In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

In highway construction on super-elevated curves, the rolling shall proceed from
(A) Sides towards the centre
(B) Centre towards the sides
(C) Lower edge towards the upper edge
(D) Upper edge towards the lower edge
by

1 Answer

Answer :

Answer: Option C
by

Related questions

In highway construction, rolling starts from (A) Sides and proceed to center (B) Center and proceed to sides (C) One side and proceed to other side (D) Any of the above

Description : In highway construction, rolling starts from (A) Sides and proceed to center (B) Center and proceed to sides (C) One side and proceed to other side (D) Any of the above

Last Answer : Answer: Option A

no super elevation is provided on a road along curves, pot holes may develop at (A) Inner edge of the road (B) Outer edge of the road (C) Centre of the road (D) Nowhere on the road

Description : no super elevation is provided on a road along curves, pot holes may develop at (A) Inner edge of the road (B) Outer edge of the road (C) Centre of the road (D) Nowhere on the road

Last Answer : Answer: Option B

In case of a double line river, contours are (A) Stopped at the banks of the river (B) Stopped at the edge of the river (C) Drawn across the water (D) Drawn by parabolic curves having their vertex at the centre of the water

Description : In case of a double line river, contours are (A) Stopped at the banks of the river (B) Stopped at the edge of the river (C) Drawn across the water (D) Drawn by parabolic curves having their vertex at the centre of the water

Last Answer : (B) Stopped at the edge of the river

A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves towards the axis of rotation c.jumps out from the platform d.accepts a heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Description : A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves ... heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Last Answer : d. accepts a heavy bag from one of his friends standing near by and holds it in his hand

A man is standing ner the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platorm will decrease if he a.extends his arms outwards b.107 dynes c.moves towards the axis of rotation d.jumps out from that platform e.take out his coat and throws away

Description : A man is standing ner the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platorm will decrease if he a.extends his arms outwards b.107 ... towards the axis of rotation d.jumps out from that platform e.take out his coat and throws away

Last Answer : a. extends his arms outwards

Finished tolerance on 10 cm long st. edge at the centre on gauge side shall be? (i) ± 0.4 mm (ii) ± 0.1 mm (iii) ± 0.2 mm (iv) ± 0.3 mm*

Description : Finished tolerance on 10 cm long st. edge at the centre on gauge side shall be? (i) ± 0.4 mm (ii) ± 0.1 mm (iii) ± 0.2 mm (iv) ± 0.3 mm*

Last Answer : iv) ± 0.3 mm*

Finished tolerance on 1 Mt. st. edge at the centre on gauge side shall be? (i) ± 0.2 mm (ii) ± 0.3 mm (iii) ± 0.5 mm* (iv) ± 1.0 mm

Description : Finished tolerance on 1 Mt. st. edge at the centre on gauge side shall be? (i) ± 0.2 mm (ii) ± 0.3 mm (iii) ± 0.5 mm* (iv) ± 1.0 mm

Last Answer : (iii) ± 0.5 mm*

Side drains on both sides of a hill road, are essential when the road is (A) Along the spur curves (B) Along the re-entrant curves (C) In cutting (D) None of these

Description : Side drains on both sides of a hill road, are essential when the road is (A) Along the spur curves (B) Along the re-entrant curves (C) In cutting (D) None of these

Last Answer : Answer: Option C

Widening of the roads on curves in hilly region, is done (A) On the outer side (B) On the inner side (C) On the outer and inner sides equally (D) Less on outer side and more on inner side

Description : Widening of the roads on curves in hilly region, is done (A) On the outer side (B) On the inner side (C) On the outer and inner sides equally (D) Less on outer side and more on inner side

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The cross fall of the shoulder should be at least 0.5% steeper than camber (B) On super-elevated sections, the shoulders should be provided a cross fall equal to camber (C) Earthen roads in general are provided steepest cross-fall (D) All the above

Description : Pick up the correct statement from the following: (A) The cross fall of the shoulder should be at least 0.5% steeper than camber (B) On super-elevated sections, the shoulders should be provided a ... equal to camber (C) Earthen roads in general are provided steepest cross-fall (D) All the above

Last Answer : Answer: Option D

Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the transition curve with main curve (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve (C) Gradual change of gradient from zero at the tangent point to the specified amount at the junction of the transition curve with main curve (D) None of these

Description : Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the ... specified amount at the junction of the transition curve with main curve (D) None of these

Last Answer : (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve

To ensure that bullock carts may not overturn on curves, the maximum value of super-elevation, recommended by I.R.C., is (A) 1 in 10 (B) 1 in 12 (C) 1 in 15 (D) 1 in 20

