A __________ forwards every frame; it has no filteringcapability. A) passive hub B) repeater C) bridge D) router

A __________ forwards every frame; it has no filteringcapability.
A)
passive hub
B)
repeater
C)
bridge
D)
router
by

1 Answer

Answer :

repeater
by

Related questions

A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Description : A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Last Answer : bridge

A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Description : A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Description : A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Last Answer : bridge

A __________ is a device that forwards packets between networks by processing the routing information included in the packet.a) bridge b) firewall c) router d) hub

Description : A __________ is a device that forwards packets between networks by processing the routing information included in the packet. a) bridge b) firewall c) router d) hub

Last Answer : c) router

A ________is a device in which the stations are completely unaware of its existence. A) passive hub B) repeater C) simple bridge D) transparent bridge

Description : A ________is a device in which the stations are completely unaware of its existence. A) passive hub B) repeater C) simple bridge D) transparent bridge

Last Answer : transparent bridge

A ______ has a tableused in filtering decisions. A) passive hub B) repeater C) bridge D) none of the above

Description : A ______ has a tableused in filtering decisions. A) passive hub B) repeater C) bridge D) none of the above

Last Answer : bridge

Which of the following device is used to connect two systems, especially if the systems use differentprotocols? A. hub B. bridge C. gateway D. repeater E. None of the above

Description : Which of the following device is used to connect two systems, especially if the systems use differentprotocols? A. hub B. bridge C. gateway D. repeater E. None of the above

Last Answer : gateway

A _______ is a connecting devicethat operates in the physical and data link layers of theInternet model. A) repeater B) bridge C) router D) none of the above

Description : A _______ is a connecting devicethat operates in the physical and data link layers of theInternet model. A) repeater B) bridge C) router D) none of the above

Last Answer : bridge

Frames from oneLAN can be transmitted to anotherLAN viathe device A. Router B. Bridge C. Repeater D. Modem

Description : Frames from oneLAN can be transmitted to anotherLAN viathe device A. Router B. Bridge C. Repeater D. Modem

Last Answer : Bridge

A device operating at Physical layer is called a. Repeater b. Gateway c. Router d. Bridge

Description : A device operating at Physical layer is called a. Repeater b. Gateway c. Router d. Bridge

Last Answer : a. Repeater

A device operating at network layer is called a. Repeater b. Router c. Gateway d. Bridge

Description : A device operating at network layer is called a. Repeater b. Router c. Gateway d. Bridge

Last Answer : b. Router

Which device uses logical addressing system?a. Hub b. Switch c. Bridge d. Router

Description : Which device uses logical addressing system? a. Hub b. Switch c. Bridge d. Router

Last Answer : d. Router

Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Description : Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Last Answer : c. Switch

In RPF,a router forwards only the copy that has traveled the _______path from the source to the router. A) shortest B) longest C) average D) none of the above

Description : In RPF,a router forwards only the copy that has traveled the _______path from the source to the router. A) shortest B) longest C) average D) none of the above

Last Answer : shortest

In ______, the router forwards thereceived packet through only one of its interfaces. A) unicasting B) multicasting C) broadcasting D) none of the above

Description : In ______, the router forwards thereceived packet through only one of its interfaces. A) unicasting B) multicasting C) broadcasting D) none of the above

Last Answer : unicasting

In IT networking, which of the following device is used in physical layer? (1) Repeater (2) Router (3) Transport Gateway (4) Bridge

Description : In IT networking, which of the following device is used in physical layer? (1) Repeater (2) Router (3) Transport Gateway (4) Bridge

Last Answer : Repeater

A _______regenerates a signal, connects segments of a LAN,and hasno filtering capability. A) repeater B) bridge C) routerD)none of the above

Description : A _______regenerates a signal, connects segments of a LAN,and hasno filtering capability. A) repeater B) bridge C) router D) none of the above

