Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item (B) The centre line is worked out separately for different sections of walls of a building (C) The centre line length is reduced by half the layer of main wall joining the partition wall (D) All the above

Pick up the correct statement regarding the centre line method of estimating a building
(A) Product of the centre line of the walls and area of cross-section of any item, gives total
quantity of the item
(B) The centre line is worked out separately for different sections of walls of a building
(C) The centre line length is reduced by half the layer of main wall joining the partition wall
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

Referring of given figure, pick up the correct statement from the following: (A) The total length of centre line of four walls is 20 m (B) Length of long wall out-to-out is 6.80 m (C) Length of short walls in-to-in is 3.20 m (D) All the above

Description : Referring of given figure, pick up the correct statement from the following: (A) The total length of centre line of four walls is 20 m (B) Length of long wall out-to-out is 6.80 m (C) Length of short walls in-to-in is 3.20 m (D) All the above

Last Answer : (D) All the above

Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Description : Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) For channels, the shear centre does not coincide its centroid (B) The point of intersection of the bending axis with the cross section of the beam, is called shear centre (C) For I sections, the shear centre coincides with the centroid of the cross section of the beam (D) All the above

Description : Pick up the correct statement from the following:  (A) For channels, the shear centre does not coincide its centroid  (B) The point of intersection of the bending axis with the cross section ... shear centre coincides with the centroid of the cross section of the beam  (D) All the above

Last Answer : (D) All the above

In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and (A) Breadth of the wall (B) Half breadth of wall on each side (C) One fourth breadth of wall on each side (D) None of these

Description : In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and (A) Breadth of the wall (B) Half breadth of wall on each side (C) One fourth breadth of wall on each side (D) None of these

Last Answer : (B) Half breadth of wall on each side

Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in temperature causes a tape to increase in length and the measured distance is too large (C) The straight distance between end points of a suspended tape is reduced by an amount called the sag correction (D) A 100 m tape of cross section 10 mm × 0.25 mm stretches about 10 mm under 5 kg pull

Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull

Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large

Pick up the correct statement from the following: (A) In a loaded beam, the moment at which the first yield occurs is called yield moment(B) In a loaded beam, the moment at which the entire section of the beam becomes fully plastic, is called plastic moment (C) In a fully plastic stage of the beam, the neutral axis divides the section in two sections of equal area (D) All the above

Description : Pick up the correct statement from the following:  (A) In a loaded beam, the moment at which the first yield occurs is called yield moment (B) In a loaded beam, the moment at which the ... beam, the neutral axis divides the section in two sections of  equal area  (D) All the above 

Last Answer : (D) All the above 

While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Description : While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Last Answer : (D) Litre for capacity

Pick up the correct statement from the following: A. The circular section of sewers provides maximum hydraulic mean depth B. The circular sewers are provided for separate sewerage system C. The circular sewers work efficiently if the sections run at least half full D. All the above

Description : Pick up the correct statement from the following: A. The circular section of sewers provides maximum hydraulic mean depth B. The circular sewers are provided for separate sewerage system C. The circular sewers work efficiently if the sections run at least half full D. All the above

Last Answer : ANS: D

In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Description : In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Last Answer : (D) (i), (ii) and (iii)

Pick up the correct statement from the following: A. The maximum rate of storm runoff is called peak drainage discharge B. Rational method of estimating peak run off, may be used precisely for areas less than 50 hectares C. The period after which the entire area starts contributing to the runoff, is called the time of concentration D. All the above

Description : Pick up the correct statement from the following: A. The maximum rate of storm runoff is called peak drainage discharge B. Rational method of estimating peak run off, may be used precisely for ... entire area starts contributing to the runoff, is called the time of concentration D. All the above

Last Answer : ANS: D

The 'centre line method' is specially adopted for estimating (A) Circular buildings (B) Hexagonal buildings (C) Octagonal buildings (D) All the above

Description : The 'centre line method' is specially adopted for estimating (A) Circular buildings (B) Hexagonal buildings (C) Octagonal buildings (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The cross fall of the shoulder should be at least 0.5% steeper than camber (B) On super-elevated sections, the shoulders should be provided a cross fall equal to camber (C) Earthen roads in general are provided steepest cross-fall (D) All the above

