In Groundnut pegging stage comes after — DAS a. 35 b. 45 c. 55 d. 65

In Groundnut pegging stage comes after — DAS
a. 35
b. 45
c. 55
d. 65
by

1 Answer

Answer :

c. 55
by

Related questions

Pegging stage in groundnut comes after (a) 30 D.A.S. (b) 45 D.A.S. (c) 55 D.A.S. (d) 35 D.A.S.

Description : Pegging stage in groundnut comes after (a) 30 D.A.S. (b) 45 D.A.S. (c) 55 D.A.S. (d) 35 D.A.S.

Last Answer : (c) 55 D.A.S.

In erect groundnut variety drum rolling operation is carried out at — DAS. a. 30 to 45 b. 45 to 55 c. 55 to 60 d. After 60

Description : In erect groundnut variety drum rolling operation is carried out at — DAS. a. 30 to 45 b. 45 to 55 c. 55 to 60 d. After 60

Last Answer : c. 55 to 60

Which of the following pair of crop & critical growth stage for irrigation is not correctly matched ? a. Wheat – CRI b. Maize – Tasseling c. Gram – Flowering d. Groundnut – Pegging

Description : Which of the following pair of crop & critical growth stage for irrigation is not correctly matched ? a. Wheat – CRI b. Maize – Tasseling c. Gram – Flowering d. Groundnut – Pegging

Last Answer : c. Gram – Flowering

Intercultural operation in groundnut should be completed before — crop growth stage a. Flowering b. Pegging c. Branching d. Gap filling

Description : Intercultural operation in groundnut should be completed before — crop growth stage a. Flowering b. Pegging c. Branching d. Gap filling

Last Answer : a. Flowering

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °

Description : Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °

Last Answer : Ans - b. 42-45 °

Pegging up of a currency means, fixing the value of a currency - (1) at a constant level (2) at a lower level (3) at a higher level (4) leaving it to market forces

Description : Pegging up of a currency means, fixing the value of a currency - (1) at a constant level (2) at a lower level (3) at a higher level (4) leaving it to market forces

Last Answer : (1) at a constant level Explanation: Currency pegging is the idea of fixing the exchange rate of a currency by matching its value to the value of another single currency or to a basket of other ... the value of a currency, with respect to the .currency or the other valuable it is pegged to.

Pegging up of a currency means, fixing the value of a currency (1) at a constant level (2) at a lower level (3) at a higher level (4) leaving it to market forces

Description : Pegging up of a currency means, fixing the value of a currency (1) at a constant level (2) at a lower level (3) at a higher level (4) leaving it to market forces

Last Answer : at a constant level 

The normal concentration of vitamin A in blood in I.V/dl: (A) 20–55 (B) 24–60 (C) 30–65 (D) 35–70

Description : The normal concentration of vitamin A in blood in I.V/dl: (A) 20–55 (B) 24–60 (C) 30–65 (D) 35–70

Last Answer : Answer : B

The summarized balance sheet of Autolight Limited shows the balances of previous and current year of retained earnings Rs. 25,000 and Rs. 35,000. If dividend paid during the current year amounted to Rs. 5,000 then profit earned during the year will be: (a) Rs. 5,000 (b) Rs. 55,000 (c) Rs. 15,000 (d) Rs. 65,000

Description : The summarized balance sheet of Autolight Limited shows the balances of previous and current year of retained earnings Rs. 25,000 and Rs. 35,000. If dividend paid during the current year amounted to Rs. 5,000 then profit earned during ... (a) Rs. 5,000 (b) Rs. 55,000 (c) Rs. 15,000 (d) Rs. 65,000

Last Answer : (c) Rs. 15,000

Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Description : Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Last Answer : Answer: Option D

According to IS: 456, maximum water-cement ratio should be [ A ] 0.45 [ B ] 0.55 [ C ] 0.65 [ D ] 0.75

Description : According to IS: 456, maximum water-cement ratio should be [ A ] 0.45 [ B ] 0.55 [ C ] 0.65 [ D ] 0.75

Last Answer : [ B ] 0.55

According to IS: 456, maximum water-cement ratio should be [ A ] 0.45 [ B ] 0.55 [ C ] 0.65 [ D ] 0.75

Description : According to IS: 456, maximum water-cement ratio should be [ A ] 0.45 [ B ] 0.55 [ C ] 0.65 [ D ] 0.75

Last Answer : [ B ] 0.55

The summarized balance sheet of Rakesh udyog Limited shows the balances of previous and current year of provision for taxation Rs. 50,000 and Rs. 65,000. If taxed paid during the current year amounted to Rs. 70,000 then amount charge from Profit and Loss Account will be: (a) Rs. 55,000 (b) Rs. 85,000 (c) Rs. 45,000 (d) Rs. 1,85,000

Description : The summarized balance sheet of Rakesh udyog Limited shows the balances of previous and current year of provision for taxation Rs. 50,000 and Rs. 65,000. If taxed paid during the current year amounted to Rs. 70,000 then amount charge ... a) Rs. 55,000 (b) Rs. 85,000 (c) Rs. 45,000 (d) Rs. 1,85,000

Last Answer : (b) Rs. 85,000

In a batch, 40% of the students offered Maths, 30% offered science and 15% offered both. If a student is selected at random, what is the probability that they has offered science or maths? A) 0.55 B) 0.65 C) 0.45 D) 0.75

Description : In a batch, 40% of the students offered Maths, 30% offered science and 15% offered both. If a student is selected at random, what is the probability that they has offered science or maths? A) 0.55 B) 0.65 C) 0.45 D) 0.75

Last Answer : Answer: A) P(M) = 0.40 P(S) =0.30 and P(M∩S) = 0.15 P(M∪S) = P(M) + P(S) - P(M∩S) = 0.55

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

Out of 100 kcal/second of incident radiant energy on the surface of a thermally transparent body, 300 kcal/second is reflected back. If the transmissivity of the body is 0.25, the emissivity of the surface will be (A) 0.35 (B) 0.45 (C) 0.55 (D) 0.85

Description : Out of 100 kcal/second of incident radiant energy on the surface of a thermally transparent body, 300 kcal/second is reflected back. If the transmissivity of the body is 0.25, the emissivity of the surface will be (A) 0.35 (B) 0.45 (C) 0.55 (D) 0.85

Last Answer : (B) 0.45

The contribution of Agricultural sector to the gross domestic product (GDP) in India in the year 2004-05 has been nearly (A) 25 % (B) 45 % (C) 35 % (D) 55 %

Description : The contribution of Agricultural sector to the gross domestic product (GDP) in India in the year 2004-05 has been nearly (A) 25 % (B) 45 % (C) 35 % (D) 55 %

Last Answer : (A) 25 %

Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Last Answer : (B) 35 to 45

What is the maximum percent of energy recovered if the steam is condensed before reintroduced to system? a) 25 b) 35 c) 45 d) 55

Description : What is the maximum percent of energy recovered if the steam is condensed before reintroduced to system? a) 25 b) 35 c) 45 d) 55

Last Answer : 35

Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, 49, 50, 74, 75, 99,100 B. 10, 50, 75,100, 250, 1000 C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Description : Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, ... C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Last Answer : C. 0, 1,10,11, 50, 51, 75, 76,100,101

At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Description : At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Last Answer : a. 35-55 degree

Torch is kept at height from top surface of rail head? (i) 30 to 55 mm (ii) 35 to 40 mm (iii) 40 to 45 mm

Description : Torch is kept at height from top surface of rail head? (i) 30 to 55 mm (ii) 35 to 40 mm (iii) 40 to 45 mm

Last Answer : (iii) 40 to 45 mm

An industry employed 1200 men and 800 women and the average salary was Rs 51 per day. If a woman got Rs 10 less than a man , then what are their daily salary?(mens and women respectively) A) men Rs 25 and women Rs 35 B) men Rs 45 and women Rs 55 C) men Rs 35 and women Rs 25 D) men Rs 55 and women Rs 45

