Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Pick out the wrong statement pertaining to solvent extraction of oil.
Rate of extraction
(A) Decreases with decrease of thickness of the flakes
(B) Increases with the increasing flake size keeping the flake thickness
constant
(C) Increases considerably with the rise of temperature
(D) Decreases as the moisture content of flakes increases
by

1 Answer

Answer :

(D) Decreases as the moisture content of flakes increases
by

Related questions

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

Pick out the wrong statement. (A) Angle of repose of coal increases with its increasing size (B) Specific gravity of coal increases with its increasing maturity (C) Refractive index and reflectance of coal increases with the increasing rank of coal (D) Specific heat of coal decreases with increases in the volatile matter and decrease in the C/H ratio of coal

Description : Pick out the wrong statement. (A) Angle of repose of coal increases with its increasing size (B) Specific gravity of coal increases with its increasing maturity (C) Refractive index and reflectance of ... of coal decreases with increases in the volatile matter and decrease in the C/H ratio of coal

Last Answer : (D) Specific heat of coal decreases with increases in the volatile matter and decrease in the C/H ratio of coal

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement pertaining to the decomposition of PCl5 represented by, PCl5 ⇌ PCl3 + Cl2.Degree of dissociation of PCl5 will (A) Decrease on addition of Cl2 (B) Increase on addition of an inert gas at constant pressure (C) Decrease on increasing the pressure of the system (D) None of these

Description : Pick out the wrong statement pertaining to the decomposition of PCl5 represented by, PCl5 ⇌ PCl3 + Cl2.Degree of dissociation of PCl5 will (A) Decrease on addition of Cl2 (B) Increase on addition of ... at constant pressure (C) Decrease on increasing the pressure of the system (D) None of these

Last Answer : (D) None of thes

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used in solvent extraction decreases (C) The selectivity of solvent used in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used ... in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination of the moisture content (C) The absorption and porosity of an aggregate influence the property of the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above

Last Answer : Answer: Option D

Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C) With increase in oxygen content, moisture holding capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C ... capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number(A) Increases(B) Decreases(C) Remain same(D) May increase or decrease.

Description : The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number. (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease

Last Answer : (B) Decreases

Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not exceed 4 (C) Both the rolls run necessarily at the same speed (D) Reduction ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed

Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is more than that of coarse sand (C) If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Description : Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is ... the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Rate of leaching increases with increasing (A) Temperature (B) Viscosity of solvent (C) Pressure (D) Size of the solid

Description : Rate of leaching increases with increasing (A) Temperature (B) Viscosity of solvent (C) Pressure (D) Size of the solid

Last Answer : (A) Temperature

During drying of a solid, the critical moisture content increases with (A) Decreased drying rate (B) Increased thickness of the solid (C) Increased drying rate (D) Both (B) and (C)

Description : During drying of a solid, the critical moisture content increases with (A) Decreased drying rate (B) Increased thickness of the solid (C) Increased drying rate (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : C) Remains unchanged

Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, work required decreases as the temperature of the refrigerator and the temperature at which heat is rejected increases (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Description : Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, ... (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Last Answer : (A) A refrigeration cycle violates the second law of thermodynamics

Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be leached in either of Bollman extractor, Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Description : Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be ... , Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Last Answer : (A) Fine solids cannot be leached in a Pachuca tank

Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of forced draft cooling tower is reduced by the recirculation of the humid and hot discharged air (C) A natural draft cooling tower is recommended to be used, when the air humidity is low and air temperature is also low (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Description : Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of ... Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Last Answer : (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Description : Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Last Answer : (B) Wrought iron cannot be easily forged and welded

Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases

Description : Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases

Last Answer : (A) Volatile matter content increases

Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble in common solvents (C) The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Description : Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble ... (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Last Answer : (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature

Pick out the correct statement. (A) Compression ratio of an Otto engine is comparatively higher than a diesel engine (B) Efficiency of an Otto engine is higher than that of a diesel engine for the same compression ratio (C) Otto engine efficiency decreases with the rise in compression ratio, due to decrease in work produced per quantity of heat (D) Diesel engine normally operates at lower compression ratio than an Otto engine for an equal output of work

