Which is the most efficient dust removal equipment for removal of submicronic dust particles from blast furnace gas? (A) Packed scrubber (B) Gravity settling chamber (C) Electrostatic precipitator (D) Hydrocyclone

Which is the most efficient dust removal equipment for removal of
submicronic dust particles from blast furnace gas?
(A) Packed scrubber
(B) Gravity settling chamber
(C) Electrostatic precipitator
(D) Hydrocyclone
by

1 Answer

Answer :

(C) Electrostatic precipitator
by

Related questions

The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Last Answer : (C) Electro-static precipitator

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

Most efficient and suitable dust removal equipment for removal of fly￾ash from flue gas in a thermal power plant is the (A) Gravity settling chamber (B) Cyclone separator (C) Electrostatic precipitator (D) Bag filter

Description : Most efficient and suitable dust removal equipment for removal of fly￾ash from flue gas in a thermal power plant is the (A) Gravity settling chamber (B) Cyclone separator (C) Electrostatic precipitator (D) Bag filter

Last Answer : (C) Electrostatic precipitator

Which of the following does not discharge the dust collected as a dry solid? (A) Electrostatic precipitator (B) Wet scrubber (C) Bag filter (D) Gravity settling chamber

Description : Which of the following does not discharge the dust collected as a dry solid? (A) Electrostatic precipitator (B) Wet scrubber (C) Bag filter (D) Gravity settling chamber

Last Answer : (B) Wet scrubber

Which of the following fine dust removal equipments is the most efficient? (A) Bag filter (B) Scrubber (C) Electrostatic precipitator (D) Cyclone separator

Description : Which of the following fine dust removal equipments is the most efficient? (A) Bag filter (B) Scrubber (C) Electrostatic precipitator (D) Cyclone separator

Last Answer : (C) Electrostatic precipitator

. The most suitable equipment for removing the fine dust particle (< 1 micron dia.) from air below its dew point will be a/an (A) Bag filter (B) Electrostatic precipitator (C) Cyclone separator (D) Wet scrubber

Description : . The most suitable equipment for removing the fine dust particle (< 1 micron dia.) from air below its dew point will be a/an (A) Bag filter (B) Electrostatic precipitator (C) Cyclone separator (D) Wet scrubber

Last Answer : (B) Electrostatic precipitator

Traces of tar fog present in the coke oven gas is removed by (A) Cyclone separator (B) Wet packed scrubber (C) Electrostatic precipitator (D) Washing with monoethanolamine

Description : Traces of tar fog present in the coke oven gas is removed by (A) Cyclone separator (B) Wet packed scrubber (C) Electrostatic precipitator (D) Washing with monoethanolamine

Last Answer : (C) Electrostatic precipitator

Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Description : Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Last Answer : (C) Coke oven battery heating

Which of the following dust collection equipments is the least efficient (for sub-micronic particles)? (A) Dust catcher (gravity type) (B) Cyclone separator (C) Bag filter (D) Hollow wet scrubber

Description : Which of the following dust collection equipments is the least efficient (for sub-micronic particles)? (A) Dust catcher (gravity type) (B) Cyclone separator (C) Bag filter (D) Hollow wet scrubber

Last Answer : (A) Dust catcher (gravity type)

Gravity settling process is not involved in the working of a (A) Hydrocyclone (B) Classifier (C) Dorr-thickener (D) Sedimentation tank

Description : Gravity settling process is not involved in the working of a (A) Hydrocyclone (B) Classifier (C) Dorr-thickener (D) Sedimentation tank

Last Answer : (A) Hydrocyclone

Particle size range in which dust catcher (gravity settling chamber) works most effectively and efficiently is __________ microns. (A) < 5 (B) 10 to 25 (C) < 74 (D) > 1000

Description : Particle size range in which dust catcher (gravity settling chamber) works most effectively and efficiently is __________ microns. (A) < 5 (B) 10 to 25 (C) < 74 (D) > 1000

Last Answer : (C) < 74

Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature (C) Heat release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Description : Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Last Answer : (B) 1000°C and 10 atm

In large thermal power stations very fine particulates present in flue gas are removed by (A) Wet scrubber (B) Bag filter (C) Electrostatic precipitators (D) Dust catcher

Description : In large thermal power stations very fine particulates present in flue gas are removed by (A) Wet scrubber (B) Bag filter (C) Electrostatic precipitators (D) Dust catcher

Last Answer : (C) Electrostatic precipitators

Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by (A) Biological oxygen pond (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate) (C) Lagoons (D) Filtration

Description : Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by (A) Biological oxygen pond (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate) (C) Lagoons (D) Filtration

Last Answer : (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate)

Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200

Description : Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200

Last Answer : (A) 15-30

Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Description : Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Last Answer : (B) Filter thickener

Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Description : Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Last Answer : (A) Electrostatic precipitato

Naphthalene is removed from coke oven gas by (A) Adsorbing on palladium (B) Absorbing in ethanolamine (C) Scrubbing with wash oil (D) Passing it through electrostatic precipitator

Description : Naphthalene is removed from coke oven gas by (A) Adsorbing on palladium (B) Absorbing in ethanolamine (C) Scrubbing with wash oil (D) Passing it through electrostatic precipitator

Last Answer : (C) Scrubbing with wash oil

. An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Description : . An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Last Answer : (A) Blast furnace stoves

Combustion of pulverised fuel (A) Requires larger combustion chamber than rich gaseous fuel (B) In a metallurgical furnace does not contaminate the product in the furnace by ash from fuel (C) Suppresses the discharge of fine dust and grit into atmosphere (D) All (A), (B) and (C)

Description : Combustion of pulverised fuel (A) Requires larger combustion chamber than rich gaseous fuel (B) In a metallurgical furnace does not contaminate the product in the furnace by ash from fuel (C) Suppresses the discharge of fine dust and grit into atmosphere (D) All (A), (B) and (C)

Last Answer : (A) Requires larger combustion chamber than rich gaseous fuel

What device is used to remove sulfur dioxide from power plant stack gases? w) scrubber x) precipitator y) digester z) clarifier

Description : What device is used to remove sulfur dioxide from power plant stack gases? w) scrubber x) precipitator y) digester z) clarifier

Last Answer : ANSWER: W -- SCRUBBER

Operating principle of cyclone separator is based on the action of __________ dust particles. (A) Diffusion of (B) Centrifugal force on (C) Gravitational force on (D) Electrostatic force on

Description : Operating principle of cyclone separator is based on the action of __________ dust particles. (A) Diffusion of (B) Centrifugal force on (C) Gravitational force on (D) Electrostatic force on

Last Answer : (B) Centrifugal force on

Two particles are called to be equal settling, if they are having the same. (A) Size (B) Specific gravity (C) Terminal velocities in the same fluid & in the same field of force (D) None of these

Description : Two particles are called to be equal settling, if they are having the same. (A) Size (B) Specific gravity (C) Terminal velocities in the same fluid & in the same field of force (D) None of these

Last Answer : (C) Terminal velocities in the same fluid & in the same field of force

Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Description : Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Last Answer : (D) 60 KV DC

Ionisation potential employed in the industrial electrostatic precipitator is of the order of (A) 30 to 70 kV DC (B) 30 to 70 kV AC (C) 230 V AC (D) 230 V DC

Description : Ionisation potential employed in the industrial electrostatic precipitator is of the order of (A) 30 to 70 kV DC (B) 30 to 70 kV AC (C) 230 V AC (D) 230 V DC

Last Answer : (A) 30 to 70 kV DC

Corona discharge is related to the operation of a/an (A) Induction motor (B) Electrostatic precipitator (C) Fast breeder reactor (D) Magneto hydrodynamic generator (MHD)

Description : Corona discharge is related to the operation of a/an (A) Induction motor (B) Electrostatic precipitator (C) Fast breeder reactor (D) Magneto hydrodynamic generator (MHD)

Last Answer : Option B

Metallic wire mesh is used as a filtering medium for the separation of dust from dust laden gas in case of a/an (A) Air filter (B) Bag filter (C) Venturi scrubber (D) Hydrocyclones

Description : Metallic wire mesh is used as a filtering medium for the separation of dust from dust laden gas in case of a/an (A) Air filter (B) Bag filter (C) Venturi scrubber (D) Hydrocyclones

Last Answer : (A) Air filter

Which of the following will be unsuitable for dust cleaning from flue gas at 400°C from a pulverised coal fired boiler? (A) Multicyclones (B) Bag filter (C) Wet scrubber (D) Hydrocyclones

Description : Which of the following will be unsuitable for dust cleaning from flue gas at 400°C from a pulverised coal fired boiler? (A) Multicyclones (B) Bag filter (C) Wet scrubber (D) Hydrocyclones

Last Answer : (B) Bag filter

Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven(B) Blast furnace stoves(C) Beehive coke oven(D) High pressure boiler

Description : Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven (B) Blast furnace stoves (C) Beehive coke oven (D) High pressure boiler

Last Answer : (D) High pressure boiler

Sulphuric acid mist is arrested by using a __________ scrubber. (A) Packed wet (B) Hollow wet (C) Venturi (D) Co-current

Description : Sulphuric acid mist is arrested by using a __________ scrubber. (A) Packed wet (B) Hollow wet (C) Venturi (D) Co-current

