A device operating at network layer is called a. Repeater b. Router c. Gateway d. Bridge

A device operating at network layer is called
a. Repeater
b. Router
c. Gateway
d. Bridge
by

1 Answer

Answer :

b. Router
by

Related questions

A device operating at Physical layer is called a. Repeater b. Gateway c. Router d. Bridge

Description : A device operating at Physical layer is called a. Repeater b. Gateway c. Router d. Bridge

Last Answer : a. Repeater

In IT networking, which of the following device is used in physical layer? (1) Repeater (2) Router (3) Transport Gateway (4) Bridge

Description : In IT networking, which of the following device is used in physical layer? (1) Repeater (2) Router (3) Transport Gateway (4) Bridge

Last Answer : Repeater

Which of the following device is used to connect two systems, especially if the systems use differentprotocols? A. hub B. bridge C. gateway D. repeater E. None of the above

Description : Which of the following device is used to connect two systems, especially if the systems use differentprotocols? A. hub B. bridge C. gateway D. repeater E. None of the above

Last Answer : gateway

What device separates asingle network into two segmentsbut lets the twosegments appear as one tohigher protocols? A. Switch B. Bridge C. Gateway D. Router

Description : What device separates asingle network into two segmentsbut lets the twosegments appear as one tohigher protocols? A. Switch B. Bridge C. Gateway D. Router

Last Answer : Bridge

A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Description : A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Last Answer : bridge

Frames from oneLAN can be transmitted to anotherLAN viathe device A. Router B. Bridge C. Repeater D. Modem

Description : Frames from oneLAN can be transmitted to anotherLAN viathe device A. Router B. Bridge C. Repeater D. Modem

Last Answer : Bridge

A __________ forwards every frame; it has no filteringcapability. A) passive hub B) repeater C) bridge D) router

Description : A __________ forwards every frame; it has no filteringcapability. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Description : A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

A _______ is a connecting devicethat operates in the physical and data link layers of theInternet model. A) repeater B) bridge C) router D) none of the above

Description : A _______ is a connecting devicethat operates in the physical and data link layers of theInternet model. A) repeater B) bridge C) router D) none of the above

Last Answer : bridge

In the following list of devices which device is used in network layer? (1) Repeaters (2) Router (3) Application Gateway (4) Switch

Description : In the following list of devices which device is used in network layer? (1) Repeaters (2) Router (3) Application Gateway (4) Switch

Last Answer : Router

A ________is a device in which the stations are completely unaware of its existence. A) passive hub B) repeater C) simple bridge D) transparent bridge

Description : A ________is a device in which the stations are completely unaware of its existence. A) passive hub B) repeater C) simple bridge D) transparent bridge

Last Answer : transparent bridge

A network router joins two _________ together? A. Computers B. Switches C. Networks D. Gateway

Description : A network router joins two _________ together? A. Computers B. Switches C. Networks D. Gateway

Last Answer : C. Networks

A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Description : A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Last Answer : physical

Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1) DSL modem 2) A multi-homed firewall 3) VLAN 4) A brouter that acts both as a bridge and a router

Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1) DSL modem 2) A multi-homed firewall 3) VLAN 4) A brouter that acts both as a bridge and a router

Last Answer : 2) A multi-homed firewall

Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1 DSL modem 2 A multi-homed firewall 3 VLAN 4 A brouter that acts both as a bridge and a router

Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1 DSL modem 2 A multi-homed firewall 3 VLAN 4 A brouter that acts both as a bridge and a router

Last Answer : 2 A multi-homed firewall

Which network component/s is/are involved in the Presentation layer of an OSI model? a. Gateway b. Multiplexer & Oscilloscope c. Amplifier & Hub d. All of the above

Description : Which network component/s is/are involved in the Presentation layer of an OSI model? a. Gateway b. Multiplexer & Oscilloscope c. Amplifier & Hub d. All of the above

Last Answer : a. Gateway

In the following list of devices, which device is used in datalink layer? (1) Repeaters (2) Routers (3) Application gateway (4) Bridge

Description : In the following list of devices, which device is used in datalink layer? (1) Repeaters (2) Routers (3) Application gateway (4) Bridge

Last Answer : Bridge

Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Description : Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Last Answer : c. Switch

A __________ is a device that forwards packets between networks by processing the routing information included in the packet.a) bridge b) firewall c) router d) hub

Description : A __________ is a device that forwards packets between networks by processing the routing information included in the packet. a) bridge b) firewall c) router d) hub

Last Answer : c) router

Which device uses logical addressing system?a. Hub b. Switch c. Bridge d. Router

Description : Which device uses logical addressing system? a. Hub b. Switch c. Bridge d. Router

Last Answer : d. Router

A ______ has a tableused in filtering decisions. A) passive hub B) repeater C) bridge D) none of the above

Description : A ______ has a tableused in filtering decisions. A) passive hub B) repeater C) bridge D) none of the above

Last Answer : bridge

A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Description : A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Last Answer : bridge

A _______regenerates a signal, connects segments of a LAN,and hasno filtering capability. A) repeater B) bridge C) routerD)none of the above

Description : A _______regenerates a signal, connects segments of a LAN,and hasno filtering capability. A) repeater B) bridge C) router D) none of the above

Last Answer : repeater

Which of the following is used as an intermediate to extend the processor BUS? A. Gateway B. Router C. Connector D. Bridge

