Which statements about alkenes and alkanes of corresponding chain lengths is true? (I) Alkenes have slightly lower melting points than alkanes (II) Alkenes have slightly higher melting points than alkanes (III) Alkenes have higher boiling points than alkanes (IV) Alkenes have lower boiling points than alkanes (a) I and III (b) II and IV (c) I and IV (d) II and III

Which statements about alkenes and alkanes of corresponding chain lengths
is true?
(I) Alkenes have slightly lower melting points than alkanes
(II) Alkenes have slightly higher melting points than alkanes
(III) Alkenes have higher boiling points than alkanes
(IV) Alkenes have lower boiling points than alkanes
(a) I and III
(b) II and IV
(c) I and IV
(d) II and III
by

1 Answer

Answer :

I and III
by

Related questions

The high boiling points of alcohols, as compared to the corresponding alkanes, are due to (a) Hydrogen bonding (b) Heavy oxygen atom (c) Water solubility(d) None of these

Description : The high boiling points of alcohols, as compared to the corresponding alkanes, are due to (a) Hydrogen bonding (b) Heavy oxygen atom (c) Water solubility (d) None of these

Last Answer : Hydrogen bonding

Primary alcohols have boiling points that are _____________ the corresponding aldehydes. (a) Lower than (b) Higher than (c) About the same

Description : Primary alcohols have boiling points that are _____________ the corresponding aldehydes. (a) Lower than (b) Higher than (c) About the same

Last Answer : Higher than

How do the melting points of trans isomers compare to the cis isomers for alkenes? (a) cis isomers have higher melting points (b) trans isomers have higher melting points (c) both have similar melting points (d) no consistent trend is observed

Description : How do the melting points of trans isomers compare to the cis isomers for alkenes? (a) cis isomers have higher melting points (b) trans isomers have higher melting points (c) both have similar melting points (d) no consistent trend is observed

Last Answer : trans isomers have higher melting points

Why do trans isomers of alkenes have lower boiling points than cis isomers? (a) trans isomers have better symmetry (b) cis isomers have better symmetry (c) trans isomers are less polar (d) cis isomers are less polar

Description : Why do trans isomers of alkenes have lower boiling points than cis isomers? (a) trans isomers have better symmetry (b) cis isomers have better symmetry (c) trans isomers are less polar (d) cis isomers are less polar

Last Answer : trans isomers are less polar

Long chain alkanes or alkenes containing terminal carboxylic acid ( – COOH) are called

Description : Long chain alkanes or alkenes containing terminal carboxylic acid ( – COOH) are called

Last Answer : fatty acid.

The branching of alkanes that produces symmetrical structures : (a) raises the boiling point ; raises the melting point (b) raises the boiling point ; lowers the melting point (c) lowers the boiling point ; lowers the melting point (d) lowers the boiling point ; raises the melting point

Description : The branching of alkanes that produces symmetrical structures : (a) raises the boiling point ; raises the melting point (b) raises the boiling point ; lowers the melting point (c) lowers the boiling point ; lowers the melting point (d) lowers the boiling point ; raises the melting point

Last Answer : raises the boiling point ; raises the melting point

As the molecular weight of alkanes increases, how do the boiling point and melting point change? (a) boiling point increases ; melting point increases. (b) boiling point increases ; melting point increases. (c) boiling point increases ; melting point decreases (d) boiling point increases ; melting point increases sequentially for alkanes over four carbons.

Description : As the molecular weight of alkanes increases, how do the boiling point and melting point change? (a) boiling point increases ; melting point increases. (b) boiling point increases ; ... decreases (d) boiling point increases ; melting point increases sequentially for alkanes over four carbons.

Last Answer : boiling point increases ; melting point increases sequentially for alkanes over four carbons.

Saturated hydrocarbons are called - (1) Alkynes (2) Alkenes (3) Alkanes (4) All of the above

Description : Saturated hydrocarbons are called - (1) Alkynes (2) Alkenes (3) Alkanes (4) All of the above

Last Answer : (3) Alkanes Explanation: Carbon compounds which contain just carbon and hydrogen are called hydrocarbons. Among these, the saturated hydrocarbons are called alkanes. The unsaturated hydrocarbons which contain one or more double bonds are called alkenes.