Description : An industry employed 1200 men and 800 women and the average salary was Rs 51 per day. If a woman got Rs 10 less than a man , then what are their daily salary?(mens and women respectively) A) men Rs 25 and women Rs ... Rs 45 and women Rs 55 C) men Rs 35 and women Rs 25 D) men Rs 55 and women Rs 45

Last Answer : D) Let the daily salary of man be Rs’x’ Then the daily salary of a women = Rs (x-100 Now 1200x + 800(x-10) = 51 *(1200+800) 1200x+800x -8000 = 51*2000 2000x = 102000+8000 =110000 X=55 Therefore mens daily salary Rs 55 and womens daily salary Rs 45

A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec

Description : A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec

Last Answer : ANS: D

Diesel used in naval applications has a minimum cetane number of (A) 25 (B) 35 (C) 45 (D) 65

Description : Diesel used in naval applications has a minimum cetane number of (A) 25 (B) 35 (C) 45 (D) 65

Last Answer : (C) 45

Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Last Answer : (B) 0.35 to 0.45

Sugarcane settees are dipped in hot water for two hours having -c temperature a. 50 b. 55 c. 45 d. 60

Description : Sugarcane settees are dipped in hot water for two hours having -c temperature a. 50 b. 55 c. 45 d. 60

Last Answer : a. 50

Sugarcane settees are dipped in hot water for two hours having -c temperature a. 50 b. 55 c. 45 d. 60

Description : Sugarcane settees are dipped in hot water for two hours having -c temperature a. 50 b. 55 c. 45 d. 60

Last Answer : a. 50

Isoproturon to wheat is effective at a). 15 DAS b). 25-30 DAS c). 45- DAS d). 5 DAS

Description : Isoproturon to wheat is effective at a). 15 DAS b). 25-30 DAS c). 45- DAS d). 5 DAS

Last Answer : b). 25-30 DAS

2,4-d to wheat is effective when it is ap plied at a). 15 DAS b). 20-25 DAS c). 25-30 DAS d). 45 DAS

Description : 2,4-d to wheat is effective when it is ap plied at a). 15 DAS b). 20-25 DAS c). 25-30 DAS d). 45 DAS

Last Answer : c). 25-30 DAS

In Wheat Crown root initiation stage comes —- days after sowing a. 21 b. 11 c. 31 d. 41

Description : In Wheat Crown root initiation stage comes —- days after sowing a. 21 b. 11 c. 31 d. 41

Last Answer : a. 21

The herbicides applied 30-40 DAS are comes under

Description : The herbicides applied 30-40 DAS are comes under

Last Answer : Ans.Post-emergence herbicides.

The upper limit of investment in plant and machinery for small-scale industries has been fixed currently at - (1) Rs. 35 lakhs (2) Rs. 45 lakhs (3) Rs. 60 lakhs (4) Rs. 1 crore

Description : The upper limit of investment in plant and machinery for small-scale industries has been fixed currently at - (1) Rs. 35 lakhs (2) Rs. 45 lakhs (3) Rs. 60 lakhs (4) Rs. 1 crore

Last Answer : (4) Rs. 1 crore Explanation: The upper limit of investment in plant and machinery for small-scale industries has been fixed at Rs. one crore.

Grade A eggs are of — gm. Weight ? a. 35 to 40 b. 40 to 45 c. 45 to 50 d. 50 to 53

Description : Grade A eggs are of — gm. Weight ? a. 35 to 40 b. 40 to 45 c. 45 to 50 d. 50 to 53

Last Answer : d. 50 to 53

The upper limit of investment in plant and machinery for smallscale industries has been fixed currently at (1) 35 lakhs (2) 45 lakhs (3) 60 lakhs (4) 1 crore

Description : The upper limit of investment in plant and machinery for smallscale industries has been fixed currently at (1) 35 lakhs (2) 45 lakhs (3) 60 lakhs (4) 1 crore

Last Answer : 1 crore

In gram nipping is done at — DAS a. 10 to 20 b. 5 to 10 c. 30 to 40 d. 50 to 60

Description : In gram nipping is done at — DAS a. 10 to 20 b. 5 to 10 c. 30 to 40 d. 50 to 60

