Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Dust collection efficiency of electrostatic precipitator can be as high as
99.9%. Maximum temperature and pressure of dust laden gas that can be
cleaned in an electrostatic precipitator is respectively.
(A) 200°C and 5 atm
(B) 1000°C and 10 atm
(C) 500°C and 50 atm
(D) 1000°C and 500 atm
by

1 Answer

Answer :

(B) 1000°C and 10 atm
by

Related questions

Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Description : Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Last Answer : (A) 4 kgf/cm2 & 500°C

Pressure & temperature maintained in catalytic cracking is about (A) 2 atm & 500°C (B) 10 atm & 500°C (C) 30 atm & 200°C (D) 50 atm & 750°C

Description : Pressure & temperature maintained in catalytic cracking is about (A) 2 atm & 500°C (B) 10 atm & 500°C (C) 30 atm & 200°C (D) 50 atm & 750°C

Last Answer : (A) 2 atm & 500°C

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

Ethylene oxide is produced by oxidation of ethylene in presence of AgOcatalyst at(A) 1 atm & 100°C(B) 5 atm & 275°C(C) 100 atm & 500°C(D) 50 atm & 1000°C

Description : Ethylene oxide is produced by oxidation of ethylene in presence of AgOcatalyst at (A) 1 atm & 100°C (B) 5 atm & 275°C (C) 100 atm & 500°C (D) 50 atm & 1000°C

Last Answer : (B) 5 atm & 275°C

Temperature and pressure in ammonia converter is (A) 200 atm, 1000°C (B) 450 atm, 200°C (C) 450 atm, 550°C (D) 450 atm, 1000°C

Description : Temperature and pressure in ammonia converter is (A) 200 atm, 1000°C (B) 450 atm, 200°C (C) 450 atm, 550°C (D) 450 atm, 1000°C

Last Answer : (C) 450 atm, 550°C

Most efficient and suitable dust removal equipment for removal of fly￾ash from flue gas in a thermal power plant is the (A) Gravity settling chamber (B) Cyclone separator (C) Electrostatic precipitator (D) Bag filter

Description : Most efficient and suitable dust removal equipment for removal of fly￾ash from flue gas in a thermal power plant is the (A) Gravity settling chamber (B) Cyclone separator (C) Electrostatic precipitator (D) Bag filter

Last Answer : (C) Electrostatic precipitator

Which is the most efficient dust removal equipment for removal of submicronic dust particles from blast furnace gas? (A) Packed scrubber (B) Gravity settling chamber (C) Electrostatic precipitator (D) Hydrocyclone

Description : Which is the most efficient dust removal equipment for removal of submicronic dust particles from blast furnace gas? (A) Packed scrubber (B) Gravity settling chamber (C) Electrostatic precipitator (D) Hydrocyclone

Last Answer : (C) Electrostatic precipitator

How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical shaft kiln? (A) 500°C (B) 750°C (C) 1000°C (D) 1500°C

Description : How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical shaft kiln? (A) 500°C (B) 750°C (C) 1000°C (D) 1500°C

Last Answer : (C) 1000°C

. The most suitable equipment for removing the fine dust particle (< 1 micron dia.) from air below its dew point will be a/an (A) Bag filter (B) Electrostatic precipitator (C) Cyclone separator (D) Wet scrubber

Description : . The most suitable equipment for removing the fine dust particle (< 1 micron dia.) from air below its dew point will be a/an (A) Bag filter (B) Electrostatic precipitator (C) Cyclone separator (D) Wet scrubber

Last Answer : (B) Electrostatic precipitator

Which of the following fine dust removal equipments is the most efficient? (A) Bag filter (B) Scrubber (C) Electrostatic precipitator (D) Cyclone separator

Description : Which of the following fine dust removal equipments is the most efficient? (A) Bag filter (B) Scrubber (C) Electrostatic precipitator (D) Cyclone separator