Cycloalkanes have the same molecular formula as : (a) Alkanes (b) Alkenes (c) Alkynes (d) Cycloalkenes

Description : Cycloalkanes have the same molecular formula as : (a) Alkanes (b) Alkenes (c) Alkynes (d) Cycloalkenes

Last Answer : Alkenes

Ninhydrin test is given by (a) Carbohydrates (b) Proteins (c) Alkanes (d) Alkenes

Description : Ninhydrin test is given by (a) Carbohydrates (b) Proteins (c) Alkanes (d) Alkenes

Last Answer : Proteins

Which of the following classes of compounds is unreactive toward sulfuric acid? (a) Alkanes (b) Alcohols (c) Alkenes (d) Alkynes

Description : Which of the following classes of compounds is unreactive toward sulfuric acid? (a) Alkanes (b) Alcohols (c) Alkenes (d) Alkynes

Last Answer : Alkanes

A family of organic compounds containing only carb and hydrogen and having only single bonds are the: w) alkenes and alkanes x) alkanes and cycloalkanes y) alkynes (pron: AL-kines) and alkenes z) cycloalkanes and alkenes

Description : A family of organic compounds containing only carb and hydrogen and having only single bonds are the: w) alkenes and alkanes x) alkanes and cycloalkanes y) alkynes (pron: AL-kines) and alkenes z) cycloalkanes and alkenes

Last Answer : ANSWER: B -- ALKANES AND CYCLOALKANES

Which of the following group of compounds is most soluble in water? w) alkanes (pron: ak-KANES) x) alcohols y) aldehydes (pron: al-deh-HIDES) z) alkenes (pron: al-KEENS)

Description : Which of the following group of compounds is most soluble in water? w) alkanes (pron: ak-KANES) x) alcohols y) aldehydes (pron: al-deh-HIDES) z) alkenes (pron: al-KEENS)

Last Answer : ANSWER: X -- ALCOHOLS

A family of organic compounds whose molecules will add water under an acid catalysis and change into alcohols are the: w) alkenes x) alkanes y) aromatic hydrocarbons z) cycloalkanes

Description : A family of organic compounds whose molecules will add water under an acid catalysis and change into alcohols are the: w) alkenes x) alkanes y) aromatic hydrocarbons z) cycloalkanes

Last Answer : ANSWER: W -- ALKENES

Hydrocarbons that contain a triple bond between carbon atoms are known as: w) alkenes x) alkanes y) alkynes z) polymers

Description : Hydrocarbons that contain a triple bond between carbon atoms are known as: w) alkenes x) alkanes y) alkynes z) polymers

Last Answer : ANSWER: Y -- ALKYNES

Which of the following are saturated aliphatic hydrocarbons? w) alkanes x) alkenes y) alkynes z) nixanes

Description : Which of the following are saturated aliphatic hydrocarbons? w) alkanes x) alkenes y) alkynes z) nixanes

Last Answer : ANSWER: W -- ALKANES

Which of the following contain sp2 hybridized carbon atoms? w) alkanes x) alkenes y) alkynes z) cycloalkanes

Description : Which of the following contain sp2 hybridized carbon atoms? w) alkanes x) alkenes y) alkynes z) cycloalkanes

Last Answer : ANSWER: X -- ALKENES

How does the melting point of propane and ethane compare? (a) the melting point of propane is greater. (b) the melting point of ethane is greater. (c) the melting points are within 5°C of one another. (d) no relationship exists among these alkanes and their melting point

Description : How does the melting point of propane and ethane compare? (a) the melting point of propane is greater. (b) the melting point of ethane is greater. (c) the melting points are within 5°C of one another. (d) no relationship exists among these alkanes and their melting point

Last Answer : the melting point of ethane is greater.

How do the boiling points of butane, propane, and ethane compare? (a) the boiling point of ethane is greatestb) the boiling point of butane is greatest. (c) the boiling point of propane is greatest. (d) there is no relationship among these three alkanes and their boiling points.

Description : How do the boiling points of butane, propane, and ethane compare? (a) the boiling point of ethane is greatest. b) the boiling point of butane is greatest. (c) the boiling point of propane is greatest. (d) there is no relationship among these three alkanes and their boiling points

Last Answer : the boiling point of butane is greatest.

