For the construction of highway (or railway) (A) Longitudinal sections are required (B) Cross sections are required (C) Both longitudinal and cross sections are required (D) None of these

For the construction of highway (or railway)
(A) Longitudinal sections are required
(B) Cross sections are required
(C) Both longitudinal and cross sections are required
(D) None of these
by

1 Answer

Answer :

(C) Both longitudinal and cross sections are required
by

Related questions

The cross-sections for a highway is taken at (A) Right angle to the centre line (B) 30 metres apart (C) Intermediate points having abrupt change in gradient (D) All the above

Description : The cross-sections for a highway is taken at (A) Right angle to the centre line (B) 30 metres apart (C) Intermediate points having abrupt change in gradient (D) All the above

Last Answer : (D) All the above

First operation during the detailed survey of a hill road, is (A) Hydrological and soil surveys (B) Adjustment of alignment along with curves (C) Derivation of longitudinal and cross-sections (D) Fixation of Bench Marks

Description : First operation during the detailed survey of a hill road, is (A) Hydrological and soil surveys (B) Adjustment of alignment along with curves (C) Derivation of longitudinal and cross-sections (D) Fixation of Bench Marks

Last Answer : Answer: Option D

If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by (A) Mid-section formula (B) Trapezoidal formula (C) Prismoidal formula (D) All the above

Description : If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by (A) Mid-section formula (B) Trapezoidal formula (C) Prismoidal formula (D) All the above

Last Answer : (D) All the above

In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Description : In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Last Answer : Answer: Option C

In highway construction, rolling starts from (A) Sides and proceed to center (B) Center and proceed to sides (C) One side and proceed to other side (D) Any of the above

Description : In highway construction, rolling starts from (A) Sides and proceed to center (B) Center and proceed to sides (C) One side and proceed to other side (D) Any of the above

Last Answer : Answer: Option A

The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Last Answer : (d) Avoid buckling of longitudinal bars

The purpose of lateral ties in short reinforced concrete columns is to [ A ] Facilitate construction [ B ] Facilitate compaction of concrete [ C ] Increase the load carrying capacity of the columns [ D ] Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short reinforced concrete columns is to [ A ] Facilitate construction [ B ] Facilitate compaction of concrete [ C ] Increase the load carrying capacity of the columns [ D ] Avoid buckling of longitudinal bars

Last Answer : [ D ] Avoid buckling of longitudinal bars

Which of the following survey are required to be done before the construction of new railway line. (a) Traffic survey (b) Reconnaessarice survey (c) Preliminary survey (d) Final location survey (e) All the above

Description : Which of the following survey are required to be done before the construction of new railway line. (a) Traffic survey (b) Reconnaessarice survey (c) Preliminary survey (d) Final location survey (e) All the above

Last Answer : e) All the above

The CRS sanction is required in the ROB project for construction of a) Approach spans b) Laying road c) Railway spans d) none

Description : The CRS sanction is required in the ROB project for construction of a) Approach spans b) Laying road c) Railway spans d) none

Last Answer : c) Railway span

If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Description : If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Last Answer : (B) Bd + Sd2

The intensity of direct longitudinal stress in the cross-section at any point distant r from the neutral axis, is proportional to (A) r (B) 1/r (C) r2 (D) 1/r²

Description : The intensity of direct longitudinal stress in the cross-section at any point distant r from the neutral axis, is proportional to (A) r (B) 1/r (C) r2 (D) 1/r²

Last Answer : (A) r

If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Description : If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Last Answer : Answer: Option D

Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of column should not exceed 300 mm (C) Reinforcing bars in a column should not be less than 12 mm in diameter (D) The number of longitudinal bars provided in a circular column should not be less than four

Description : Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of ... (D) The number of longitudinal bars provided in a circular column should not be less than four

Last Answer : Answer: Option D

Ab and Ac are the cross sections of bronze and copper bars of equal lengt b c are their respective stresses due to load P. If Pb and Pc are the loads shared by them, (where Eb and Ec are their modulii). (A) b c = Eb /Ec (B) P = Pb + Pc (C) P = Ab b + Ac b (D) All the above

Description : Ab and Ac  are the cross sections of bronze and copper bars of equal lengt b c  are their  respective stresses due to load P. If Pb and Pc  are the loads shared by them, (where Eb and Ec  are  their modulii) ... /Ec (B) P = Pb + Pc (C) P = Ab b + Ac b (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) For channels, the shear centre does not coincide its centroid (B) The point of intersection of the bending axis with the cross section of the beam, is called shear centre (C) For I sections, the shear centre coincides with the centroid of the cross section of the beam (D) All the above

