Description : What device separates asingle network into two segmentsbut lets the twosegments appear as one tohigher protocols? A. Switch B. Bridge C. Gateway D. Router
Last Answer : Bridge
Description : A device operating at network layer is called a. Repeater b. Router c. Gateway d. Bridge
Last Answer : b. Router
Description : Network layer protocol exits in _________ a. Host b. Switches c. Packets d. Bridges
Last Answer : a. Host
Description : In the original ARPANET,_______ were directly connected together. A) IMPs B) host computers C) networks D) routers
Last Answer : IMPs
Description : The secondgeneration of cable networks is called a(n) _________ network. A) HFC B) HCF C) CFH D) none of the above
Last Answer : HFC
Description : A device operating at Physical layer is called a. Repeater b. Gateway c. Router d. Bridge
Last Answer : a. Repeater
Description : What type of network device allows youto share your connection to the Internet with other computers in your home? A) Ethernet card B) NIC C) Router D) Cat 5
Last Answer : Router
Description : A _________ interconnects LAN having identical protocols at the physical and data link layers. A. All of these B. bridge C. router D. Gateway
Last Answer : B. bridge
Description : A __________ is a device that forwards packets between networks by processing the routing information included in the packet. a) bridge b) firewall c) router d) hub
Last Answer : c) router
Description : The network layer consists of which hardware devices? A. Router B. Bridges C. Switches D. All of the above
Last Answer : D. All of the above
Description : The network layer contains which hardware device? a. Routers, Bridges b. Bridges only c. Bridges and switches d. Routers, Bridges and Switches
Last Answer : d. Routers, Bridges and Switches
Description : Congestion in a network or internetwork occurs because routers and switches have _______. A. tables B. queues C. crosspoints D. none of the above
Last Answer : B. queues
Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1) DSL modem 2) A multi-homed firewall 3) VLAN 4) A brouter that acts both as a bridge and a router
Last Answer : 2) A multi-homed firewall
Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1 DSL modem 2 A multi-homed firewall 3 VLAN 4 A brouter that acts both as a bridge and a router
Last Answer : 2 A multi-homed firewall
Description : 7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from ... the TTL value in an ICMP message to determine the number of hops from the sender to the router.
Last Answer : D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.
Description : In the following list of devices which device is used in network layer? (1) Repeaters (2) Router (3) Application Gateway (4) Switch
Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above
Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame
Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above
Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size
Description : Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway
Last Answer : D) Gateway
Description : Which network component/s is/are involved in the Presentation layer of an OSI model? a. Gateway b. Multiplexer & Oscilloscope c. Amplifier & Hub d. All of the above
Last Answer : a. Gateway
Description : Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway
Last Answer : c. Switch
Description : A group of computers and other devices connected together is called ……………. A. Network B. Networking C. Intranet D. both b and c
Last Answer : A. Network
Description : A group of computers and other devices connected together is called ……………. a. Intranet b. Network c. None of these d. Networking
Last Answer : b. Network
Description : In computer networks _________ is a characteristic that a flow needs where Lack of it means losing a packet or acknowledgment, which entails retransmission. A. Reliability B. Delay C. Jitter D. Bandwidth
Last Answer : A. Reliability
Description : In the group-shared tree approach,_________ involved in multicasting. A) only the core router is B) all routers are C) only some routers are D) none of the above
Last Answer : only the core router is
Description : What is one advantage of setting up a DMZ(Demilitarized Zone) with two firewalls? a. You can control where traffic goes in the three networks b. You can do stateful packet filtering c. You can do load balancing d. Improve network performance
Last Answer : a. You can control where traffic goes in the three networks
Description : The purpose of a proxy server is to control exchange of data between the two networks at …………..instead of ……….. A. an application level , an IP level B. network layer, physical layer C. an application layer, physical layer D. Network layer , an application layer
Last Answer : A. an application level , an IP level
Description : Frame Relay networks offer an optioncalled ______________that sends voice through the network. A) VOFR B) FRAD C) MUX D) none of the above
Last Answer : VOFR
Description : You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and192.168.7.0. What subnet mask can you use to combine these addresses intoone? A. 255.255.252.0 B. 225.255.254.0 C. 255.255.255.240 D. 255.255.255.252
Last Answer : 255.255.252.0
Description : Which of the following statements is correct for the use of packet switching? A. the subdivision of information into individuallyaddressed packets in conjunction with alternativerouting arrangementenabled the transmission path ... capacity could be achieved. D. All of theabove E. None of the above
Last Answer : All of theabove
Description : Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii only c. Both A and B d. None of the above
Last Answer : a. i only
Description : The ability of a single network to span multiple physical networks is known as ______ a. Subnetting b. Masking c. Fragmenting d. Hopping
Last Answer : a. Subnetting
Description : . In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D
Last Answer : C. class B
Description : What is the term used todescribethe amount of space you have to transmit to and from the Internet? A) Internet speed B) Network speed C) Router D) Bandwidth
Last Answer : Bandwidth
Description : What interface card do you need toconnect to a network? A) ISP card B) Wireless card C) Router D) NIC
Last Answer : NIC
Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above
Last Answer : thedestination IP address in the datagram header
Description : In OSPF, a ________ link is a network is connectedto only one router. A) point-to-point B) transient C) stub D) none of the above
Last Answer : stub
Description : The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above
Last Answer : physical and data link
Description : If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps
Last Answer : 1000 bps
Description : The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b
Last Answer : A. Time to Live (TTL)
Description : A device that connects two dissimilar networks and performs the protocol conversion. A. Gateway B. Coupler C. Transformer D. Converter
Last Answer : A. Gateway
Description : _________is the interface between two ATM switches. A) UNI B) NNI C) NNN D) none of the above
Last Answer : NNI
Description : A ________ switch combines crossbar switches inseveral (normally three) stages. A) multistage B) multiple crossbar C) multiple path D) none of the above
Last Answer : multistag
Description : A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above
Last Answer : circuit-switched
Description : In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)
Last Answer : PVC
Description : The _____ houses the switches in token ring. A. transceiver B. nine-pin connector C. MAU D. NIC E. None of the above
Last Answer : MAU
Description : What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at ... hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer
Last Answer : C. Switches operate at data link layer while hubs operate at physical layer
Description : Most packet switches use this principle ____________ a) Stop and wait b) Store and forward c) Store and wait d) Stop and forward
Last Answer : b) Store and forward
Description : Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a ... versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D
Last Answer : b. A,B,C