer : (C) (ii) and (iv)

Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv) Any statically indeterminate structure The correct answer is (A) (i), (ii) and (iii) (B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Description : Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv ... B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Last Answer : (A) (i), (ii) and (iii)

For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal (i) Of a stiffness matrix must be positive (ii) Of a stiffness matrix must be negative (iii) Of a flexibility matrix must be positive (iv) Of a flexibility matrix must be negative The correct answer is (A) (i) and (iii) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Description : For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal (i) Of a stiffness matrix must be positive (ii) Of a stiffness matrix must be negative (iii) Of ... ) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Last Answer : (A) (i) and (iii)

Presence of tail water in a gravity dam (i) Increases the principal stress (ii) Decreases the principal stress (iii) Increases the shear stress (iv) Decreases the shear stress The correct answer isA) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : Presence of tail water in a gravity dam (i) Increases the principal stress (ii) Decreases the principal stress (iii) Increases the shear stress (iv) Decreases the shear stress The correct answer is A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Answer: Option D

Instantaneous unit hydrograph is a hydrograph of (i) Unit duration (ii) Unit rainfall excess (iii) Infinitely small duration (iv) Infinitely small rainfall excess The correct answer is (A) (i) and (ii) (B) (i) and (iv) C) (ii) and (iii) (D) (iii) and (iv)

Description : Instantaneous unit hydrograph is a hydrograph of (i) Unit duration (ii) Unit rainfall excess (iii) Infinitely small duration (iv) Infinitely small rainfall excess The correct answer is (A) (i) and (ii) (B) (i) and (iv) C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : Answer: Option C

The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : (B) (i) and (iv)

The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) Bottom face perpendicular to the wall The correct answer is (A) Only (ii) is correct (B) (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Description : The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) ... (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Last Answer : Answer: Option D

Sinking of an intermediate support of a continuous beam (i) Reduces the negative moment at support (ii) Increases the negative moment at support (iii) Reduces the positive moment at center of span (iv) Increases the positive moment at center of span The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : Sinking of an intermediate support of a continuous beam (i) Reduces the negative moment at support (ii) Increases the negative moment at support (iii) Reduces the positive moment at center of span (iv) Increases the positive moment ... (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Answer: Option B

In counterfort type retaining walls (i) The vertical slab is designed as a continuous slab (ii) The heel slab is designed as a continuous slab (iii) The vertical slab is designed as a cantilever (iv) The heel slab is designed as a cantilever The correct answer is (A) (i) and (ii) (B) (i)and(iv) (C) (ii) and (iii) (D) (iii) and (iv)

Description : In counterfort type retaining walls (i) The vertical slab is designed as a continuous slab (ii) The heel slab is designed as a continuous slab (iii) The vertical slab is designed as a cantilever (iv) The heel slab is designed ... (ii) (B) (i)and(iv) (C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : Answer: Option A

In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided on (i) Bottom face near counterfort (ii) Top face near counterfort (iii) Bottom face near centre of span (iv) Top face near centre of span The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (iv) (D) Both (ii) and (iii)

Description : In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided on (i) Bottom face near counterfort (ii) Top face near counterfort (iii) Bottom face near centre of span (iv) Top ... ) (B) Only (ii) (C) Both (i) and (iv) (D) Both (ii) and (iii)

Last Answer : Answer: Option C

In a counterfort retaining wall, the main reinforcement is provided on the (i) Bottom face in front counterfort (ii) Inclined face in front counterfort (iii) Bottom face in back counterfort (iv) Inclined face in back counterfort The correct answer is (A) (i) and (ii), (B) (ii) and (iii) (C) (i) and (iv) (D) (iii) and (iv)

Description : In a counterfort retaining wall, the main reinforcement is provided on the (i) Bottom face in front counterfort (ii) Inclined face in front counterfort (iii) Bottom face in back counterfort (iv) Inclined face in back counterfort ... (B) (ii) and (iii) (C) (i) and (iv) (D) (iii) and (iv)

Last Answer : Answer: Option C

Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)

Description : Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)