.Which of the following statements is correct about an aqueous solution of an acid and of a base? (i) Higher the pH, stronger the acid (ii) Higher the pH, weaker the acid (iii) Lower the pH, stronger the base (iv) Lower the pH, weaker the base (a) (i) and (iii) (b) (ii) and (iii (c) (i) and (iv) (d) (ii) and (iv)

Description : .Which of the following statements is correct about an aqueous solution of an acid and of a base? (i) Higher the pH, stronger the acid (ii) Higher the pH, weaker the acid (iii) Lower the pH, stronger the base (iv) Lower the pH, ... (i) and (iii) (b) (ii) and (iii (c) (i) and (iv) (d) (ii) and (iv)

Last Answer : (d) (ii) and (iv)

Give reason: Alkanes undergo only substitution reactions but alkenes and alkynes undergo both substitution and addition reactions.

Description : Give reason: Alkanes undergo only substitution reactions but alkenes and alkynes undergo both substitution and addition reactions.

Last Answer : Alkenes and alkynes have double and triple bonds, which on breaking can add hydrogen atoms to satisfy the valency.

Compare the characteristics of alkanes, alkenes and alkynes.

Description : Compare the characteristics of alkanes, alkenes and alkynes.

Last Answer : Alkanes Alkynes They are saturated They are unsaturated They are unsaturated Their general formula is C n H 2n+2 Their general formula is C n H 2n Their general formula is C n H 2n-2 They have ... ene' They have triple bond between one of the carbon atoms. Their names end with yne'

Which of the following is not a characteristic of organic compounds? (a) They usually have low melting points. (b) They usually are only slightly soluble or insoluble in water. (c) If water soluble they seldom conduct an electric current. (d) Bonds which bind the atoms together are nearly always ionic.

Description : Which of the following is not a characteristic of organic compounds? (a) They usually have low melting points. (b) They usually are only slightly soluble or insoluble in water. (c) If water ... they seldom conduct an electric current. (d) Bonds which bind the atoms together are nearly always ionic.

Last Answer : Bonds which bind the atoms together are nearly always ionic.

Which of the following statements correctly describes the general reactivity of alkynes? (a) An alkyne is an electron-rich molecule and therefore reacts as a nucleophile. (b) The σ bonds of alkynes are higher in energy than the bonds and are thus more reactive. (c) Unlike alkenes, alkynes fail to undergo electrophilic addition reactions. (d) Alkynes are generally more reactive than alkenes.

Description : Which of the following statements correctly describes the general reactivity of alkynes? (a) An alkyne is an electron-rich molecule and therefore reacts as a nucleophile. (b) The σ bonds ... fail to undergo electrophilic addition reactions. (d) Alkynes are generally more reactive than alkenes.

Last Answer : Alkynes are generally more reactive than alkenes.

Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is retained in ETC iii) heat loss due to conduction back to atmosphere from ETC is high iv) performance of evacuated tube is highly dependent upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Description : Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is ... upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Last Answer : d) i & ii

Give reason for the higher melting point and boiling point of alkali earth metals than alkali metals.

Description : Give reason for the higher melting point and boiling point of alkali earth metals than alkali metals. 

Last Answer : The melting and boiling points of these metals are higher than the corresponding alkali metals due to smaller sizes. 

The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Description : The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Last Answer : Ans:(b)

Match the four material (P, Q, R, S) given in List -I with the corresponding reaction schemes (I, II, III, IV) provided in List-II and select the corr

Description : Match the four material (P, Q, R, S) given in List -I with the corresponding reaction schemes (I, II, III, IV) provided in List-II and select the corr

Last Answer : Match the four material (P, Q, R, S) given in List -I with the corresponding reaction schemes (I, II, III, IV) ... . `{:(P,Q,R,S),(4,1,3,2):}`

Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a

Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a

Last Answer : c. i-c, ii-a, iii-d, iv-b

Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth A) i-b, ii-c, iii-d, iv-a B) i-c, ii-d, iii-a, iv-b C) i-c, ii-a, iii-d, iv-b D) i-b, ii-d, iii-c, iv-a

Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth A) i-b, ii-c, iii-d, iv-a B) i-c, ii-d, iii-a, iv-b C) i-c, ii-a, iii-d, iv-b D) i-b, ii-d, iii-c, iv-a