Description : Pick up the correct statement from the following: (A) The cross fall of the shoulder should be at least 0.5% steeper than camber (B) On super-elevated sections, the shoulders should be provided a ... equal to camber (C) Earthen roads in general are provided steepest cross-fall (D) All the above

Last Answer : Answer: Option D

Mastic asphalt is generally used for (A) Damp proof course (B) Water proof layer (C) Partition walls (D) Both (A) and (B

Description : Mastic asphalt is generally used for (A) Damp proof course (B) Water proof layer (C) Partition walls (D) Both (A) and (B

Last Answer : Answer: Option D

The cross-sections for a highway is taken at (A) Right angle to the centre line (B) 30 metres apart (C) Intermediate points having abrupt change in gradient (D) All the above

Description : The cross-sections for a highway is taken at (A) Right angle to the centre line (B) 30 metres apart (C) Intermediate points having abrupt change in gradient (D) All the above

Last Answer : (D) All the above

The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Description : The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 degree (C) For every degree decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Description : Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 ... decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Last Answer : Answer: Option D

The thickness of a laminar boundary layer over a flat plate at two different sections P and Q are 0.8 cm and 2.4 cm respectively. If the section Q is 3.6 m downstream of P, the distance of section P from the leading edge of the plate is (a) 0.32 m (b) 0.22 m (c) 0.40 m (d) 0.53 m

Description : The thickness of a laminar boundary layer over a flat plate at two different sections P and Q are 0.8 cm and 2.4 cm respectively. If the section Q is 3.6 m downstream of P, the distance of section P from the leading edge of the plate is (a) 0.32 m (b) 0.22 m (c) 0.40 m (d) 0.53 m

Last Answer : Ans: (c) Correct Answer is: 0.45 m

Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs obtained by using three compactive energies, is called line of optimus (C) Well graded coarse grained soils can be compacted to a very high density as compared to fine grained soils (D) All the above

Description : Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs ... be compacted to a very high density as compared to fine grained soils (D) All the above

Last Answer : Answer: Option D

The plinth area of a building not includes (A) Area of the walls at the floor level (B) Internal shaft for sanitary installations up to 2 sq m. in area (C) Lift and wall including landing (D) Area of cantilevered porch

Description : The plinth area of a building not includes (A) Area of the walls at the floor level (B) Internal shaft for sanitary installations up to 2 sq m. in area (C) Lift and wall including landing (D) Area of cantilevered porch

Last Answer : (D) Area of cantilevered porch

Pick up the correct statement from the following: (A) An artificial barrier which makes the enclosed area safe for anchorage of ships, is known as break water (B) The break water whose inside is used as a platform for loading and unloading is called a mole (C) The length of the quay wall is governed by the length of the largest vessel likely to be berthed (D) All the abov

Description : Pick up the correct statement from the following: (A) An artificial barrier which makes the enclosed area safe for anchorage of ships, is known as break water (B) The break water whose inside is used ... wall is governed by the length of the largest vessel likely to be berthed (D) All the above

Last Answer : (D) All the above

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Description : The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Last Answer : (B) 2.0 m3

The application of elastic theory to the beams is based on the assumption that (a) At any cross-section, plane sections before bending remain plane after bending (b) All tensile stresses are taken up by reinforcement alone and none by the concrete. (c) Steel reinforcement is free from initial stresses when it is embedded in concrete. (d) All of the above

Description : The application of elastic theory to the beams is based on the assumption that (a) At any cross-section, plane sections before bending remain plane after bending (b) All tensile stresses are taken ... reinforcement is free from initial stresses when it is embedded in concrete. (d) All of the above

Last Answer : (d) All of the above

In a singly reinforced beam (A) Compression is borne entirely by concrete (B) Steel possesses initial stresses when embedded in concrete (C) Plane sections transverse to the centre line of the beam before bending remain plane after bending (D) Elastic moduli for concrete and steel have different values within the limits of deformation of the beam

