Ringelmann chart is used for the measurement of the (A) Combustibles present in automobile exhaust (B) Smoke density from a chimney (C) Exhaust gas density (D) Flue gas temperature

Ringelmann chart is used for the measurement of the
(A) Combustibles present in automobile exhaust
(B) Smoke density from a chimney
(C) Exhaust gas density
(D) Flue gas temperature
by

1 Answer

Answer :

(B) Smoke density from a chimney
by

Related questions

Ringelmann chart No. 2 corresponds to __________ percent black smoke. (A) 10 (B) 20 (C) 40 (D) 80

Description : Ringelmann chart No. 2 corresponds to __________ percent black smoke. (A) 10 (B) 20 (C) 40 (D) 80

Last Answer : (C) 40

Peroxyacetyl nitrate (PAN), a pollutant is found in the (A) Automobile exhaust (B) Flue gas of coal based power plant (C) Exhaust of nitric acid plant (D) Exhaust of sulphuric acid plant

Description : Peroxyacetyl nitrate (PAN), a pollutant is found in the (A) Automobile exhaust (B) Flue gas of coal based power plant (C) Exhaust of nitric acid plant (D) Exhaust of sulphuric acid plant

Last Answer : (A) Automobile exhaust

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

Ringelmann chart is used for the evaluation of __________ pollution. (A) Air (B) Water (C) Noise (D) Radioactive

Description : Ringelmann chart is used for the evaluation of __________ pollution. (A) Air (B) Water (C) Noise (D) Radioactive

Last Answer : (A) Air

Flue gas outlet temperature from the chimney of any furnace should be ideally about __________ °C. (A) 50 (B) 100 (C) 150

Description : Flue gas outlet temperature from the chimney of any furnace should be ideally about __________ °C. (A) 50 (B) 100 (C) 150

Last Answer : (C) 150

Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat of the substance): 0.20 kCal/kg oC DT (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Last Answer : 21600

Higher efficiency in the combustion of solid fuel cannot be achieved by (A) Proper fuel preparation (B) Keeping the flue gas exhaust temperature very high (C) Adopting efficient-fuel firing technique & equipment (D) Supplying correct quantity of combustion air

Description : Higher efficiency in the combustion of solid fuel cannot be achieved by (A) Proper fuel preparation (B) Keeping the flue gas exhaust temperature very high (C) Adopting efficient-fuel firing technique & equipment (D) Supplying correct quantity of combustion air

Last Answer : (B) Keeping the flue gas exhaust temperature very high

The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Description : The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Last Answer : A]Increase thermal efficiency of boiler

Sulphur dioxide present in the industrial chimney exhaust gases causes (A) Respiratory & lung disease (B) Reduction in plant's productivity owing to acid rain (C) Corrosion of building materials (D) All (A), (B) and (C)

Description : Sulphur dioxide present in the industrial chimney exhaust gases causes (A) Respiratory & lung disease (B) Reduction in plant's productivity owing to acid rain (C) Corrosion of building materials (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Flue gas discharge velocity through chimney of a big thermal power plant may be around __________ m/sec. (A) 0.5 (B) 10 (C) 50 (D) 500

Description : Flue gas discharge velocity through chimney of a big thermal power plant may be around __________ m/sec. (A) 0.5 (B) 10 (C) 50 (D) 500

Last Answer : (B) 10

White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Description : White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Last Answer : (B) Coke oven gas

Furnace aerodynamics is related to the __________ in the furnace. (A) Movement of gases (B) Measurement of flue gas volume (C) Temperature control

Description : Furnace aerodynamics is related to the __________ in the furnace. (A) Movement of gases (B) Measurement of flue gas volume (C) Temperature control

Last Answer : (A) Movement of gases

Incomplete combustion of a fuel is characterised by the high __________ in the flue gas. (A) Smoke (B) Temperature (C) Oxygen (D) Carbon monoxide

Description : Incomplete combustion of a fuel is characterised by the high __________ in the flue gas. (A) Smoke (B) Temperature (C) Oxygen (D) Carbon monoxide

Last Answer : (D) Carbon monoxide

Main pollutant present in automobile exhaust is (A) CO (B) CO2 (C) NO (D) Hydrocarbons

Description : Main pollutant present in automobile exhaust is (A) CO (B) CO2 (C) NO (D) Hydrocarbons

Last Answer : (A) CO

Inhalation of lead compounds present in automobile exhaust (using leaded petrol) causes (A) Blood poisoning (B) Anaemia (C) Nervous system disorder (D) All (A), (B) & (C)

Description : Inhalation of lead compounds present in automobile exhaust (using leaded petrol) causes (A) Blood poisoning (B) Anaemia (C) Nervous system disorder (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and can absorb both ultraviolet & visible light (C) Hydrocarbon pollutants are produced by sweet gum, oak & natural rubber trees (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Description : Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and ... at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Last Answer : (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Flue gases coming out from furnace is first going through a) Turbine b) Economizer c) Air pre-heater d) Chimney

Description : Flue gases coming out from furnace is first going through a) Turbine b) Economizer c) Air pre-heater d) Chimney

Last Answer : Ans: Economizer

Automobile exhaust gas that causes major respiratory problem is

Description : Automobile exhaust gas that causes major respiratory problem is

Last Answer : Automobile exhaust gas that causes major respiratory problem is A. CO B. `CH_(4)` C. `NO_(2)` D. Chlorine.

During which of the following operating conditions of an automobile, carbon monoxide content in the exhaust gas is maximum? (A) Idle running (B) Acceleration (C) Cruising (D) Deceleration

Description : During which of the following operating conditions of an automobile, carbon monoxide content in the exhaust gas is maximum? (A) Idle running (B) Acceleration (C) Cruising (D) Deceleration

Last Answer : (A) Idle running

Automobile exhaust gas that causes major respiratory problem is a) CO b) CH4 C) NO2 d) Chlorine.

Description : Automobile exhaust gas that causes major respiratory problem is a) CO b) CH4 C) NO2 d) Chlorine.

Last Answer : a) CO 

During which of the following operating conditions of an automobile, carbon monoxide content in exhaust gas is maximum? (1) Acceleration (2) Cruising (3) Idle running (4) Deacceleration

Description : During which of the following operating conditions of an automobile, carbon monoxide content in exhaust gas is maximum? (1) Acceleration (2) Cruising (3) Idle running (4) Deacceleration

Last Answer : Idle running

Which of the following sources is responsible for maximum air pollution? (A) Industrial chimney exhaust (B) Forest fire (C) Automobiles exhaust (D) Photochemical oxidation of organic matter

Description : Which of the following sources is responsible for maximum air pollution? (A) Industrial chimney exhaust (B) Forest fire (C) Automobiles exhaust (D) Photochemical oxidation of organic matter

Last Answer : (C) Automobiles exhaust

Safe limit' called Threshold Limit Value (TLV) of carbon monoxide in atmospheric air is < 50 ppm. The main source of carbon monoxide pollutant in air is the (A) Industrial chimney exhaust (B) Automobiles exhaust (C) Photochemical reaction in polluted atmosphere (D) Burning of domestic fuel

Description : Safe limit' called Threshold Limit Value (TLV) of carbon monoxide in atmospheric air is < 50 ppm. The main source of carbon monoxide pollutant in air is the (A) Industrial chimney exhaust (B) Automobiles exhaust (C) Photochemical reaction in polluted atmosphere (D) Burning of domestic fuel

Last Answer : (B) Automobiles exhaust

A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6.26, CO : 1.56, O2 : 3.91, H2O :15.66, N2 : 72.60 (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02 (C) CO2 : 6.39, CO : 1.60, O2 : 3.99, H2O:25.96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Description : A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6 ... 96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Last Answer : (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02

Which of the following combustibles is absent in blast furnace gas?(A) H2 (B) CH4 (C) CO (D) None of these

Description : Which of the following combustibles is absent in blast furnace gas? (A) H2 (B) CH4 (C) CO (D) None of these

Last Answer : (B) CH4

measures oxygen and temperature of the flue gas. a) Fuel efficiency monitor. b) Combustion analyzer. c) Contact thermometer. d) Infrared thermometer.

