Describe with neat labeled diagram measurement of flow using turbine flow meter.

Describe with neat labeled diagram measurement of flow using turbine flow meter.
by

1 Answer

Answer :

image

Explanation: - Turbine flow meter s are volumetric flow meters and are available in wide ranges. The output is usually in the form of a digital electrical signal whose frequency is directly proportional to flow rate and whose total count is proportional to flow rate and whose total quantity, as each pulse represents a discrete volume.

A feature of this turbine meter is a hydraulically supported turbine rotor. A permanent magnet sealed inside the rotor body is polarized at 900 to the axis of the rotation. As the rotor rotates so does the magnet and therefore rotating magnetic field is produced. This produces an a.c voltage pulse in the pick-up coil located external to the meter housing. The frequency of this voltage is directly proportional to the rate of flow. The pulse can be totalized by a counter to give the value of total flow over a particular interval of time.

by

Related questions

Explain with neat labelled diagram measurement of flow using venturi meter

Description : Explain with neat labelled diagram measurement of flow using venturi meter

Last Answer : Explanation: It is a primary element of differential pressure Flow meters. 1) It consists of a straight inlet section, a converging conical inlet section, a cylindrical throat and diverging recovery ... abruptly, so permanent pressure loss or energy loss is very low as compared to orifice plate.

Describe Turbine flow meter with neat sketch.

Description : Describe Turbine flow meter with neat sketch.

Last Answer : Turbine flow meter: Diagram Description: It consists of a multibladed wheel mounted in a pipe along an axis parallel to the direction of fluid flow in the pipe. The flow of liquid past the ... each blade on the turbine wheel moves past it and these pulses are measured by a pulse counter. 

Draw a neat labeled block diagram of 3-phase Electronic Energy meter.

Description :  Draw a neat labeled block diagram of 3-phase Electronic Energy meter.

Last Answer : Labeled diagram of 3-phase electronic energy meter:

The instrument for measurement of flow/ velocity is________. A. Bimetallic. C) Turbine meter. B. Manometer. D) Wattmeter

Description : The instrument for measurement of flow/ velocity is________. A. Bimetallic. C) Turbine meter. B. Manometer. D) Wattmeter

Last Answer : Turbine meter

Describe the structure of ovule with the help of neat labeled diagram

Description : Describe the structure of ovule with the help of neat labeled diagram

Last Answer : Ans: Ovules are seen in flowering plants. In Gymnosperms they are exposed and in angiosperms they are enclosed.   Typical ovule has a stalk known as Funiculus and ovule body. ... as in Monocots and Polypetalae and ategmic without integuments as in parasites such as Balanophora, Loranthus.  

Define cementation. Describe sherardizing with help of neat labeled diagram

Description : Define cementation. Describe sherardizing with help of neat labeled diagram

Last Answer : Cementation: Cementation is the process in which metal coatings are obtained by heating the base metal in a revolving drum containing a powder of the coating metal.   Process: i) The iron articles ... iron forming Fe - Zn alloy at the surface which protects iron surface from corrosion.   

Describe Bessemerization process with neat labeled diagram

Description : Describe Bessemerization process with neat labeled diagram 

Last Answer : After smelting the molten matte is then transferred to a Bessemer converter which is a pear shaped furnace made up of steel and internally lined with lime or magnesia. It is mounted on trunnions and can ... on the surface of copper hence it is called as blister copper. It is 96 to 98% pure

Describe smelting process with neat labeled diagram.

Description : Describe smelting process with neat labeled diagram.

Last Answer : Roasted copper ore is then mixed with coke & sand particles & then strongly heated at about 13500 C in a water jacketed blast furnace. At high temperature ferrous sulphide (FeS) is oxidised & ... of ferrous sulphide (FeS) is called as matte which is then removed from the lower outlet.

Describe the construction and Operation of Buchholz relay with neat labeled diagram.

Description : Describe the construction and Operation of Buchholz relay with neat labeled diagram.

Last Answer : Construction of Buchholz Relay: It takes the form of a domed vessel placed in the connecting pipe between the main tank and the conservator. The device has two elements. The upper element ... manner that it senses the sudden violent movement of oil/gas from transformer tank to conservator. 

Describe the operation of turbine flow meter.

Last Answer : Explanation: - Turbine flow meters are volumetric flow meters and are available in wide ranges. The output is usually in the form of a digital electrical signal whose frequency is directly proportional to ... by a counter to give the value of total flow over a particular interval of time.

OLED TV with neat labeled diagram.

Description :  OLED TV with neat labeled diagram.

Last Answer : Construction: As shown in Fig. any type of OLED is made of the following components 1. An emissive layer. 2. A conducting layer. 3. A substrate. 4. Anode and ... by using a number of organic layers. The intensity of an OLED display increases with increase in current.