Last Answer : Answer: Option D

Study the given figure below and answer the question that follow important-questions-for-class-12-biology-cbse-fertilisation-pregnancy-and-embryonic-development-t-33-3 (i)Name the stage of human embryo the figure represents. (ii)Identify Ain the figure and mention its function. (iii)Mention the fate of the inner cell mass after implantation in the uterus. (iv)Where are the stem cells located in this embryo? -Biology

Description : Study the given figure below and answer the question that follow important-questions-for-class-12-biology-cbse-fertilisation-pregnancy-and-embryonic-development-t-33-3 (i)Name the stage of human embryo the ... implantation in the uterus. (iv)Where are the stem cells located in this embryo? -Biology

Last Answer : (i)The stage is blastocyst. (ii) A—Trophoblast. It helps in attachment to endometrium during implantation and provides nourishment to developing embryo. (iii) Inner cell mass acts as precursor to embryo ... into ectoderm and endoderm. (iv) Stem cells are located in inner cell mass of embryo.

Consider the following statements: In the critical path method of construction planning, Free Float can be. 1. Greater than Total Float. 2. Greater than Independent Float 3. Equal to Total Float. 4. Less than Independent Float. Of these statements (A) 1 and 4 are correct (B) 2 and 3 are correct (C) 1 and 4 are correct (D) 1 and 2 are correct

Description : Consider the following statements: In the critical path method of construction planning, Free Float can be. 1. Greater than Total Float. 2. Greater than Independent Float 3. Equal to Total Float. 4. Less than ... (B) 2 and 3 are correct (C) 1 and 4 are correct (D) 1 and 2 are correct

Last Answer : (B) 2 and 3 are correct

By increasing the rise of lock-gates, (i) The length of the lock gate will increase (ii) Transverse stress due to water pressure on the gate will increase (iii) Compressive force on the gate will increase Of these statements (A) (i) and (ii) are correct (B) (i) and (iii) are correct (C) Only (ii) is correct (D) Only (iii) is correc

Description : By increasing the rise of lock-gates, (i) The length of the lock gate will increase (ii) Transverse stress due to water pressure on the gate will increase (iii) Compressive force on the gate will increase Of ... ) (i) and (iii) are correct (C) Only (ii) is correct (D) Only (iii) is correc

Last Answer : (A) (i) and (ii) are correct

Match the following types of variables with the corresponding programming languages: (a) Static variables (i) Local variables in Pascal (b) Stack dynamic (ii) All variables in APL (c) Explicit heap dynamic (iii) Fortran 77 (d) Implicit heap dynamic (iv) All objects in JAVA Codes: (a) (b) (c) (d) (A) (i) (iii) (iv) (ii) (B) (iv) (i) (iii) (ii) (C) (iii) (i) (iv) (ii) (D) (ii) (i) (iii) (iv)

Description : Match the following types of variables with the corresponding programming languages: (a) Static variables (i) Local variables in Pascal (b) Stack dynamic (ii) All variables in APL (c) Explicit heap dynamic (iii) Fortran 77 (d) Implicit ... (ii) (C) (iii) (i) (iv) (ii) (D) (ii) (i) (iii) (iv)

Last Answer : (C) (iii) (i) (iv) (ii) 

Define with respect to FET:- (i) Static drain resistance (ii) Dynamic resistance (iii) Trans conductance (iv) Pinch-off voltage

Description : Define with respect to FET:- (i) Static drain resistance (ii) Dynamic resistance (iii) Trans conductance (iv) Pinch-off voltage

Last Answer : (i) Static drain resistance- It is the ratio of drain source voltage (ΔVDS) to the drain current (ID) at constant gate-source voltage. It can be expressed as, Rd = (VDS)/(ID) at ... of charge carrier and the value of drain current reaches its constant saturation value is called pinch off voltage.

Define following term: (i) Precision (ii) Drift (iii) Static error (iv) Dead zone

Description : Define following term: (i) Precision (ii) Drift (iii) Static error (iv) Dead zone

Last Answer : (i) Precision: It is the measure of consistency or repeatability of measurements.   OR The closeness with which the individual measurements are departed or distributed about the average of number ... variable to which instrument does not respond. It is mainly due to friction in the instrument.

Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ A Static force B Dynamic force C Torsion D Compression

Description : Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ A Static force B Dynamic force C Torsion D Compression

Last Answer : A Static force