Description : measures oxygen and temperature of the flue gas. a) Fuel efficiency monitor. b) Combustion analyzer. c) Contact thermometer. d) Infrared thermometer.

Last Answer : Combustion analyzer

23. Infrared thermometer is used to measure a) Surface temperature b) Flame temperature c) Flue gas temperature d) Hot water temperature

Description : Infrared thermometer is used to measure a) Surface temperature b) Flame temperature c) Flue gas temperature d) Hot water temperature

Last Answer : Surface temperature

16. Infrared thermometer is used to measure a) Surface temperature b) Flame temperature c) Flue gas temperature d) Hot water temperature

Description : Infrared thermometer is used to measure a) Surface temperature b) Flame temperature c) Flue gas temperature d) Hot water temperature

Last Answer : Surface temperature

Heat recovery equipment will be most effective when the temperature of flue gas is: a) 250oC b) 200 oC c)400 oC d) 280 oC

Description : Heat recovery equipment will be most effective when the temperature of flue gas is: a) 250oC b) 200 oC c)400 oC d) 280 oC

Last Answer : 400 oC

To convert volumetric analysis to gravimetric analysis, the relative volume of each constituent of the flue gases is  (a) divided by its molecular weight  (b) multiplied by its molecular weight  (c) multiplied by its density  (d) multiplied by its specific weight  (e) divided by its specific weight.

Description : To convert volumetric analysis to gravimetric analysis, the relative volume of each constituent of the flue gases is  (a) divided by its molecular weight  (b) multiplied by its molecular weight  (c) ... by its density  (d) multiplied by its specific weight  (e) divided by its specific weight.

Last Answer : Answer : b

What is the major visible constituent of the exhaust plume from a natural gas-fired power plant? w) carbon dioxide x) carbon monoxide y) smoke z) water

Description : What is the major visible constituent of the exhaust plume from a natural gas-fired power plant? w) carbon dioxide x) carbon monoxide y) smoke z) water 

Last Answer : ANSWER: Z -- WATER 

Why is it that nearly every automobile that has the exhaust on the right side has the fuel delivery on the left side, and vice versa?

Description : Why is it that nearly every automobile that has the exhaust on the right side has the fuel delivery on the left side, and vice versa?

Last Answer : As exhausts produce heat they usually want to keep em as far away from the fuel tanks as possible :-)

The most hazardous metal pollutant of automobile exhaust is

Description : The most hazardous metal pollutant of automobile exhaust is

Last Answer : The most hazardous metal pollutant of automobile exhaust is A. Cadmium B. Lead C. Mercury D. Copper

The constituents of automobile exhaust that can cause cancer is/are : (1) Oxides of nitrogen (2) Carbon monoxide (3) Polycyclic hydrocarbons (4) Lead

Description : The constituents of automobile exhaust that can cause cancer is/are : (1) Oxides of nitrogen (2) Carbon monoxide (3) Polycyclic hydrocarbons (4) Lead

Last Answer : (2) Carbon monoxide Explanation: Lead is a naturally occuriing bluish-gray metal found in small amounts in the earth's crust. In the past, when lead was added to gasoline, breathing automobile ... found to be carcinogen. A substance that causes cancer or helps cancer grow is called a carcinogen.

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is a manmade source of air pollution? (A) Automobile exhaust (B) Forest fire (C) Bacterial action in soil and swamp areas (D) All (A), (B) and (C)

Description : Which of the following is a manmade source of air pollution? (A) Automobile exhaust (B) Forest fire (C) Bacterial action in soil and swamp areas (D) All (A), (B) and (C)

Last Answer : (A) Automobile exhaust

Photochemical smog is formed from automobile exhaust (A) By reaction of hydrocarbon & nitric oxide in presence of sunlight (B) Appears only on sunny days (C) Is harmful for crops and trees also besides causing eye irritation & asthma (D) All (A), (B) & (C)