Last Answer : repeater

_________is just aconnector. A) An activehub B) A passive hub C) either (a)or (b) D) neither (a)nor (b)

Description : _________is just aconnector. A) An activehub B) A passive hub C) either (a)or (b) D) neither (a)nor (b)

Last Answer : A passive hub

What isanother name fora sharednetwork? A) WAP B) Switch C) Broadband router D) Hub

Description : What isanother name fora sharednetwork? A) WAP B) Switch C) Broadband router D) Hub

Last Answer : Hub

Your company has a LAN in its downtown officeandhas now set upa LAN inthe manufacturing plant inthe suburbs. Toenable everyoneto sharedata and resources between the two LANs, what type of device(s) are neededto connect them? Choose the most correct answer. A. Modem B. Cable C. Hub D. Router

Description : Your company has a LAN in its downtown officeandhas now set upa LAN inthe manufacturing plant inthe suburbs. Toenable everyoneto sharedata and resources between the two LANs, what type of device(s) are neededto connect them? Choose the most correct answer. A. Modem B. Cable C. Hub D. Router

Last Answer : Router

What is the central device in star topology? a. STP serveb. Hub/switch c. PDC d. Router

Description : What is the central device in star topology? a. STP serve b. Hub/switch c. PDC d. Router

Last Answer : b. Hub/switch

A _____ is a computer, appliance, or router that sits between the trusted and untrusted systems. (1) bridge (2) switch (3) firewall (4) hub

Description : A _____ is a computer, appliance, or router that sits between the trusted and untrusted systems. (1) bridge (2) switch (3) firewall (4) hub

Last Answer : firewall

A _______ is a device that operates only in thephysical layerA)passive hubB)repeaterC)bridgeD)router

Description : A _______ is a device that operates only in the physical layer A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

A star connected intermediate exchange is known as a (A) Repeater exchange (B) Hub exchange (C) Private branch exchange (D) Tandem exchange

Description : A star connected intermediate exchange is known as a (A) Repeater exchange (B) Hub exchange (C) Private branch exchange (D) Tandem exchange

Last Answer : (B) Hub exchange

What device separates asingle network into two segmentsbut lets the twosegments appear as one tohigher protocols? A. Switch B. Bridge C. Gateway D. Router

Description : What device separates asingle network into two segmentsbut lets the twosegments appear as one tohigher protocols? A. Switch B. Bridge C. Gateway D. Router

Last Answer : Bridge

A station in a network forwards incoming packets byplacing them on its shortest output queue. Whatrouting algorithm is being used? A. hot potatorouting B. flooding C. static routing D. delta routing E. None of the above

Description : A station in a network forwards incoming packets byplacing them on its shortest output queue. Whatrouting algorithm is being used? A. hot potatorouting B. flooding C. static routing D. delta routing E. None of the above

Last Answer : hot potatorouting

wifi router , wifi adapter , wifi repeater .... what can these do ? Tell me a little simple language ?

Description : wifi router , wifi adapter , wifi repeater .... what can these do ? Tell me a little simple language ?

Last Answer : WiFi router is a networking device that determines the path of data packets to their destination through different networks. The router does the work of "directing traffic" to the Internet. Many people can ... WiFi router. A WiFi repeater is a device used to amplify a signal and expand the network.

________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : ________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : An activehub

A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Description : A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Last Answer : physical

A ________ is a repeater. A) regenerator B) ADM C) STS multiplexer/demultiplexer D) none of the above

Description : A ________ is a repeater. A) regenerator B) ADM C) STS multiplexer/demultiplexer D) none of the above

Last Answer : STS multiplexer/demultiplexer

Discuss the role of the HUB. Differentiate between Active Hub and Passive Hub.

Description : Discuss the role of the HUB. Differentiate between Active Hub and Passive Hub.

Last Answer : HUB: Hub is a connecting device; it is also known as multiport repeater. It is normally used for connecting stations in a physical star topology All networks require a central location to bring media segments ... . They are much expensive than passive hubs. 4. They are not much expensive.