Description : In a singly reinforced beam (A) Compression is borne entirely by concrete (B) Steel possesses initial stresses when embedded in concrete (C) Plane sections transverse to the centre line ... Elastic moduli for concrete and steel have different values within the limits of deformation of the beam

Last Answer : Answer: Option C

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2(D) D/6m(h1 - h2)3

Description : If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2 (D) D/6m(h1 - h2)3

Last Answer : (C) D/6m(h1 - h2)2

Pick up the item of work not included in the plinth area estimate (A) Wall thickness (B) Room area (C) W.C. area (D) Courtyard are

Description : Pick up the item of work not included in the plinth area estimate (A) Wall thickness (B) Room area (C) W.C. area (D) Courtyard are

Last Answer : (D) Courtyard area

Which one of the following statements regarding section 34 and section 149 of Indian Penal Code is correct? a) Common intention and common object are same b) Both are distinct offences in themselves c) Section 34 enunciates a mere principle of liability and creates no offence while section 149 creates a specific offence. d) Section 34 and 149 are mutually halping sections.

Description : Which one of the following statements regarding section 34 and section 149 of  Indian Penal Code is correct? a) Common intention and common object are same b) Both are distinct offences in ... section 149 creates a specific offence. d) Section 34 and 149 are mutually halping sections.

Last Answer : c) Section 34 enunciates a mere principle of liability and creates no offence while  section 149 creates a specific offence.

Pick up the correct statement from the following: (A) The cost of square rooms is less (B) The expenditure on the foundation and roof for the double storeyed building is nearly half of that for the ground storeyed building (C) The cost of construction of a house may be minimised by restricting the height floors (D) All the above

Description : Pick up the correct statement from the following: (A) The cost of square rooms is less (B) The expenditure on the foundation and roof for the double storeyed building is nearly half of that ... cost of construction of a house may be minimised by restricting the height floors (D) All the above

Last Answer : Answer: Option D

The Period of Joining time should be shown separately in absentee Statement The above said statement is - a. True b. False

Description : The Period of Joining time should be shown separately in absentee Statement The above said statement is - a. True b. False

Last Answer : a. True

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

A school has 4 sections of class 12, such that half the number of students of 1st section, 1/3rd of 2nd section, 1/4th of 3rd section and 1/5th of the 4th section are equal. If total number of students in class 12 is 420, find the number of students in sections 1st and 2nd. A) 180 B) 120 C) 240 D) 150 E) 260

Description : A school has 4 sections of class 12, such that half the number of students of 1st section, 1/3rd of 2nd section, 1/4th of 3rd section and 1/5th of the 4th section are equal. If total number of students in ... find the number of students in sections 1st and 2nd. A) 180 B) 120 C) 240 D) 150 E) 260

Last Answer : Answer: D Let number of students in 4 sections be A, B, C, D respectively. Then 1/2 of A = 1/3 of b = 1/4 of C = 1/5 of D So A : B : C : D = 2 : 3 : 4 : 5 [When A/2 = B/3 = C/4, then ratio A: B : C = 2 : 3 : 4] So students in 1st and 2nd section = [(2+3)/(2+3+4+5)] * 420 = 150

Boundary layer separation occurs when the (A) Pressure reaches a minimum (B) Cross-section of the channel is reduced (C) Valve is closed in a pipeline (D) Velocity of sound is reached

Description : Boundary layer separation occurs when the (A) Pressure reaches a minimum (B) Cross-section of the channel is reduced (C) Valve is closed in a pipeline (D) Velocity of sound is reached

Last Answer : (B) Cross-section of the channel is reduced

In a beam, the neutral plane (A) May be its centre (B) Passes through the C.G. of the area of cross-section (C) Does not change during deformation (D) None of these

Description : In a beam, the neutral plane  (A) May be its centre  (B) Passes through the C.G. of the area of cross-section  (C) Does not change during deformation  (D) None of these 

Last Answer : (C) Does not change during deformation

Two samples of lead oxide were separately reduced to metallic lead by heating in a current of hydrogen. The weight of lead from one oxide was half the weight of lead obtained from the other oxide. The data illustrates [AMU 1983] (A) Law of reciprocal proportions (B) Law of constant proportions (C) Law of multiple proportions (D) Law of equivalent proportions