Draw neat labeled diagram of AC track circuit. Also give two advantages of AC track circuit.

Description : Draw neat labeled diagram of AC track circuit. Also give two advantages of AC track circuit.

Last Answer : AC Track Circuit:  Advantages of AC Track Circuit: 1. Free from effects of stray currents. 2. Track circuit is up to a long length of track in one section length up to 3km to 5 km. 3. Cheaper in costs as compared to DC track circuit. 4. Easy to install than DC track circuit. 

Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Description : Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Last Answer : Functions of equipment: 1) circuit breaker: disconnects the locomotive equipment from the supply in the event of fault in the equipment / loco. 2) On load tap changer, used to control the ... 6) Traction motor: operates as per the required operating characteristics to take on the traction load.

Draw a neat labeled diagram to show protective system for AC traction and give the function of each relay used in it.

Description : Draw a neat labeled diagram to show protective system for AC traction and give the function of each relay used in it. 

Last Answer : Protective system for AC traction:  Function Of Each Relay: For transformer -  Inverse time over current relay- as back up protection on primary (HV side) over current ... against faults near substation  Under voltage relay - protection against faults far away from substation

Draw a neat labeled diagram of Automatic Weight Tensioning and Temperature Compensation and give any two advantages of the same.

Description : Draw a neat labeled diagram of Automatic Weight Tensioning and Temperature Compensation and give any two advantages of the same.

Last Answer :  figure of automatic weight tensioning Advantages of automatic weight tensioning and temperature compensation:  Sparkless current collection at higher speeds.  OHE becomes more dynamically ... of unregulated OHE.  Because of fixed tension, fluctuations in the height are minimized

Describe with neat circuit diagram the method of measurement of power in a High voltage, high current a.c circuit.

Description : Describe with neat circuit diagram the method of measurement of power in a High voltage, high current a.c circuit.

Last Answer : Circuit diagram:  Explanation:  The primary winding of P.T is connected across high voltage side and secondary winding is connected to pressure coil of low range wattmeter. The high voltage is ... is used Real power consumed = reading of wattmeter x ratio of C.T x ratio of P.T

Explain the working and principle of electromagnetic flow meter with neat diagram.

Description : Explain the working and principle of electromagnetic flow meter with neat diagram.

Last Answer : Electromagnetic flow meter:  Principle: Electromagnetic flow meter works on the principle of Faraday's law of electromagnetic induction which states that when a current carrying conductor moves through stationary ... of fluid changes causing the induced emf to change. Diagram:

Draw neat labeled diagram of optical pyrometer.

Description : Draw neat labeled diagram of optical pyrometer.

Last Answer :  optical pyrometer

Explain the “Differential Protection Scheme” used for alternators with neat labeled diagram.

Description : Explain the “Differential Protection Scheme” used for alternators with neat labeled diagram.

Last Answer : Differential Protection Scheme for Alternator: Figure shows the differential protection provided to 3 phase alternator. Here identical CTs are placed on both sides of 3 phase alternator and ... causing its operation. Relay sends trip signal to the CB, thereby alternator circuit is tripped.

Explain with neat labeled circuit diagram the staircase wiring in which a lamp is controlled from two different locations.

Description : Explain with neat labeled circuit diagram the staircase wiring in which a lamp is controlled from two different locations. 

Last Answer : one lamp controlled from two places: Explanation: 1. The switch S1 (two way switch is located at bottom position of the staircase. 2. The switch S2 is located at top ... the position of S2 lamp will become OFF due to current discontinuity * This process remains continuously 

Describe working principle of radiation level measurement with neat diagram.

Description : Describe working principle of radiation level measurement with neat diagram.

Last Answer : Radiation type level measurement. Is non contact type detector which is used where electrical method would not survive. working principle 1.It consist of gamma ray source holder on one side ... 7. Thus, when liquid level rises, the amount of radiation received is reduced and vice versa.

Describe with neat circuit diagram the measurement procedure of earth resistance for an installation.

Description : Describe with neat circuit diagram the measurement procedure of earth resistance for an installation. 

Last Answer : Following procedure (Method) for testing of earth pit resistance with necessary diagrams. 1) Earth Tester : i) Three point method ii) Four point method 2) By Potential drop method 3) Water ... of that earthing pit. In this test the accuracy is less but electrical rods are not required.  

Draw and explain the working principle of turbine type flow meter. Mention its Application area.

Description : Draw and explain the working principle of turbine type flow meter. Mention its Application area.

Last Answer : Working Principle: The flow of liquid past the wheel causes the wheel to rotate at a rate which is proportional to the velocity of the fluid. A voltage pulse is induced in ... Suitable for low viscosity high flow measurements 3) Used in petrochemical industries, in Aerospace applications etc.

With neat diagram, explain working of capacitance level measurement.