Last Answer : (C) Electrostatic precipitator

Which of the following does not discharge the dust collected as a dry solid? (A) Electrostatic precipitator (B) Wet scrubber (C) Bag filter (D) Gravity settling chamber

Description : Which of the following does not discharge the dust collected as a dry solid? (A) Electrostatic precipitator (B) Wet scrubber (C) Bag filter (D) Gravity settling chamber

Last Answer : (B) Wet scrubber

Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Description : Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Last Answer : (B) 190°C and 200 atm

The activity of pure hydrogen gas at 1000°C and 5 atm pressure (A) Is always less than 1 (B) Is always greater than 1 (C) Can be 5 (D) Depends on the choice of the standard state

Description : The activity of pure hydrogen gas at 1000°C and 5 atm pressure (A) Is always less than 1 (B) Is always greater than 1 (C) Can be 5 (D) Depends on the choice of the standard state

Last Answer : (D) Depends on the choice of the standard state

Humid volume is the total volume in m3 of 1 kg of (A) Vapour laden gas at 1 atm. and room temperature (B) Gas plus its accompanying vapour at 1 atm. and room temperature (C) Gas plus its accompanying vapour at 1 atm. and gas temperature (D) Vapour laden gas at 1 atm. and gas temperature

Description : Humid volume is the total volume in m3 of 1 kg of (A) Vapour laden gas at 1 atm. and room temperature (B) Gas plus its accompanying vapour at 1 atm. and room temperature (C) Gas plus its accompanying vapour at 1 atm. and gas temperature (D) Vapour laden gas at 1 atm. and gas temperature

Last Answer : (C) Gas plus its accompanying vapour at 1 atm. and gas temperature

Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Description : Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Last Answer : (A) Electrostatic precipitato

Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Description : Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Last Answer : (C) Coke oven battery heating

Traces of tar fog present in the coke oven gas is removed by (A) Cyclone separator (B) Wet packed scrubber (C) Electrostatic precipitator (D) Washing with monoethanolamine

Description : Traces of tar fog present in the coke oven gas is removed by (A) Cyclone separator (B) Wet packed scrubber (C) Electrostatic precipitator (D) Washing with monoethanolamine

Last Answer : (C) Electrostatic precipitator

Naphthalene is removed from coke oven gas by (A) Adsorbing on palladium (B) Absorbing in ethanolamine (C) Scrubbing with wash oil (D) Passing it through electrostatic precipitator

Description : Naphthalene is removed from coke oven gas by (A) Adsorbing on palladium (B) Absorbing in ethanolamine (C) Scrubbing with wash oil (D) Passing it through electrostatic precipitator

Last Answer : (C) Scrubbing with wash oil

Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C

Description : Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C

Last Answer : (B) 15-45 Kgf/cm2 & 450-550°C

In the cyclone separator used for separation of dust from dust laden gas, the gas (A) Enters the cyclone from the top (B) Is admitted tangentially at high velocity (C) Develops a helical motion inside the chamber(D) Both (B) and (C

Description : In the cyclone separator used for separation of dust from dust laden gas, the gas (A) Enters the cyclone from the top (B) Is admitted tangentially at high velocity (C) Develops a helical motion inside the chamber (D) Both (B) and (C

Last Answer : (D) Both (B) and (C

The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Last Answer : (C) Electro-static precipitator

Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Description : Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Description : Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Last Answer : (D) 60 KV DC

Ionisation potential employed in the industrial electrostatic precipitator is of the order of (A) 30 to 70 kV DC (B) 30 to 70 kV AC (C) 230 V AC (D) 230 V DC

Description : Ionisation potential employed in the industrial electrostatic precipitator is of the order of (A) 30 to 70 kV DC (B) 30 to 70 kV AC (C) 230 V AC (D) 230 V DC

Last Answer : (A) 30 to 70 kV DC

Corona discharge is related to the operation of a/an (A) Induction motor (B) Electrostatic precipitator (C) Fast breeder reactor (D) Magneto hydrodynamic generator (MHD)