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Can my wireless hub-router handle a houseful?

Description : Can my wireless hub-router handle a houseful?

Last Answer : Unless everyone spends their time watching streaming video, you will be fine. For most purposes, the Internet is slower than your cable connection and your WiFi.

Describe Hub, Switch and Router?

Description : Describe Hub, Switch and Router?

Last Answer :  Hub: Hub will broadcast all data to every port. It has a common connection point for all devices.  Switch: Switch will create the dynamic connection and provide information to the ... be responsible for forwarding data packets. Let us move to the next Computer Network Interview Questions.

A USB communication device that supports data encryption for secure wireless communication for notebook users is called a a) USB wireless network adapter b) wireless switch c) wireless hub d) router e) None of these

Description : A USB communication device that supports data encryption for secure wireless communication for notebook users is called a a) USB wireless network adapter b) wireless switch c) wireless hub d) router e) None of these

Last Answer : a) USB wireless network adapter

Which one of the following is not a network device? (A) Router (B) Switch (C) Hub (D) CPU

Description : Which one of the following is not a network device? (A) Router (B) Switch (C) Hub (D) CPU

Last Answer : Answer: D

Which topology requires acentral controller or hub? A) Mesh B) Star C) Bus D) Ring

Description : Which topology requires acentral controller or hub? A) Mesh B) Star C) Bus D) Ring

Last Answer : Star

was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above

Description : was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above

Last Answer : a. Star LAN

Which of the following is/ are the drawbacks of Ring Topology? A) Failure of one computer, can affect the whole network B) Adding or removing the computers disturbs the network activity. C) If the central hub fails, the whole network fails to operate. D) Both of A and B

Description : Which of the following is/ are the drawbacks of Ring Topology? A) Failure of one computer, can affect the whole network B) Adding or removing the computers disturbs the network activity. C) If the central hub fails, the whole network fails to operate. D) Both of A and B

Last Answer : D) Both of A and B

If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Last Answer : C) Star Topology

Which network component/s is/are involved in the Presentation layer of an OSI model? a. Gateway b. Multiplexer & Oscilloscope c. Amplifier & Hub d. All of the above

Description : Which network component/s is/are involved in the Presentation layer of an OSI model? a. Gateway b. Multiplexer & Oscilloscope c. Amplifier & Hub d. All of the above

Last Answer : a. Gateway

There are 10 users plugged into a hub running 10Mbps half-duplex.and a serverconnected to the switch running 10Mbps half- duplex as well. Find the bandwidth does each host have to the server? a. 100 kbps b. 1 Mbps c. 2 Mbps d. 10 Mbps

Description : There are 10 users plugged into a hub running 10Mbps half-duplex.and a server connected to the switch running 10Mbps half- duplex as well. Find the bandwidth does each host have to the server? a. 100 kbps b. 1 Mbps c. 2 Mbps d. 10 Mbps

Last Answer : d. 10 Mbps

What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layerB. Switches operate at data link layer while hubs operate at transport layer C. Switches operate at data link layer while hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Description : What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at ... hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Last Answer : C. Switches operate at data link layer while hubs operate at physical layer

What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at transport layer C. Switches operate at data link layer while hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Description : What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at ... hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Last Answer : C. Switches operate at data link layer while hubs operate at physical layer

Which network topology requires a central controller or hub? a) Star b) Mesh c) Ring d) Bus

Description : Which network topology requires a central controller or hub? a) Star b) Mesh c) Ring d) Bus

Last Answer : a) Star

Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a physical layer device, and a switch is a data link layer device. C. A hub causes larger collision domains. D. Hubs are more sophisticated versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Description : Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a ... versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Last Answer : b. A,B,C

In __________, eachpacket is treatedindependentlyof all others. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In __________, eachpacket is treatedindependentlyof all others. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Last Answer : from left to the right, bottom to top

An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Description : An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Last Answer : IP

In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching