According to IS: 456, maximum water-cement ratio should be
[ A ] 0.45
[ B ] 0.55
[ C ] 0.65
[ D ] 0.75

1 Answer

Answer :

[ B ] 0.55

Related questions

Description : According to IS: 456, maximum water-cement ratio should be [ A ] 0.45 [ B ] 0.55 [ C ] 0.65 [ D ] 0.75

Last Answer : [ B ] 0.55

Description : Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Last Answer : Answer: Option D

Description : A moist soil sample weighing 108 g has a volume of 60 cc. If water content is 25% and value of G = 2.52, the void ratio is (A) 0.55 (B) 0.65 (C) 0.75 (D) 0.80

Last Answer : (C) 0.75

Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ C ] 450 kg/m3

Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ C ] 450 kg/m3

Description : In a batch, 40% of the students offered Maths, 30% offered science and 15% offered both. If a student is selected at random, what is the probability that they has offered science or maths? A) 0.55 B) 0.65 C) 0.45 D) 0.75

Last Answer : Answer: A) P(M) = 0.40 P(S) =0.30 and P(M∩S) = 0.15 P(M∪S) = P(M) + P(S) - P(M∩S) = 0.55

Description : Pick up the correct statement from the following: (A) For thin structures subjected to wetting and drying, the water cement ratio should be 0.45 (B) For mass concrete structures subjected to wetting and ... under water, the water-cement ratio by weight should be 0.55 (D) All the above

Last Answer : Answer: Option D

Description : According to IS: 456-2000 spacing of vertical stirrups for shear reinforcement has been limited to [ A ] 0.75 d [ B ] 450 mm [ C ] lesser of 0.75 d or 300 mm [ D ] lesser of 0.75d or 450 mm

Last Answer : [ C ] lesser of 0.75 d or 300 mm

Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Last Answer : [ B ] 0.25 to 0.30

Description : According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ B ] 300 kg/m3

Description : According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ B ] 300 kg/m3

Description : According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 20 cm (B) 30 cm (C) 40 cm (D) 75 cm

Last Answer : Answer: Option B

Description : The compression in steel (fS) at failure for Fe - 415 grade steel using stress-strain curve shall be [ A ] 0.87 fy [ B ] 0.75 fy [ C ] 0.45 fy [ D ] 0.55 fy

Last Answer : [ B ] 0.75 fy

Description : According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3

Last Answer : [ D ] 0.3

Description : According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3

Last Answer : [ D ] 0.3

Description : A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Last Answer : Answer: Option B

Description : Maximum distance between expansion joints in structures as per IS: 456 1978 is (A) 20 m (B) 30 m (C) 45 m (D) 60 m

Last Answer : (C) 45

Description : The heat of hydration for low heat cement at the age of 7 days shall not exceed [ A ] 80 cal / gm [ B ] 75 cal / gm [ C ] 70 cal / gm [ D ] 65 cal / gm

Last Answer : [ D ] 65 cal / gm

Description : In a bag there are coins of 25p, 10p and 5p in the ratio 1:2:3.If there are Rs.45 in all then find how many 25p coins are there? A) 60 B) 65 C) 70 D) 75 E) None of these

Last Answer : Answer: D [(25x) + (10x × 2) + (5x × 3)] / 100 = 45 [25x + 20x + 15x] / 100 = 45 60 x = 4500 X = 4500/60 = 75

Description : According to IS 456, minimum slenderness ratio for a short concrete column is (a) Less than 12 (b) Between 12 and 18 (c) Between 18 and 24 (d) More than 24

Last Answer : (a) Less than 12

Description : According to IS:456-2000, the minimum slenderness ratio for a short column is [ A ] Less than 12 [ B ] Between 12 and 18 [ C ] Less than 18 [ D ] Must be greater than 18

Last Answer : [ A ] Less than 12

Description : According to IS: 456-2000, the span/overall depth ratio for a continuous two-way slab in order to control deflection is given by [ A ] 20 [ B ] 28 [ C ] 32 [ D ] 40

Last Answer : [ C ] 32

Description : The span/over all depth ratio for a simply supported two-way slab according to IS : 456- 2000 is given by [ A ] 20 [ B ] 28 [ C ] 32 [ D ] 40

Last Answer : [ B ] 28

Description : According to IS: 456-2000 Maximum spacing of shear reinforcement in no case shall not exceed [ A ] 250 mm [ B ] 300 mm [ C ] 350 mm [ D ] 450 mm

Last Answer : [ B ] 300 mm

Description : The level of guard rail in bridges shall not be lower than that of running rail by more than a) 25 mm* b) 55 mm c) 75 mm d) 65 mm