Last Answer : (C) Venturi

Which of the following equipments is used for liquid dispersion? (A) Packed column (B) Venturi scrubber (C) Bubble cap plate column (D) Wetted wall column

Description : Which of the following equipments is used for liquid dispersion? (A) Packed column (B) Venturi scrubber (C) Bubble cap plate column (D) Wetted wall column

Last Answer : Option B

or efficient performance of a blast furnace, the extent of reduction of Wustite (FeO) should be (A) 100% indirect reduction (B) 100% direct reduction (C) 50-60% indirect reduction (D) 30-40% indirect reduction

Description : or efficient performance of a blast furnace, the extent of reduction of Wustite (FeO) should be (A) 100% indirect reduction (B) 100% direct reduction (C) 50-60% indirect reduction (D) 30-40% indirect reduction

Last Answer : (C) 50-60% indirect reduction

or efficient performance of a blast furnace, the extent of reduction of Wustite (FeO) should be (A) 100% indirect reduction (B) 100% direct reduction (C) 50-60% indirect reduction (D) 30-40% indirect reduction

Description : or efficient performance of a blast furnace, the extent of reduction of Wustite (FeO) should be (A) 100% indirect reduction (B) 100% direct reduction (C) 50-60% indirect reduction (D) 30-40% indirect reduction

Last Answer : (C) 50-60% indirect reduction

Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Description : Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Last Answer : (B) 3

Gravity settling tanks/porous filters are used to remove particles larger than

Description : Gravity settling tanks/porous filters are used to remove particles larger than

Last Answer : Gravity settling tanks/porous filters are used to remove particles larger than A. `2 mum ` B. `50 mum` C. `20 mum` D. `10 mum`

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

Electrostatic precipitator is used to control the pollution of – (1) air (2) water (3) noise (4) thermal

Description : Electrostatic precipitator is used to control the pollution of – (1) air (2) water (3) noise (4) thermal

Last Answer : (1) air Explanation: An electrostatic precipitator (ESP), or electrostatic air cleaner is a particulate collection device that removes particles from a flowing gas (such as air) using the force of an ... particles from a flowing gas (such as air) using the force of an induced electrostatic charge.

Electrostatic precipitator is used to control — (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Description : Electrostatic precipitator is used to control — (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Last Answer : (1) Air pollution Explanation: An electrostatic precipitator (ESP), or electrostatic air cleaner is a particulate collection device that removes particles from a flowing has (such as air) using the force ... , and can easily remove fine particulate matter such as dust and smoke from the air stream.

Electrostatic Precipitator is used to control the –

Description : Electrostatic Precipitator is used to control the –

Last Answer : consequent pole

Electrostatic precipitator is used to remove:

Description : 17 Electrostatic precipitator is used to remove: a) Poisonous gases present in the smoke released from the industry b) Carbon dioxide present in the smoke released from the automobiles c) ... smoke released from the automobiles d) Particulate matter present in the smoke released from the industry

Last Answer : ANS: d Particulate matter present in the smoke released from the industry

Electrostatic precipitator is used to control – (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Description : Electrostatic precipitator is used to control – (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Last Answer : Air pollution

Electrostatic precipitator is used to control the pollution of (1) air (2) water (3) noise (4) thermal

Description : Electrostatic precipitator is used to control the pollution of (1) air (2) water (3) noise (4) thermal

Last Answer : air

In the cyclone separator used for separation of dust from dust laden gas, the gas (A) Enters the cyclone from the top (B) Is admitted tangentially at high velocity (C) Develops a helical motion inside the chamber(D) Both (B) and (C

Description : In the cyclone separator used for separation of dust from dust laden gas, the gas (A) Enters the cyclone from the top (B) Is admitted tangentially at high velocity (C) Develops a helical motion inside the chamber (D) Both (B) and (C

Last Answer : (D) Both (B) and (C

Compressed air should not be used to clean motor controller equipment because ________________. A. it may force metallic particles into coil insulation B. the surrounding area may need additional cleaning C. the air blast dries out insulation quickly D. a mask and respirator would be required

Description : Compressed air should not be used to clean motor controller equipment because ________________. A. it may force metallic particles into coil insulation B. the surrounding area may need additional cleaning C. the air blast dries out insulation quickly D. a mask and respirator would be required

Last Answer : Answer: A

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components with a soft cotton rag. B. Blowing a high velocity stream of compressed air rapidly across the components. C. Using a vacuum cleaner to remove debris from the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Description : Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components ... the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Last Answer : Answer: C

Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of(A) Furnace oil with air(B) Furnace oil with oxygen(C) Blast furnace gas with air(D) Blast furnace gas with oxygen

Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen

Last Answer : (C) Blast furnace gas with air