Description : With neat diagram, explain working of capacitance level measurement.

Last Answer : working : The capacitive level detector operates on the equation of parallel plate capacitor, i.e. C = ε A/d. It consist of an insulated capacitance probe (which is a metal electrode) ... in the capacitance is measured and is displayed on the indicator calibrated in terms of liquid level. 

With a neat diagram explain pelton wheel turbine.

Description : With a neat diagram explain pelton wheel turbine.

Last Answer : Diagram of Pelton Wheel:-  Construction of Pelton Wheel Turbine:  1. Runner with Bucket: The runner of a pelton turbine consists of a number of double cupped buckets surrounded ... necessary to avoid accidents, splashing race and to support the housing for the bearing and the nozzle. 

With a neat diagram, explain back pressure steam turbine co-generation system.

Description : With a neat diagram, explain back pressure steam turbine co-generation system.

Last Answer : Back pressure steam turbine co-generation system: In this type steam enters the turbine chamber at High Pressure and expands to Low or Medium Pressure. Enthalpy difference is used for generating power / work. ... , the overall thermal efficiency of the system could reach as much as 90 percent.

With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Description : With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Last Answer : (i) Steam turbine co-generation system: The two types of steam turbines most widely used are the backpressure and the extraction. Another variation of the steam turbine topping ... power. The exhaust or the extracted steam from the steam turbine provides the required thermal energy.

Describe principle of operation of Doppler type ultrasonic flow meter with diagram.

Description : Describe principle of operation of Doppler type ultrasonic flow meter with diagram. 

Last Answer : Diagram: Working:  The flow meter consists of a crystal transducer mounted outside the pipe in which flow is to be measured. This transducer is a piezoelectric crystal which ... , so the frequency of the reflected wave is shifted to particle velocity, according to Doppler principle.

With neat diagram explain calibration of energy meter by direct loading method.

Description : With neat diagram explain calibration of energy meter by direct loading method.

Last Answer : Calibration of Energy Meter by Direct Loading Method:  There are three methods for testing/calibration:  1. Long period dial test  2. Using rotary sub- standard meter  3. Using precision grade instruments  All ... of substandard meter in kWh  Then % error = [(D - DS)/DS] x 100

With neat sketch describe working of reaction turbine.

Description : With neat sketch describe working of reaction turbine.

Last Answer : Working principle of reaction turbine- -A turbine in which steam pressure decreases gradually while expanding through the moving as well as through the fixed blade is known as reaction turbine. -In pure ... the steam to leave the moving blade as higher velocity than as which it entered.

Explain the capacitance type level measurement method with neat diagram.

Description : Explain the capacitance type level measurement method with neat diagram.

Last Answer : Capacitance level indicator  Explanation: It consists of two conductors separated from each other by dielectric material between them. There is an insulated capacitance probe fixed near and parallel to ... , the dielectric constant changes due to which capacitance changes. Thus any change.

Explain with neat diagram working of Mc Leod gauge used for vacuum measurement.

Description : Explain with neat diagram working of Mc Leod gauge used for vacuum measurement.

Last Answer : Mc Leod gauge:  Working: To operate the gauge, the piston is first withdrawn, causing the level of mercury in the lower part of the gauge to fall below the level of the junction between the two tubes. ... the fluid.  The expression for calculating the unknown pressure is Diagram: 

Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Description : Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.  

Describe with labeled diagram the process of electroplating of silver.

Description : Describe with labeled diagram the process of electroplating of silver.

Last Answer : 1. Electroplating of silver on iron - spoon is carried out in a rectangular steel tank. 2. Iron spoon, which is to be electroplated, is cleaned by boiling with caustic soda in order ... spoon gets plated with silver. Silver anode gets slowly dissolve in solution by giving Ag+ ions. 

Describe with working of LCR meter for measurement of inductance.

Description : Describe with working of LCR meter for measurement of inductance. 

Last Answer : working of LCR:- A LCR meter (Inductance (L), Capacitance (C), and Resistance (R) test equipment used to measure the inductance, capacitance and, resistance of a component. It works on the ... in parallel (as would be encountered in measuring a capacitor with a leaky dielectric) [Q setting ] 

Describe with a neat diagram, the process of any one type of electric welding.

Description : Describe with a neat diagram, the process of any one type of electric welding. 

Last Answer : Methods of electric welding :  1. Resistance welding  i Butt welding  ii Spot welding  iii Seam welding  iv Projection welding  2. Arc Welding  i Carbon arc welding  ii ... as copper, iron etc. The electric arc effectively concentrate heat on the surfaces it is desired to join.

Describe with neat diagram working of DC tacho-generator.

Description : Describe with neat diagram working of DC tacho-generator. 