Description : Photochemical smog is formed from automobile exhaust (A) By reaction of hydrocarbon & nitric oxide in presence of sunlight (B) Appears only on sunny days (C) Is harmful for crops and trees also besides causing eye irritation & asthma (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

The heat exhaust of an automobile with an internal combustion engine represents approximately what percent of the energy of the original fuel? w) 10 % x) 50 % y) 35 % z) 5 %

Description : The heat exhaust of an automobile with an internal combustion engine represents approximately what percent of the energy of the original fuel? w) 10 % x) 50 % y) 35 % z) 5 % 

Last Answer : ANSWER: Y -- 35 % 

Which of the following in automobile exhaust can cause cancer? (1) Oxides of nitrogen (2) Carbon monoxide (3) Lead (4) Polyclinic hydrocarbons

Description : Which of the following in automobile exhaust can cause cancer? (1) Oxides of nitrogen (2) Carbon monoxide (3) Lead (4) Polyclinic hydrocarbons

Last Answer : Polyclinic hydrocarbons

The constituents of automobile exhaust that can cause cancer is/are : (1) Oxides of nitrogen (2) Carbon monoxide (3) Polycyclic hydrocarbons (4) Lead

Description : The constituents of automobile exhaust that can cause cancer is/are : (1) Oxides of nitrogen (2) Carbon monoxide (3) Polycyclic hydrocarbons (4) Lead

Last Answer : Lead

C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Description : C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Last Answer : (D) May increase or decrease, depends on combustibles

Emission of dense white smoke out of the chimney of a thermal power plant is an indication of the use of (A) Less air for combustion (B) Correct amount of air for combustion (C) Too much air for combustion (D) Pulverised coal in boilers

Description : Emission of dense white smoke out of the chimney of a thermal power plant is an indication of the use of (A) Less air for combustion (B) Correct amount of air for combustion (C) Too much air for combustion (D) Pulverised coal in boilers

Last Answer : (C) Too much air for combustion

White smoke coming out of the chimney of a furnace indicates the useof(A) Low excess air(B) Very high excess air(C) Gaseous fuel in the furnace(D) Liquid fuel in the furnace

Description : White smoke coming out of the chimney of a furnace indicates the useof (A) Low excess air (B) Very high excess air (C) Gaseous fuel in the furnace (D) Liquid fuel in the furnace

Last Answer : (B) Very high excess air

Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace. (A) Low amount of excess combustion air (B) Large quantity of excess combustion air(C) Hydrocarbon fuel(D) Pulverised coal as fuel

Description : Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace. (A) Low amount of excess combustion air (B) Large quantity of excess combustion air (C) Hydrocarbon fuel (D) Pulverised coal as fuel

Last Answer : (A) Low amount of excess combustion air

Which instrument is used to monitor O2, CO in flue gas? (EA) a) Combustion analyser b) Power analyser c) Pyrometer d) Fyrite

Description : Which instrument is used to monitor O2, CO in flue gas? (EA) a) Combustion analyser b) Power analyser c) Pyrometer d) Fyrite

Last Answer : Combustion analyser

instrument is used to monitor O2, CO in flue gas (EA) a) Combustion analyzer b) Power analyzer c) Pyrometer d) Fyrite

Description : instrument is used to monitor O2, CO in flue gas (EA) a) Combustion analyzer b) Power analyzer c) Pyrometer d) Fyrite

Last Answer : Combustion analyzer

Which instrument is used to monitor O2, CO in flue gas? c)Combustion analyzer c) Pyrometer d)Power analyzer d) Fyrite

Description : Which instrument is used to monitor O2, CO in flue gas? c)Combustion analyzer c) Pyrometer d)Power analyzer d) Fyrite

Last Answer : Combustion analyzer

115. Which instrument is used to monitor O2, CO in flue gas? a) Combustion analyzer c) Pyrometer b) Power analyzer d) Fyrite

Description : 115. Which instrument is used to monitor O2, CO in flue gas? a) Combustion analyzer c) Pyrometer b) Power analyzer d) Fyrite

Last Answer : Combustion analyzer