Description : Pick up the correct statement from the following:  (A) For channels, the shear centre does not coincide its centroid  (B) The point of intersection of the bending axis with the cross section ... shear centre coincides with the centroid of the cross section of the beam  (D) All the above

Last Answer : (D) All the above

If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2(D) D/6m(h1 - h2)3

Description : If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2 (D) D/6m(h1 - h2)3

Last Answer : (C) D/6m(h1 - h2)2

In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Description : In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Last Answer : (D) (i), (ii) and (iii)

Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Description : Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Last Answer : (D) Tachometric method

The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Description : The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Last Answer : (A) 1.118

The equation of continuity holds good when the flow (A) Is steady (B) Is one dimensional (C) Velocity is uniform at all the cross sections (D) All of the above

Description : The equation of continuity holds good when the flow (A) Is steady (B) Is one dimensional (C) Velocity is uniform at all the cross sections (D) All of the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The cross fall of the shoulder should be at least 0.5% steeper than camber (B) On super-elevated sections, the shoulders should be provided a cross fall equal to camber (C) Earthen roads in general are provided steepest cross-fall (D) All the above

Description : Pick up the correct statement from the following: (A) The cross fall of the shoulder should be at least 0.5% steeper than camber (B) On super-elevated sections, the shoulders should be provided a ... equal to camber (C) Earthen roads in general are provided steepest cross-fall (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item (B) The centre line is worked out separately for different sections of walls of a building (C) The centre line length is reduced by half the layer of main wall joining the partition wall (D) All the above

Description : Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the ... length is reduced by half the layer of main wall joining the partition wall (D) All the above

Last Answer : (D) All the above

The application of elastic theory to the beams is based on the assumption that (a) At any cross-section, plane sections before bending remain plane after bending (b) All tensile stresses are taken up by reinforcement alone and none by the concrete. (c) Steel reinforcement is free from initial stresses when it is embedded in concrete. (d) All of the above

Description : The application of elastic theory to the beams is based on the assumption that (a) At any cross-section, plane sections before bending remain plane after bending (b) All tensile stresses are taken ... reinforcement is free from initial stresses when it is embedded in concrete. (d) All of the above

Last Answer : (d) All of the above

Railway projects are treated as (A) Light construction (B) Heavy construction (C) Industrial construction (D) None of these

Description : Railway projects are treated as (A) Light construction (B) Heavy construction (C) Industrial construction (D) None of these

Last Answer : (B) Heavy construction

Which of the following stone is best suited for construction of piers and abutments of a railway bridge? (A) Granite (B) Sand stone (C) Lime stone (D) Quartze

Description : Which of the following stone is best suited for construction of piers and abutments of a railway bridge? (A) Granite (B) Sand stone (C) Lime stone (D) Quartze

Last Answer : Answer: Option A

Mark the correct option a) Changing station is a Railway station is where the beats of two transit sections join and where the mails brought by one of them are handed over to the other b) A connecting station is an RMS section working in a train in immediate connection with another train in which another RMS section works c) Regn of newspaper, renewal or canceling any registration will be issued by Head of the department d) All the above

Description : Mark the correct option a) Changing station is a Railway station is where the beats of two transit sections join and where the mails brought by one of them are handed over to the other b) ... , renewal or canceling any registration will be issued by Head of the department d) All the above

Last Answer : d) All the above

Why gaps are left between two sections of a railway track?

Description : Why gaps are left between two sections of a railway track?

Last Answer : The gaps allow the expansion and contraction of rails during summer and winter season.

If you were driving down the freeway at nighttime during construction work and spotted several Highway Patrol officers near the construction area with their lights on would you a: speed up b: slow down c: continue at the same speed (assuming that this is a multi-lane freeway and you are able to go at or above typical freeway speeds)

Description : If you were driving down the freeway at nighttime during construction work and spotted several Highway Patrol officers near the construction area with their lights on would you a: speed up b: slow down c: ... this is a multi-lane freeway and you are able to go at or above typical freeway speeds)

Last Answer : I always slow down for construction sites. Those “My Daddy Works Here!” signs got me.