Description : Corona discharge is related to the operation of a/an (A) Induction motor (B) Electrostatic precipitator (C) Fast breeder reactor (D) Magneto hydrodynamic generator (MHD)

Last Answer : Option B

Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of materials (C) Size enlargement (opposite of size reduction) is not a mechanical operation (D) A 'dust catcher' is simply an enlargement in a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Description : Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of ... a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Last Answer : (C) Size enlargement (opposite of size reduction) is not a mechanical operation

Metallic wire mesh is used as a filtering medium for the separation of dust from dust laden gas in case of a/an (A) Air filter (B) Bag filter (C) Venturi scrubber (D) Hydrocyclones

Description : Metallic wire mesh is used as a filtering medium for the separation of dust from dust laden gas in case of a/an (A) Air filter (B) Bag filter (C) Venturi scrubber (D) Hydrocyclones

Last Answer : (A) Air filter

Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200

Description : Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200

Last Answer : (A) 15-30

The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Description : The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Last Answer : (C) 85

Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high purity of aluminium (99.9%) (B) Keep the electrolyte in liquid condition by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Description : Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high ... by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Electrostatic precipitator is used to control the pollution of – (1) air (2) water (3) noise (4) thermal

Description : Electrostatic precipitator is used to control the pollution of – (1) air (2) water (3) noise (4) thermal

Last Answer : (1) air Explanation: An electrostatic precipitator (ESP), or electrostatic air cleaner is a particulate collection device that removes particles from a flowing gas (such as air) using the force of an ... particles from a flowing gas (such as air) using the force of an induced electrostatic charge.

Electrostatic precipitator is used to control — (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Description : Electrostatic precipitator is used to control — (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Last Answer : (1) Air pollution Explanation: An electrostatic precipitator (ESP), or electrostatic air cleaner is a particulate collection device that removes particles from a flowing has (such as air) using the force ... , and can easily remove fine particulate matter such as dust and smoke from the air stream.

Electrostatic Precipitator is used to control the –

Description : Electrostatic Precipitator is used to control the –

Last Answer : consequent pole

Electrostatic precipitator is used to remove:

Description : 17 Electrostatic precipitator is used to remove: a) Poisonous gases present in the smoke released from the industry b) Carbon dioxide present in the smoke released from the automobiles c) ... smoke released from the automobiles d) Particulate matter present in the smoke released from the industry

Last Answer : ANS: d Particulate matter present in the smoke released from the industry

Electrostatic precipitator is used to control – (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Description : Electrostatic precipitator is used to control – (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Last Answer : Air pollution

Electrostatic precipitator is used to control the pollution of (1) air (2) water (3) noise (4) thermal

Description : Electrostatic precipitator is used to control the pollution of (1) air (2) water (3) noise (4) thermal

Last Answer : air

If the expected time for completion of a project is 10 days with a standard deviation of 2 days, the expected time of completion of the project with 99.9% probability is (A) 4 days (B) 6 days (C) 10 days (D) 16 day

Description : If the expected time for completion of a project is 10 days with a standard deviation of 2 days, the expected time of completion of the project with 99.9% probability is (A) 4 days (B) 6 days (C) 10 days (D) 16 day

Last Answer : (D) 16 days

In large thermal power stations very fine particulates present in flue gas are removed by (A) Wet scrubber (B) Bag filter (C) Electrostatic precipitators (D) Dust catcher

Description : In large thermal power stations very fine particulates present in flue gas are removed by (A) Wet scrubber (B) Bag filter (C) Electrostatic precipitators (D) Dust catcher

Last Answer : (C) Electrostatic precipitators

Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge

Description : Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge

Last Answer : (A) Cyclone separator

Choose the condition that must be specified in order to liquify CO2(triple point for CO2is - 57°C and 5.2 atm). (A) Pressure must be kept below 5.2 atm (B) Temperature must be kept above - 57°C (C) Pressure must be kept below 5.2 atm. and temperature must be kept above 57°C (D) Pressure and temperature must be kept below 5.2 atm. and - 57°C respectively