Description : Pick out the correct statement. (A) Compression ratio of an Otto engine is comparatively higher than a diesel engine (B) Efficiency of an Otto engine is higher than that of a diesel ... Diesel engine normally operates at lower compression ratio than an Otto engine for an equal output of work

Last Answer : (B) Efficiency of an Otto engine is higher than that of a diesel engine for the same compression ratio

During the constant rate period of drying of a solid, (A) Increased air humidity decreases the rate of drying (B) Increasing the air temperature decreases the drying rate (C) Surface evaporation of unbound moisture occurs (D) None of these

Description : During the constant rate period of drying of a solid, (A) Increased air humidity decreases the rate of drying (B) Increasing the air temperature decreases the drying rate (C) Surface evaporation of unbound moisture occurs (D) None of these

Last Answer : (C) Surface evaporation of unbound moisture occurs

Dew point of a gas-vapour mixture (A) Increases with temperature rise (B) Decreases with temperature rise (C) Decreases with decrease in pressure (D) Increases with increase in pressure

Description : Dew point of a gas-vapour mixture (A) Increases with temperature rise (B) Decreases with temperature rise (C) Decreases with decrease in pressure (D) Increases with increase in pressure

Last Answer : (C) Decreases with decrease in pressure

Thermal conductivities of most of the liquids __________ with rise in temperature.(A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Description : With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Last Answer : (A) Diffusivity of solute increases

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness (C) The emissivity of a polished surface is quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Description : Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness ... quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Last Answer : (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

. Pick out the wrong statement. (A) The eddy viscosity is a function of(B) The eddy viscosity is a fluid property(C) The viscosity of gas increases with increase in temperature(D) The viscosity of a liquid increases with decrease in temperature the type of turbulence involved

Description : . Pick out the wrong statement. (A) The eddy viscosity is a function of the type of turbulence involved (B) The eddy viscosity is a fluid property (C) The viscosity of gas increases with increase in temperature (D) The viscosity of a liquid increases with decrease in temperature

Last Answer : (B) The eddy viscosity is a fluid property

Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction (C) The equilibrium constant of a reaction depends upon temperature only (D) The conversion for a gas phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Description : Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With ... phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Last Answer : (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction

Pick out the correct statement pertaining to the flow through a converging-diverging tube. (A) The value of Mach number is always unity at the throat (B) No shock wave develops in the tube when the Mach number at exit is greater than unity (C) Throughout the converging portion of the tube, the density increases in the downstream direction (D) None of these

Description : Pick out the correct statement pertaining to the flow through a converging-diverging tube. (A) The value of Mach number is always unity at the throat (B) No shock wave develops in the tube ... the converging portion of the tube, the density increases in the downstream direction (D) None of these

Last Answer : (B) No shock wave develops in the tube when the Mach number at exit is greater than unity

With increase in temperature, the rate of extraction in leaching (solid￾liquid extraction system). (A) Increases (B) Decreases (C) Remain unaffected (D) Increases Linearly

Description : With increase in temperature, the rate of extraction in leaching (solid￾liquid extraction system). (A) Increases (B) Decreases (C) Remain unaffected (D) Increases Linearly

Last Answer : (A) Increases

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Description : The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Last Answer : (C) T

Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow (C) Generally, the diameter of the agitator is kept between l/3rd to l/6th of the tank diameter while the blade length is l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Description : Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with ... l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Last Answer : (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow

Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations. (A) Sherwood number in mass transfer is analogous to Nusselt number in heat transfer (B) Prandtl number in heat transfer is analogous to Schmidt number in mass transfer (C) Reynolds number in mass transfer is analogous to Grashoff number in heat transfer (D) Reynolds number remains the same in both heat and mass transfer

Description : Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations. (A) Sherwood number in mass transfer is analogous to Nusselt number in heat transfer ... heat transfer (D) Reynolds number remains the same in both heat and mass transfer

Last Answer : (C) Reynolds number in mass transfer is analogous to Grashoff number in heat transfer

Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian fluid velocity in a circular pipe flow is maximum at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Description : Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian ... at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Last Answer : (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5

Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Description : Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of ... one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Last Answer : (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor

Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the metals except noble metals (C) Yellow color of impure nitric acid is because of dissolved oxides of nitrogen (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Description : Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the ... (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Last Answer : (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process