During drying of a solid, the critical moisture content increases with (A) Decreased drying rate (B) Increased thickness of the solid (C) Increased drying rate (D) Both (B) and (C)

During drying of a solid, the critical moisture content increases with
(A) Decreased drying rate
(B) Increased thickness of the solid
(C) Increased drying rate
(D) Both (B) and (C)
by

1 Answer

Answer :

(D) Both (B) and (C)
by

Related questions

Pick out the correct statement. (A) Bound moisture is removed during constant rate drying period (B) Free moisture is removed during falling rate drying period (C) The sum of free moisture and equilibrium moisture in a solid is called the critical moisture (D) The driving force for mass transfer in a wet solid is its free moisture content

Description : Pick out the correct statement. (A) Bound moisture is removed during constant rate drying period (B) Free moisture is removed during falling rate drying period (C) The sum of free moisture and ... (D) The driving force for mass transfer in a wet solid is its free moisture content

Last Answer : (D) The driving force for mass transfer in a wet solid is its free moisture content

The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Description : The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Last Answer : (C) T

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Description : It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The ... 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Last Answer : (C) 71 min

The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Description : The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Last Answer : (B) T

During the constant rate period of drying of a solid, (A) Increased air humidity decreases the rate of drying (B) Increasing the air temperature decreases the drying rate (C) Surface evaporation of unbound moisture occurs (D) None of these

Description : During the constant rate period of drying of a solid, (A) Increased air humidity decreases the rate of drying (B) Increasing the air temperature decreases the drying rate (C) Surface evaporation of unbound moisture occurs (D) None of these

Last Answer : (C) Surface evaporation of unbound moisture occurs

Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate. (A) Increases (B) Decreases (C) Does not affect

Description : Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate. (A) Increases (B) Decreases (C) Does not affect

Last Answer : (B) Decreases

The critical moisture content in case of drying indicates the __________ rate period. (A) Beginning of falling (B) Beginning of constant (C) End of falling (D) None of these

Description : The critical moisture content in case of drying indicates the __________ rate period. (A) Beginning of falling (B) Beginning of constant (C) End of falling (D) None of these

Last Answer : (A) Beginning of falling

Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases

Last Answer : (D) Decreases as the moisture content of flakes increases

For __________ drying, the effects of velocity, temperature and humidity of the gas and the thickness of the solid are the same. (A) Unsaturated surface (B) Constant rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For __________ drying, the effects of velocity, temperature and humidity of the gas and the thickness of the solid are the same. (A) Unsaturated surface (B) Constant rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

In the constant rate period of the rate of drying curve for batch drying, (A) Cracks develop on the surface of the solid (B) Rate of drying decreases abruptly (C) Surface evaporation of unbound moisture occurs (D) None of these

Description : In the constant rate period of the rate of drying curve for batch drying, (A) Cracks develop on the surface of the solid (B) Rate of drying decreases abruptly (C) Surface evaporation of unbound moisture occurs (D) None of these

Last Answer : (C) Surface evaporation of unbound moisture occurs

During drying operation, it is easier to remove the __________ moisture. (A) Equilibrium (B) Critical (C) Unbound (D) Bound

Description : During drying operation, it is easier to remove the __________ moisture. (A) Equilibrium (B) Critical (C) Unbound (D) Bound

Last Answer : (C) Unbound

With increase in the mass velocity of the gas, the rate of drying during the constant rate period __________, if the conduction and radiation through the solid are negligible. (A) Increases (B) Decreases (C) Remain same

Description : With increase in the mass velocity of the gas, the rate of drying during the constant rate period __________, if the conduction and radiation through the solid are negligible. (A) Increases (B) Decreases (C) Remain same

Last Answer : (A) Increases

Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Description : Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Last Answer : (B) Reduce drying temperature

Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Description : Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The practical limit of moisture content achieved in air drying of timber is (A) 5 % (B) 15 % (C) 25 % (D) 35

Description : The practical limit of moisture content achieved in air drying of timber is (A) 5 % (B) 15 % (C) 25 % (D) 35 %

Last Answer : Answer: Option B

Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Description : Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Last Answer : (A) Unbound

To ensure uniform pressure distribution, the thickness of the foundation, isA) Kept uniform throughout (B) Increased gradually towards the edge (C) Decreased gradually towards the edge (D) Kept zero at the edge

Description : To ensure uniform pressure distribution, the thickness of the foundation, is A) Kept uniform throughout (B) Increased gradually towards the edge (C) Decreased gradually towards the edge (D) Kept zero at the edge

Last Answer : Answer: Option C

In reference with antireflection coating which of the following statement is true? A. Thickness of the film should be changed for light of same wavelength but different intensity B. Thickness of the film need not be changed for light of same wavelength but different intensity C. Thickness of the film should be increased for light of same wavelength but higher intensity D. Thickness of the film should be decreased for light of same wavelength but higher intensity