Description : Two samples of lead oxide were separately reduced to metallic lead by heating in a current of hydrogen. The weight of lead from one oxide was half the weight of lead obtained from the other oxide. ... (B) Law of constant proportions (C) Law of multiple proportions (D) Law of equivalent proportions

Last Answer : (C) Law of multiple proportions

Shear stress in a fluid flowing in a round pipe (A) Varies parabolically across the cross-section(B) Remains constant over the cross-section(C) Is zero at the centre and varies linearly with the radius(D) Is zero at the wall and increases linearly to the centre

Description : Shear stress in a fluid flowing in a round pipe (A) Varies parabolically across the cross-section (B) Remains constant over the cross-section (C) Is zero at the centre and varies linearly with the radius (D) Is zero at the wall and increases linearly to the centre

Last Answer : (C) Is zero at the centre and varies linearly with the radius

channel is said to be of most economical cross-section, if (A) It gives maximum discharge for a given cross-sectional area and bed slope (B) It has minimum wetted perimeter (C) It involves lesser excavation for the designed amount of discharge (D) All of the above

Description : channel is said to be of most economical cross-section, if (A) It gives maximum discharge for a given cross-sectional area and bed slope (B) It has minimum wetted perimeter (C) It involves lesser excavation for the designed amount of discharge (D) All of the above

Last Answer : Answer: Option D

The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Description : The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Last Answer : (A) 1.118

Pick up the correct statement from the following: (A) The eyepiece plays no part in defining the line of sight (B) The diaphragm plays no part in defining the line of sight (C) The optical centre of the objective plays no part in defining the line of sight (D) None of these

Description : Pick up the correct statement from the following: (A) The eyepiece plays no part in defining the line of sight (B) The diaphragm plays no part in defining the line of sight (C) The optical centre of the objective plays no part in defining the line of sight (D) None of these

Last Answer : (A) The eyepiece plays no part in defining the line of sight

0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre(B) In the standard rolled channels, the shear centre is on the horizontal line passing through and away from the C.G. beyond web (C) In equal angles, the shear centre is on the horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Description : Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Last Answer : (D) All the above

The following item of earth work is not measured separately. (A) Setting out of works (B) Site clearance (C) Steps in deep excavation (D) All the above

Description : The following item of earth work is not measured separately. (A) Setting out of works (B) Site clearance (C) Steps in deep excavation (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following regarding the pressure conduits: (A) Pressure conduits are permitted to run ¾th full (B) Pressure conduits are always laid along down grades (C) The hydraulic gradient line always coincides the invert of the conduit (D) None of these

Description : Pick up the correct statement from the following regarding the pressure conduits:  (A) Pressure conduits are permitted to run ¾th full  (B) Pressure conduits are always laid along down grades  ... ) The hydraulic gradient line always coincides the invert of the conduit  (D) None of these

Last Answer : (D) None of these

Viscous force is the __________ of shear stress due to viscosity and cross-section area of flow. (A) Sum (B) Different (C) Product (D) Ratio

Description : Viscous force is the __________ of shear stress due to viscosity and cross-section area of flow. (A) Sum (B) Different (C) Product (D) Ratio

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A combined footing may be either rectangular or trapezoidal in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Description : Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A ... in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Last Answer : Answer: Option D

Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Description : Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Last Answer : (D) Tachometric method

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

Pick up the incorrect statement from the following: (A) The retaining wall should be structurally capable to resist the applied earth pressure (B) The section of the retaining wall should be so proportioned that it may not overturn by the lateral pressure (C) The retaining wall should be safe against sliding (D) To drain off water from the earth retained, weep holes are provided near the top of the retaining wall

Description : Pick up the incorrect statement from the following: (A) The retaining wall should be structurally capable to resist the applied earth pressure (B) The section of the retaining wall should be so ... off water from the earth retained, weep holes are provided near the top of the retaining wall

Last Answer : Answer: Option D