Last Answer : a) 25 mm*

Description : About ____ percent of the proteins of white flour are relatively insoluble. a. 55 c. 75 b. 65 d. 85

Last Answer : d. 85

Description : X, Y, Z started a business by a share of 8:6:9. The time for which they invested was 6:7:8. The difference in the profit of X and Z is what % of difference in the profit of Zand Y? A) 65  B) 80 C) 55 D) 75

Last Answer : Answer: B)  Ratio of investment =8:6:9  Ratio of time =6:7:8  Ratio of X,Y,Z=48:42:72  =8:7:12  (X-Z)/(Z-Y) = 4/5 *100 =80%

Description : Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, ... C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Last Answer : C. 0, 1,10,11, 50, 51, 75, 76,100,101

Description : In Groundnut pegging stage comes after — DAS a. 35 b. 45 c. 55 d. 65

Last Answer : c. 55

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

Description : Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °

Last Answer : Ans - b. 42-45 °

Description : The summarized balance sheet of Rakesh udyog Limited shows the balances of previous and current year of provision for taxation Rs. 50,000 and Rs. 65,000. If taxed paid during the current year amounted to Rs. 70,000 then amount charge ... a) Rs. 55,000 (b) Rs. 85,000 (c) Rs. 45,000 (d) Rs. 1,85,000

Last Answer : (b) Rs. 85,000

Description : Permissible width of crack at the surface of concrete for „moderate‟ environmental conditions according to IS : 456-2000 is [ A ] 0.1 mm [ B ] 0.2 mm [ C ] 0.3 mm [ D ] 0.4 mm

Last Answer : [ B ] 0.2 mm

Description : According to IS: 456-2000 the ultimate moment of resistance of a slab for Fe - 415 HYSD bars is; [ A ] Mu = 0.138 fck bd2 [ B ] Mu = 0.145 fck bd2 [ C ] Mu = 0.152 fck bd2 [ D ] Mu = 0.165 fck bd2

Last Answer : [ A ] Mu = 0.138 fck bd2

Description : According to IS:456-2000, Limiting value of yield strain for Fe250grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Last Answer : [ B ] 0.0031

Description : According to IS: 456-2000, limiting value of yield strain for Fe415 grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Last Answer : [ D ] 0.0038

Description : According to IS:456-2000, the total acid soluble chlorides in concrete is restricted to________ of concrete [ A ] 0.2 kg/m3 [ B ] 0.4 kg/m3 [ C ] 2 kg/m3 [ D ] 4 kg/m3

Last Answer : [ B ] 0.4 kg/m3

Description : According to IS:456-2000, Limiting value of yield strain for Fe250 grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Last Answer : [ B ] 0.0031

Description : According to IS: 456-2000, limiting value of yield strain for Fe415 grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Last Answer : [ D ] 0.0038

Description : According to IS:456-2000, the total acid soluble chlorides in concrete is restricted to________ of concrete [ A ] 0.2 kg/m3 [ B ] 0.4 kg/m3 [ C ] 2 kg/m3 [ D ] 4 kg/m3

Last Answer : [ B ] 0.4 kg/m3

Description : In case of honey –comb structure, the water-cement ratio is (a) More than 0.35 (b) Less than 0.35 (c) More than 0.45 (d) Less than 0.45

Last Answer : (b) Less than 0.35

Description : The minimum water-cement ratio is (a) 0.35 (b) 0.45 (c) 0.50 (d) None of these

Last Answer : (a) 0.35

Description : Nominal cover for M30 grade concrete in moderate exposure is (as per IS:456-2000) [ A ] 20 mm [ B ] 30 mm [ C ] 45 mm [ D ] 50 mm

Last Answer : [ B ] 30 mm

Description : Nominal cover for M30 grade concrete in moderate exposure is (as per IS:456-2000) [ A ] 20 mm [ B ] 30 mm [ C ] 45 mm [ D ] 50 mm

Last Answer : [ B ] 30 mm

Description : According to ISI recommendations, the maximum depth of stress block for balanced section of a beam of effective depth d is (A) 0.43 d (B) 0.55 d (C) 0.68 d (D) 0.85 d

Last Answer : Answer: Option A

Description : If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55

Last Answer : Answer: Option D

Description : If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Last Answer : Answer: Option B

Description : The efficiency of a pump may be taken as (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Last Answer : Answer: Option C

Description : Permissible noise level at Residential area during night time is : (1) 45 dB (2) 55 dB (3) 75 dB (4) 80 dB

Last Answer : (1) 45 dB Explanation: As per the norm, the permissible noise level in residential areas is 45 db during night time, 55 db during day and in commercial areas it is 55 db during night and 65 db during day.

Description : In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 ... (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Last Answer : (C) 105 days to 120 days and 18 kg to 21 kg