Description : Solvent extracted oil (A) Has low free fatty acid content (B) Is odourless (C) Has more of unsaturates (D) None of these
Last Answer : (D) None of these
Description : The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (D) Neither (A) nor (B)
Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)
Description : Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)
Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases
Last Answer : (D) Decreases as the moisture content of flakes increases
Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B
Description : In case of constant underflow extraction operation, the __________ atall solute concentration. (A) Solids are drained to the same extent (B) Ratio of the insoluble to solution is constant (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : __________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay
Last Answer : (B) Solvent extraction
Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide
Last Answer : (A) Propane & phenol-cresol mixture
Description : Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : Refractive index of a petrofuel which is the ratio of velocity of light in air to its velocity in the petrofuel gives an indication if its (A) Molecular weight (B) Aromatics content (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b’
Last Answer : (C) Both ‘a’ & ‘b
Description : With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these
Last Answer : (A) Hexane
Description : Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C
Last Answer : (D) Both (B) & (C
Description : Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater ... (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these
Last Answer : (B) Employs two solvents
Description : In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low
Last Answer : (B) No separation will occur
Description : Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption
Last Answer : (A) Solvent extraction
Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'
Last Answer : (D) All 'a', 'b' & 'c'
Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent
Last Answer : (D) One of the liquid components has very high affinity towards the solvent
Description : Perforated plate towers are unique for solvent extraction because, they provide (A) Higher contact area (B) Better contact of the phase (C) Repeated coalescence & redispersion of the drop phase (D) None of these
Last Answer : (C) Repeated coalescence & redispersion of the drop phase
Description : The following are electronic record a) Record which is printed on a paper. b) Record which is stored , recorded, or copied in optical or magnetic media produced by computer c) Both A & B d) Neither A nor B
Last Answer : c) Both A & B
Description : Use of natural draft cooling tower is practised, when the air has low (A) Humidity (B) Temperature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'
Last Answer : (C) Both 'a' & 'b
Description : The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Saponification value/number of an oil or fat is a measure of its (A) Fatty acid content (B) Degree of unsaturation of the fatty acids present in it (C) Average molecular weight (D) Insoluble fatty acid content
Last Answer : (C) Average molecular weight
Description : The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'
Last Answer : (A) Carbon
Description : If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (B) Temperature
Description : In any spontaneous process, the __________ free energy decreases. (A) Helmholtz (B) Gibbs (C) Both ‘a’ & ‘b’ (D) Neither 'a' nor 'b'
Last Answer : (C) Both ‘a’ & ‘b’
Description : In a liquid-liquid extraction, 10 kg of a solution containing 2 kg of solute C and 8 kg of solvent A is brought into contact with 10 kg of solvent B. Solvent A and B are completely immiscible in each other whereas ... (C) Less than 1 kg of C is transferred to B (D) No amount of C is transferred to B
Last Answer : (A) The entire amount of C is transferred to solvent B
Description : Semi steel' is (A) Produced by adding 10-20% steel to the cupola charge (B) Stronger than cast iron (C) Both (A) and (B) (D) Neither (A) nor (B)
Description : Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)
Description : Sulphur in metallurgical coal (A) Contributes to its heating value (B) Affects the quality of steel produced as cracks develop on the surface while rolling the steel (C) Both (A) and (B) (D) Neither (A) nor (B)
Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity
Last Answer : B) High thermal conductivity
Description : Electrical desalting of crude oil removes the __________ impurities. (A) Oleophilic (B) Oleophobic (C) Both (A) and (B) (D) Neither (A) nor (B
Last Answer : (B) Oleophobic
Description : Increase in water content in a cement concrete (i) Increases workability (ii) Increases the strength [ A ] i [ B ] ii [ C ] both (i) and (ii) [ D ] neither (i) nor (ii)
Last Answer : [ A ] i
Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)
Last Answer : (C) Aqueous solution (10% water) of diethylene glycol
Description : Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock
Last Answer : (B) Lubricating oils
Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same
Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components
Description : Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used ... in solvent extraction is unity at the plait point (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Selectivity of the solvent used in solvent extraction should be (A) 1 (B) > 1 (C) < 1 (D) 0
Last Answer : (B) > 1
Description : Degree of freedom for leaching and solvent extraction process is (A) 0 (B) 1 (C) 2 (D) 3
Last Answer : (D) 3
Description : In which of the following unit operations, the selectivity is an important parameter? (A) Distillation (B) Solvent extraction (C) Absorption (D) None of these
Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation
Last Answer : (C) Its recovery cost by distillation may be prohibitively high
Description : Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the ... extraction achieved in the unit is (A) 25% (B) 50% (C) 70% (D) 90%
Last Answer : (B) 50%
Description : Separation of the isotopes of helium for scientific investigations is done by (A) Reverse osmosis (B) Thermal diffusion (C) Leaching (D) Solvent extraction
Last Answer : (B) Thermal diffusion
Description : A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation
Last Answer : (B) Extractive distillation
Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux
Last Answer : (D) The capacity of a distillation column is maximum at total reflux
Description : The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide
Last Answer : (D) Carbon dioxide
Description : In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate ... phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25
Last Answer : (B) 8.89