A network is a cross between a circuit-switched network and a datagram network. It has some characteristics of both. a. virtual-circuit b. packet-switchedc. None of the Given d. frame-switched

A network is a cross between a circuit-switched network and a
datagram network. It has some characteristics of both.
a. virtual-circuit
b. packet-switched
c. None of the Given
d. frame-switched
by

1 Answer

Answer :

a. virtual-circuit
by

Related questions

A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Description : A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Last Answer : virtual-circui

Packet-switched networks can alsobe divided into ______subcategories: virtual-circuit networks and datagram networks A) four B) threeC)twoD)five

Description : Packet-switched networks can alsobe divided into ______subcategories: virtual-circuit networks and datagram networks A) four B) three C) two D) five

Last Answer : two

The network layer in the Internet isdesigned as a __________network. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Description : The network layer in the Internet isdesigned as a __________network. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Last Answer : datagram

In a ________ network, twotypes of addressing are involved: global and local. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Description : In a ________ network, twotypes of addressing are involved: global and local. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Last Answer : virtual-circuit

A switched WAN is normally implemented as a _______ network. A) virtual-circuitB) datagram C) circuit-switched D) none of the above

Description : A switched WAN is normally implemented as a _______ network. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Last Answer : virtual-circuit

The network layer in the Internet is designed as anetwork. a. datagram b. none c. virtual-circuit d. circuit-switched

Description : The network layer in the Internet is designed as anetwork. a. datagram b. none c. virtual-circuit d. circuit-switched

Last Answer : a. datagram

In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

A local telephone network isan example of a_______ network. A) packet-switched B) circuit-switched C) message-switched D) none of the above

Description : A local telephone network isan example of a_______ network. A) packet-switched B) circuit-switched C) message-switched D) none of the above

Last Answer : circuit-switched

BSNL land line telephone network is an example of a network. A. Packet switched B. Circuit switched C. Bit switched D. Line switched

Description : BSNL land line telephone network is an example of a network. A. Packet switched B. Circuit switched C. Bit switched D. Line switched

Last Answer : B. Circuit switched

A local telephone network is an example of a _______ network. a) Packet switched b) Circuit switched c) Bit switched d) Line switched

Description : A local telephone network is an example of a _______ network. a) Packet switched b) Circuit switched c) Bit switched d) Line switched

Last Answer : b) Circuit switched

A local telephone network is an example of a network. a. Packet switched b. Circuit switched c. Bit switched d. Line switched

Description : A local telephone network is an example of a network. a. Packet switched b. Circuit switched c. Bit switched d. Line switched

Last Answer : b. Circuit switched

_____ is used for transmission of packets in the cellular switched architecture. a) Packet switching techniques b) Circuit switching techniques c) Packet and circuit switched technique d) Datagram technique

Description : _____ is used for transmission of packets in the cellular switched architecture. a) Packet switching techniques b) Circuit switching techniques c) Packet and circuit switched technique d) Datagram technique

Last Answer : a) Packet switching techniques

If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Description : In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Last Answer : b. a short VC number

In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Description : In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Last Answer : B. a short VC number

The required resources for communication between end systems are reserved for theduration of the session between end systems in method. a. Packet switched b. Bit switched c. Line switched d. Circuit switched

Description : The required resources for communication between end systems are reserved for theduration of the session between end systems in method. a. Packet switched b. Bit switched c. Line switched d. Circuit switched

Last Answer : d. Circuit switched

Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame. C. One of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In __________, eachpacket is treatedindependentlyof all others. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In __________, eachpacket is treatedindependentlyof all others. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In _________, resources areallocatedon demand. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _________, resources areallocatedon demand. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : circuit switching

In ATM,_____ is for conventionalpacket switching(virtual-circuit approachor datagram approach). A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Description : In ATM,_____ is for conventionalpacket switching(virtual-circuit approachor datagram approach). A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Last Answer : AAL3/4

________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above

Description : ________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above

Last Answer : Frame Relay

A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above

Description : A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above

Last Answer : circuit-switched

Differentiate switched virtual circuit and Permanent virtual circuit.

Description : Differentiate switched virtual circuit and Permanent virtual circuit.