When making a location location decision decision at the country country level, which of these would be considered? a. corporate corporate desires desires b. land/construction costs land/construction costs c. air, rail, highway, highway, waterway waterway systems systems d. zoning restrictions restrictions e. location of markets

Description : When making a location location decision decision at the country country level, which of these would be considered? a. corporate corporate desires desires b. land/construction costs land/ ... , highway, waterway waterway systems systems d. zoning restrictions restrictions e. location of markets

Last Answer : e. location of markets

State the requirement of good quality material which plays the major role in highway construction

Description : State the requirement of good quality material which plays the major role in highway construction

Last Answer : The materials which plays major role in highway construction are: a) Soil b) Bitumen c) Cement d) Stone e) Concrete f) Sand Requirements: a) Soil: i) It should be clean and coarse. ii ... . vii) It should be strong and durable. It should be clean and free from coatings of clay and silt.

Why would a herd of deer cross a major highway during rush hour?

Description : Why would a herd of deer cross a major highway during rush hour?

Last Answer : Well, herds of deer tend not to wear wristwatches, os they may not have known it was rush hour. Herds are herds - and deer are not particularly smart animals. They have a leader, and the others just follow. ... a large object is a tree or rock - neither of them move. Cars don't fit their world view.

What's the fastest way to cross manhattan from about 60th and madison to the west side highway -- in general, and also during evening rush hour.

Description : What's the fastest way to cross manhattan from about 60th and madison to the west side highway -- in general, and also during evening rush hour.

Last Answer : Well since one of your topic tags is cab' I'm assuming you don't have a car you're worring about, so I would say the best (and cheapest!) would be to take the subway (A, C, or E, ... exactly you start) to 23rd street, then catch a cap from there. You'll miss a lot of the midtown traffic.

1. The first Indian to cross seven important seas by swimming? 2. By whom was Artificial gene synthesis first done in laboratory? 3. In which schedule is the list of items which may be entrusted to the Panchayats given? 4. Which national Highway route is the longest? 5. Who had started ‘Mitra Mela’ Association?

Description : 1. The first Indian to cross seven important seas by swimming? 2. By whom was Artificial gene synthesis first done in laboratory? 3. In which schedule is the list of items which may be ... 19. Where is Dead sea situated? 20. Who opposed Mahatma Gandhi's association with the Khilafat movement?

Last Answer : Answer : 1. Bula Chaudhary 2. Khurana 3. Eleventh Schedule 4. Kolkata-Hajira 5. Vinayak Damodar Savarkar 6. Atomic number 7. July, 2014 8. Oil and Petroleum 9. Bangalore 10. Aurobindo Ghosh 11. ... 16. Bachhendri Pal 17. Madhya Pradesh 18. A thousand 19. A Rift Valley 20. Mohammed Alix Jinnah

In R.C. sewer pipes, the percentage longitudinal reinforcement to the cross-sectional area of concrete is kept A. 10.0 B. 5.0 C. 2.0 D. 0.25

Description : In R.C. sewer pipes, the percentage longitudinal reinforcement to the cross-sectional area of concrete is kept A. 10.0 B. 5.0 C. 2.0 D. 0.25

Last Answer : ANS: D

All of the followings are related to Epidemiology except D A. Case-control studies B. Cohort Studies C. Longitudinal and cross sectional studies D. None

Description : All of the followings are related to Epidemiology except D A. Case-control studies B. Cohort Studies C. Longitudinal and cross sectional studies D. None

Last Answer : None

On the basis of time, research can be classified as, (i) Qualitative versus Quantitative (ii) Pure versus applied research (iii) Cross-sectional versus longitudinal research (iv) None of the above

Description : On the basis of time, research can be classified as, (i) Qualitative versus Quantitative (ii) Pure versus applied research (iii) Cross-sectional versus longitudinal research (iv) None of the above

Last Answer : (iii) Cross-sectional versus longitudinal research

Research approaches are Options: A) Longitudinal and cross-sectional B) Oblique and horizontal C) Long and short section D) None of the above

Description : Research approaches are Options: A) Longitudinal and cross-sectional B) Oblique and horizontal C) Long and short section D) None of the above

Last Answer : A) Longitudinal and cross-sectional

On the basis of contributions made, all the researches can be classified as Options: A) Fundamental-Applied-Action Research B) Experimental-Historical-Philosophical C) Longitudinal and Cross-sectional D) None of the above

Description : On the basis of contributions made, all the researches can be classified as Options: A) Fundamental-Applied-Action Research B) Experimental-Historical-Philosophical C) Longitudinal and Cross-sectional D) None of the above

Last Answer : A) Fundamental-Applied-Action Research 

Two wire of the same meta have same length, but their cross-sections are in the rati `3:1` . They are joined in series. The resistance of thicker wire