Description : Which of the following is used as an intermediate to extend the processor BUS? A. Gateway B. Router C. Connector D. Bridge

Last Answer : D. Bridge

Main basic components of a data communication are composed of the following. A. Computer, modern and router B. Computer, bridge and gateway C. Transmitter, channel and receiver D. Transmitter, computer and modem

Description : Main basic components of a data communication are composed of the following. A. Computer, modern and router B. Computer, bridge and gateway C. Transmitter, channel and receiver D. Transmitter, computer and modem

Last Answer : C. Transmitter, channel and receiver

A _________ interconnects LAN having identical protocols at the physical and data link layers. A. All of these B. bridge C. router D. Gateway

Description : A _________ interconnects LAN having identical protocols at the physical and data link layers. A. All of these B. bridge C. router D. Gateway

Last Answer : B. bridge

The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : physical and data link

What type of network device allows youto share your connection to the Internet with other computers in your home? A) Ethernet card B) NIC C) Router D) Cat 5

Description : What type of network device allows youto share your connection to the Internet with other computers in your home? A) Ethernet card B) NIC C) Router D) Cat 5

Last Answer : Router

Which of the following is not a network device: a) Router b) Switch c) Modem d) Bridge e) None of The Above

Description : Which of the following is not a network device: a) Router b) Switch c) Modem d) Bridge e) None of The Above

Last Answer : e) None of The Above

State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Description : State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Last Answer : i) Repeater: Repeaters are used to take the distorted, weak and corrupt input signal and regenerate this signal at its output. It ensures that the signals are not distorted or weak before it ... and decides whether to forward or discard it. It sends packets between two networks of same type.

7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from the sender to the destination network. C. It uses a protocol that will be rejected by the gateway to determine the location. D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Description : 7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from ... the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Last Answer : D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

A repeater is a connecting device that operates in the _______ layer of the Internet model.

Description : A repeater is a connecting device that operates in the _______ layer of the Internet model.

Last Answer : physical

Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame. C. One of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Description : Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Last Answer : D) Gateway

The network layer contains which hardware device? a. Routers, Bridges b. Bridges onlyc. Bridges and switches d. Routers, Bridges and Switches

Description : The network layer contains which hardware device? a. Routers, Bridges b. Bridges only c. Bridges and switches d. Routers, Bridges and Switches

Last Answer : d. Routers, Bridges and Switches

The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer

Description : The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer

Last Answer : A) Physical layer

wifi router , wifi adapter , wifi repeater .... what can these do ? Tell me a little simple language ?

Description : wifi router , wifi adapter , wifi repeater .... what can these do ? Tell me a little simple language ?

Last Answer : WiFi router is a networking device that determines the path of data packets to their destination through different networks. The router does the work of "directing traffic" to the Internet. Many people can ... WiFi router. A WiFi repeater is a device used to amplify a signal and expand the network.

A _______ is a device that operates only in thephysical layerA)passive hubB)repeaterC)bridgeD)router

Description : A _______ is a device that operates only in the physical layer A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

Your company has a LAN in its downtown officeandhas now set upa LAN inthe manufacturing plant inthe suburbs. Toenable everyoneto sharedata and resources between the two LANs, what type of device(s) are neededto connect them? Choose the most correct answer. A. Modem B. Cable C. Hub D. Router

Description : Your company has a LAN in its downtown officeandhas now set upa LAN inthe manufacturing plant inthe suburbs. Toenable everyoneto sharedata and resources between the two LANs, what type of device(s) are neededto connect them? Choose the most correct answer. A. Modem B. Cable C. Hub D. Router

Last Answer : Router

What is the central device in star topology? a. STP serveb. Hub/switch c. PDC d. Router

Description : What is the central device in star topology? a. STP serve b. Hub/switch c. PDC d. Router

Last Answer : b. Hub/switch

________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : ________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : An activehub

A ________ is a repeater. A) regenerator B) ADM C) STS multiplexer/demultiplexer D) none of the above

Description : A ________ is a repeater. A) regenerator B) ADM C) STS multiplexer/demultiplexer D) none of the above

Last Answer : STS multiplexer/demultiplexer

The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Description : The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Last Answer : A. Time to Live (TTL)

hat information is conveyed by the SSID that is configured on an IoT device? a.the registration server b.he default gateway c.the wireless network d.the home gateway

Description : hat information is conveyed by the SSID that is configured on an IoT device? a.the registration server b.he default gateway c.the wireless network d.the home gateway

Last Answer : c.the wireless network

What is the term used todescribethe amount of space you have to transmit to and from the Internet? A) Internet speed B) Network speed C) Router D) Bandwidth

Description : What is the term used todescribethe amount of space you have to transmit to and from the Internet? A) Internet speed B) Network speed C) Router D) Bandwidth

Last Answer : Bandwidth

What interface card do you need toconnect to a network? A) ISP card B) Wireless card C) Router D) NIC

Description : What interface card do you need toconnect to a network? A) ISP card B) Wireless card C) Router D) NIC

Last Answer : NIC

The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

In OSPF, a ________ link is a network is connectedto only one router. A) point-to-point B) transient C) stub D) none of the above

Description : In OSPF, a ________ link is a network is connectedto only one router. A) point-to-point B) transient C) stub D) none of the above

Last Answer : stub

If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps

Description : If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps

Last Answer : 1000 bps