Last Answer : Explanation : The D.C Tachogenerators is a type of electrical type's tachogenerators which can also be used for speed measurement.The D.C tachogenerator is shown in above figure. The ... to collect current from commutator and make it available to external circuitry of the d.c tachogenerator.

Describe with neat diagram, how temperature is measured by Gas filled thermometer.

Description : Describe with neat diagram, how temperature is measured by Gas filled thermometer.

Last Answer : Explanation:- If volume of a gas is maintained at constant and If a certain volume of inert gas is enclosed in a bulb, capillary and bourdon tube, the most of the gas in the bulb, then the ...   Name of the gases used in Gas filled thermometers.  1. Nitrogen 2. Helium 3. Inert Gas 

What is pyrometry? Describe working of optical pyrometer with neat diagram.

Description : What is pyrometry? Describe working of optical pyrometer with neat diagram.

Last Answer : Explanation- The working principle of optical pyrometer state that the brightness of light of a given color emitted by a hot source, gives an indication of temperature.  Working: It ... the source and brightness produced by the filament are equal, the outline of the filament disappear.

Describe with neat diagram phase sequence indicator.

Description : Describe with neat diagram phase sequence indicator.

Last Answer : Phase Sequence Indicator: There are two types of phase sequence indicators: (a) Rotating type phase sequence indicator (b) Static type phase sequence indicator (a) Rotating Type Phase Sequence ... of the supply is reversed or altered, then the lamp 1 will glow brighter than the lamp 2.

Describe with neat diagram air friction damping.

Description : Describe with neat diagram air friction damping. 

Last Answer : Air Friction Damping: Here air trapped in the chamber works as damping medium for the piston movement connected to the spindle. The piston moves in the air chamber. The clearance between piston and ... will be the damping torque, bringing the pointer to the equilibrium position quickly. 

Describe the concept of leakage flux, useful flux and fringing with neat diagram.

Description : Describe the concept of leakage flux, useful flux and fringing with neat diagram.

Last Answer : Leakage Flux

Describe capacitive type proximity switch with neat diagram.

Description : Describe capacitive type proximity switch with neat diagram.

Last Answer : Its a type of a switch controlled by action of storing energy and then releasing it.

Sketch constructional diagram of the operation of electromagnetic flow meter. State its two limitations.

Description : Sketch constructional diagram of the operation of electromagnetic flow meter. State its two limitations.

Last Answer : Limitations: 1. It is used only for liquids. 2. It is not suitable for low velocity. 3. It is more expensive. 4. It is suitable for fluids having conductivity greater than 20 micro ohm/cm. 5. Gas inclusion cause errors. 6. Difficulties in on site calibration

Explain the Mechatronics system with the help of block diagram and labeled the various elements.

Description : Explain the Mechatronics system with the help of block diagram and labeled the various elements. 

Last Answer : The key elements of Mechatronics systems can be classified under following categories:  Information systems  Mechanical systems  Electrical systems  Computer systems  Sensor and actuators  ... is adjusted based on generated error and again signal is given to actuators and sensors.

Draw a labeled block diagram of sine wave generator and state function of each block.

Description : Draw a labeled block diagram of sine wave generator and state function of each block. 

Last Answer : Function Generator:  This instrument can deliver sine, triangular & square waves with frequency range of 0.01 Hz to 100 kHz.  The frequency control network is governed by a frequency ... voltage reaches a predetermined level on the negative slope of the integrator's output voltage.

Describe working of A.C. voltmeter using half wave rectifier with neat circuit diagram.

Description : Describe working of A.C. voltmeter using half wave rectifier with neat circuit diagram. 

Last Answer : AC Voltmeter using Half Wave Rectifier : The a.c. voltmeter using half wave rectifier is achieved by introducing a diode in a basic d.c. voltmeter. This is shown in the Fig. 1. The diode D ... can be obtained for a.c. voltmeter as, Where Idc is the full scale deflection current..

Explain the electro-magnetic flow meter with neat sketch and write it’s application.

Description : Explain the electro-magnetic flow meter with neat sketch and write it’s application. 

Last Answer : Electromagnetic flow meter: Principle of Operation: 1. The operation of an Electro-magnetic flow meter is based upon Faraday's Law, which states that the voltage induced across any conductor as it ... rates. It can be also used for measurement of flow rate of slurries, greasy materials.

Explain the requirements of good formwork with names and materials proposed for beam of size 300 X 450 mm with neat labeled sketch.

Description : Explain the requirements of good formwork with names and materials proposed for beam of size 300 X 450 mm with neat labeled sketch.  

Last Answer : Requirements of good formwork:- 1. It should be adequately strong to withstand an extensive variety of dead and live loads. For instance, self-weight, weight of reinforcement, weight of wet concrete, loads of ... of concreting. 8. It should be lightweight. 9. It should be easy to remove.

Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Description : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Last Answer : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.