Last Answer : c. 30 to 40

Das Kapital, published in German in 1867, was authored by: a) Karl Marx b) John Maynard Keynes c) F. Hayek d) Samuelson

Description : Das Kapital, published in German in 1867, was authored by: a) Karl Marx b) John Maynard Keynes c) F. Hayek d) Samuelson

Last Answer : a) Karl Marx b) John Maynard Keynes c) F. Hayek d) Samuelson

The main critical stage of groundnut for irrigation

Description : The main critical stage of groundnut for irrigation

Last Answer : Ans.Flowering stage, Pegging stage and Pod formation stage

Which of the following crops are grown in Rabi as well as in Kharif season - I. Jowar II. Maize III. Urad (Black gram) IV. Moong (Green gram) V. Groundnut Correct code is - a. Only II, III and IV b. Only I, II and IV c. Only IV d. I, II, III, IV, V all

Description : Which of the following crops are grown in Rabi as well as in Kharif season - I. Jowar II. Maize III. Urad (Black gram) IV. Moong (Green gram) V. Groundnut Correct code is - a. Only II, III and IV b. Only I, II and IV c. Only IV d. I, II, III, IV, V all

Last Answer : d. I, II, III, IV, V all

What culture should be given priority in groundnut cultivation? a. Mycorrhiza b. Rhizobium c. Phosphobacteria d. Azospirillum

Description : What culture should be given priority in groundnut cultivation? a. Mycorrhiza b. Rhizobium c. Phosphobacteria d. Azospirillum

Last Answer : b. Rhizobium

ICRISAT researchers have developed strategies to keep groundnut free of which toxins? 1. Aflatoxin 2. Fungi toxin 3. Bacterial toxin 4. Both a and b

Description : ICRISAT researchers have developed strategies to keep groundnut free of which toxins? 1. Aflatoxin 2. Fungi toxin 3. Bacterial toxin 4. Both a and b

Last Answer : 4. Both a and b

Spreading type of groundnut have — character a. Dormant seed b. Good yielder c. Both a & b d. None of these

Description : Spreading type of groundnut have — character a. Dormant seed b. Good yielder c. Both a & b d. None of these

Last Answer : c. Both a & b

Which of the following crop have higher water use efficiency a. Sorghum b. Finger millet c. Groundnut d. Wheat

Description : Which of the following crop have higher water use efficiency a. Sorghum b. Finger millet c. Groundnut d. Wheat

Last Answer : b. Finger millet

NRC1 for Groundnut located at — a. Junagadh b. Bhopal c. Indore d. Hyderabad

Description : NRC1 for Groundnut located at — a. Junagadh b. Bhopal c. Indore d. Hyderabad

Last Answer : a. Junagadh

“Retting” is a process associated with which crop? a. Groundnut b. Maize c. Rice d. Jute

Description : “Retting” is a process associated with which crop? a. Groundnut b. Maize c. Rice d. Jute

Last Answer : d. Jute

Tikka disease of Groundnut is caused by — a. Cercospora arachidicola b. Cercosporidium personatum c. Both a & b d. Drechslera graminea

Description : Tikka disease of Groundnut is caused by — a. Cercospora arachidicola b. Cercosporidium personatum c. Both a & b d. Drechslera graminea

Last Answer : c. Both a & b

Groundnut wilting and damaged root is symptom of attack of — pest. a. Odontotermes obesus b. Spodoptera litura c. Holotrichia consanguinea d. None of these

Description : Groundnut wilting and damaged root is symptom of attack of — pest. a. Odontotermes obesus b. Spodoptera litura c. Holotrichia consanguinea d. None of these

Last Answer : c. Holotrichia consanguinea

What do you call the roads with on and off ramps, no stop lights, and an average speed limit of 55 - 65?

Description : What do you call the roads with on and off ramps, no stop lights, and an average speed limit of 55 - 65?

Last Answer : I would use the general term “highway” unless I knew the specific term for the road I was on. Obviously, “interstate” has a specific meaning, as does “freeway”, even if it is a bit anachronistic – so these terms are not interchangeable.