Last Answer : C) i-c, ii-a, iii-d, iv-b

Match the following types of variables with the corresponding programming languages: (a) Static variables (i) Local variables in Pascal (b) Stack dynamic (ii) All variables in APL (c) Explicit heap dynamic (iii) Fortran 77 (d) Implicit heap dynamic (iv) All objects in JAVA Codes: (a) (b) (c) (d) (A) (i) (iii) (iv) (ii) (B) (iv) (i) (iii) (ii) (C) (iii) (i) (iv) (ii) (D) (ii) (i) (iii) (iv)

Description : Match the following types of variables with the corresponding programming languages: (a) Static variables (i) Local variables in Pascal (b) Stack dynamic (ii) All variables in APL (c) Explicit heap dynamic (iii) Fortran 77 (d) Implicit ... (ii) (C) (iii) (i) (iv) (ii) (D) (ii) (i) (iii) (iv)

Last Answer : (C) (iii) (i) (iv) (ii) 

What are melting points and boiling points ? What is melting point and boiling point ?

Description : What are melting points and boiling points ? What is melting point and boiling point ?

Last Answer : Melting point refers to the process of melting a solid into a liquid at a certain temperature. Boiling point is the temperature at which a liquid evaporates. Therefore , the temperature at which a liquid begins to evaporate is called the 'boiling point' of that substance.

Define intermolecular forces. Also write down effect of intermolecular forces on melting points & boiling points of substances?

Description : Define intermolecular forces. Also write down effect of intermolecular forces on melting points & boiling points of substances?

Last Answer : The forces of attraction present between the molecules of a compound are called Intermolecular forces''. Effect of intermolecular forces on the m.p and b.p of substances If intermolecular forces of attractions in ... . And if these forces are weak then the m.p and b.p will be relatively lower.

Choose the incorrect statement pertaining to organic compounds (1) They have low melting and boiling points (2) They do not dissolve in water (3) They are not easily combustible (4) They contain mainly carbon and hydrogen

Description : Choose the incorrect statement pertaining to organic compounds (1) They have low melting and boiling points (2) They do not dissolve in water (3) They are not easily combustible (4) They contain mainly carbon and hydrogen

Last Answer : They are not easily combustible

Consider the three isomeric alkanes n-hexane, 2,3-dimethylbutane, and 2- methylpentane. Which of the following correctly lists these compounds in order of increasing boiling point? (a) 2,3-dimethylbutane < 2-methylpentane < n-hexane (b) 2-methylpentane < n-hexane < 2,3-dimethylbutane (c) 2-methylpentane < 2, 3-dimethylbutane < n-hexane (d) n-hexane < 2-methylpentane < 2,3-dimethylbutane

Description : Consider the three isomeric alkanes n-hexane, 2,3-dimethylbutane, and 2- methylpentane. Which of the following correctly lists these compounds in order of increasing boiling point? (a) 2,3-dimethylbutane < 2- ... < 2, 3-dimethylbutane < n-hexane (d) n-hexane < 2-methylpentane < 2,3-dimethylbutane

Last Answer : 2,3-dimethylbutane < 2-methylpentane < n-hexane

Which of the following alkanes will have the lowest boiling point? (a) n-Heptane (b) Isopentane (c) n-Hexane (d) Neopentane

Description : Which of the following alkanes will have the lowest boiling point? (a) n-Heptane (b) Isopentane (c) n-Hexane (d) Neopentane

Last Answer : Neopentane

Which of the following alkanes will have the highest boiling point? (a) n-Octane (b) Isopentane (c) n-Butane (d) Neopentane

Description : Which of the following alkanes will have the highest boiling point? (a) n-Octane (b) Isopentane (c) n-Butane (d) Neopentane

Last Answer : n-Octane

(a) What effect the branching of an alkane has on its melting point? (L-III) (b) Which of the following has highest boiling point?(L-III) (1) 2-methyl pentane. (2) 2, 3-diethyl butane. (3) 2, 2- dimethyl butane.

Description : (a) What effect the branching of an alkane has on its melting point? (L-III) (b) Which of the following has highest boiling point?(L-III) (1) 2-methyl pentane. (2) 2, 3-diethyl butane. (3) 2, 2- dimethyl butane.

