In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

In an Ethernet local area network, which one
of the following statements is TRUE ?
a. A station stops to sense the channel
once it starts transmitting a frame.
b. The purpose of the jamming signal is
to pad the frames that are smaller than
the minimum frame size.
c. A station continues to transmit the
packet even after the collision is
detected.
d. The exponential backoff mechanism
reduces the probability of collision
on retransmissions
by

1 Answer

Answer :

The exponential backoff mechanism
reduces the probability of collision
on retransmissions
by

Related questions

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s.b. 2 c. 2.5 d. 5

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet frame includes a CRC field and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Description : Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet ... and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Last Answer : Ethernet frame includes a CRC field and IP packet includes a checksum field

An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Description : An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Last Answer : IP

. If there is only one station with a packet to send, this guarantees that there will ………….. For that packet. A. never be a collision B. be a collision C. be an improvement D. direction

Description : . If there is only one station with a packet to send, this guarantees that there will ………….. For that packet. A. never be a collision B. be a collision C. be an improvement D. direction

Last Answer : A. never be a collision

The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is approximately equal to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Description : The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is ... to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Last Answer : 0.009

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CD

Suppose there are n stations in a slotted LAN. Each station attempts to transmit with a probability P in each time slot. The probability that only one station transmits in a given slot is _______. a. nP(1 – P)n – 1 b. nP c. P(1 – P)n – 1 d. n P (1 – P)n – 1

Description : Suppose there are n stations in a slotted LAN. Each station attempts to transmit with a probability P in each time slot. The probability that only one station transmits in a given slot is _______. a. nP(1 – P)n – 1 b. nP c. P(1 – P)n – 1 d. n P (1 – P)n – 1

Last Answer : a. nP(1 – P)n – 1

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errorsd. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Description : A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Last Answer : (B) 0.184

An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Description : An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Last Answer : D. 99.7 MHz

The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Description : The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Last Answer : none of the above

State weather the following statement is true or false for Token Bus 1).It is a linear or tree- shaped cable onto which the stations are attached. 2). the token propagates around the logical ring, with only the token holder being permitted to transmit frames 3). In this token bus arrangement The physical order in which the stations are connected to the cable is very important. A. 1. False, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Description : State weather the following statement is true or false for Token Bus 1).It is a linear or tree- shaped cable onto which the stations are attached. 2). the token propagates around the logical ring, with only the token holder ... 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : D. 1. true, 2. true, 3. false

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

Last Answer : b. 2 Mbps

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Last Answer : a. 2 Mbps

A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Description : A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Last Answer : virtual-circui

A network is a cross between a circuit-switched network and a datagram network. It has some characteristics of both. a. virtual-circuit b. packet-switchedc. None of the Given d. frame-switched

Description : A network is a cross between a circuit-switched network and a datagram network. It has some characteristics of both. a. virtual-circuit b. packet-switched c. None of the Given d. frame-switched

Last Answer : a. virtual-circuit

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Last Answer : b. 0.184

In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Description : In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Last Answer : c. Jam

Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors will be undetected whenan error detection scheme is used C. the probability thatone or more errors will bedetected when anerror detection mechanism is used D. signal tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Description : Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors ... tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Last Answer : The probability that one or moreerrors will be undetected whenan error detection scheme is used

Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocolc. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Last Answer : CSMA/CD is not suitable for a high propagation delay

If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Description : If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Last Answer : a. Try another appropriate frequency

If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Description : If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Last Answer : a. Try another appropriate frequency

Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Description : Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Last Answer : Collision

A _______is defined as a small, fixed-size block of information. A) frame B) packet C) cell D) none of the above

Description : A _______is defined as a small, fixed-size block of information. A) frame B) packet C) cell D) none of the above

Last Answer : cell

Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport

Description : Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport

Last Answer : a. End system

Application layer is implemented in ____________ a) End system b) NIC c) Ethernet d) Packet transport

Description : Application layer is implemented in ____________ a) End system b) NIC c) Ethernet d) Packet transport

Last Answer : a) End system

Internet access by transmitting digital data over the wires of a local telephone network is provided by  leased line  digital subscriber line  digital signal line  None of the Above

Description : Internet access by transmitting digital data over the wires of a local telephone network is provided by  leased line  digital subscriber line  digital signal line  None of the Above

Last Answer :  digital subscriber line

Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B is 128 kbps. What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Description : Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B ... What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Last Answer : b. 40

A local telephone network isan example of a_______ network. A) packet-switched B) circuit-switched C) message-switched D) none of the above

Description : A local telephone network isan example of a_______ network. A) packet-switched B) circuit-switched C) message-switched D) none of the above

Last Answer : circuit-switched

The _______ address in theheader ofa packet in adatagram network normally remains thesame during the entire journeyof the packet. A) source B) destination C) local D) none of the above

Description : The _______ address in theheader ofa packet in adatagram network normally remains thesame during the entire journeyof the packet. A) source B) destination C) local D) none of the above

Last Answer : destination

A local telephone network is an example of a _______ network. a) Packet switched b) Circuit switched c) Bit switched d) Line switched

Description : A local telephone network is an example of a _______ network. a) Packet switched b) Circuit switched c) Bit switched d) Line switched

Last Answer : b) Circuit switched

A local telephone network is an example of a network. a. Packet switched b. Circuit switched c. Bit switched d. Line switched

Description : A local telephone network is an example of a network. a. Packet switched b. Circuit switched c. Bit switched d. Line switched

Last Answer : b. Circuit switched

The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Description : In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Last Answer : (4) 5 bytes 

______ is the most widelyused local area networkprotocol. A) Token Ring B) Token Bus C) Ethernet D) none of the above

Description : ______ is the most widelyused local area networkprotocol. A) Token Ring B) Token Bus C) Ethernet D) none of the above

Last Answer : Ethernet

Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Description : Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Last Answer : b. Sender Sliding Window

Which ARQ mechanism deals with the transmission of only damaged or lost frames despite the other multiple frames by increasing the efficiency & its utility in noisy channels? a. GoBackN ARQ b. Selective Repeat ARQ c. StopandWait ARQ d. All of the above

Description : Which ARQ mechanism deals with the transmission of only damaged or lost frames despite the other multiple frames by increasing the efficiency & its utility in noisy channels? a. GoBackN ARQ b. Selective Repeat ARQ c. StopandWait ARQ d. All of the above

Last Answer : b. Selective Repeat ARQ

Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Description : Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Last Answer : B. Sender Sliding Window

Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for Modems) b. Frame Relay protocol as LAPF (Link Access Procedure for Frame Relay) c. ISDN (Integrated Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

- MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Description : - MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Last Answer : DLCI

In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Last Answer : CRC

In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Last Answer : preamble