Description : To ensure that bullock carts may not overturn on curves, the maximum value of super-elevation, recommended by I.R.C., is (A) 1 in 10 (B) 1 in 12 (C) 1 in 15 (D) 1 in 20

Last Answer : Answer: Option C

For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of filler (B) Dry rolling, application of filler, wet rolling and application of screening (C) Dry rolling, application of screening, wet rolling and application of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Description : For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of ... of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Last Answer : Answer: Option C

A square surface 3 m × 3 m lies in a vertical line in water pipe its upper edge at water surface. The hydrostatic force on square surface is (A) 9,000 kg (B) 13,500 kg (C) 18,000 kg (D) 27,000 kg

Description : A square surface 3 m × 3 m lies in a vertical line in water pipe its upper edge at water surface. The hydrostatic force on square surface is (A) 9,000 kg (B) 13,500 kg (C) 18,000 kg (D) 27,000 kg

Last Answer : Answer: Option B

An old male presents complaining of having numerous white lesions in the oral cavity within past few days. Prior to this the family physician prescribed chlorite tetracycline for an upper respiratory infection, the patient is taking this antibiotic for the past two weeks; lesions are relatively non-painful, slightly elevated, adhered plaques on the lip mucosa, buccal mucosa and the tongue. MOST LIKELY to be:

Description : An old male presents complaining of having numerous white lesions in the oral cavity within past  few days. Prior to this the family physician prescribed chlorite tetracycline for an upper  respiratory infection, ... plaques on the lip mucosa, buccal mucosa and  the tongue. MOST LIKELY to be: 

Last Answer : Moniliasis (Which is candidiasis) 

For the construction of highway (or railway) (A) Longitudinal sections are required (B) Cross sections are required (C) Both longitudinal and cross sections are required (D) None of these

Description : For the construction of highway (or railway) (A) Longitudinal sections are required (B) Cross sections are required (C) Both longitudinal and cross sections are required (D) None of these

Last Answer : (C) Both longitudinal and cross sections are required

The cross-sections for a highway is taken at (A) Right angle to the centre line (B) 30 metres apart (C) Intermediate points having abrupt change in gradient (D) All the above

Description : The cross-sections for a highway is taken at (A) Right angle to the centre line (B) 30 metres apart (C) Intermediate points having abrupt change in gradient (D) All the above

Last Answer : (D) All the above

The minimum super-elevation in rolling terrain in plains, is limited to (A) 4 % (B) 5 % (C) 6 % (D) 7 %

Description : The minimum super-elevation in rolling terrain in plains, is limited to (A) 4 % (B) 5 % (C) 6 % (D) 7 %

Last Answer : Answer: Option D

If x% is the gradient of an alignment and y% is the gradient after proper super-elevation along a curved portion of a highway, the differential grade along the curve, is (A) (x + y) % (B) (x - y) % (C) (y - x) % (D) (y + x) %

Description : If x% is the gradient of an alignment and y% is the gradient after proper super-elevation along a curved portion of a highway, the differential grade along the curve, is (A) (x + y) % (B) (x - y) % (C) (y - x) % (D) (y + x) %

Last Answer : Answer: Option C

Due to scan geometry of a satellite sensor: (A) The off-nadir resolution is degraded (B) The ground distance swept by the senor, IFOV is proportional to sec2 of scan measured from the nadir (C) The details towards the edge of the scan get compressed (D) All of these

Description : Due to scan geometry of a satellite sensor: (A) The off-nadir resolution is degraded (B) The ground distance swept by the senor, IFOV is proportional to sec2 of scan measured from the nadir (C) The details towards the edge of the scan get compressed (D) All of these

Last Answer : Answer: Option D

To ensure uniform pressure distribution, the thickness of the foundation, isA) Kept uniform throughout (B) Increased gradually towards the edge (C) Decreased gradually towards the edge (D) Kept zero at the edge

Description : To ensure uniform pressure distribution, the thickness of the foundation, is A) Kept uniform throughout (B) Increased gradually towards the edge (C) Decreased gradually towards the edge (D) Kept zero at the edge

Last Answer : Answer: Option C

The blades of a centrifugal impeller are said to be curved forward, if the __________ of the motion of impeller blades. (A) Inlet tip of a blade curves in a direction opposite to that (B) Outlet tip of a blade curves in a direction opposite to that (C) Inlet tip of a blade is towards the direction (D) Outlet tip of a blade is towards the direction

Description : The blades of a centrifugal impeller are said to be curved forward, if the __________ of the motion of impeller blades. (A) Inlet tip of a blade curves in a direction opposite to that (B) Outlet tip ... Inlet tip of a blade is towards the direction (D) Outlet tip of a blade is towards the direction

