A __________ is a device that forwards packets between
networks by processing the routing information included in
the packet.
a) bridge
b) firewall
c) router
d) hub

1 Answer

Answer :

c) router

Related questions

Description : A __________ forwards every frame; it has no filteringcapability. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

Description : A station in a network forwards incoming packets byplacing them on its shortest output queue. Whatrouting algorithm is being used? A. hot potatorouting B. flooding C. static routing D. delta routing E. None of the above

Last Answer : hot potatorouting

Description : In ______, the router forwards thereceived packet through only one of its interfaces. A) unicasting B) multicasting C) broadcasting D) none of the above

Last Answer : unicasting

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which device uses logical addressing system? a. Hub b. Switch c. Bridge d. Router

Last Answer : d. Router

Description : Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Last Answer : c. Switch

Description : A _____ is a computer, appliance, or router that sits between the trusted and untrusted systems. (1) bridge (2) switch (3) firewall (4) hub

Last Answer : firewall

Description : The taskof moving the packet from theinput queue to the output queuein a router is done by_________. A) input and output ports B) routing processor C) switching fabrics D) none of the above

Last Answer : switching fabrics

Description : A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Last Answer : bridge

Description : A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

Description : Your company has a LAN in its downtown officeandhas now set upa LAN inthe manufacturing plant inthe suburbs. Toenable everyoneto sharedata and resources between the two LANs, what type of device(s) are neededto connect them? Choose the most correct answer. A. Modem B. Cable C. Hub D. Router

Last Answer : Router

Description : What is the central device in star topology? a. STP serve b. Hub/switch c. PDC d. Router

Last Answer : b. Hub/switch

Description : The ________is a network layer Internet protocol that provides message packets to report errors and other information regarding IP packet processing back to the source: a) Internet Control Message ... Standard Flexible Message Protocol c) Internet Dynamic Chartered Message Protocol d) None of These

Last Answer : a) Internet Control Message Protocol

Description : In RPF,a router forwards only the copy that has traveled the _______path from the source to the router. A) shortest B) longest C) average D) none of the above

Last Answer : shortest

Description : Filtering of packets by firewall based on a router has facilities to a. i, iii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Last Answer : b. i, ii, iiiĀ 

Description : Firewall as part of a router program a. filters only packets coming from internet b. filters only packets going to internet c. filters packets travelling from and to the intranet from the internet d. ensures rapid traffic of packets for speedy e-Commerce

Last Answer : c. filters packets travelling from and to the intranet from the internetĀ 

Description : A ________is a device in which the stations are completely unaware of its existence. A) passive hub B) repeater C) simple bridge D) transparent bridge

Last Answer : transparent bridge

Description : Which of the following device is used to connect two systems, especially if the systems use differentprotocols? A. hub B. bridge C. gateway D. repeater E. None of the above

Last Answer : gateway

Description : Which of the following is not correct in relation to multi-destination routing? a. is same as broadcast routing b. contains the list of all destinations c. data is not sent by packets d. there are multiple receivers

Last Answer : c. data is not sent by packets

Description : Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1) Application layer Firewall 2) Packet Filtering Firewall 3) Router enhanced firewall 4) IP enabled firewall

Last Answer : 2) Packet Filtering Firewall

Description : Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1 Application layer Firewall 2 Packet Filtering Firewall 3 Router enhanced firewall 4 IP enabled firewall

Last Answer : 2 Packet Filtering Firewall

Description : A packet filtering firewall can a. deny certain users from accessing a service b. block worms and viruses from entering the network c. disallow some files from being accessed through FTP d. block some hosts from accessing the network

Last Answer : d. block some hosts from accessing the network

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

Description : Consider a link with packet loss probability of 0.2. What is the expected number of transmissions it would take to transfer 200 packets given that the stop and wait protocol is used? a. 125 b. 250 c. 225

Last Answer : b. 250

Description : Which of the following statement is False about the efficiency of the given channel? a. If we want to send big packets on the channel, then Stop and Wait is good choice. b. If length ... is directly proportional to efficiency of channel. d. Efficient might be less if capacity of channel is high

Last Answer : Distance between sender and receiver is directly proportional to efficiency of channel.

Description : State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). ... C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : A. 1. True, 2. true, 3. true

Description : ______ is a static algorithm in which every incoming packet is sent out on every outgoing line except the one it arrives on. This method usually generates vast number of duplicate packets.. A. Flooding B. Wait and watch C. congestion D. both a and c

Last Answer : A. Flooding

Description : In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A ... lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets

Last Answer : B. Only those packets which are lost or corrupted

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

Description : f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : hedestination IP address in the datagram header

Description : Which of the following is not a congestion policy at network layer? a. Flow Control Policy b. Packet Discard Policy c. Packet Lifetime Management Policy d. Routing Algorithm

Last Answer : a. Flow Control Policy

Description : What device separates asingle network into two segmentsbut lets the twosegments appear as one tohigher protocols? A. Switch B. Bridge C. Gateway D. Router

Last Answer : Bridge

Description : Frames from oneLAN can be transmitted to anotherLAN viathe device A. Router B. Bridge C. Repeater D. Modem

Last Answer : Bridge

Description : A device operating at Physical layer is called a. Repeater b. Gateway c. Router d. Bridge

Last Answer : a. Repeater

Description : A device operating at network layer is called a. Repeater b. Router c. Gateway d. Bridge

Last Answer : b. Router

Description : A _____ should be considered as a means to divide the world into two or more networks: one or more secure networks and one or more non-secure networks. A. firewall B. ESP C. SSL D. both a and b

Last Answer : A. firewall

Description : For purposes of routing, the Internet isdivided into ___________. A) wide area networks B) autonomous networks C) autonomous systems D) none of the above

Last Answer : autonomous systems

Description : What isanother name fora sharednetwork? A) WAP B) Switch C) Broadband router D) Hub

Last Answer : Hub

Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

Description : The sender is a router thathas receiveda datagram destinedfor a host on anothernetwork. The logicaladdress that must be mapped to aphysical address is ______. A) thedestination IP address in the datagram header ... address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

Description : In unicast routing,each router in the domain has a table thatdefines a______ path tree to possible destinations. A) average B) longest C) shortest D) none of the above

Last Answer : shortest

Description : State weather the following statement is true or false for Hierarchical Routing 1). In hierarchical routing, the routers are divided into regions. 2) Each router is having the idea about internal structure of other regions 3). ... C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Last Answer : D. 1. true, 2. false, 3. true

Description : Does a Network Bridge have it's own hardware firewall like a router?

Last Answer : A network bridge usually doesn't come with a firewall, just the router.

Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1) DSL modem 2) A multi-homed firewall 3) VLAN 4) A brouter that acts both as a bridge and a router

Last Answer : 2) A multi-homed firewall

Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1 DSL modem 2 A multi-homed firewall 3 VLAN 4 A brouter that acts both as a bridge and a router

Last Answer : 2 A multi-homed firewall

Description : Packet-switched networks can alsobe divided into ______subcategories: virtual-circuit networks and datagram networks A) four B) three C) two D) five

Last Answer : two

Description : In _______delivery, the deliverer of theIP packet and the destination are on different networks. A) aconnection-oriented B) a direct C) an indirect D) none of the above

Last Answer : an indirect

Description : What is one advantage of setting up a DMZ(Demilitarized Zone) with two firewalls? a. You can control where traffic goes in the three networks b. You can do stateful packet filtering c. You can do load balancing d. Improve network performance

Last Answer : a. You can control where traffic goes in the three networks