Description : Choose the condition that must be specified in order to liquify CO2(triple point for CO2is - 57°C and 5.2 atm). (A) Pressure must be kept below 5.2 atm (B) Temperature must be kept above - ... be kept above 57°C (D) Pressure and temperature must be kept below 5.2 atm. and - 57°C respectively

Last Answer : (D) Pressure and temperature must be kept below 5.2 atm. and - 57°C respectively

If the expected time of completion of a project is 60 weeks with a standard deviation of 5 weeks, the probability of completing the project in 50 weeks and 65 weeks respectively will be (A) 2.3% and 84.1% (B) 97.7% and 84.1% (C) 97.7 % and 15.9% (D) 15.9% and 97.7%

Description : If the expected time of completion of a project is 60 weeks with a standard deviation of 5 weeks, the probability of completing the project in 50 weeks and 65 weeks respectively will be (A) 2.3% and 84.1% (B) 97.7% and 84.1% (C) 97.7 % and 15.9% (D) 15.9% and 97.7%

Last Answer : (A) 2.3% and 84.1%

With increase in the time of carbonisation at a particular temperature(say 1000°C), the __________ percentage in coke oven gas increases. (A) Hydrogen (B) Methane (C) Unsaturated hydrocarbons (D) All (A), (B) and (C)

Description : With increase in the time of carbonisation at a particular temperature(say 1000°C), the __________ percentage in coke oven gas increases. (A) Hydrogen (B) Methane (C) Unsaturated hydrocarbons (D) All (A), (B) and (C)

Last Answer : (A) Hydrogen

The sun is made up of 99.9% of -------- and -------? A. Oxygen and Hydrogen B. Hydrogen and Sulfur C. Carbon and Silicon D. Hydrogen and Helium (Answer)

Description : The sun is made up of 99.9% of -------- and -------? A. Oxygen and Hydrogen B. Hydrogen and Sulfur C. Carbon and Silicon D. Hydrogen and Helium (Answer)

Last Answer : D. Hydrogen and Helium (Answer)

Which hot dust-laden wind is blowing from Sahara desert to Mediterranean region? -Do You Know?

Description : Which hot dust-laden wind is blowing from Sahara desert to Mediterranean region? -Do You Know?

Last Answer : answer:

Which hot dust-laden wind is blowing from Sahara desert to Mediterranean region?

Description : Which hot dust-laden wind is blowing from Sahara desert to Mediterranean region?

Last Answer : Sirocco

Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel(B) 18/8 stainless steel(C) Mild steel(D) High silicon iron (14% Si)

Description : Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel (B) 18/8 stainless steel (C) Mild steel (D) High silicon iron (14% Si)

Last Answer : (A) Molybdenum stainless steel

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

__________ glass is used in the mercury in glass thermometer meant for measuring a temperature of 500°C. (A) Borosilicate (B) High silica (C) Supermax (D) Lead

Description : __________ glass is used in the mercury in glass thermometer meant for measuring a temperature of 500°C. (A) Borosilicate (B) High silica (C) Supermax (D) Lead

Last Answer : (C) Supermax

Operating principle of cyclone separator is based on the action of __________ dust particles. (A) Diffusion of (B) Centrifugal force on (C) Gravitational force on (D) Electrostatic force on

Description : Operating principle of cyclone separator is based on the action of __________ dust particles. (A) Diffusion of (B) Centrifugal force on (C) Gravitational force on (D) Electrostatic force on

Last Answer : (B) Centrifugal force on

Kel-F is a material, which is (A) Chemically known as Polychlorotrifluoroethylene (PTFE) (B) Having excellent chemical & high temperature resistance (upto 200°C) (C) Having elastomeric properties (D) All (A), (B) and (C)

Description : Kel-F is a material, which is (A) Chemically known as Polychlorotrifluoroethylene (PTFE) (B) Having excellent chemical & high temperature resistance (upto 200°C) (C) Having elastomeric properties (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)