Description : In reference with antireflection coating which of the following statement is true? A. Thickness of the film should be changed for light of same wavelength but different intensity B. Thickness of ... D. Thickness of the film should be decreased for light of same wavelength but higher intensity

Last Answer : B. Thickness of the film need not be changed for light of same wavelength but different intensity

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Has there been a steady decrease in the height of Greenland in the 20th Century? (a) Yes. (b) No. (c) The height has increased and decreased due to changing wind patterns. (d) Yes, because of dramatic increases in the calving rate of glacial ice into the surrounding ocean.

Description : Has there been a steady decrease in the height of Greenland in the 20th Century? (a) Yes. (b) No. (c) The height has increased and decreased due to changing wind patterns. (d) Yes, because of dramatic increases in the calving rate of glacial ice into the surrounding ocean.

Last Answer : (b) No

With increase in moisture content of coal, its (A) Calorific value increases sometimes (B) Bulk density always decreases (C) Clinkering tendency during combustion increases (D) None of these

Description : With increase in moisture content of coal, its (A) Calorific value increases sometimes (B) Bulk density always decreases (C) Clinkering tendency during combustion increases (D) None of these

Last Answer : (D) None of these

With increase in moisture content of coal, its (A) Calorific value increases (B) Caking properties diminish (C) Swelling during carbonisation becomes excessive (D) None of these

Description : With increase in moisture content of coal, its (A) Calorific value increases (B) Caking properties diminish (C) Swelling during carbonisation becomes excessive (D) None of these

Last Answer : (B) Caking properties diminish

The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Description : The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Last Answer : (B) Increasing temperatures both on the surface and within the solid

In case of a vertical tube evaporator, with increase in the liquor level, the (A) Capacity of the evaporator is decreased (B) Capacity of the evaporator is increased (C) True temperature drop increases (D) Both (B) and (C)

Description : In case of a vertical tube evaporator, with increase in the liquor level, the (A) Capacity of the evaporator is decreased (B) Capacity of the evaporator is increased (C) True temperature drop increases (D) Both (B) and (C)

Last Answer : (A) Capacity of the evaporator is decreased

__________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning

Description : __________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning

Last Answer : (C) Strain ageing

Which of the following statements are true of the multiple organ dysfunction syndrome (MODS)? A. The “two-hit” model proposes that secondary MODS may be produced when even a relatively minor second insult reactivates, in a more amplified form, the systemic inflammatory response that was primed by an initial insult to the host. B. The systemic inflammatory response syndrome (SIRS), shock due to sepsis or SIRS, and MODS may be regarded as a continuum of illness severity. C. Prolonged stimulation or activation of Kupffer cells in the liver is thought to be a critical factor in the sustained, uncontrolled release of inflammatory mediators. D. The incidence of MODS in intensive care units has decreased owing to increased awareness, prevention, and treatment of the syndrome.

Description : Which of the following statements are true of the multiple organ dysfunction syndrome (MODS)? A. The two-hit model proposes that secondary MODS may be produced when even a relatively ... intensive care units has decreased owing to increased awareness, prevention, and treatment of the syndrome.

Last Answer : Answer: ABC DISCUSSION: MODS is part of a clinical continuum that begins with the systemic inflammatory response syndrome, which is the host's stress response to any major insult such ... pathogenesis of MODS, the incidence of MODS continues to increase without a significant improvement in outcome

If moisture content of solid on dry basis is X, then the same on wet basis is (A) X/(X + 1) (B) X/(1 - X) (C) (1 + X)/X (D) (1 - X)/X

Description : If moisture content of solid on dry basis is X, then the same on wet basis is (A) X/(X + 1) (B) X/(1 - X) (C) (1 + X)/X (D) (1 - X)/X

Last Answer : (A) X/(X + 1)

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Description : A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Last Answer : (D) Temperature of the solid

Which of the following statements is true concerning a stepdown transformer in an operating AC power circuit? A. Voltage and current will both be increased. B. Voltage and current will both be decreased C. Voltage decreases as current increases. D. Voltage increases as current decreases.

Description : Which of the following statements is true concerning a stepdown transformer in an operating AC power circuit? A. Voltage and current will both be increased. B. Voltage and current will both be decreased C. Voltage decreases as current increases. D. Voltage increases as current decreases.

