Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25
Last Answer : (B) 60-65
Description : P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90
Last Answer : (B) 15-20
Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80
Last Answer : (B) 35 to 45
Description : Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85
Last Answer : (D) 85
Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85
Last Answer : (B) 15 - 20
Description : Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5
Last Answer : (B) 0.2
Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75
Description : . Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80
Last Answer : Option B
Description : P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75
Last Answer : (A) 42-50
Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70
Last Answer : (B) 25-30
Description : Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65
Last Answer : (B) 15-25
Description : The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85
Last Answer : (B) 40
Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98
Last Answer : (A) 85
Description : The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99
Last Answer : (C) 85
Description : If water content of a soil is 40%, G is 2.70 and void ratio is 1.35, the degree of saturation is (A) 70 % (B) 75 % (C) 80 % (D) 85 %
Last Answer : Answer: Option C
Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80
Last Answer : (C) 45 to 50
Description : In a ball mill, the volume occupied by the balls (when the mill is stopped) is about __________ percent of the volume of the mill. (A) 35 (B) 50 (C) 70 (D) 85
Last Answer : (B) 50
Description : Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01
Last Answer : (A) 0.1-2
Description : Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0
Last Answer : (B) 0.2 to 0.4
Description : The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8
Last Answer : Option A
Description : Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80
Last Answer : (C) 50
Description : Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55 (C) 80 (D) 94
Last Answer : (D) 94
Description : Average sulphur content in Indian pyrites is about __________ percent. (A) 15 (B) 35 (C) 55 (D) 70
Last Answer : (B) 35
Description : Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65
Description : Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80
Description : Out of 100 kcal/second of incident radiant energy on the surface of a thermally transparent body, 300 kcal/second is reflected back. If the transmissivity of the body is 0.25, the emissivity of the surface will be (A) 0.35 (B) 0.45 (C) 0.55 (D) 0.85
Last Answer : (B) 0.45
Description : Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85
Description : U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85 (B) 50 (C) 3 (D) 97
Last Answer : (C) 3
Description : Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75
Last Answer : (B) 20 to 40
Description : When the circuit shown in the illustration is operating correctly, the voltage at the reference electrode will be kept in the optimum range of ____________. EL-0090 A. 0.01 - 0.05 volt B. 0.80 - 0.85 volt C. 35 - 60 volts D. 100 - 115 volts
Last Answer : Answer: B
Description : Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80
Last Answer : (D) 80
Description : 150. Nitrogen content in ammonium sulphate (a fertiliser) is around __________ percent. (A) 5 (B) 20 (C) 50 (D) 65
Last Answer : (B) 20
Description : The ordinary and maximum tolerance limit of sound by human being is – (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)
Last Answer : (2) 60 db to 80 db (decibel) Explanation: Normal speech is about 60 dB (decibels). A dangerous sound is anything that is 80 dB or higher which can lead to hearing loss. At 70 dB or ... the risk of harm to healthy ears is negligible. Listening to sound above 80 decibels can cause profound deafness.
Description : Percentage of water in buffalo milk is:- a. 65-67 % b. 70-75 % c. 80-85 % d. 87-90 %
Last Answer : d. 87-90 %
Description : The number of heart beats on an average in an adult human is in the range of (1) 60-65 (2) 66-70 (3) 71-80 (4) 85-90
Last Answer : 71-80
Description : The ordinary and maximum tolerance limit of sound by human being is (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)
Last Answer : 60 db to 80 db (decibel)
Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45
Last Answer : (B) 10 to 20
Description : A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum permissible angle of twist in the shaft is 1o. The inner diameter of the shaft is 0.7 times the outer diameter. The modulus of ... shaft is _______. (a) 43 to 45 (b) 50to 60 (c) 70 to 80 (d) 85 to 100
Last Answer : (a) 43 to 45
Description : The summarized balance sheet of Rakesh udyog Limited shows the balances of previous and current year of provision for taxation Rs. 50,000 and Rs. 65,000. If taxed paid during the current year amounted to Rs. 70,000 then amount charge ... a) Rs. 55,000 (b) Rs. 85,000 (c) Rs. 45,000 (d) Rs. 1,85,000
Last Answer : (b) Rs. 85,000
Description : The mean marks obtained by a class of 40 students is 65. The mean marks of half of the students is found to be 45. The mean marks of the remaining students is (A) 85 (B) 60 (C) 70 (D) 65
Last Answer : Answer: A
Description : About ____ percent of the proteins of white flour are relatively insoluble. a. 55 c. 75 b. 65 d. 85
Last Answer : d. 85
Description : Carbon percentage (by weight) in crude petroleum may be about (A) 65 (B) 75 (C) 85 (D) 95
Description : A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec
Last Answer : ANS: D
Description : Ammonium chloride solution is stored/ treated in __________ vessels/pipes. (A) Plain carbon steel (B) Stainless steel (C) Rubber or durmet-20 lined (D) Lead
Last Answer : (C) Rubber or durmet-20 lined
Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material
Last Answer : (C) Cast iron
Description : Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel
Last Answer : (B) Carbide
Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon
Last Answer : (D) Plain carbon
Description : Diesel used in naval applications has a minimum cetane number of (A) 25 (B) 35 (C) 45 (D) 65
Last Answer : (C) 45
Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805
Last Answer : (B) 0.055
Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505