Last Answer : Ans.(a) In general conception, as the branching increases packing of the molecules in the crystals becomes less close and have melting point decreases accordingly. (b) As the branching increases, ... attraction decreases and hence the boiling point decreases. So, 2-methyl pentane has highest B.pt.

The corresponding Existential Instantiation rule: for the existential quantifier is slightly more complicated. For any sentence a, variable v, and constant symbol k that does not appear elsewhere in the knowledge base. a) True b) False

Description : The corresponding Existential Instantiation rule: for the existential quantifier is slightly more complicated. For any sentence a, variable v, and constant symbol k that does not appear elsewhere in the knowledge base. a) True b) False

Last Answer : a) True

Which of the following methods can be used to increase the octane rating of gasoline? (a) Adding branched-chain alkanes (b) Adding tetraethyllead (c) Adding aromatic hydrocarbons (d) All of these

Description : Which of the following methods can be used to increase the octane rating of gasoline? (a) Adding branched-chain alkanes (b) Adding tetraethyllead (c) Adding aromatic hydrocarbons (d) All of these

Last Answer : All of these

Why is the halogenation of alkanes considered a chain reaction? (a) it occurs quickly. (b) it occurs without the generation of intermediates. (c) each step generates the reactive intermediate that causes the next step to occur. (d) the reaction allows long chains of halogenated alkanes to be formed

Description : Why is the halogenation of alkanes considered a chain reaction? (a) it occurs quickly. (b) it occurs without the generation of intermediates. (c) each step generates the reactive intermediate that causes the next step to occur. (d) the reaction allows long chains of halogenated alkanes to be formed

Last Answer : each step generates the reactive intermediate that causes the next step to occur

Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are called oils. (c) When hydrolyzed, they produce glycerol and carboxylate salts. (d) Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Description : Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are ... low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Last Answer : Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Reactivity order of the following alkenes for hydrochlorination (HCl) is (I) `CH_(2) = CH - Cl` (II) `(CH_(3))_(2)C=CH_(2)` (III) `CH_(2) = CH - CHO`

Description : Reactivity order of the following alkenes for hydrochlorination (HCl) is (I) `CH_(2) = CH - Cl` (II) `(CH_(3))_(2)C=CH_(2)` (III) `CH_(2) = CH - CHO`

Last Answer : Reactivity order of the following alkenes for hydrochlorination (HCl) is (I) `CH_(2) = CH - Cl` (II) `(CH_(3) ... `II gt I gt III` D. `III gt I gt II`

Most covalent compounds (a) Behave like electrolytes in the molten state (b) Have high melting and boiling points (c) Are hard substances because of strong covalent bonds (d) Are more soluble in non-polar solvents than in polar solvents

Description : Most covalent compounds (a) Behave like electrolytes in the molten state (b) Have high melting and boiling points (c) Are hard substances because of strong covalent bonds (d) Are more soluble in non-polar solvents than in polar solvents

Last Answer : Ans:(d)

Which of the following alkenes when passed through conc. `H_(2)SO_(4)` followed by hydrolysis with boiling water would give tert-butyl alcohol

Description : Which of the following alkenes when passed through conc. `H_(2)SO_(4)` followed by hydrolysis with boiling water would give tert-butyl alcohol

Last Answer : Which of the following alkenes when passed through conc. `H_(2)SO_(4)` followed by hydrolysis with ... B. Isobutylene C. Propylene D. But-1-ene

Out of boiling point (I), entropy (II), `pH` (III) and `e.m.f` of a cell (IV), intensive properties are:

Description : Out of boiling point (I), entropy (II), `pH` (III) and `e.m.f` of a cell (IV), intensive properties are:

Last Answer : Out of boiling point (I), entropy (II), `pH` (III) and `e.m.f` of a cell (IV), intensive properties are: A ... B. I, II C. I, II, III D. All of these

The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Description : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Last Answer : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` ... +Zn rarr Mg+ZnO` D. `ZnO+Mg rarrZn+MgO`

The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Description : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Last Answer : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a ... gt 500^(@)C " but " lt 1000^(@)C`

The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Description : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Last Answer : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a ... C. `500^(@)C` D. `1200^(@)C`

The melting and boiling points of ionic solids are (a) High (b) Low (c) Very low (d) Of intermediate range

Description : The melting and boiling points of ionic solids are (a) High (b) Low (c) Very low (d) Of intermediate range

Last Answer : Ans:(a)