Description : Two wire of the same meta have same length, but their cross-sections are in the rati `3:1` . They are joined in series. The resistance of thicker wire

Last Answer : Two wire of the same meta have same length, but their cross-sections are in the rati `3:1` . They are ... )Omega` C. `(5)/(2)Omega` D. `100Omega`

Hydraulic mean radius is A. Mean radius of sewer B. Difference in heads between two points in circular pipes C. Mean of radii in a pipe line of varying cross -sections D. Cross-sectional area/wetted perimeter

Description : Hydraulic mean radius is A. Mean radius of sewer B. Difference in heads between two points in circular pipes C. Mean of radii in a pipe line of varying cross -sections D. Cross-sectional area/wetted perimeter

Last Answer : ANS: D

A streamline is (A) The line connecting the mid-points of flow cross-sections (B) Defined for uniform flow only (C) Drawn normal to the velocity vector at every point (D) Always the path of a particle

Description : A streamline is (A) The line connecting the mid-points of flow cross-sections (B) Defined for uniform flow only (C) Drawn normal to the velocity vector at every point (D) Always the path of a particle

Last Answer : (C) Drawn normal to the velocity vector at every point

A simplified version of the Wheatstone bridge wherein, two of the ratio arms are replaced by a 100cm long Manganin of uniform cross-sections and provided with a slider

Description : A simplified version of the Wheatstone bridge wherein, two of the ratio arms are replaced by a 100cm long Manganin of uniform cross-sections and provided with a slider

Last Answer : slide-wire bridge

Valleys formed by glaciers always have which of the following characteristics? w) U-shaped cross sections x) straight courses y) uniform slopes z) bedrock floors

Description : Valleys formed by glaciers always have which of the following characteristics? w) U-shaped cross sections x) straight courses y) uniform slopes z) bedrock floors

Last Answer : ANSWER: W -- U-SHAPED CROSS SECTIONS

Comparing the total copper cross sections in terms of current-carrying capacity for a single-phase and ...

Description : Comparing the total copper cross sections in terms of current-carrying capacity for a single-phase and a three-phase 120 V system with effective load resistance of 15Ω, will yield: A. single-phase 32 A; three-phase 16 ... C. single-phase 8 A; three-phase 4 A D. single-phase 16 A; three-phase 0 A

Last Answer : Comparing the total copper cross sections in terms of current-carrying capacity for a single-phase and a three-phase 120 V system with effective load resistance of 15Ω, will yield: single-phase 16 A; three-phase 8 A 

Highway Research Board (HRB) classification of soils is based on (A) Particle size composition (B) Plasticity characteristics (C) Both particle size composition and plasticity characteristics (D) None of the above

Description : Highway Research Board (HRB) classification of soils is based on (A) Particle size composition (B) Plasticity characteristics (C) Both particle size composition and plasticity characteristics (D) None of the above

Last Answer : (C) Both particle size composition and plasticity characteristics

Name two areas in India which are unfavourable for the construction of railway lines? -SST 10th

Description : Name two areas in India which are unfavourable for the construction of railway lines? -SST 10th

Last Answer : (i) (a) The Himalayan mountainous regions (b) The sandy plains of Rajasthan (ii) (a) The Himalayan mountainous regions are unfavourable for the construction of railway lines due to ... of western Rajasthan, swamps of Gujarat and forested tracks of Madhya Pradesh,Chhattisgarh, Orissa and Jharkhand.

Name the British officer who promoted railway construction in India in the 19th century. -SST 10th

Description : Name the British officer who promoted railway construction in India in the 19th century. -SST 10th

Last Answer : Lord Dalhousie promoted railway construction in India in the 19th century.

Coal ash (or cinder) is used in initial stages of a new construction of railway for A. Wooden sleeper B. Steel sleeper C. Cast iron sleeper D. None of These

Description : Coal ash (or cinder) is used in initial stages of a new construction of railway for A. Wooden sleeper B. Steel sleeper C. Cast iron sleeper D. None of These

Last Answer : A [Wooden sleeper]

Survey of the major projects is done by (a) Chief Engineer (b) Chief Administrative Officer (CAO) construction* (c) Divisional Railway Manager (d) Railway Board

Description : Survey of the major projects is done by (a) Chief Engineer (b) Chief Administrative Officer (CAO) construction* (c) Divisional Railway Manager (d) Railway Board

Last Answer : (b) Chief Administrative Officer (CAO) construction*