Last Answer : Answer: C

Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. Compressed air should be blown over areas where dust is deposited. C. Spraying a solvent periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Description : Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. ... periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Last Answer : Answer: D

As the equilibrium moisture content of the coal increases, its (A) Calorific value increases (B) Swelling number decreases (C) Swelling number increases (D) Bulk density decreases

Description : As the equilibrium moisture content of the coal increases, its (A) Calorific value increases (B) Swelling number decreases (C) Swelling number increases (D) Bulk density decreases

Last Answer : (B) Swelling number decreases

Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases

Description : Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases

Last Answer : (A) Volatile matter content increases

Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C) With increase in oxygen content, moisture holding capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C ... capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Mechanism of moisture removal in case of freeze drying of food stuff is by (A) Evaporation (B) Sublimation (C) Dehydration (D) Adsorption

Description : Mechanism of moisture removal in case of freeze drying of food stuff is by (A) Evaporation (B) Sublimation (C) Dehydration (D) Adsorption

Last Answer : (B) Sublimation

Which of the following combination of processing and preservation techniques works best for smoked products? A. Salt and acidification B. Heat, salt, dipping in brine/ minimal moisture content C. Heat, salt, acidification/minimal moisture content D. Heat and solid content

Description : Which of the following combination of processing and preservation techniques works best for smoked products? A. Salt and acidification B. Heat, salt, dipping in brine/ minimal moisture content C. Heat, salt, acidification/minimal moisture content D. Heat and solid content

Last Answer : B. Heat, salt, dipping in brine/ minimal moisture content

How do you describe the relationship between moisture content and microbial activity as the soil is gradually increased from this dry state to a saturated one What factors dictate the shape of the cur?

Description : How do you describe the relationship between moisture content and microbial activity as the soil is gradually increased from this dry state to a saturated one What factors dictate the shape of the cur?

Last Answer : Need answer

In the neurones: a. the axons convey impulse away from the cell body b. neurotransmitters are synthesized in the cell bodies and then transported to the axons c. the condition velocity increases with fibre diameter d. the excitability is increased if the extracellular calcium concentration is decreased

Description : In the neurones: a. the axons convey impulse away from the cell body b. neurotransmitters are synthesized in the cell bodies and then transported to the axons c. the condition ... with fibre diameter d. the excitability is increased if the extracellular calcium concentration is decreased

Last Answer : the axons convey impulse away from the cell body

Pick up the incorrect statement from the following. If water cement ratio is (A) Increased, strength of concrete increases (B) Decreased, strength of concrete increases(D) None of these (C) Increased, strength of concrete is not affected

Description : Pick up the incorrect statement from the following. If water cement ratio is (A) Increased, strength of concrete increases (B) Decreased, strength of concrete increases (C) Increased, strength of concrete is not affected (D) None of these

Last Answer : Answer: Option C

The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.

Description : The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.

Last Answer : c. MTBF is raised.

Drying of a solid involves __________ transfer. (A) Only heat (B) Only mass (C) Both heat and mass (D) None of these

Description : Drying of a solid involves __________ transfer. (A) Only heat (B) Only mass (C) Both heat and mass (D) None of these

Last Answer : (C) Both heat and mass

It has been suggested that enterocyte-specific fuels be utilized for all patients receiving parenteral nutrition. Theoretically, the benefits of such fuels include: A. Glutamine increases gut mucosal protein content and wall thickness. B. Butyrate increases jejunal mucosal protein content and wall thickness. C. The short-chain fatty acids—butyrate, propionate, and acetate—are useful in supporting ileal mucosal protein content and thickness. D. The use of glutamine-enriched solutions for parenteral nutrition for patients with chemotherapy toxicity or radiation enteritis is without hazards.

Description : It has been suggested that enterocyte-specific fuels be utilized for all patients receiving parenteral nutrition. Theoretically, the benefits of such fuels include: A. Glutamine increases ... parenteral nutrition for patients with chemotherapy toxicity or radiation enteritis is without hazards.

Last Answer : Answer: NONE IS ENTIRELY TRUE DISCUSSION: The use of enterocyte-specific fuels is part of a new and potentially exciting phase of nutritional pharmacology in parenteral nutrition; ... the maintenance of colonocyte-specific nutrition and, in the case of butyrate, ileal enterocyte nutrition

Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Description : Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Last Answer : (B) Use of increased tray spacing

According to principle of diminishing marginal rate of substitution a. One commodity must be decreased while other is increased b. Commodity which is increased has higher marginal significance c. Commodity which is decreased has higher marginal significance. Of these statemenls: A.Only a is correct B.Both a and b are correct C.Both a and c are correct D.All are correct

Description : According to principle of diminishing marginal rate of substitution a. One commodity must be decreased while other is increased b. Commodity which is increased has higher marginal significance c. Commodity which is decreased ... .Both a and b are correct C.Both a and c are correct D.All are correct

Last Answer : C.Both a and c are correct