Last Answer : Switched virtual circuit format is comparable conceptually to dial-up line in circuit switching. In this method, a virtual circuit is created whenever it is needed and exits only for the duration of ... provided between two uses on a continuous basis. The circuit is dedicated to the specific uses.

The ________is a circuit-switched network, while the ______is a packet-switched network. (A) Telephone, ATM (B) SONET and FDDI (C) Satellite, Telephone (D) FDDI and SONET

Description : The ________is a circuit-switched network, while the ______is a packet-switched network. (A) Telephone, ATM (B) SONET and FDDI (C) Satellite, Telephone (D) FDDI and SONET

Last Answer : (A) Telephone, ATM

Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Description : Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Last Answer : Base header

f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : hedestination IP address in the datagram header

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. Discard packets that reach later than that time c. Prevent packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

Which among the below stated datagram discard code fields in ICMP is/are generated if a router fails to forward a packet due to administrative filtering? a. Source Route Failed b. Communication Administratively Prohibited c. Host Precedence Violation d. Precedence Cut-off in Effect

Description : Which among the below stated datagram discard code fields in ICMP is/are generated if a router fails to forward a packet due to administrative filtering? a. Source Route Failed b. Communication Administratively Prohibited c. Host Precedence Violation d. Precedence Cut-off in Effect

Last Answer : b. Communication Administratively Prohibited

State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). An IPV6 packet consists of an IPV6 header and an IPV6 payload. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). ... C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : A. 1. True, 2. true, 3. true

In datagram subnet new route is chosen ………………… (A) for every packet sent (B) for first and last packet sent (C) only for the first packet (D) for the packet which is not transmitted

Description : In datagram subnet new route is chosen ………………… (A) for every packet sent (B) for first and last packet sent (C) only for the first packet (D) for the packet which is not transmitted

Last Answer : (A) for every packet sent

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

There are two types of designs for communication subnets: they are ………… A. Point-to-Point channels and Broadcast channels B. packet-switched subnet and store-and-forward C. Multicasting and Broadcasting D. Point-to-Point channels and store-and-forward

Description : There are two types of designs for communication subnets: they are ………… A. Point-to-Point channels and Broadcast channels B. packet-switched subnet and store-and-forward C. Multicasting and Broadcasting D. Point-to-Point channels and store-and-forward

Last Answer : A. Point-to-Point channels and Broadcast channels

In IPv4, when a datagram is encapsulated in a frame, the total sizeof the datagram must beless thanthe _______. A) MUT B) MAT C) MTU D) noneof the above

Description : In IPv4, when a datagram is encapsulated in a frame, the total sizeof the datagram must beless thanthe _______. A) MUT B) MAT C) MTU D) noneof the above

Last Answer : MTU

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

The protocol data unit (PDU) for the application layer in the Internet stack is?a. Datagram b. Frame c. Message d. Segment

Description : The protocol data unit (PDU) for the application layer in the Internet stack is? a. Datagram b. Frame c. Message d. Segment

Last Answer : c. Message

The protocol data unit PDU for the Transport layer in the Internet stack is A. Segment B. Datagram C. Message/Data D. Frame

Description : The protocol data unit PDU for the Transport layer in the Internet stack is A. Segment B. Datagram C. Message/Data D. Frame

Last Answer : A. Segment

The protocol data unit(PDU) for the application layer in the Internet stack is (A) Segment (B) Datagram (C) Message/Data (D) Frame

Description : The protocol data unit(PDU) for the application layer in the Internet stack is (A) Segment (B) Datagram (C) Message/Data (D) Frame

Last Answer : (C) Message/Data

Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet frame includes a CRC field and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Description : Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet ... and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Last Answer : Ethernet frame includes a CRC field and IP packet includes a checksum field

The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Description : The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Last Answer : A. Time to Live (TTL)

Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above

Description : Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above

Last Answer : token passing: token

A _______is defined as a small, fixed-size block of information. A) frame B) packet C) cell D) none of the above

Description : A _______is defined as a small, fixed-size block of information. A) frame B) packet C) cell D) none of the above

Last Answer : cell

An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Description : An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Last Answer : IP

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errorsd. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

Which of the following term describes PDU encapsulated at Transport Layer? a. Frame b. Packet c. Data d. Segment

Description : Which of the following term describes PDU encapsulated at Transport Layer? a. Frame b. Packet c. Data d. Segment

Last Answer : d. Segment