Last Answer : (D) Outlet tip of a blade is towards the direction

Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability to be cast, rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Last Answer : (A) High strength to weight ratio

Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as (A) 1/8th of the span (B) 1/10th of the span (C) 1/12th of the span (D) 1/16th of the span

Description : Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as (A) 1/8th of the span (B) 1/10th of the span (C) 1/12th of the span (D) 1/16th of the span

Last Answer : Answer: Option C

Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of the column (C) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Last Answer : Answer: Option C

Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Description : Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Last Answer : Answer: Option B

In a singly reinforced beam, the effective depth is measured form the compression edge to the (a) Tensile edge (b) Centre of tensile reinforcement (c) Neutral axis of the beam (d) All of the above

Description : In a singly reinforced beam, the effective depth is measured form the compression edge to the (a) Tensile edge (b) Centre of tensile reinforcement (c) Neutral axis of the beam (d) All of the above

Last Answer : (b) Centre of tensile reinforcement

The convexity provided to the carriageway between the crown and edge of the pavement, is known as (A) Super-elevation (B) Camber (C) Height of the pavement (D) None of these

Description : The convexity provided to the carriageway between the crown and edge of the pavement, is known as (A) Super-elevation (B) Camber (C) Height of the pavement (D) None of these

Last Answer : Answer: Option B

Before providing super-elevation on roads, the portion of the carriageway between the crown and the outer edge is made (A) To have a reduced fall (B) Horizontal (C) To have slope of the camber on the other half of the carriageway (D) None of these

Description : Before providing super-elevation on roads, the portion of the carriageway between the crown and the outer edge is made (A) To have a reduced fall (B) Horizontal (C) To have slope of the camber on the other half of the carriageway (D) None of these

Last Answer : Answer: Option C

Raising of outer edge of a road with respect to inner edge, is known (A) Super elevation (B) Cant (C) Banking (D) All the above

Description : Raising of outer edge of a road with respect to inner edge, is known (A) Super elevation (B) Cant (C) Banking (D) All the above

Last Answer : Answer: Option D

If the width of carriage way is 12.5 metres, outer edge 50 cm higher than the inner edge, the required super elevation is (A) 50 cm (B) 1 in 25 (C) 1 in 400 (D) 1 in 40

Description : If the width of carriage way is 12.5 metres, outer edge 50 cm higher than the inner edge, the required super elevation is (A) 50 cm (B) 1 in 25 (C) 1 in 400 (D) 1 in 40

Last Answer : Answer: Option B

The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these

Description : The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these

Last Answer : Answer: Option C

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Last Answer : (C) Upwards at its upper end

In tropical regions, (A) The surface gets heated more effectively than the arctic areas (B) After heating, the air becomes lighter and is displaced by cool air from the polar regions (C) The rising tropical air flows towards the polar region in the upper strata (D) All of the above

Description : In tropical regions, (A) The surface gets heated more effectively than the arctic areas (B) After heating, the air becomes lighter and is displaced by cool air from the polar regions (C) The rising tropical air flows towards the polar region in the upper strata (D) All of the above

Last Answer : (D) All of the above

During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, but is dependent on the geometry of the impeller (C) Froude number is used to account for the effect of surface (e.g., the centre vortex) on the power number (D) All (A), (B) and (C)

Description : During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, ... , the centre vortex) on the power number (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

There are two points on a highway a,b. They are 70 km apart. An auto starts from A and another auto starts from B simultaneously. If they travel in the same direction, they meet in 7 hours, but if they travel towards each other they meet in 1 hour. Find how fast the two autos are -Maths 10th

Description : There are two points on a highway a,b. They are 70 km apart. An auto starts from A and another auto starts from B simultaneously. If they travel in the same direction, they meet in 7 hours, but if they travel towards each other they meet in 1 hour. Find how fast the two autos are -Maths 10th

Last Answer : When they travel in same direction, suppose they meet when B travels for x m, then A will have travelled 70+x m in the same time Since, Speed =TimeDistance Speed of auto at A =7x+70 And Speed of auto at B =7x ... So, Speed of auto at A =7x+70 =7280 =40km/hr Speed of auto at B =7x =7210 =30km/hr

The lower edge of the pitched roof, from where the rain water of the roof surface drops down, is known as (A) Hip (B) Gable (C) Ridge (D) Eaves

Description : The lower edge of the pitched roof, from where the rain water of the roof surface drops down, is known as (A) Hip (B) Gable (C) Ridge (D) Eaves

Last Answer : Answer: Option D

When a column is supported throughout its length either by masonry walls or by construction on all the sides, then its slenderness ratio is (a) Infinite (b) Zero (c ) Reasonably high (d) Low

Description : When a column is supported throughout its length either by masonry walls or by construction on all the sides, then its slenderness ratio is (a) Infinite (b) Zero (c ) Reasonably high (d) Low

Last Answer : (b) Zero

Why do some people get in the Carpool lane, then proceed to drive at a speed lower than the speed of the lanes of the regular freeway?

Description : Why do some people get in the Carpool lane, then proceed to drive at a speed lower than the speed of the lanes of the regular freeway?

Last Answer : Because they’re American.

Proteins that cause reactions to proceed more rapidly and lower the energy of activation are called.

Description : Proteins that cause reactions to proceed more rapidly and lower the energy of activation are called.

Last Answer : ANSWER: ENZYMES

Closed contours of decreasing values towards their centre, represent (A) A hill (B) A depression (C) A saddle or pass (D) A river bed

Description : Closed contours of decreasing values towards their centre, represent  (A) A hill  (B) A depression  (C) A saddle or pass  (D) A river bed

Last Answer : (B) A depression 

Pick up the correct statement from the following: (A) In the earth's magnetic field, a magnetic needle rests in magnetic meridian (B) The angle between the true meridian and the magnetic meridian is called magnetic variation (C) One end of the magnetic needle supported at its centre of gravity tends to dip down towards the nearer magnetic pole of the earth (D) All the above

Description : Pick up the correct statement from the following: (A) In the earth's magnetic field, a magnetic needle rests in magnetic meridian (B) The angle between the true meridian and the magnetic meridian is ... gravity tends to dip down towards the nearer magnetic pole of the earth (D) All the above

Last Answer : (D) All the above

The weight of a body is due to (A) Centripetal force of earth (B) Gravitational pull exerted by the earth (C) Forces experienced by body in atmosphere (D) Gravitational force of attraction towards the centre of the earth

Description : The weight of a body is due to  (A) Centripetal force of earth  (B) Gravitational pull exerted by the earth  (C) Forces experienced by body in atmosphere  (D) Gravitational force of attraction towards the centre of the earth 

Last Answer : (D) Gravitational force of attraction towards the centre of the earth 

Spacing of stirrups in a rectangular beam, is (A) Kept constant throughout the length (B) Decreased towards the centre of the beam (C) Increased at the ends (D) Increased at the centre of the beam

Description : Spacing of stirrups in a rectangular beam, is (A) Kept constant throughout the length (B) Decreased towards the centre of the beam (C) Increased at the ends (D) Increased at the centre of the beam

Last Answer : Answer: Option D

The centre to centre spacing of vertical stirrups, in a rectangular beam, is (a) Increased towards the centre of the span of the beam (b) Decreased towards the centre of the span of the beam. (c) Increased at the ends. (d) None of these

Description : The centre to centre spacing of vertical stirrups, in a rectangular beam, is (a) Increased towards the centre of the span of the beam (b) Decreased towards the centre of the span of the beam. (c) Increased at the ends. (d) None of these

Last Answer : (a) Increased towards the centre of the span of the beam

If you were driving down the freeway at nighttime during construction work and spotted several Highway Patrol officers near the construction area with their lights on would you a: speed up b: slow down c: continue at the same speed (assuming that this is a multi-lane freeway and you are able to go at or above typical freeway speeds)

Description : If you were driving down the freeway at nighttime during construction work and spotted several Highway Patrol officers near the construction area with their lights on would you a: speed up b: slow down c: ... this is a multi-lane freeway and you are able to go at or above typical freeway speeds)

Last Answer : I always slow down for construction sites. Those “My Daddy Works Here!” signs got me.

When making a location location decision decision at the country country level, which of these would be considered? a. corporate corporate desires desires b. land/construction costs land/construction costs c. air, rail, highway, highway, waterway waterway systems systems d. zoning restrictions restrictions e. location of markets

Description : When making a location location decision decision at the country country level, which of these would be considered? a. corporate corporate desires desires b. land/construction costs land/ ... , highway, waterway waterway systems systems d. zoning restrictions restrictions e. location of markets

Last Answer : e. location of markets

State the requirement of good quality material which plays the major role in highway construction

Description : State the requirement of good quality material which plays the major role in highway construction

Last Answer : The materials which plays major role in highway construction are: a) Soil b) Bitumen c) Cement d) Stone e) Concrete f) Sand Requirements: a) Soil: i) It should be clean and coarse. ii ... . vii) It should be strong and durable. It should be clean and free from coatings of clay and silt.

Instantaneous centre for a rolling wheel on a straight track will be at a.107 dynes b.A c.B d.C e.D

Description : Instantaneous centre for a rolling wheel on a straight track will be at a.107 dynes b.A c.B d.C e.D

Last Answer : e. D